Haier LT32M1CA Instruction Manual

Text of Haier LT32M1CA User Guide:

• WARNING • Misuse or modification of this appliance may result in breakdown or injury. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. IMPORTANT INFORMATION • The appliance is intended for household use only. • The appliance should always be turned to OFF before plugging or unplugging from socket. Never yank cord to disconnect f

• Haier LT32M1CA, 32 KNOW YOUR MACHINE Know Your Machine .........................................................................................3 Remote Control ................................................................................................ 6 Wall Mounting....................................................................................................8 Antenna Connection .........................................................................................10 Tuning Menu Options ........................

• Haier LT32M1CA, 54 KNOW YOUR MACHINEKNOW YOUR MACHINEKNOW YOUR MACHINE B D F G H J M N O P C E Power LED Wall Mount Hole Volume Up Volume Down Channel Up Channel Down MENU Button Source Button Power Button Common Interface Slot Headphone Output Audio Input Video Input S-Video Input Antenna Input SCART Input PC Audio Input SPDIF Output AV L/R Audio Output Component Input HDMI Input Power Connector VGA Input K L Q R S T 1 x AC Power Cord Z 2 x AAA Battery a 1 x LCD TV Front View Side Connections Rear View Control Pane

• Haier LT32M1CA, 6 7 3. Carefully close the Battery Cover. See fig. 3. 2. Insert two new 1.5V size AAA Batteries with the and marks correctly aligned. See fig. 2. NOTE ON BATTERIES: • Do not mix different types of batteries or an old battery with a new one. • To prevent the risk of leakage or explosions, never recharge the batteries, apply heat or take them apart. • When not using batteries, remove them to prevent battery drain. • If liquid leaks from the batteries, throw them away. Thoroughly clean the battery compartment with a dry cloth. REMOTE CONTROLREMOTE CONTROL 1. Unclip the Battery Co

• Haier LT32M1CA, IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs supplied are suitable for supporting the unit. Consult a qualified tradesperson if you are not sure. NOTE: It would be useful to ask someone to help you at this stage. 4. For the Wall Bracket - Refer to the user instructions supplied with the wall bracket (not included). See fig. 8. 3. Use 4 Wall Mount Holes B and Screws (not included) to mount the TV on the Bracket (not included). See fig. 7.

• NOTE: Make sure your local voltage is 230V/240V~, 50Hz. Z Mains Socket 1. Connect the AC Power Cord Z to the Power Connector X. See fig. 9. 2. Connect the AC Power Cord Z to the mains socket. See fig. 9. 10 11 TUNING MENU OPTIONSANTENNA CONNECTION P 1. Connect the Antenna Plug to the Antenna Input P located at the rear of the TV. See fig. 9. 2. For optim

• Haier LT32M1CA, 4. Use Up or Down Cursor Y to select your country. Then press Green Button a to continue or press Yellow b to go back. See fig. 13 and 15. 5. System searching may take few minutes to complete. See fig. 16. 6. A message will be displayed when the search is complete. Press the Red Button e to finish system searching. The LCD TV will automatically display the first channel found automatically. See fig. 13. WARNING: - Switch off the TV before connecting any external device. 12 13 OTHER CO

• VGA INPUT 14 15 OTHER CONNECTIONSOTHER CONNECTIONS Q fig. 19 Audio Cables fig. 20 Y fig. 21 RV fig. 22 - You can use your LCD-TV as a monitor for your personal computer. 1. Connect the D type 15-pin VGA interface cable (not supplied) to VGA Input Y on the LCD-TV. See fig. 21. 2. Connect the audio cable (not supplied) to Audio Input R on the back of the LCD-TV

• Haier LT32M1CA, S-VIDEO INPUT - For connecting video recorders. 1. Make sure that the power of the LCD-TV and the AV device are off. 2. Connect the audio and S-Video cables from the VCR's output jacks to the S-Video Input O and Audio Input M. See fig. 23. 3. Turn on the LCD-TV first and then turn on the VCR. 4. Press the VIDEO B or SOURCE K to select the S-VIDEO input. See fig. 24. 16 17 OTHER CONNECTIONSOTHER CONNECTIONS O fig. 23 fig. 24 N M L fig. 25 K COMMON INTERFACE SLOT HEADPHONE OUTPUT 1. Connect a set of stereo headphones (not included) t

• Haier LT32M1CA, NICAM 1. Press the NICAM L to select MONO, STEREO, DUAL 1 and DUAL 2 for ATV channel. Select Audio language for DTV channel. See fig. 26. SOUND 1. Press SOUND P to set the LCD TV to a predefined sound setting. Off / Rock / Pop / Live / Dance / Techno / Classic / Soft. See fig. 27. PICTURE 1. Press PICTURE N to set the LCD TV to a predefined picture setting. User / Cinema / Sport / Vivid / Hi- bright. See fig. 27. 18 19 BASIC OPERATIONBASIC OPERATION fig. 26 fig. 27 AUDIO CONTROL 1. Press the VOL+ Q to increase the volume or VOL- Q to decrease the volume. A number will appear on screen indicating the volume level. See fig. 26. MUTE 1. Press the

• Haier LT32M1CA, PICTURE FORMAT 1. Press the ASPECT J on the remote control to enter the picture format menu. See fig. 29. 2. Use the Up or Down Cursor Y to select a picture format and press the OK X to confirm your choice. See fig. 29. -  Automatic: DTV and HDMI input will automatically display the correct format, while ATV and SCART will need to be set. - Panorama: Removes the black bars on the side of 4:3 broadcasts with minimal distortion. - 4:3: Displays the classic 4:3 format. - Movie expand 14:9: Scales the classic 4:3 format to 14:9. - Movie expand 16:9: Scales the classic 4:3 format to 16:9. - 16:9 subtitle: Display 4:3 pictures us

• Haier LT32M1CA, 1. Press MENU G or U to entry the OSD setting. There are five items in the list: Picture, Sound, TV, Installation and Parental. See fig. 31 and 32. 2. Use the Up or Down Cursor Y to select and press the OK X to confirm your choice. See fig. 31 and 32. 3. Press EXIT V to exit the screen. See fig. 31 and 32. Picture - Shows more picture modes and functions based on your favourite channels and enables you to adjust the colour and brightness setup. Sound - Provides more audio selections. You can also set the audio environment of the LCD TV. TV - Enables you to adjust special functions for country, audio

• Haier LT32M1CA, Balance - To adjust the balance between left/right channels. See fig. 36 and 37. Bass - To adjust the amount of bass. Treble - To adjust the amount of treble. Virtual surround - To add greater depth and dimension to the TV sound. Use the Up or Down Cursor Y to toggle between On or Off. Sound mode - To set the LCD TV to a predefined sound setting. Use the Up or Down Cursor Y to toggle between Off, Rock, Pop, Live, Dance, Techno, Classic, and Soft. AVL - To eliminate the volume differences between channels and progra

• Haier LT32M1CA, TV Country - To select the relevant country. This is the country you are in, or the country whose channels you want to receive if you live near its borders. See fig. 40 and 41. Audio language (Digital TV only) - To display a dialogue enabling the preferred language to be set. This is the language to be used for all channels if it is available. Channels - Use the Up or Down Cursor Y to toggle between Channel scan, Update scan, Analog manual store, Channel skip, Channel sort, and Channel name edit.  Channel scan  1. Use the Up or Do

• Haier LT32M1CA, Channel name edit  1. Use the Up or Down Cursor Y to select Channel name edit in the Channels menu.  2. Press the Right Cursor Y to enter it and press the Up or Down Cursor Y to highlight the program you want to edit.  3. Press the Red Button e to start editing program name.  4. Use the Up or Down Cursor Y to edit name and use the Right Cursor Y to move to the next character. Please refer to the table below for available characters.  5. Press the Green Button a to confirm. See fig. 44 and 45.  Tip: When functions attached to th

• Haier LT32M1CA, Parental Teletext - Use the Up or Down Cursor Y to toggle between :  • Digital teletext language: to select the teletext language. • Decoding page language: to set the teletext language to the regional location. See fig. 48 and 49. Current software info - This menu appears with your TV software information. Reset AV settings - To reset most of the picture and sound settings to their default factory levels. Channel lock - To lock a certain TV channel or external source completely. See fig. 50. Program lock - To control access to programs based on their age ratings. All settings apply to d

• Haier LT32M1CA, TELETEXT - (Designed for Europe PAL/SECAM/DVB-T systems only) TELETEXT - Press TELETEXT g to activate Teletext. Press again to turn off Teletext.  See fig. 51. MIX - Press MIX f to activate Teletext overlaying the TV picture. SIZE - Press SIZE h to change the screen size: Full screen, Top half and Bottom half. SUBPAGE - Press SUBPAGE k to display the sub page (when available) INDEX - Press INDEX m to return to page 100 or the index page; and then press 0 to 9. The teletext page will be numbered and added to the page you se

• Haier LT32M1CA, Common Interface Module - The Common Interface CI Slot K, is designed to accept the Conditional Access CA Module coupled with a Smart card, in order to view pay TV programmes and additional services. Contact your Common Interface service provider for further information about modules and subscription options. Please note that CA modules and smart cards are not included, or supplied as optional extras by us. See fig. 53. 34 35 COMMON INTERFACE MODULE COMMON INTERFACE MODULE fig. 53 K G fig. 54 fig. 5

• Haier LT32M1CA, The following table contains common problems and the solutions to these problems. Please check this list before you contact technicians. Abnormal colours Twisted picture Screen Size  DISPLAY Aspect Ratio  16:9  16:9  16:9  16:9 Resolution  1366 x 768  1366 x 768  1920 x 1080 1920 x 1080 OSD Language  English, German, French, Italian, Spanish, Portuguese, Dutch,  Danish, Finnish, Swedish, Norwegian, Polish, Russian, Greek. ENHANCEMENT Sound Output (RMS Watts)  2x5 W  2x10 W  2x10 W  2x10 W Soun

• PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit. The guarantee

• 2 x size AAA 1.5V fig. 1 1. Insert two new 1.5V size AAA batteries with the and marks correctly aligned into the Remote Control. See fig. 1. NOTE: Make sure your local voltage is 230V, 50Hz. 1. Connect the AC Power Cord to the mains socket. See fig. 2. 1. Connect the Antenna Plug to the Antenna Socket located at the rear of the TV. See fig. 2. 2

• Haier LT32M1CA, WARNING: - Switch off the TV before connecting any external device. 32/37/42/47LCD TV 2 fig. 9 Audio In SCART1 SCART Lead Audio Cables YPbPr VGAHDMI Rear Panel fig. 10 Side Panel Video In HEADPHONE OUTPUT -  Connect a set of stereo headphones (not included) to the Headphone Output for private listening.  See fig. 10. Common Interface Slot SCART2 Headphone Wall Mounting (Optional) 1. Unscrew the stand screws. Then remove the Stand. See fig. 11. 2. Fix the TV to the wall mounting bracket (not supplied), using the stand fixing holes. See fig. 12. Stand fig. 11 Screws fig. 12 Screw Holes QUICK START GUIDE 5 - CONNECTING OTHER DEVICES SCART INPUT - To connect ext

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• Sony KP-51WS500 (348 pages) COLOR REAR VIDEO PROJECTOR SERVICE MANUAL RA-6 CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KP-51WS500 RM-Y909 US/CND SCC-P65HAKP-57WS500 RM-Y909 US/CND SCC-P65JAKP-65WS500 RM-Y909 US/CND SCC-P65KA9-965-932-01ORIGINAL MANUAL ISSUE DATE: 7/2002ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END O …

• Philips 32RF82S (2 pages) 32" Real FlatTMTelevision• Real Flat™ invar picture tube• Active Control™• Scan Velocity Modulation• Two-tuner Auto Window™ PIP• 3 Line Digital Comb Filter• Component video input• Two S-Video jacks• Side AV/headphone jacks• Incredible Surround™ with dbx® hi-fi stereosound and surround sound jacks• Top controls32RF82S32RF82S …

• Philips 42PFL9664H (3 pages) Philips 9000 seriesLCD TV with Ambilight Spectra 2 and Perfect Pixel HD Engine42"Full HD 1080p digital TV42PFL9664HBrings movies to lifeWith Ambilight and breathtakingly sharp picturesBe captivated by the immersive power of Ambilight in an ultra thin and slim design. Featuring the stunning Perfect Pixel HD engine and powerful sound, movies really come …

• RCA F38310 - 38" 16:9 HDTV (6 pages) TELEVISION 16:9F383101 SRS, the SRS symbol , Focus and Sound Retrieval System are registered trademarks of SRS Labs, Inc.2 Dolby Digital is a trademark of Dolby Laboratories Licensing Corp.3 Check your cable company’s compatibility requirements.4 Controls the TV plus primary functions of most brands of VCRs, satellite systems, and cable boxes.5 dbx is a r …

• Samsung LN46E550F6F (62 pages) imagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________Serial No. _____________User ManualContact SAMSUNG WORLD-WIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. C …

• Toshiba 42SL417U (93 pages) 42SL417U46SL417U55SL417UIntegrated High Definition LCD Television© 2011 TOSHIBA CORPORATIONAll Rights ReservedOwner’s RecordThe model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. www.support.toshiba.comFor an …

Comments, Questions and Opinions: