Manualios.com

Sony STR-DA3700ES Operating Instructions Manual

Sony STR-DA3700ES Manual Online:

3.55, 970 votes
Sony STR-DA3700ES User Manual
Sony STR-DA3700ES User Guide
Sony STR-DA3700ES Online Manual

Text of Sony STR-DA3700ES User Guide:

  • Sony STR-DA3700ES, 28 US 3: Connecting the video equipment To connect equipment with HDMI jacks If your equipment does not have an HDMI jack, see page 29. A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. * You can connect any equipment with HDMI output jacks to the HDMI IN jacks of the receiver. Connections required for watching content recorded on a Blu-ray Disc or DVDs DVD player, Blu-ray Disc Player Video/audio signals A *

  • Sony STR-DA3700ES, 47 US Getting Started 8: Setting up connected equipment To output multi-channel digital audio, check the digital audio output setting on the connected equipment. For a Sony Blu-ray Disc Player, check that “Audio (HDMI),” “DSD Output Mode,” “Dolby Digital,” and “DTS” are set to “Auto,” “On,” “Dolby Digital,” and “DTS,” respectively (as of September 1, 2011). For a PlayStation 3, check that “BD/DVD Audio Output Format (HDMI)” and “BD Audio Output Format (Optical Digital)” are set

  • Sony STR-DA3700ES, 135 US Additional Information • If you set “Auto Access Permission” to “On” in “Renderer Options” (page 104), any controller detected can be available automatically. • Is the network controller listed on “Renderer Options,” and is it set to “Allow”? If the box is not checked, check the box for “Auto Access Permission,” and return to the home menu. Then, operate the receiver using the network controller once, and then uncheck the box for “Auto Access Permission,” if necessary. • If the network controller is a computer software controller, is the soft

  • 66 US Message list Message appears in GUI menu [Display window] Explanation Remedies Antenna Error [ANTENNA ERROR] The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. Acquiring Signal [ACQUIRING] The receiving condition is not good. Try moving the antenna to another location. For details about

  • Sony STR-DA3700ES, 94 US To set a compensation type for the speakers You can select the compensation type to be used for the speakers for each Position. 1 Select the “Position” for which you want to set the speaker compensation type, then press . 2 Select the “Calibration Type” you want, then press . •Full Flat Makes the measurement of frequency from each speaker flat. • Engineer Sets the frequency to match that of the Sony listening room standard. • Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speakers. •Off Sets

  • Sony STR-DA3700ES, 30 US It is not necessary to connect all the cords. Connect cords according to the jacks of your equipment. * When you connect equipment with an optical digital jack, set “Audio Input Assign” in the Input Settings menu (page 82). Connections required for playing video games PlayStation 3 (video game with an HDMI jack) A Video/audio signals or BC D Audio signals Video signals Video game without an HDMI jack *

  • Sony STR-DA3700ES, 136 US The Audio Return Channel (ARC) does not work. • Make sure “Control for HDMI” is set to “On” in the HDMI Settings menu. • Make sure that the INPUT MODE for “TV” is set to “AUTO” (page 81). The remote control does not function. • Point the remote control at the remote sensor on the receiver (page 10). • Remove any obstacles in the path between the remote control and the receiver. • Replace all the batteries in the remote control with new ones, if they are weak. • Make sure that the command modes of the receiver and the remote control are the same. If the command mode of the receive

  • Sony STR-DA3700ES, 138 US Reference sections If the buttons on the receiver or the remote control do not work due to a malfunction of the receiver, reboot the receiver. Hold down ?/1 for 10 seconds. When the lamp above ?/1 flashes in green, the reboot starts. Refer to the following web site for details of the latest information on the receiver. http://www.sony.com/essupport Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 25

  • Sony STR-DA3700ES, 139 US Additional Information Frequency response 3) 3) When “2ch Analog Direct” is being used. Inputs (Analog) Inputs (Digital) Outputs FM tuner section Tuning range 87.5 – 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced AM tuner section Intermediate frequency 450 kHz Antenna (aerial) Loop antenna (aerial) Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms P B : 0.7 Vp-p, 75 ohms P R : 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through HDMI Video Input/Output (HDMI Repea

  • 137 US Additional Information Message list after Auto Calibration measurement Display Explanation Code 31 SPEAKERS (A/B/A+B/OFF) is set to OFF. Set to other speaker settings and reperform the measurement. Code 32 None of the speakers were detected. Make sure that the plug of the optimizer microphone is inserted all the way inside the AUTO CAL MIC jack, then reperform the A

  • 88 US The command modes of both the receiver and the remote control are those of the factory default setting (COMMAND MODE AV2). The receiver and the remote control, on the contrary, should use the same command mode. If the command modes of the receiver and the remote control are different, you cannot use the remote control to operate the receiver. 1 Press ?/1 to turn off the receiver. 2 W

  • Sony STR-DA3700ES, 134 US Other characters may not be displayed correctly. It takes a long time before playback starts. • The reading process can take a long time in the following cases. – There are many folders or files on the USB device. – The file structure is extremely complex. – The memory capacity is excessive. – The internal memory is fragmented. Thus, we recommend following the guideline. – Total files per folder: 500 or less The iPhone/iPod cannot be charged. • Check that the receiver is turned on. • Make sure the iPhone/iPod is connected firmly. The iPh

  • Sony STR-DA3700ES, 121 US Using the Remote Control To control an LD player To control a video CD player To control a VCR * If an AIWA VCR does not work even though you enter the code for AIWA, enter the code for Sony instead. To control a satellite tuner (box) PIONEER 509, 525, 526, 540, 551, 555 PORTLAND 503 QUASAR 509, 535 RADIO SHACK 503, 510, 527, 565, 567 RCA/PROSCAN 503, 510, 523, 529, 544 SAMSUNG 503, 515, 517, 531, 532, 534, 544, 556, 557, 562, 563, 566, 569 SAMPO 566 SABA 530, 537, 547, 549, 558 SANYO 508, 545, 546,

  • Sony STR-DA3700ES, 73 US Enjoying Sound Effects Using the Advanced Auto Volume function You can adjust the volume appropriate to each type of content automatically. This function is useful, for example, when the sound of a commercial is louder than the TV programs. 1 Select “Settings” from the home menu, then press . 2 Select “Audio Settings,” then press . 3 Select “Advanced Auto Volume,” then press . 4 Select “On,” then press . Notes • Be sure to reduce the volume level before you turn off this function. • The Advanced Auto Volume function may not work, depending on the audio format. • This func

  • Sony STR-DA3700ES, 69 US Enjoying Sound Effects About the effect type for HD- D.C.S. HD-D.C.S. has three different types: Dynamic, Theater, and Studio. Each type has different reflection and reverberation sound mixture levels and is optimized to match a listener’s room uniqueness, taste and mood. x Dynamic The “Dynamic” setting is suitable for an environment which is reverberant but lacks a spacious feeling (where sound absorption is not sufficient). This setting emphasizes the reflection of sound and reproduces the

  • Sony STR-DA3700ES, 86 US Tip You can recall the setting(s) saved for “1: Movie” or “2: Music” directly by pressing EASY AUTOMATION 1 or EASY AUTOMATION 2 on the remote control. You can also overwrite “1: Movie” or “2: Music” with the present settings by holding down EASY AUTOMATION 1 or EASY AUTOMATION 2 for 3 seconds in the same way as you do when you select “Import Current Settings” from the menu. Using the sleep timer You can set the receiver to turn off automatically at a specified time. 1 Press AMP. The receiver can be operated using the remote control. 2 Press

  • Sony STR-DA3700ES, 93 US Adjusting Settings Easy Setup Re-runs the Easy Setup to make the basic settings. Follow the on-screen instructions (page 45). Speaker Settings You can set up your viewing environment (with the speaker system you are using) either automatically or manually. Performs the D.C.A.C. (Digital Cinema Auto Calibration) function. This function allows you to perform automatic calibration, such as checking the connection between each speaker and the receiver, adjusting the speaker level, and measuring the distance of each speaker from your

  • Sony STR-DA3700ES, 26 US 2: Connecting the monitor You can watch the selected input image when you connect the HDMI OUT or MONITOR OUT jacks to a TV. You can operate this receiver using a GUI (Graphical User Interface). It is not necessary to connect all the cords. Connect cords according to the jacks of your equipment. TV monitor with an HDMI jack AB Audio signals CD E Video signals TV monitor without an HDMI jack Audio signals Video signals or or A If you connect the receiver to an Audio Return Channel (ARC)-compatible TV’s HDMI jack via an HDMI cable, this connection is not necessary. If you con

  • Sony STR-DA3700ES, 109 US Adjusting Settings Operating without using the GUI You can operate the receiver using the display window of the receiver even if the TV is not connected to the receiver. 1 Turn on the receiver. 2 Press AMP MENU. The menu is displayed in the display window of the receiver. Example: When you select “SPEAKER.” 3 Press V/v repeatedly to select the menu, then press . 4 Press V/v repeatedly to select the menu item, then press . The parameter appears. 5 Press V/v repeatedly to select the parameter you want, then press . The parameter is entered. To return to the previous step Press RETURN/EXIT O. Using the menu in the display window V/v/b, RETURN/ E

  • 39 US Getting Started It is not necessary to connect all the cords. Connect cords according to the jacks of your equipment. A Optical digital cord (not supplied) B Audio cord (not supplied) Notes • When connecting optical digital cords, insert the plugs straight until they click into place. • Do not bend or tie optical digital cords. Tip All the digital audio jacks

Related Products and Documents (Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Apple Power Macintosh 4400 Operation & user’s manual apple/power-macintosh-4400-967.pdf 27 Dec 2022 205 2.98 Mb
2 Kenwood TK-2307 Specifications kenwood/tk-2307-EPH.pdf 28 Jun 2023 2
3 Farenheit VB 1 Ownersmanual farenheit/vb-1-HUD.pdf 30 Jul 2023 3
4 Husqvarna 326RJX Operator's manual husqvarna/326rjx-X98.pdf 26 Jul 2023 36
5 Panasonic AYEB500 - HARD DISK BOX Installation manual panasonic/ayeb500-hard-disk-box-Y98.pdf 20 Mar 2023 12 0.36 Mb
6 Panasonic NV-HV61EB Operating instructions manual panasonic/nv-hv61eb-I22.pdf 27 Aug 2023 40

Similar Resources:

  • Onkyo

    TX-NR3008

    (116 pages)
    AV ReceiverTX-NR5008TX-NR3008Instruction ManualThank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit.Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future refe …
  • McIntosh

    MAC 4100

    (3 pages)
    A CONSUMER'S GUIDEPreparation supervised byRobert Long. Harold A Rodgers.and Edward J. FosterLaboratory data (unless otherwise rioted)supplied by CBS Technology CenterMclntosh's New Receiver: Breeding TellsMac 4100 stereo FM/AM receiver, in case with simulatedwood-grain finish, Dimensions: 185/8 by 53/4 inches (front), 14inches deep plus clearance …
  • Pioneer

    VSX-D514-S

    (91 pages)
    ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2004UPDOWNMULTI J …
  • FBII

    ZR401

    (2 pages)
    N9931V1 3/01ZR401/ZR402/OMNI-RFRF ReceiverINSTALLATION INSTRUCTIONSGeneral InformationThe ZR401/ZR402/OMNI-RF is an RF receiver for use with compatible control panels. The receiverprovides communication between wireless devices and the control panel.The ZR402 (version 1.2) and Omni-RF support RF Jam detection. Refer to the control panelinstructions for deta …
  • iPort

    EX-1

    (9 pages)
    GeneralWhy was the iPort developed?What is the benefit of the iPort?Who is iPort – I have never heard of that brand name?Is iPort a licensee of Apple?How do I buy an iPort product?Why does it cost more than an iPod?Does the iPort charge my iPod?Does the iPort come in different colors?What iPod models are supported by the iPort IW/FS models?Which iPort mode …
  • Samsung

    HT-AS720S

    (25 pages)
    Instruction Manual Digital Surround AV Receiver System HT-AS720SSAMSUNG ELECTRONICS CANADA,INC.HEADQUARTERS55 Standish Court Mississauga,Ontario L5R 4B2 CanadaTEL:1-905-542-3535www.samsung.caSERVICE DIVISION55 Standish Court Mississauga,Ontario L5R 4B2 Canada1-800-SAMSUNG (1-800-726-7864)HT-AS720S-XAC-ENG-표지.indd 2-3HT-AS720S-XAC-ENG-표지.indd …

Comments, Questions and Opinions: