Manualios.com

Sony LMD1541W Operating Instructions Manual

Sony LMD1541W Manual Online:

4.75, 2609 votes
Sony LMD1541W User Manual
Sony LMD1541W User Guide
Sony LMD1541W Online Manual

Text of Sony LMD1541W User Guide:

  • Sony LMD1541W, Installing the Stand (with the Supplied Stand) / Installing on a Rack (For LMD-2041W with the Supplied Mounting Bracket) 15 Installing the Stand (with the Supplied Stand) Install the supplied stand on the bottom of the monitor with the provided screws. Note In the case of LMD-2341W, the control panel cover cannot be used when the supplied monitor stand is installed. Installing on a Rack (For LMD-2041W with the Supplied Mounting Bracket) You can attach a monitor to the rack by using the supplied mounting bracket. 1 Attach the mounting bracket to the monitor. Install the mounting bracket to the top and bottom of the monitor with the provided screws. 2 Attach the unit to

  • Sony LMD1541W, Features 8 Features The LMD-2341W (23.0-type), LMD-2041W (20.0- type) or LMD-1541W (15.3-type) is a multiple format LCD monitor for broadcast or business use featuring a precise image and high performance. It supports digital/ analog main broadcast signals and HDMI 1) , and comes equipped with functions for monitor wall viewing in a studio or a broadcasting van. 1) The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United Sta

  • Sony LMD1541W, Dimensions 40 Dimensions LMD-2341W Front (with the supplied stand) Rear Side (with the supplied stand) Front (with optional monitor stand SU-561) Side (with optional monitor stand SU-561) Mass Approx.: 8.5 kg (18 lb 12 oz) (without a monitor stand) 8.7 kg (19 lb 2.9 oz) (with the supplied stand) 10.6 kg (23 lb 5.9 oz) (with monitor stand SU-561) 50.0 18 50.0 549.5 (21 3 /4) 444.0 (17 1 /2) 352.5 (14 ) 370.5 (14 5 /8) (2) ( 23 /32) (2) 139.1 (5 1 /2) 100 (4) 174.1 (6 7 /8) 100 (4) 100 (4) 171

  • Sony LMD1541W, LCD Monitor Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-2341W LMD-2041W LMD-1541W 4-256-703-17(1) © 2010 Sony Corporation

  • Connecting the AC Power Cord / Selecting the Default Settings 18 Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. 2 Slide the AC plug holder over the cord until it locks. To disconnect the AC power cord Pull out the AC plug holder while pressing the lock

  • Selecting the Menu Language 20 Selecting the Menu Language You can select one of seven languages (English, French, German, Spanish, Italian, Japanese, Chinese) for displaying the menu and other on-screen displays. “ENGLISH (English)” is selected in the default setting. The current settings are displayed in place of the x marks on the illustrations of the menu sc

  • Sony LMD1541W, Adjustment Using the Menus 28 IMD (in-monitor display) SETTING The monitor supports “TSL UMD Protocol - V5.00” provided by Television System LTD. Tally 1 and tally 2 lamp colors, text colors and text display brightness can be set in the setting menu. Notes • Set values to “0x0000” in SCREEN and INDEX of TSL protocol setting before displaying IMD. • The monitor displays English alphabet, numbers, symbolic codes and Japanese letters (i.e. Hiragana and Katakana). Certain symbols cannot be displayed. • Up to 16 characters are displayed in English and Japanese. A voiced sound mark in Japanese

  • Sony LMD1541W, Adjustment Using the Menus 26 USER CONFIG menu The USER CONFIG menu is used for setting the system, marker, T/C display, IMD, WFM/ALM/ VECTOR, focus, function button, closed caption, and audio. SYSTEM SETTING Submenu Setting NTSC SETUP Selects the NTSC setup level from two modes. The 7.5 setup level is used mainly in North America. The 0 setup level is used mainly in Japan. FORMAT DISPLAY Selects the display mode of the signal format and scan mode. • ON: The format and scan mode are always displayed. • OFF: The display is h

  • Sony LMD1541W, Location and Function of Parts and Controls 10 Location and Function of Parts and Controls Front Panel a Tally lamp You can check the status of the monitor by the color of the tally lamp. The tally lamp lights in red, green or amber according to the setting of PARALLEL REMOTE in the REMOTE menu. b i (headphones) jack The audio signal which is selected by the input select button is output in stereo sound. c Speaker The audio signal which is selected by the input select button is output in monaural sound (L + R). When SDI signals are input, the audio which is selected in AUDIO SETTING o

  • Sony LMD1541W, Adjustment Using the Menus 34 AUDIO SETTING REMOTE menu PARALLEL REMOTE TYPE Sets the closed caption display type. • AUTO1: Select this to display automatically 608(VBI)* 3 when SD-SDI signal is input, or to display automatically 708* 1 when HD-SDI signal is input. • AUTO2: Select this to display automatically 608(VBI)* 3 when SD-SDI signal is input, or to display automatically 608(708)* 2 when HD-SDI signal is input. • 708: Select this to display 708* 1 when HD-SDI signal is input. • 608(708)

  • Sony LMD1541W, Adjustment Using the Menus 33 Selecting a display area (LMD-2041W/ LMD-1541W) While selecting NATIVE in the SCAN modes with 1080i or1080P input signal, parts of the image are cut off by the screen panel. Those parts can be displayed by selecting the following display areas: center, top left, top right, bottom right and bottom left. The central area of the image is automatically framed when you select NATIVE. To select a display area 1 Press the function button to which the SCAN function is assigned

  • Sony LMD1541W, Specifications 39 Pin assignment PARALLEL REMOTE connector Modular connector (8-pin) You can allocate functions using the REMOTE menu (see page 34). Note Switching functions continuously allows at least 200 msec to do so. Otherwise, it may not switch correctly. Wiring required to use the Remote Control Connect the function you want to use with a Remote Control to the Ground (Pin 5). Available signal formats The unit is applicable to the following signal formats. a : Adjustable/can be set – : Not adjustable/cannot be set *1 Compatible with 1/1.001 frame rates. *2 1080/24PsF

  • Sony LMD1541W, Adjustment Using the Menus 25 Submenu Setting SUB CONTROL Adjusts finely the adjustment range of the function buttons which CONTRAST, BRIGHTNESS, CHROMA and PHASE are assigned. • CONTRAST: Adjusts the picture contrast. • BRIGHTNESS: Adjusts the picture brightness. • CHROMA: Adjusts color intensity. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. • PHASE: Adjusts color tones. The higher the setting, the more greenish the picture. The low

  • Sony LMD1541W, Adjustment Using the Menus 27 MARKER SETTING T/C (time code) DISPLAY SETTING SD PIXEL MAPPING Selects SD picture size (pixels) according to the input signal format from the COMPOSITE IN connector. When picture signals in the size of 720 × 576 (50i) (or 720 × 487 (60i)) are input Select 720 × 576 (or 720 × 487). This is the default setting. When 702 × 576 (or 712 × 483) is selected, all sides of the input picture are cut off by several pixels. When picture signals in the size of 702 × 576 (50i) (or 712 × 483 (60i)) or equivalent are input Select 702 × 576 (or 712 × 483). When

  • Sony LMD1541W, Adjustment Using the Menus 29 WFM/ALM/VECTOR (waveform monitor, audio level meter, and vectorscope) SETTING TALLY 2 Selects the color of tally 2 lamp displayed in IMD. Selecting “0 (commanded color)” sets the same color as set in TSL command. Selecting from 1 and 8 sets the following colors, regardless of the command setting. • 0: Commanded color • 1: White • 2: Red • 3: Green • 4: Blue • 5: Yellow • 6: Cyan • 7: Magenta • 8: Amber Submenu Setting DISPLAY Select ON to display the WFM (waveform monitor), ALM (audio level meter), or VECTOR (Vectorscope) or OFF not to display. Submenu Setting DISPLAY: xxx WFM/AL

  • Sony LMD1541W, Dimensions 41 LMD-2041W Front (with the supplied stand) Rear Side (with the supplied stand) Front (with optional monitor stand SU-561) Side (with optional monitor stand SU-561) Mass Approx.: 6.7 kg (14 lb 12 oz) (without a monitor stand) 6.9 kg (15 lb 3.4 oz) (with the supplied stand) 8.8 kg (19 lb 6.4 oz) (with monitor stand SU-561) 482.6 (19) 332.8 (13 1 /8) 18 ( 23 /32) 314.8 (12 1 /2) 374.0 (14 3 /4)50.0 (2) 50.0 (2) 116.8 (4 5 / 8 ) 100 (4) 174.1 (6 7 / 8 ) 100 (4) 100 (4) 171.4 (6 3 /4) 38.8 (1 9 /16) 70.2 (2 7 /8) 100.2 (4) 314.8 (12 1 / 2 ) 482.6 (19) 320.0 (12 5 / 8 ) 269

  • Table of Contents 5 Table of Contents Precaution .............................................................. 6 On Safety ............................................................ 6 On Installation .................................................... 6 Handling the LCD Screen .................................. 6 On Burn-in .......................................................... 6

  • Sony LMD1541W, Troubleshooting / Specifications 37 Troubleshooting This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. • The unit cannot be operated t The key protection function works. Set the KEY INHIBIT setting to OFF in the KEY INHIBIT menu. Or, a function that does not work is assigned. Press the RETURN button to check the assigned functions. • The black bars appear at the upper and lower positions of the display t When the signal aspect ratio is different from that of the panel, the black bars appear. This is not a failure of the unit.

  • Sony LMD1541W, Adjustment Using the Menus 30 FOCUS SETTING FUNCTION BUTTON SETTING When VECTOR is selected POSITION Sets the position of the WFM/ALM/ VECTOR display. You can select from among 1 to 4. • 1: Bottom left • 2: Bottom right • 3: Top right • 4: Top left TRANSPARENCY Selects from black and half (transparent) for the background of the WFM/ALM/ VECTOR display. • BLACK: The background is black. Displayed image is hidden behind the background. • HALF: The background is transparent. Displayed image can be seen indistinctly behind the WFM/ALM/VECTOR display. COLOR Selects the displayed line color from white (W), red (R), green (G), blue (B

  • Sony LMD1541W, Adjustment Using the Menus 32 INTRA-FIELD with every press of the button (see I/P MODE on page 26). PHASE Press the button to display the adjustment screen and adjust the color tones. Press again to hide the adjustment screen. However, the color tones remain adjustable. Turn the menu selection control right to increase the green tone and turn left to increase the purple tone. APERTURE Press the button to display the adjustment screen and adjust the picture sharpness. Press again to hide the adjustment screen. However, the picture sharpness remains adjustable. Turn the menu selection contro

More Instructions:

DOWNLOAD
DOWNLOAD
DOWNLOAD
DOWNLOAD

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Apple QuickTake 200 Camera Getting started apple/quicktake-200-camera-B42.pdf 06 Dec 2023 98 0.77 Mb
2 Clarity XL45 Operation & user’s manual clarity/xl45-9D1.pdf 25 Jul 2022 6
3 Savin 3699 Operating instructions manual savin/3699-2WF.pdf 03 Apr 2023 107 2.31 Mb
4 Behringer FEEDBACK DESTROYER FBQ1000 Quick start manual behringer/feedback-destroyer-fbq1000-B9O.pdf 18 Jul 2022 15 2.26 Mb
5 Sylvania SY4100 Owner's manual sylvania/sy4100-I14.pdf 22 Oct 2023 28
6 MTD 117-060-300 Owner's manual mtd/117-060-300-21V.pdf 10 Oct 2022 12

Similar Resources:

  • HP

    XN375A

    (8 pages)
    1. MenuOpens, selects or exits the OSD menu.4. OK/autoIf the OSD menu is on, press to select thehighlighted menu item.If the OSD menu is inactive, press to activate theauto adjustment feature to optimize the screenimage.2. MinusIf the OSD menu is on, press to navigatebackward through the OSD menu and decreaseadjustment levels.5. PowerTurns the monitor on or …
  • Vicon

    VM5094

    (16 pages)
    Vicon part number 8009-8103-00-00 Section 3 Rev 402 XX103 MODEL VM5094 AND VM5124 HIGH-RESOLUTION MONOCHROME MONITORS Copyright © 2002 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice …
  • Philips

    200P6

    (101 pages)
    e-Manual Philips LCD Monitor Electronic User’s Manual file:///D|/My%20Documents/dfu/200P6/english/200P6/index.htm2005-06-08 4:25:57 PM …
  • Philips

    190B6CB

    (2 pages)
    19" SXGA LCD monitor190B6CBbig display for demanding usersDemanding users like you get more done with the 190B6's outstanding big-screen performance backed by the exclusive Philips Perfect Panel warranty, productivity-enhancing remote LAN-based asset management and lead-free design.Outstanding front of screen performance• ISO 13406-2 Class I comp …
  • NEC

    LCD4020-2-AV

    (1 pages)
    AccessoriesNEC SB-L008WU DVI Daisy Chain Module for NEC Large-Screen LCD Displays Multiply your video messaging with ease. An accessory for select NEC MultiSync® 20 Series and M Series large-screen displays, the SB-L008WU DVI daisy chain module is a cost-effective way for you to loop in and out a single digital video signal to up to nine displays. The expa …
  • Dell

    S2340T Touch

    (49 pages)
    Dell™ S2340T Monitor User GuideSetting the display resolution to 1920 x 1080 (maximum) Information in this document is subject to change without notice.© 2012 Dell Inc. All rights reserved.Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell and the D …

Comments, Questions and Opinions: