Panasonic IMAGE STUDIO Ver.3.0.0 Operation Manual
|
Panasonic IMAGE STUDIO Ver.3.0.0, 45 Effects You can modify the loaded image by adding effects such as contrast and brightness. Contrast Adjusts the contrast. Sharpen Adjusts the strength/weakness of the outline. Reverse Inverts negative and positive. Does not need to be adjusted with the slider. Brightness Adjusts the brightness. Denoise Makes the noise unnoticeable. Optimize Makes the image clearer through automatic adjustments. Does not need to be adjusted with the slider. Check [Effect]. Select the types of effects. Make adjustments with the slider. Types of effects Se
33 Edit the graphic pattern. 5 To insert a copied frame into a different position: Select the frame to be inserted. Click [Copy]. Select the insert destination frame. Click [Paste]. The copied frame will be inserted. Note: You cannot add frames, when the number of total frames exceeds the designated number. (page 7) Adjust the n
Panasonic IMAGE STUDIO Ver.3.0.0, 2 IMPORTANT: Carefully read this End-User License Agreement (“Agreement”) before installing or using the “IMAGE STUDIO” (“Software”) on an end user’s PC. If and when the user installs and uses the Software on his/her PC, he/she shall be considered to have agreed upon all the terms and conditions of the present Agreement. If he/she does not agree upon the present Agreement, he/she should not use the Software. End-User License Agreement of “IMAGE STUDIO” (1) Copyright The user acknowledges that all copyrights and other intellectual rights on the Software are owned by Panasonic Co., Ltd. (“Company”) or its licensor. The Softwar
Panasonic IMAGE STUDIO Ver.3.0.0, 26 Editing a Graphic Pattern (Wipe Display) From a Still Image File You can edit images so that the display is overwritten from top, bottom, left or right. Target files: BMP, JPG, JPEG, PNG and GIF Select an image file for the foreground and click [Open]. Open the selected file. Check that the file type is BMP, JPG, JPEG, PNG or GIF. The file open dialog will be displayed twice (the former for foreground and the latter for background) successively when [Wipe Movie] is clicked. 4 (continued on the next page) Click
Panasonic IMAGE STUDIO Ver.3.0.0, 18 Context Menu Right-clicking the mouse, a useful context menu is displayed. When main screen is displayed Scroll display Graphic patterns except for scroll display and still image When Edit Movie screen is displayed (page 32) Moves the start frame up when it is below the end frame. Moves the end frame up when it is below the start frame. Resets the start frame size to the default. Resets the end frame size to the default. Resets the start frame to the upper left of the screen (default position). Resets the end frame to the lower right of the screen (default position). Sets the aspect ratio for the start frame to the defaul
Panasonic IMAGE STUDIO Ver.3.0.0, 32 Cut [CTRL+X] Cuts the selected frame. Copy [CTRL+C] Copies the selected frame. Paste [CTRL+V] Pastes the object in the cut or copied frame. (As to the positioning, it will be pasted in front of the selected frame.) Undo [CTRL+Z] Cancels the immediately preceding action and resets to the condition immediately prior to that. Delete Deletes the selected frame. Open Opens another moving image file for editing. (Reference file) Copy [CTRL+C] Copies the selected frame. Click [Edit]. The Edit Movie screen will be opened. The image on the screen shown on the left cannot be edited. 4
30 6 Process the image with dithering or effects. (pages 41 to 45) Caution: You cannot add dithering or effects to files in pfs, pfm, pfo or pfe format that has been previously saved. 8 Enter a file name and click [Save]. The file will be saved. A file extension (pfo) will be added to the opening image file name. A file extension (pfe) will be added to the ending
16 Pull-Down Menus Items relating to file handling Items relating to image editing Goes to the Pre-dialog. Saves a file. Exits from the application. Configures the dithering settings. Adds effects to the image. Enters text to a still image. Resets the start frame size to the default. Resets the end frame size to the default. Resets the start frame to the upper left of the screen
Panasonic IMAGE STUDIO Ver.3.0.0, 39 Cancels the input text and closes the screen. Inserting Text Into a Still Image Note: Moving text You cannot move text to a position at which the upper left of the input text would extend beyond the edge of the screen. Text fonts Only 1 font can be used at a time. Text in a file in which text has been entered and saved cannot be re-edited. Text can still be edited any number of times after it has been entered, until the file is saved. Click [Type tool]. The Input Text screen will be displayed. Preview screen The edited still image and input text are displayed. Enters text here. Text col
Panasonic IMAGE STUDIO Ver.3.0.0, 34 To insert a cut frame into a different position: Select the frame to be inserted. Click [Cut]. The selected frame will be cut. Select the insert destination frame. Click [Paste]. The cut frame will be inserted. 5-2 Note: You cannot add frames, when the number of total frames exceeds the designated number. (page 7) Adjust the number of frames so that the opening is 30 (60 for 2004 models) frames and the closing is 20 (40 for 2004 models) frames. Excess and deficiency in the number of frames cause fa
Panasonic IMAGE STUDIO Ver.3.0.0, 13 Check [Remove] and click [Next]. 7 Click [Yes]. 8 Select [start] [Settings] [Control Panel]. 1 Select [Add/Remove Programs]. 2 From [Install/Remove], select [Panasonic IMAGE STUDIO] and remove it. 3 For Windows Me/Windows 2000 Click [Finish]. The program has been uninstalled. 9 Never check these boxes.
Panasonic IMAGE STUDIO Ver.3.0.0, 4 Table of Contents Introduction ..............................................................................................................5 What is IMAGE STUDIO? ....................................................................................................... 5 Operation Flow .................................................................................................................. 5 Differences among the software programs for each car audio unit .....................................................
Panasonic IMAGE STUDIO Ver.3.0.0, 29 Edit a moving image. The procedure is the same as for creating graphic patterns including display scrolling and display wiping. (pages 21 to 28) To create a wiped display, click [Create opening message] or [Create closing message] to open the file to be used for both the foreground and background. The file open dialog will be displayed twice (the former for foreground and the latter for background) successively when [Wipe Movie] is clicked. 5 Editing Opening and Closing Messages Select the file to be edited and click [Open]. Open t
Panasonic IMAGE STUDIO Ver.3.0.0, 31 Editing the Created Graphic Pattern You can edit moving images that have been created to add, delete or reorder frames. In addition, you can add frames by copying them from other moving image files. Click [New] from the [File] pull-down menu. 1 Click [Edit movie] from the pre-dialog menu. 2 Select the graphic pattern file to be edited and click [Open]. Open the selected file. 3 (continued on the next page)
10 Installing IMAGE STUDIO When the previous version of IMAGE STUDIO has been installed on your PC, remove it before installation of IMAGE STUDIO version 3.0.0. (page 12) 1 Visit the IMAGE STUDIO download site on the Panasonic web site. http://panasonic.co.jp/pas/en/software/customize/index.html 2 Follow the instructions on the site to download IMAGE STUDIO. Please check the opera
Panasonic IMAGE STUDIO Ver.3.0.0, 14 Running IMAGE STUDIO Select [start] [Programs] [Panasonic] [Panasonic IMAGE STUDIO]. Panasonic IMAGE STUDIO will start up. For Windows Me/Windows 2000 Click [start]. 1 For Windows XP (The display is different in Windows Me or Windows 2000.) Select [All Programs] [Panasonic] [Panasonic IMAGE STUDIO]. Panasonic IMAGE STUDIO will start up. 2 Top screen of IMAGE STUDIOPre-dialog menu
Panasonic IMAGE STUDIO Ver.3.0.0, 7 Differences among the software programs for each car audio unit There are 5 installing types for IMAGE STUDIOs varied with your audio unit. Please confirm your audio unit model prior to the installation.* All figures of this application throughout this manual represent installing type CQ-C8803U unless otherwise specified. Differences among these 5 installing types are as follows: Note: *However, you can also change the installing type after installation. (page 20) Differences among 5 installing types Model (Install type) Display size and colors Max. frame No. of Moving picture Max. frame No. of Opening picture Max. frame No. of Closing picture CQ-C8803
Panasonic IMAGE STUDIO Ver.3.0.0, 42 Dithering 1 The effect varies depending on images to which dithering is applied. Select your favorite dithering after trying Ditherings 1 - 3. Dithering 2 Dithering 3 Monochrome Converts to the uncolored images. Sepia Converts to the sepia color images. Note: Sixty-four (64)-color moving images are not supported. Dithering patterns (for Color) Dithering 1 The effect varies depending on images to which dithering is applied. Select your favorite dithering after trying Ditherings 1 - 3. Dithering 2 Dithering 3 Halftone A continuous tone like those seen in photogr
Please read these instructions carefully before using this product and save this manual for future use. This version of IMAGE STUDIO is available in English only. Software Operation Manual IMAGE STUDIO Ver.3.0.0
Panasonic IMAGE STUDIO Ver.3.0.0, 19 Pre-dialog Menu Pre-dialog shown below will be displayed when the application starts or [NEW] is selected from the pull-down menu. Pre-dialog 1 Goes to the pre-dialog 2. (page 38) Goes to the pre-dialog 2. Goes to the pre-dialog 2. (page 31) Closes the pre-dialog. Sample images of each mode will be displayed. Pre-dialog 2 (page 21) (page 24) (page 26) The file open dialog will be displayed twice (the former for foreground and the latter for background) successively when clicking this. Clo
Panasonic IMAGE STUDIO Ver.3.0.0, 24 Editing a Graphic Pattern (Scroll Display) From a Still Image File You can edit a moving image to scroll between any 2 locations of a still image file. Target files: BMP, JPG, JPEG, PNG and GIF Select the file to be edited and click [Open]. Open the selected file. Check that the file type is BMP, JPG, JPEG, PNG or GIF. 4 Click [New] from the [File] pull-down menu. 1 Click [Create graphic pattern] from the pre-dialog menu. 2 (continued on the next page) Click [Scroll Movie]. 3
Panasonic IMAGE STUDIO Ver.3.0.0, 40 (Example: 512-color images) 7 Click [Save as] from the [File] pull-down menu. 6 Enter a file name and click [Save]. The file will be saved. A file extension (pfs) will be added to the file name. Do not add any file extension other than “pfs” to the file name. If you delete or change the file extension, the images will not be displayed properly by the Panasonic car audio unit. Text color Color palette selection Background color Color palette selection Transparent (default) No
Panasonic IMAGE STUDIO Ver.3.0.0, 37 Click [Preview] and check the edited moving image. The Movie Preview screen will be opened. 6 : Pause : Play : Stop : Repeat : Closes the Movie Preview screen. Close Click [OK]. Confirm the edits made and close the Edit Movie screen. 7 Enter a file name and click [Save]. The file will be saved. A file extension (pfm) will be added to the file name. A file extension (pfo) will be added to the opening image file name. A file extension (pfe) will be added to the ending image file name. �
Panasonic WJND300 - NETWORK DISC RECORDR Software Setup instructions
WJND300 - NETWORK DISC RECORDR |
Panasonic VIERA TH-EBP50F9 Software Operating instructions
VIERA TH-EBP50F9 |
Panasonic PT-D10000 Software Setup and operation manual
PT-D10000 |
Panasonic PT-D10000 Software Adjustment manual
PT-D10000 |
Panasonic PT-D4000U - XGA DLP Projector Software Brochure & specs
PT-D4000U - XGA DLP Projector |
Panasonic DP-2310 Software Operating instructions manual
DP-2310 |
Panasonic DP-2310 Software Operating instructions manual
DP-2310 |
Panasonic FW100NTE Software Manual
FW100NTE |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Brookstone | iConvert® | Operation & user’s manual | brookstone/iconvert-r-L67.pdf | 18 Nov 2023 | 20 | 0.49 Mb |
2 | Thane Fitness | Total FLEX | Operation & user’s manual | thane-fitness/total-flex-TC3.pdf | 25 Oct 2023 | 13 | |
3 | ASROCK | 4CORE1600-D800 - V1.0 | Operation & user’s manual | asrock/4core1600-d800-v1-0-D46.pdf | 27 Dec 2023 | 43 | 1.06 Mb |
4 | Kenwood | TK-7100 | Instruction manual | kenwood/tk-7100-6Q1.pdf | 24 Jul 2022 | 24 | |
5 | Motorola | Talkabout MHP71 | Operation & user’s manual | motorola/talkabout-mhp71-M73.pdf | 07 Jan 2023 | 2 | |
6 | Elation | PLATINUM PROFILE LED | Operation & user’s manual | elation/platinum-profile-led-377.pdf | 30 Dec 2022 | 41 |
Nortel
Magellan Vector 2.0 Release Notes, Issue 1.9.1Magellan Vector 2.0 Maintenance ReleaseRelease NotesSoftware Release Date: June 15 1998Issue: 1.9.1© 1998 Northern TelecomAll rights reserved*Magellan is a trademark of Northern TelecomPrinted in Canada
…
V2(42 pages) |
Bosch
Register yournew device onMyBosch now andget free benefits:bosch-home.com/welcomeVitaPower Serie | 2MMB211...[en]User manualMini blender6[ms]Manual penggunaPengadun mudah alih10[zh] 15[zh-tw] 18[ar] 21
…
2(28 pages) |
Epson
Please open this booklet and record your unique Unit ID Number.You will need it to take full advantage of the Preferred Warranty.CPD-22927R1EPSON PreferredLimited Warranty Program for the Epson Stylus® Pro 3800SM®Priority Technical SupportToll-Free Phone NumberSecurity and Peace of MindCPD22927R1_Orph_PW.indd 1 1/18/07 9:12:05 AM
…
3800 - Stylus Pro Color Inkjet Printer(12 pages) |
Kyocera
Operation GuideBedienungsanleitungManuel d’utilisationGuida operativaGuía de instruccionesPaper FeederPapierzuführungChargeur de papierAlimentatore cartaAlimentador de papelDuplexerDuplexeinheitUnité de duplexageUnità duplexDuplexorSorterSortiererTrieuseFascicolatoreClasificadorPFDUSO60_E.book 1 ページ 2003年10月17日 金曜日 …
FS-1920(30 pages) |
Kyocera
FS-3900DNA4 MONOCHROME WORKGROUP PRINTER• 35 pages per minute with true 1,200 dpi• 64 MB memory standard, upgradeable to 576 MB• PDF direct printing from USB Flash Memory devices• Eco-friendly, ozone-free technology• Long-life components and easy maintenanceReady to go in any demanding environ-ment, this new generation A4 workgroupprinter provides …
FS-3900DN - B/W Laser Printer(2 pages) |
HP
HP recommends Windows Vista®Business 1.Monitor (sold separately)7.1 PCI slot, 3 PCI-X slots, 1 PCIe x8 (4x electrically), 1 PCIe 16 (4xelectrically)2.Standard Keyboard (USB or PS/2)8.1 PCI Express x16 Graphics Bus3.Mouse (USB or PS/2)9.Dual-Core or Quad-Core Intel® Xeon® Processors4.Front IO: 2 USB 2.0, 1 IEEE-1394a (standard), headphone andmicrophone10 …
XW8400(82 pages) |
Creative Other ZEN X-Fi3Quick start manual for Creative ZEN X-Fi3 Other ZEN X-Fi3, 2 |
Weslo Other Cadence 900 TreadmillCadence 900 Treadmill Manual - A61EGA Cadence 900 Treadmill, 24 |
Samsung Cell Phone Galaxy mini GT-S5570Cell Phone PDF Service manual Galaxy mini GT-S5570, 100 |
Nortel Handsets 6120PDF Manual (@6I981N), Nortel 6120 Handsets (25th Dec 2023) 6120, 2 |
Samsung TV PN42A410Samsung TV PN42A410 Operation & user’s manual PN42A410, 139 |
T+A DVD Player SADV 1250 R HDDVD Player #J222HS SADV 1250 R HD, 42 |
Fimap Scrubber Genie BFimap Product Manual: Genie B PDF Use and maintenance manual - B25E16 Genie B, 23 |
Bentel Security Cell Phone BGSM-G#6RNCP4 BGSM-G: Bentel Security Cell Phone Owner Documentation BGSM-G, 32 |
BREIL Other FS20#Q8FI2V: FS20 Other Instruction book FS20, 64 |
Heli-Max Toy AXE100CPUser Guide: Heli-Max AXE100CP (85P83C, Upd.15.01.2024) AXE100CP, 24 |
Xezo Watch Architect ETA 2000-1Manual: Xezo Architect ETA 2000-1 (NQV4HK, Upd.Sunday 31-12-2023) Architect ETA 2000-1, 2 |
Miele Food Warmer EGW 602-14Food Warmer Operating and installation instructions (Miele EGW 602-14) EGW 602-14, 20 |