Manualios.com

Philips MCW770 Custom Installation

Philips MCW770 Manual Online:

4.7, 1024 votes
Philips MCW770 User Manual
Philips MCW770 User Guide
Philips MCW770 Online Manual

Text of Philips MCW770 User Guide:

  • Philips MCW770, 1 2 switches the unit to (Eco Power) standby 2 Source buttons CD selects the CD changer TUNER selects the tuner and toggles between the wavebands: TUNER FM and TUNER AM AUX selects the input for an additional connected appliance and toggles between the input sensitivities: AUX (high level input sensitivity) and AUX CDR (low level input sensitivity) PC LINK A selects the connected PC as source 3 CD1, CD2, CD3, CD4, CD5 selects a disc tray and starts playback 4 VOLUME-, VOLUME+ decreases/increases the volume level 5 A

  • Environmental information All redundant packing material has been omitted.We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your unit consists of materials which can be recycled if disassembled by a specialised company. Please observe the local regulation

  • Philips MCW770, MCW770 Wireless PC Link Micro THANK YOU FOR CHOOSING PHILIPS! NEED HELP FAST? Read your Quick-Use guide and/or owner's manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.p4c.philips.com or call 1-888-PHILIPS(744-5477) while with your product. User manual Manuel d'utilisation Manual del usuario MC W770/37.1 us eng 8/13/04 17:32 Page 1

  • Philips MCW770, 21 English Setting the clock 1 Press and hold CLOCK on the remote control for more than 2 seconds. ➜ SET CLOCK is displayed, the hours and minutes digits start blinking. 2 Press ALBUM 5 or ALBUM ∞ on the remote control repeatedly to set the hour. 3 Press 4 or ¢ on the remote control repeatedly to set the minutes. 4 Press CLOCK on the remote control to confirm the setting. ➜ The clock shows the set time. 00 To exit without storing the clock setting press STOP Ç. Notes: The clock setting will be erased when the system is disconnected

  • Philips MCW770, Important Do not plug in the wireless USB adapter into a USB port of your computer, but start with the software installation first from the CD-ROM.After the necessary driver software has been installed you will be asked by the installation software to plug in the wireless USB adapter.This order of installation will ensure the proper function of your wireless USB adapter. Wireless USB adapter Question Answer I have plugged in the wireless In order that you can install the correct driver USB adapter and completed software for the wireless USB adap

  • Philips MCW770, MCW770 Wireless PC Link Micro Custom Installation MCW770 Contents Manual installation of the driver for the wireless USB adapter, the Philips Media Manager software and the network setup ___________ 2 Installation of an additional audio system or recovery if audio system PC link settings are lost ________ 3–4 Installation of an additional PC server or recovery of PC link settings on your PC __________________ 4–5 Integration of MC W770 into an existing (home) network _______ 6–9 Network utilities _______________ 10–13 Check connection ______________10 Change of USB port using the MC W770 _________________ 10–11 Change of the wireless cha

  • PDCC-LC/JW-435 English Meet Philips at the Internet http://www. philips.com W MC W770 CLASS 1 LASER PRODUCT 3141 075 20451 Need more help or information on installation? Visit: Ayez besoin de plus d'aide ou d'information sur l'installation? Merci de visiter notre site internet: ¿Problemas de Instalación? Para más información, por favor visite nuestra

  • Philips MCW770, 18 English 14 ➜ The following window appears. Enter the network parameter of your network and click on OK.Then click on Save in the previous window. It is recommended to use WEP keys encryption for network security reasons. 15 ➜ The following window appears: The network parameter will be transferred now to the MC W770 and stored as one network configuration in the set. Wireless PC link MC W770/eng 8/23/01 15:34 Page 18

  • Philips MCW770, 0 iR sensor for the infrared remote control Note: Always point the remote control towards this sensor. ! display @ source control lights when a source is active the respective control light lights up # SOURCE toggles between the sources: CD: the CD changer is selected TUNER FM: the FM tuner waveband is selected TUNER AM: the AM tuner waveband is selected AUX: the high level input sensitivity for an additional connected appliance is selected AUX CDR: the low level input sensitivity for an additional connected appliance is selected $ HOME PC LINK: returns to the first level of the file

  • Philips MCW770, 26 English Album and track name display (on MP3-CDs only) ● During playback press DISPLAY on the remote control to see the following information, which will be scrolled once (if available): ➜ Album name ➜ Tr ack name SHUFFLE and REPEAT Repeating a track, a disc or a program 1 During playback press REPEAT on the remote control repeatedly to select either: ➜ REPEAT TRACK:The current track is played repeatedly. ➜ REPEAT DISC:The entire selected disc is played repeatedly. ➜ REPEAT PROG TRACK:The current programmed track is played repeatedly (only if the program mode is acti

  • Philips MCW770, When I press the PC LINK A button, If you receive this message you might need to the display shows NO CONNECTION. restart your Philips Media Manager.To do this, What can I do? click on on the taskbar and select ‘Shutdown Philips Media Manager’. Restart the application from the Windows Start menu. Can PC link work when the PC PC link cannot work when the PC is in standby? is switched off or in standby. UPnP TM is a certification mark of the UPnP TM Implementers Corporation. 39 English Frequently asked questions MC W770/37.1 us eng 8/13/04 17:32 Page 39

  • Philips MCW770, Index EnglishFrançais 5 English ___________________________________ 8 Français ________________________________ 41 Español Español _________________________________ 79 CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. DANGER Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM. CAUTION Changes or modifications not expressly approved by Philips could void your authority to operate this transmitter. Class II equipment symbol This symbol indicates that the unit has a double insulation system. MC W770/37.1 us eng 8/13/

  • Philips MCW770, Warning: Never make or change connections with the power supply switched on. Speaker connections Use the supplied speakers only. Using other speakers can damage the unit or the sound quality will be negatively affected. ● Connect the cable of the left speaker to L (red and black), and the cable of the right speaker to R (red and black) as follows: Press the clip of the red terminal and fully insert the stripped portion of the colored (or marked) speaker cable into the socket, then release the clip. Press the clip of the black terminal and fully insert the stripped portion of the black (or unmarked) speaker cable into the socket, then release the clip.

  • Philips MCW770, On the back 1 SPEAKERS 6 Ω L/R connect to the supplied speakers 2 AC MAINS ~ After all other connections have been made, connect the power cord to the wall outlet. 3 AUX/CDR IN R/L connect to the analog audio output of an additional appliance 4 AM ANTENNA connect the supplied loop antenna here 5 FM ANTENNA connect the supplied wire antenna here On the front 6 DISC 1, DISC 2, DISC 3, DISC 4, DISC 5 selects a disc tray and starts playback 7 OPEN/CLOSE / opens/closes the disc tray 8 disc trays 9 STANDBY-ON 2 switches the unit to (Eco Power) standby Controls and connections 14 English 6 1 2 3 5 4 6 7 8 ! # @ % $ ^ 9 0 ≤ £ ™ ¡ & *( ) MC W770/37.1

  • Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure Return your Product Registration Card today to get the very most from your purchase. *Proof of Purchase Returning the enclosed card guarantees that your date of purchase will be on file, so no a

  • Philips MCW770, Connection problems and problems with link quality Question Answer I have successfully installed my Please check if your PC is still running and if the MC W770, the wireless USB wireless USB adapter is installed correctly. adapter and the software, and it The MC W770 PC link uses radio waves worked nicely until recently. Now I to link between the PC and audio device. have placed the MC W770 in a The output power is limited by legal different room, and it is not able to regulations, and therefore also the distance connect anymore.The display in which the PC link works is limited. Usually shows NO CONNECTION.What can the PC link function works in

  • Philips MCW770, 18 English IMPORTANT ! For preparation, please refer to the “Wireless PC Link Quick Installation” and www.philips.com/support. PC LINK function PC LINK enables you to playback your music collection from the PC via the set. Before playback can be started the connection to an installed network/server must be started. Make sure the wireless USB adapter is connected or another network connection is working properly. 1 Switch on your PC and wait until the PC boot is ready. 2 Press PC LINK A to select the PC as source. ➜ PC LINK is displayed. ➜ SERVER is displayed and the last active server name is scrolled. ➜ The last active server name is displayed and CONNECTING is

  • Philips MCW770, 16 English 7 ➜ Set in the Properties window of your network adapter the option Obtain an IP address automatically. Click on OK. ➜ In Windows XP: under Properties select the Wireless Networks tab and deselect the option Use Windows to configure my wireless network settings. Click on OK. 8 Your wireless network adapter is now ready for installation with the MC W770.With the utility software of your wireless adapter you might check once more if the correct installation network with the correct network parameter is set up and activated. 9 Now you have to activate the Expert Install mode on your

  • Philips MCW770, 22 English Volume control Volume adjustment ● Adjust the volume by using the VOLUME rotary on the unit or by pressing VOLUME+ or VOLUME- on the remote control. ➜ VOLUME and the actual value (between 1 and 39) are displayed. ➜ VOLUME MIN is the minimum volume level. VOLUME MAX is the maximum volume level. MUTE You can temporarily switch off the sound without switching off the unit. 1 Press MUTE on the remote control to switch off the sound. ➜ The selected source and MUTE are displayed. Playback will be continued without sound. 2 Press MUTE on the remote control again to switch on the sound again. Sound control In order to reach an optimal sound, you ca

  • 40 Philips, P.O. Box 671539, Marietta, GA. 30006-0026 One (1) Year Labor and Parts Repair PHILIPS LIMITED WARRANTY PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive war- ranted repair on the product.A sal

  • Philips MCW770, 23 English Playable discs For playback on this unit you can use the following discs (logos shown below): – All pre-recorded audio CDs – All finalised audio CDR and CDRW discs – MP3-CDs (CD-ROMs with MP3 tracks) Supported MP3 disc formats The following formats are supported on this unit: – Disc format: ISO 9660, Joliet or UDF 1.5 – Sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz – Bit rates: 32–256 kbps, variable bit rates – ID3-tag:V1.1,V2.2,V2.3,V2.4 – Maximum number of titles: 999 (depending on the length of the file name) – Maximum number of albums:99 Important! 1) This system is designed for regular discs.Therefore, do not use any accessories s

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Radius m1225 Operator's manual radius/m1225-3F6.pdf 14 May 2023 14
2 Dell PowerVault MD3000i Cli manual dell/powervault-md3000i-68K.pdf 13 Aug 2022 236 1.13 Mb
3 Scott Bacharach CANARY II Instruction manual scott-bacharach/canary-ii-TQ6.pdf 09 Aug 2022 31
4 Sunbather SunSwitch Operating instructions sunbather/sunswitch-9AX.pdf 23 Jan 2024 2
5 Sony VGNSR590GRB Specifications sony/vgnsr590grb-739.pdf 15 Jul 2022 2
6 K-Mate BTR017N Operation & user’s manual k-mate/btr017n-3H5.pdf 27 Nov 2023 5

Similar Resources:

  • GefenTV

    Repeater For HDMI 1.3 GTV-HDMI1.3-141

    (9 pages)
    Repeater For 1.3GTV-HDMI1.3-141User ManualGTV-HDMI1.3-141User Manual Repeater For 1.3GTV-HDMI1.3-141User ManualGTV-HDMI1.3-141User Manual …
  • Toshiba

    Tecra M6-EZ6711

    (44 pages)
    RG 5.375 x 8.375 ver 2.3.3Tecra® M6 Series Resource GuideKeep this guide in a convenient place to access important information about your computer.If you need assistance:❖ Toshiba’s Support Web sitepcsupport.toshiba.com❖ Toshiba Global Support CentreCalling within the United States (800) 457-7777Calling from outside the United States (949) 859-4273 Pl …
  • Agilent Technologies

    34398A RS-232

    (3 pages)
    Agilent 34398A RS-232 Cable Kit Contains a 9-pin female to 9-pinfemale Null Modem (printer) cable and one adapter. Use the cable andadapter to connect Agilent instruments with 9-pin male RS-232connectors to most PCs or printers. The cable kit contains: Null modem cable, 9-pin F to 9-pin F, 2.5 meters (8 ft. 2.5 in.), Agilent Part Number F1047-80002 …
  • Quantum

    DLT 4000

    (12 pages)
    Copyright © 2004 by Quantum Corporation. All rights reserved.Quantum, the Quantum logo, and the DLTtape logo are trademarks of Quantum Corporation, registered in the U.S.A. and other countries. DLT, DLTtape, and Super DLTtape are trademarks of Quantum Corporation.Other company and product names used in this document are trademarks, registered trademarks, or …
  • VIPowER

    Smart Dock VP-8258 Plus

    (1 pages)
    ViPowER, Inc. / www.vipower.comRev.1.0/11.24.2004VP-8258 Plus Smart Dock Installation GuideExt. +5V+12VUSBPOWEROFFONPOWEROFFON2. Using the +5V/+12V AC/DC Power Adapter:4. Plug one end of the USB cable into the USB port on your computer; plug the other end into the USB port on the VP-8258 Plus Smart Dock. 3. Set the Power Select Switch to an …
  • D-Link

    DSM-520

    (2 pages)
    Listen to your favorite songs, view digital photos on the big screen, and be drawn in by high-definition videos. Enjoy all your digital content from the comfort of the living room with the DSM-520. The DSM-520 uses 802.11g wireless technology to stream content from your computer to your home entertainment system.The DSM-520 is capable of playing back high-d …

Network Card Instructions:

Comments, Questions and Opinions: