Manualios.com

Panasonic WVNW474S - COLOR CCTV CAMERA Operating Instructions Manual

  • WVNW474S - COLOR CCTV CAMERA Security System
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 58

Panasonic WVNW474S - COLOR CCTV CAMERA Manual Online:

3.4, 862 votes
Panasonic WVNW474S - COLOR CCTV CAMERA User Manual
Panasonic WVNW474S - COLOR CCTV CAMERA User Guide
Panasonic WVNW474S - COLOR CCTV CAMERA Online Manual

Text of Panasonic WVNW474S - COLOR CCTV CAMERA User Guide:

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -51- ■ Reviewing Alarm Pictures The alarm pictures stored in the camera can be reviewed on the PC. 1. In the main window, click the [Alarm List] button. Causes of events are abbreviated in the Type col- umn. TRM: Caused by the input supplied via the Alarm-In connector. VMD: Caused by the built-in VMD. Picture file statuses are indicated following the Type column. 1: One picture file stored : More than one file stored 3. The selected picture is displayed, and the alarm image control panel appears at the bottom of the screen. The title of the control panel is followed

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -20- 5. Click the [Enable] button when using DHCP and DNS. When using the DNS functions, enter the "Primary DNS Server address" and the "Secondary DNS Server address". 6. Click [AUTO] when the DNS server gets primary and secondary IP addresses from the DHCP server. Notes: • If DHCP is enabled although there is no DHCP server in the network, check "Disable" for DHCP in the "Panasonic IP Setup" window. • If DHCP is enabled, and the DHCP server has not assigned an IP address yet, "0.0.0.0" is dis- played for the IP address. The IP address of the camera will be displayed after the

  • -7- 1. This product should be installed and connected in conformity with NEC by qualified service per- sonnel or system installers. 2. Use a class 2 power source supplying 24 V AC. 3. To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera. 4. Be sure to use a ceiling board/wall having enough str

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -37- ■ Alarm Setup 1. Open the Alarm Setup window. 2. External Alarm • Select ON or OFF for External Terminal Input, and click the [SET] button. ON: Receives alarm inputs via the ALARM IN termi- nal. OFF: Ignores alarm inputs via the ALARM IN termi- nal. Note: See SPECIFICATIONS for alarm input condi- tions. 3. E-mail Notice Setup Note: Sending E-mails will not be possible in an environment where POP (Post Office Protocol) authentication is required. E-mail Notice: ON: Sends an E-mail when an alarm arises. OFF: Does not send. The defa

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -31- 6. Synchronization Setting (SYNC) There are three synchronization modes: INT (internal), LL (line-lock), and VD2 (vertical drive). You can select the internal or line lock mode in the menu setup, but you cannot select VD2. The VD2 signal is supplied from an external device e.g., a Video Multiplexer, by being multiplexed on a coaxial cable, and it overrides the internal and line-lock mode even when these modes are selected in the menu. Note: The priority for sync sources is: VD2 (highest) – LL – INT (lowest). 1. Move the cursor to SYNC and select a mode. INT: Synchronizes the camera to the internal gener- ator. LL: Synchronizes to 24 V AC. The default setting is INT. 2. When LL i

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -57- ■ Optional Heater Unit WV-CW3H ● Introduction Installing this heater unit enables the camera to operate under in a low-temperature environment of –30 °C (–22 °F). The heater turns on automatically when the temperature inside the camera drops below +10 °C (50 °F) and turns off when it rises. A small fan inside the unit will minimize condensation on the surface of the dome cover caused by changes in ambi- ent temperature unless temperatures change too rapidly. The fan will stop when there is no possibility of condensa- tion. ● Precautions • This product should be installed and connected by qualified s

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -52- ■ Resetting Alarm You can reset the alarm output functions being activat- ed. 1. In the main window, click the [Setup Menu] button. 2. Click the [Alarm] button to open the Alarm Setup window. 3. Scroll down the screen. 4. Click the [Alarm Reset] button. 5. Click the [Go to Main Menu] button to go back to the main window.

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -27- ■ Setup Menu Tree ** SET UP ** ** CAM SET UP ** ALC CAMERA ID ↵ AGC SHUTTER SYNC SENSE UP MOTION DET WHITE BAL CAMERA ID ** ALC CONT ** MASK SET ↵ ** AWC ** ** MOTION DETECT ** CHROMA GAIN UPSIDE DOWN ** SPECIAL ** PEDESTAL AP SHARP EL-ZOOM HUE BURST(B/W) BW CAMERA RESET MENU/DIP SW NET MASK IP ADDRESS ** NETWORK SETUP ** HTTP PORT # DHCP GATEWAY

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -21- 6. Click the [Network] button. The "Network Setup" window appears. 7. Enter parameters for each item in the columns. Refer to Network Setup Parameters vs. Connection Type. Notes: • After clicking the SET & REBOOT button, the browser software stops refreshing images and displays a dialog box prompting you to restart. • Wait for around 10 seconds until rebooting is complete.

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -2- WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclo- sure that may be of sufficient magni- tude to constitute a risk of electric shock to persons. The exclam

  • Panasonic WVNW474S - COLOR CCTV CAMERA, ● Power Connection Use individual power sources for the camera and optional heater unit. • Wire colors & functions -12- ■ Connections Cautions: • This product should be installed and connected in conformity with NEC by qualified service personnel or system installers. • Do not use a transformer with a capacity of more than 20 V A. • Use a class 2 power supply. • To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for 24 V AC connections. • Be sure to connect the GND (grounding) lead of the camera and grounding terminal of the power supply. Black (Live) Blue (Neutral) Green/Yellow (GND) Brown (Live) For optional heat

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -22- ■ Network Setup Parameters vs. Connection Type Connection type Item Parameter description Connection type 1 IP address Enter "192.168.0.XXX" (where XXX should be a number from 2 to 254 except the same IP addresses already assigned to the PC or any other cameras). Net mask Use the default setting "255.255.255.0" for the subnet mask. Default gateway 192.168.0.1 Host name NW_Camera Network speed Select the network speed by pressing the [o] button. Selectable parameters: Auto (default setting), 100 Mbps (full duplex), 100 Mbps (half

  • -29- To edit the CAMERA ID 1. Move the cursor to CAMERA ID. The factory default setting is OFF. 2. Press [SET]. The CAMERA ID menu appears. The cursor on the letter “0” is highlighted. 3. Move the cursor to the character you want to edit by pressing [Left]/[Right]/[Up]/[Down]. 4. After selecting the character, press [SET]. The selected character appears

  • Panasonic WVNW474S - COLOR CCTV CAMERA, ● Connection to Internet (Type 3) The PC accesses the camera through the Internet and the DSL/CATV modem. Necessaries: • Straight-type network cable (Category 5) • CATV modem (cable modem) or DSL modem ● Connection to Internet (Type 4) A switching hub or a router may be added to type 3 connection. Necessaries: • Straight-type network cable (Category 5) • CATV modem (cable modem) or DSL modem • Switching hub or router (10BASE-T/100BASE-TX applicable) Notes: • Setting the router is required when connecting more than one camera. Refer to the manual included with the router. • The camera does not support the PPPoE. Use a router that handl

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -19- 7. Click the "Use the following IP address" radio button and enter the IP address and the subnet mask as follows. IP address : 192.168.0.9 Subnet mask : 255.255.255.0 8. Click the [OK] button, and the window dialog box closes. Note: Use a small sized picture when a blue picture appears instead of the live picture due to Internet traffic congestion. ■ Network Setup of the Camera ● Using Panasonic IP Setup Software Set up the network of the camera using the "Panasonic IP Setup" software included on the CD-ROM provided with the camera. Not

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -49- • A mail can be sent to a maximum of four addresses, with or without attached picture file. A mail contains: the camera name, time & date of occurrence, cause of event, and the reference addresses to the stored pictures as follows. The number of stored alarm pictures: e.g., 472 URL of the picture: http//(Camera IP address)/ ALMxxxx_00.jpg Notes: •“xxxx” stands for the event number, and “00” for the picture number. • A picture numbered “00” will be automatically attached to the mail. • Enter “39” instead of “00” in the address bar if you wish to vie

  • -5- Features • 10/100BASE-T terminal enabling you to view camera images via the network • User/Host authentication • SD-II (Super Dynamic) expands the dynamic range up to 46 dB without interference between dark and bright portions in a scene. • High adaptability to environmental changes Auto light control (ALC) B/W and color switching (AUTO, EXT) Electric sensit

  • -24- Connection type Item Parameter description Host name Contact your Internet service provider and enter the assigned host name if required. Network speed Select the network speed by pressing the [o] button. Selectable parameters: Auto (default setting), 100 Mbps (full duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps (half duplex) Using Auto

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -56- Control Function: Auxiliary Out: Collector-output, OFF (Open or 4 V DC – 5 V DC)/ ON ( ≤ 1 V 50 mA) Day/Night In: Pulled-up to 5 V DC, OFF (Open) / ON (0 V 0.2 mA) General Power Source 24 V AC 60 Hz Power Consumption: 8.6 W (Camera) 12.1 W (Optional heater unit) Ambient Operating Temperature: –10 °C - +50 °C (14 °F - 122 °F) –30 °C - +50 °C (–22 °F – 122 °F) (when optional heater unit built in) Ambient Operating Humidity: Less than 90 % Dimensions: 152.5 mm (H) x 175 mm (D) [6" (H) x

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -54- TROUBLESHOOTING Symptom No picture is displayed. HTML documents are not displayed. • Is the AC adapter firmly plugged in to the outlet? • Are the POWER IN terminals on the camera connected with the AC adapter properly? • Is the video cable or network cable connected properly? • HTML files in the camera might be broken. Initializing is required. 12 42 Cannot access the camera from the browser. • Are the network cables connected properly? • Is the status indicator lamp of the network connection termi- nal on? If not, a network connection has not been established or the other devices are not in operation. • Is a valid IP address set for the camera? • Are you connecting t

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -26- 4. Click the Menu ON button to overlay the ** SET UP ** menu on the camera image. The cursor is highlighted on the window. 5. Move the cursor to SETUP DISABLE if it is dis- played, or skip to step 7 if ENABLE is displayed. 6. Click the SET button. DISABLE will change to ENABLE, and the camera is now ready to be set up. Note: While DISABLE is displayed, setup operations are disabled. 7. Move the cursor to CAMERA O, and click the SET button. CAM SETUP opens. Notes: • Refer to the next page for setup operations. • Return the menu

  • Panasonic WVNW474S - COLOR CCTV CAMERA, -35- ■ Network Setup (NETWORK SETUP) Set up network parameters when connecting the 10/100BASE jack with a network. Notes: • Access the setup menu from the PC to use the DHCP or DNS server, because these settings are not included in this window. • Ask your system administrator or ISP (Internet Service Provider) about available IP address, subnet mask, and gateway, prior to setup. • The assigned address should be a global type when connecting via the Internet. Ask your ISP whether it is. 1. Move the cursor to NETWORK SETUP in the SETUP menu window and press [SET]. The NETWORK SETUP menu opens. The factory default settings are

  • An example of flush mounting is shown. This example shows two boxes: one is for camera mounting and the other is for cable junction. 1. Procurement • Four screws Locally procure four bracket fixing screws suitable for the installation surface and structure of the wall/ceiling or junction box. • Junction box When planning to use a junction box(s), procure one locally that meets the di

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Epiphone Galaxie 10 Operation manual epiphone/galaxie-10-R8W.pdf 23 May 2023 2 0.09 Mb
2 Femi NG 120 Instruction manual femi/ng-120-8L9.pdf 07 May 2023 8
3 Sony XS-F6922 Service manual sony/xs-f6922-S4M.pdf 17 Jul 2022 2 0.25 Mb
4 M2TECH EVO SUPPLY Operation & user’s manual m2tech/evo-supply-A89.pdf 29 Oct 2022 10
5 Taylor 632 Operator's manual taylor/632-U6B.pdf 29 Jul 2022 48
6 GE GNUT05Z Installation instructions manual ge/gnut05z-678.pdf 22 Jun 2023 9 0.25 Mb

Similar Resources:

  • Panasonic

    BB-HCM403A

    (2 pages)
    Installation Guide(For Professional Installers)Network CameraModel No. BB-HCM403A(PoE Ready)•Installation ProceduresAfter preparing the Ethernet cable that has enough length, mount the camera.•The camera can be viewed in the least light requirement at 3 lx (default). Use supplemental lighting for the dimly lit places. The camera can be viewed in the leas …
  • WERMA Signaltechnik

    729

    (32 pages)
    SIGNALTECHNIKEx-Signalleuchte 729 / 785Ex-Signal Beacon 729 / 785Ex-Lampe témoin 729 / 785BetriebsanleitungInstructions for useMode d’emploisilikonfrei, silicone free, sans silicone310_729_001_1111.fm Seite 1 Freitag, 2. Dezember 2011 11:58 11 …
  • M-system

    AS4CT

    (4 pages)
    AS4CTP. 1 / 4EM-1603 Rev.65-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPANPhone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected] ALARM(dual or quad alarm trip; eld-congurable)MODELAS4CTINSTRUCTION MANUALBEFORE USE ....Thank you for choosing M-System. Before use, please check contents of the package you received as outli …
  • AXA

    Remote 2.0

    (4 pages)
    AXA Remote 2.0InformationYou have just acquired a high quality AXA product.The instructions below must be followed closely in order to effectively assemble and operate this product.Implementation: Top and side-hung windows, opening outwardsAssembly tools (recommended):Tape measure, (cordless) drill, screwdriver, Ø 2 mm drill bit, pencil or stiletto, screw r …
  • ELRO

    AS80SR11B

    (5 pages)
    1 Strobe light & red LED Control Box – hidden under water proof cover (below) e Control box cover r AS80SR11B Solar Siren Installation Instructions General Introduction The AS80SR11B is an outdoor siren powered by solar energy and rechargeable battery. By its visible presence, the external siren indicates that an alarm system is installed and deters …
  • alerta

    ALJ-97-7351-01

    (2 pages)
    Product InformationEnglishCompany Contact InformationAlerta Family, Inc.134 N Battlefield BlvdChesapeake VA 23320www.alertafamily.comCall Button Alarm SystemDisclaimerAlerta Beck & Call is not a medical device, and isnot intended to diagnose, treat, cure, or preventany disease. It does not track or locate a subject. Itis designed to assist in monitoring …

Comments, Questions and Opinions: