Manualios.com

Panasonic KV-S7075C Operating Manual

Panasonic KV-S7075C Manual Online:

4.15, 2902 votes
Panasonic KV-S7075C User Manual
Panasonic KV-S7075C User Guide
Panasonic KV-S7075C Online Manual

Text of Panasonic KV-S7075C User Guide:

  • Panasonic KV-S7075C, Cleaning the Unit 36 ∫ Cleaning the drive rollers, free rollers, and exit rollers 1 Turn off the scanner. 2 Pull the exit door release to open the exit door. 3 Use the roller cleaning paper (KV- SS03) to remove the dirt from the surfaces of the 4 drive rollers and the 2 exit rollers. ≥ When wiping off the dirt on the roller surfaces, hold the rollers to prevent them from rotating, and wipe the roller all the way around them proceeding from one end to the other in the direction of the arrows shown in the figure. 4 Use the roller cleaning paper (KV- SS03) to remove the dirt from the

  • 41 Replacing Consumable Roller Modules ∫ Replacing paper feed roller modules Recommended change: 300,000 scans 1 Turn the power off. 2 Push the ADF door release to open the ADF door. 3 Pull down the paper feed roller module in the direction of the arrow. 4 Remove the paper feed roller module as shown on the figure. 5 Open the optional roller exchange kit (

  • Panasonic KV-S7075C, Using Control Sheets 27 ∫ About Printing Control Sheets ≥ Print the control sheet at the specified size; do not enlarge or reduce the size. ≥ When printing the control sheet, make sure that the pattern is 25 mm (1 in.) from the top of the page and centered horizontally. ≥ Use the control sheet that is the same size as the document you are scanning. ≥ Be careful not to get the control sheet dirty. Do not fold or crease the control sheet. Scanning will not be performed properly. ≥ For details on control sheet and separation sheet, ref

  • Panasonic KV-S7075C, Panasonic Communications Company of North America Unit of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Panasonic Business Systems U.K. A Division of Panasonic U.K. Ltd. Willoughby Road, Bracknell, Berkshire, RG12 8FP Panasonic Marketing Europe GmbH Hagenauer Strasse 43, 65203 Wiesbaden, Germany For information of Compliance with EU relevant Regulatory Directives, Contact to Authorised Re

  • Panasonic KV-S7075C, Loading Documents on the ADF 22 7 Remove the document and lock the document guide. Slide the document guides selector in the direction shown in the illustration until the (1) and (2) marks are aligned to lock the document guide. 8 Place the document on the hopper again and adjust the document guide according to the size of the document to be scanned. ≥ Make sure to align the document pages along one side. ≥ Make sure that the center of the smallest sheet of the document will be fed to the center of the paper slot.

  • Panasonic KV-S7075C, Replacing Consumable Roller Modules 44 6 Install the new double feed prevention roller by matching the groove of its shaft with the groove of the metal holder. 7 Close the double feed prevention conveyor. 8 Close the ADF door. ≥ When you close the ADF door, close it securely until it is locked. 9 Clear the roller replacing counter with User Utility. ≥ Click [Clear Counter] button for [After Replace Roller] with User Utility. Groove

  • Panasonic KV-S7075C, Loading Documents on the ADF 17 4 Adjust the document guides slightly larger than the actual size of the documents. 5 When using long paper, pull out the hopper extension tray from the hopper. Then raise and adjust the exit stopper to the position a little longer than the actual length of the document. Document guide Hopper extension tray Hopper Exit stopper

  • Panasonic KV-S7075C, 9 Precautions ∫ Installation ≥ Do not place the unit in direct sunlight, in a cold draft, or near heating apparatus. ≥ Do not place the unit near apparatus which generate electronic or magnetic noise. ≥ Protect the unit from static electricity. ≥ Do not move the unit immediately from a cold place to a warm place. It may cause dew. ∫ CD-ROM ≥ Do not write or stick paper on the front and/or back of CD-ROM. ≥ Do not touch the data side of the CD-ROM. When handling the CD-ROM, be careful not to

  • Panasonic KV-S7075C, Changing the Reference Plate Setting 29 5 Close the exit door slowly until it clicks into place. ∫ Flatbed sheet setting 1 Turn off the scanner. 2 Fold the hopper tray in the direction of the arrow (1). 3 Open the document cover (2) and remove the flatbed sheet from the flatbed cover (3). ≥ The flatbed sheet is attached to the document cover with magnets. 4 Turn the flatbed sheet over, and then place it in the upper left corner of the flatbed glass. ≥ Set the flatbed sheet to the left. 5 Close the document cover. ≥ When you close the document cover, close it securely until it is locked. The flatbed sheet will b

  • Panasonic KV-S7075C, Cleaning the Unit 33 ∫ Cleaning the paper feed roller, separation roller, and double feed prevention roller 1 Turn the power off. 2 Push the ADF door release to open the ADF door. 3 Use the roller cleaning paper (KV- SS03) to remove the dirt from the surfaces of the paper feed roller and separation roller. Note: ≥ When wiping off the dirt on the roller surfaces, hold the rollers to prevent them from rotating, and wipe the roller all the way around them proceeding from one end to the other in the direction of the arrows shown in the figure. 4 Open the double feed prevention conveyor in the direction of

  • Panasonic KV-S7075C, 32 Cleaning the Unit ∫ Outside of the scanner ≥ Do not use thinner, benzine, or cleaners containing abrasives or surfactants, for cleaning the outside of scanner. ≥ Clean the unit at least once a month. 1 Turn the power off. 2 Clean the cover with a soft cloth. ≥ The ADF insertion and exit slots get dirty easily, therefore, proper cleaning is required. 3 Remove dirt and dust from the fan exhaust vent with a brush. ∫ Inside the scanner Clean the unit at least once a week or when 20,000 sheets have been scanned, whichever comes fi

  • Panasonic KV-S7075C, For Your Safety 7 Installation and Relocation Operating Safeguards Do not position the unit in a location where it is unstable. To prevent fire or shock hazard, do not expose this unit to rain or any type of moisture. Do not place the unit in a hot humid or dusty environment. Prolonged exposure to these adverse conditions may cause fire or electric shock. Do not block the air vents. Doing so can cause heat to build up, and may result in fire. When moving the unit, be sure to unplug the power cord from the AC outlet.

  • Panasonic KV-S7075C, These instructions contain information on operating the scanner. Before reading these instructions, please read the installation manual enclosed with this unit. Please carefully read these instructions and the enclosed installation manual. Keep all documentation in a safe place for future reference. Model No. KV-S7075C Operating Manual High Speed Color Scanner

  • Panasonic KV-S7075C, Component Identification 13 ∫ Power turn-on sequence 1 Turn on the power of the scanner. ≥ The power indicator (LED) will now light. ∫ About the power indicator (LED) The power indicator (LED) indicates the status of the scanner as follows: * 1 : The rollers need to be cleaned or replaced. Refer to Operating Instructions (CD-ROM) for the way of cleaning or replacing the rollers. * 1 , * 2 : Check the status of the scanner using the User Utility. The User Utility is included in the CD-ROM. Refer to "Installing Software" in the Installation Manual. LED light Status Green Ready to scan or scanning Green (flashing) Sleep mode Orange Ready to scan or scanning with caut

  • Panasonic KV-S7075C, 2 Introduction Thank you for purchasing a Panasonic High Speed Color Scanner. ∫ About the documentation The scanner documentation consists of 2 manuals: the Installation Manual and the Operating Manual. In addition, 3 software reference manuals are included. ∫ Abbreviations ≥ Windows ® refers to the Microsoft ® Windows ® operating system (hereafter Windows). ≥ Windows ® 2000 refers to the Microsoft ® Windows ® 2000 operating system (hereafter Windows 2000). ≥ Windows ® XP refers to the Microsoft ® Windows ® XP operating system (hereafter Windows XP). ≥ Windows Vista ® refers to the Microsoft ® Windows Vista ® operating system (hereafter Windows Vista

  • 48 Repacking Instructions It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or ship your scanner, please follow these instructions: ≥ Use the original carton and all of the original packing materials. ≥ Improper repacking of the scanner may result in a service charge to repair the unit. ≥ The scanner sh

  • Panasonic KV-S7075C, Troubleshooting 46 If you still experience problems after following these suggestions, please contact our Technical Support Department at 1-800-726-2797 for further assistance. (U.S.A. only) (ADF) Scanned image is aslant. The document guides are not adjusted to the size of the document to be scanned. The document to be scanned is set aslant on the hopper tray. Adjust the document guides properly to the size of the document to be scanned. Right and left sides of the document to be scanned are not the same in height, because of curl and fold. Remove curl and fold then reduce the amount of the document. (ADF) The scanned document is blank. The document to be scanned

  • Panasonic KV-S7075C, 47 Shading Adjustment ¥What is the purpose of the shading adjustment? The shading adjustment function corrects variations in the lamp intensity and pixel sensor sensitivity, and reduces unevenness in density in scanned images. It can be carried out by means of the User Utility using the special shading paper, which is provided with this scanner. ¥When shading adjustment is required Proceed with the compensation when the colors in some parts of the scanned images differ in the extreme, or when the image quality fails to be improved even after the inside the scanner is cleaned. ¥Before proceeding with the shading adjustment Before proceeding, be absolutely sure to thoroug

  • Panasonic KV-S7075C, Loading Documents on the ADF 16 ∫ Scanning documents with pages of same sizes Cautions: ≥ Please remove any staples from the document before scanning. ≥ Glued or curled documents may cause a paper jam or damage the unit, so please scan using the flatbed. 1 Set the manual feed selector to [AUTO] or [MANUAL]. [AUTO]: Auto feeding [MANUAL]: Manual feeding ≥ When manually feeding a document, feed the document 1 page at a time. ≥ When scanning important documents or bound documents, feed them manually. 2 Documents that have been stapled together or stacked together (as

  • Loading Documents on the ADF 20 ∫ Scanning documents with pages of different sizes For conditions when scanning documents with mixed page sizes, see "For documents with mixed page sizes and thicknesses" (page 15). ≥ When scanning different size documents, scanned sheets may need to be reordered for optimum performance. 1 Set the manual feed selector to [AUTO]. 2 Documents tha

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Smeg SC061X-8 Manual  smeg/sc061x-8-Y33.pdf 04 Jan 2023 46 3.18 Mb
2 Norcold MRFT615C Parts list norcold/mrft615c-W62.pdf 08 Jan 2024 7
3 Philips SDV7400K/17 Instructions philips/sdv7400k17-3FW.pdf 03 Mar 2023 2
4 DANA 4360-13 Parts list dana/4360-13-VC5.pdf 19 Mar 2024 2 0.14 Mb
5 Kenmore ELITE 796.8051 Use and care manual kenmore/elite-796-8051-115.pdf 16 Aug 2023 68
6 Frigidaire CFEF210CS7 Control Control manual frigidaire/cfef210cs7-control-5PA.pdf 11 Nov 2022 12 1.25 Mb

Similar Resources:

  • Avision

    FB6000E

    (42 pages)
    i Avision FB6000E Color Image Scanner User’s Manual  Installing the Scanner  Installing the Software  Editing Your Image  Maintenance  Troubleshooting …
  • Epson

    ActionLaser 1000

    (11 pages)
    ActionLaser 1000/1500Printer SpecificationsPrintingPrinting method:Resolution:Printing speed:First print:Warm-up time:Internalemulations:IC card slots:Cartridge slot:Resident fonts:External fonts:Laser beam scanning and dryelectrophotographic process300 x 300 dpiUp to 6 pages per minute (letter or A4)(depending on the font and quantity ofdata)Less than 20 se …
  • Fujitsu

    fi-565PR

    (128 pages)
    ffii--556655PPRR IImmpprriinntteerr Operator’s Guide Guide de l’utilisateur Bedienungshandbuch Guida dell’operatore Guía del Usuario オペレータガイド P3PC-E977-01XA …
  • Fiery

    X3eTY2 65C-KM

    (8 pages)
    Part Number: 4507181625 February 2008Copyright © 2008 Electronics for Imaging, Inc.If you are installing system software version 1.0a on the Fiery X3eTY2, this addendum replaces the section “Installing system software over the network port” in the Fiery X3eTY2 Service Guide. Be sure to use the procedure described in this addendum, and disregard the corr …
  • SICK

    S3000 Expert

    (12 pages)
    Close safety gaps with 64 elds: Checkmate!                  …
  • Konica Minolta

    bizhub 160

    (116 pages)
    SERVICE MANUAL2005.042005.04Ver. 1.0Ver. 1.02005.04 Ver.1.02005.04 Ver.1.0© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.Printed in JapanPrinted in JapanDD4980CE1-1000 DD4980CE1-1000 Use of this manual should be strictly supervised toavoid disclosure of confidential information.Use of this manu …

Comments, Questions and Opinions: