Sony NAC-SV10i Operating Instructions Manual

Text of Sony NAC-SV10i User Guide:

• Sony NAC-SV10i, 64 GB , Depending on the WMA file format, you may not be able to play some tracks. , The track information may have been changed on the server. Reselect the server in the server list (page 38). , If the playback range has been set to “one track” for some reason, you cannot change the playback range using “Playback Range” in the options menu. In this case, reselect some other item from the content list. , “Network Standby” may be set to “Off.” Turn on the unit or set “Network Standby” to “On” (page 17). , Confirm that the network is correctly set up. If it is not, the connection cannot be made (page

• 40 GB The term “parent folder” used in this section means a folder one level higher in the structure tree than the folder that contains the currently selected item. * 3 You can view this information both when the unit is stopped and when it is playing a track, unless a list of items is displayed. To refresh the server list If you cannot find the desired server in the

• Sony NAC-SV10i, 51 GB Enjoying Sony Multiple-Room Products Playing audio content streamed from a server (such as a computer) using a controller You can use a DLNA controller to stream audio content stored on a server (such as a computer) to the unit. • Check that all devices are connected to your home network and set up correctly. • Check that the unit and the server are turned on or the unit and the server are in the network standby - on mode. • Check that the unit and the controller are allowed to access the server. • Check that the unit and the server have been recognized and registered with the con

• 3 GB received, including interference that may cause undesired operation. This equipment must not be co- located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to O

• Sony NAC-SV10i, 59 GB Additional information Managing the system Updating the system application By downloading the latest version of the system application, you can take advantage of the newest functions. The unit accesses the Sony server to update the system. When a new update is available, you will be notified by a message that appears on the display while the unit is on and connected to the Internet. Make sure that the unit is stopped before updating the system. For details on system update available, refer to the customer support site (page 61). Notes • Make sure not to turn off the unit or disconnect the network cable while the updating operation is in progress. • If you try t

• Sony NAC-SV10i, 60 GB To go back to the previous display Press BACK before the unit starts the system update. You cannot go back to the previous display after the update starts. Formatting the system This function formats the unit and restores it to the condition it was at the time of purchase. Note that this process deletes all settings and information (e.g., clock setting, network settings). 1 Press SETTINGS to enter the settings menu and select “All Reset.” 2 When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER. When “ ” is displayed, the message is continued to th

• Sony NAC-SV10i, 62 GB , The on/standby indicator may not turn off immediately after you unplug the AC power adaptor. This is not a malfunction. The indicator will turn off after 30 seconds. , If the “Network Standby” mode is set to “On,” the clock is displayed when the unit is turned off. , The volume may be minimized. Adjust the volume of the connected amplifier. , Check to make sure that the unit is not paused. , Check the amplifier connections and confirm that the amplifier is turned on. , Check the connections of the device connected to the unit. Check to make sure the proper function

• Sony NAC-SV10i, 81 GB you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you

• Sony NAC-SV10i, 73 GB Precautions/Specifications Glossary AAC Abbreviation for Advanced Audio Coding. It is a standard for audio file compression determined by the MPEG (Motion Picture Experts Group), an ISO (International Organization for Standardization)/ IEC (International Electrotechnical Commission) working group. Bit rate The bit rate is a measure of data volume expressed in bits per second (bps). Byte One of the fundamental units used to express digitized data in computers. Digitized data is commonly exp

• Sony NAC-SV10i, 83 GB License. Of course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which makes passes at compilers) written by James

• 17 GB Getting started Setting the network standby mode While the “Network Standby” mode is set to “On,” the unit can always be connected and controlled over the network. 1 Press SETTINGS to enter the settings menu. 2 Press M/m to select “Network Standby” and press ENTER. 3 Press M/m to select “Off” or “On” and press ENTER. ( : Factory

• Sony NAC-SV10i, 53 GB Additional information As “Access Permission Settings” is set to “Auto” (factory setting) (page 52), the unit adds new devices that have accessed the unit to the “Permitted Devices” list automatically. You can view each list and edit it. Up to 20 devices can be added to a list. Note If the server name cannot be found, “No Name” appears in the “Permitted Devices” list, the “Pending Devices” list, and “Model Name” for “Information” in the options menu. To view a list 1 Press SETTINGS to enter the settings menu and select “

• Sony NAC-SV10i, 75 GB Precautions/Specifications Precautions/Specifications Index A AAC 73 Access control 53 Access Permission 52 Access point 26 Alphabet search 46 Amplifier 14, 16, 19, 32 Audio format 38 Audio In 44 C Clock 22 Condensation 73 Connecting the unit 14 Connections AC power adaptor 14 Amplifier 14 Audio In 44 DLNA 49 Dock Adapters for iPhone models 15 Home network 24 Wired 29 Wireless 25 Controller 49 D Default gateway 30, 31 DHCP 73 DLNA 49, 73 Player 49 Renderer (network controlled player) 49 Server 49 DNS server 30, 73 E Editing Permitted/Pending devices list 53 Server list 40 F Features 8

• Sony NAC-SV10i, 16 GB Basic operations This section explains the basic operations of the unit. Turning on this unit 1 Connect the AC power adaptor to a wall outlet. When you connect the AC power adaptor to a wall outlet, the unit turns on once and the on/ standby indicator lights up in green. After a while, the unit turns off automatically and the on/standby indicator changes to red. 2 Press ?/1 (power). The unit turns on and the on/standby indicator lights up in green. When the unit is turned on for the first time after purchase, you are required to make the initial settings. If this is the case, see “Performing initial setup operations” (page 20). To turn off the unit Press ?/1

• Sony NAC-SV10i, 58 GB Viewing the information of the unit You can view the information of the unit. 1 Press SETTINGS to enter the settings menu and select “Device Details.” 2 Select the item you want to view. To go back to the previous display Press BACK. Display Description Model Name This is the name that is set for this unit and is displayed on the server. System Software You can view the firmware version of this unit. MAC Address(Wired LAN) You can check the MAC address for the wired network of the unit. MAC Address(Wireless LAN) You can check the

• Sony NAC-SV10i, 71 GB Precautions/Specifications “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

• Sony NAC-SV10i, 34 GB • Remote UI mode - off (factory setting): You can use the buttons and controls on your iPod/iPhone to operate it. You can also use some buttons on the unit and the remote control, but the iPod/iPhone content lists are not displayed on the unit. Note You cannot use the buttons and controls on your iPod/ iPhone in the remote UI mode - on mode. To change the operation mode, do the following. 1 While the iPod & iPhone function is selected, press OPTIONS to enter the options menu. 2 Select “Remote UI Mode.” 3 Select “On” or “Off” ( ). ( : Factory sett

• Sony NAC-SV10i, 30 GB 5 Select “Wired LAN.” The unit automatically starts setting up the network connection. 6 When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER. It may take a while for the unit to complete the network settings. When the network settings have been completed, “Complete.” appears. If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 21 and continue the initial setting process. 7 Make the server settings. To list

• 72 GB The menu tree for the settings menu You can set the various settings using the settings menu. The following menu tree shows an overview of the settings for the settings menu. SETTINGS Network Settings Connection Method Wired LAN (page 30) Wireless LAN Connection Type Access Point Scan (page 26) WPS Push (page 27) Manual Registration Direct Input (page 27) T

• Sony NAC-SV10i, 15 GB Getting started 1 Connect the unit to an amplifier. Use an audio connecting cord to connect the unit to an amplifier. Make sure to match the color-coded pins to the appropriate jacks: the white plug to the white (L) jack and the red plug to the red (R) jack. Make sure to turn off the power of the amplifier before making a connection and connect all plugs securely to prevent noise. 2 Connect one end of the AC power adaptor to the DC IN 6 V jack of the unit and the other end to a wall outlet. WARNING DO NOT plug the AC

• Sony NAC-SV10i, 39 GB Enjoying audio content • Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly. • Press BACK to go to the next higher directory. • Press ENTER to go to the next lower directory. 5 Select the track you want to play and press ENTER. The unit starts playing the selected track and the playback display appears. Make sure that there is sound output from the connected amplifier. Tips • If you select a folder (such as an artist folder, genre folder, etc.) and press the N button, the unit plays all

• Sony NAC-SV10i, 45 GB Enjoying audio content Changing the play mode You can listen to tracks in random order (shuffle play) or one track repeatedly (repeat play). Play mode can be changed with the iPod & iPhone function and the Home Network function only. Notes • The play mode that is set on the iPod/iPhone remains active after you place the iPod/iPhone on the unit. You can change the play mode with this unit. If you change the play mode on the unit, the play mode set on the unit remains active on the iPod/iPhone even after it is disconnected from the unit. • If the album shuffle mode is set on the iPod/iPhone, “SHUF” lights up on the display when you connect the iPod/iPhone to the

More Instructions:

	Sony NAC-SV10i Specifications 04-12-2022 2	DOWNLOAD
	Sony NAC-SV10i Quick setup manual 21-10-2023 2	DOWNLOAD
	Sony NAC-SV10i Instruction & operation manual 21-10-2023 14	DOWNLOAD

Related Products and Documents (Network Hardware):

Comparable Devices:

Similar Resources:

• Check Point Smart-1 series (10 pages) Classification [Protected] P/N:705873 © 2018 Check Point Software Technologies Ltd. All rights reserved. For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html. For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html Smart-1 Installing and Removing DC Power Supply Units 7 …

• EMC VNX Series (122 pages) This guide describes one of five models available in the VNX Series, the EMC® VNX5500™. This document provides an overview of the architecture, components, and features of the VNX5500 platform. The specific aspects of the Block, File, and Unified VNX5500 platform and its major components include the front and rear connectors and LED indicators on the 3U, …

• Siemens SIMATIC IPC427E (2 pages) Qualifiziertes Personal – Qualified PersonnelGerät anbauen – Mounting the deviceStromversorgung anschließen – Connecting the power supplySchutzleiter anschließen – Connecting the protective earthZulässige Einbaulagen – Valid Mounting positions1.11.21.32.22.1http://support.automation.siemens.comGerät einbauenMounting the deviceGerät anschließ …

• Opengear KCS6104 (4 pages) KCS6000 Quick Start (520023-Rev 3.2) Page 1 KCS6104 & KCS6116 Quick Start Guide Thank you for purchasing the KCS6104/6116 console server. This Quick Start walks you through installation, configuration and local operation. For more details please refer to the User Manual on the CDROM. Step1 Check kit contents KCS6104/611 …

• ACTi ECD-1000 (2 pages) Before You StartThis guide contains all the information you need to quickly setup the video decoder via local display interface. For detailed information on installations or operations, please refer to the Hardware Manual or User’s Manual on the ACTi website (www.acti.com). Before installation, prepare the following equipment:1. Monitor (HDMI 1080p or Com …

• hilscher netRAPID Chip Carrier (145 pages) Getting Started netRAPID Chip Carrier Hilscher Gesellschaft für Systemautomation mbH www.hilscher.com DOC131104GS04EN | Revision 4 | English | 2017-09 | Released | Public …

Comments, Questions and Opinions: