Manualios.com

Philips DCTG1500B/93 Operation & User’s Manual

  • DCTG1500B/93 Cordless Telephone
  • mae1hBqjMxAgQ
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 39

Philips DCTG1500B/93 Manual Online:

3.6, 2966 votes
Philips DCTG1500B/93 User Manual
Philips DCTG1500B/93 User Guide
Philips DCTG1500B/93 Online Manual

Text of Philips DCTG1500B/93 User Guide:

  • Philips DCTG1500B/93, 24 Personal settings 6.3 Change the display language Your handset can support different display languages, depending on your country selection during the WELCOME mode. Press m key in idle mode, scroll : to PERSONAL SET and press < OK , scroll : to LANGUAGE and press < OK . Scroll : to your desired language and press < OK to confirm. • A validation tone is emitted and the screen returns to previous menu. Tip Once the display language is set, the option menus on the handset will switch to display in the selected language immediately. 6.4 Activate/deactivate auto hang-up This function enables you to end a call automaticall

  • Philips DCTG1500B/93, Important 5 Disposal instructions for batteries: Batteries should not be disposed of with general household waste. Packaging information: Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste. A financial contribution has been paid to the associated national recovery & recycling system. The labelled packaging material is recyclable. 1.6 Electric, Magnetic and Electromagnetic Fields ("EMF") 1. Philips Royal Elec

  • Philips DCTG1500B/93, 26 Clock and Alarm Scroll : to OFF , ON ONCE or ON DAILY and press < OK . If you select ON ONCE or ON DAILY , enter the time (HH-MM) for the alarm and scroll : to select AM or PM if the time is in 12 HOURS format. Press < OK to confirm. • A validation tone is emitted and the screen returns to previous menu. Note The alarm tone and alarm icon will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset. 7.4 Set alarm tone Press m in idle mode, scroll : to CLOCK&ALARM and press < OK , scroll : to ALARM TONE and press < OK . Scroll : to MELODY 1 , MELODY 2 or MELODY

  • Philips DCTG1500B/93, 10 Getting started 3 Getting started 3.1 Connect the base station Place the base station in a central location near the telephone line socket and electricity socket. Connect the line cord and the power cable to their corresponding connectors at the back of the base station. Connect the other end of the line cord and power cable to their respective sockets. Note The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. Warning Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or elect

  • Philips DCTG1500B/93, Table of contents 1 1Important 3 1.1 Power requirements 3 1.2 Safety Information 3 1.3 Conformity 4 1.4 Using GAP standard compliance4 1.5 Recycling and disposal 4 1.6 Electric, Magnetic and Electromagnetic Fields ("EMF") 5 2 Your phone 6 2.1 What’s in the box 6 2.2 Overview of your phone 7 2.3 Display icons 9 2.4 Overview of the base station 9 3Getting started 10 3.1 Connect the base station 10 3.2 Wall mounting the base 10 3.3 Install your phone 11 3.4 Welcome mode 12 3.5 Menu structure 14 4 Using your phone 15 4.1 Make a call 15 4.2 Answer a call 15 4.3 End a call 15 5 Use more of your phone 16 5.1 Switch the handset on/off 16 5.2 Keyp

  • Advanced settings 29 8.6 Set prefix This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on chapter 4.1.1). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling. You can enter up to a maximum of 5 digits for th

  • Philips DCTG1500B/93, Advanced settings 27 8 Advanced settings 8.1 Change Master PIN The Master PIN is used for registration/ unregistration of handsets. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required. Note The default pin code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code. Press m key in idle mode, scroll : to ADVANCED SET and pres

  • Philips DCTG1500B/93, 2Table of contents 8 Advanced settings 27 8.1 Change Master PIN 27 8.2 Registration 27 8.3 Unregister 28 8.4 Country selection 28 8.5 Reset unit 28 8.6 Set prefix 29 8.7 Change recall time 29 8.8 Change the dial mode 29 8.9 Set first ring 29 8.10 Default settings 30 9 Technical data 31 10 Frequently asked questions 32 11 Index 34 Table of contents CD150_IFU_master_UK.book Page 2 Tuesday, February 19, 2008 9:11 AM

  • Philips DCTG1500B/93, 4Important 1.3 Conformity We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com. 1.4 Using GAP standard compliance The GAP standard guarantees that all DECT TM GAP handsets and base stations comply with a minimum operating standard i

  • Philips DCTG1500B/93, 22 Use more of your phone Press r key on the called handset to answer the internal call, where both internal callers can talk. • Intercom is established. Press and hold i key for 2 seconds on the first handset to start the three-party conference. • CONFERENCE will be displayed on the screen once the conference call is established. 5.9 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. Press V key on the base station. • All the registered handsets start to ring. Once retrieved, press any key on the handset to end the paging. Note If

  • Philips DCTG1500B/93, Use more of your phone 19 entry, the name will be displayed instead. To view the details, press < OK key. Note To return to idle mode, press e key. 5.6.2 Save a redial number into the phonebook Press l key in idle mode to go to the redial list, scroll : to select an entry and press < OK . Press m again to enter SAVE NUMBER . ENTER NAME is displayed on the screen. Enter the name of the contact (maximum 12 characters) and press < OK . • SAVED ! is displayed for 2 seconds and the screen returns to redial list. Note Press c BACK to delete the last digit or character entered. 5.6.3 Delete a redial number Press l key in idle mode to go to the redial list, scrol

  • Philips DCTG1500B/93, Clock and Alarm 25 7 Clock and Alarm This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01/01 and 00-00 respectively. 7.1 Set date and time Press m in idle mode, scroll : to CLOCK&ALARM and press < OK , press < OK to enter DATE/TIME . The last stored date is displayed. Enter the current date (DD/MM) and press < OK . The last stored time is displayed. Enter the current time (HH-MM). Scroll : to select AM or PM if the time is in 12 HOURS

  • 8 Your phone L Mute key During a call: Mute/unmute the handset microphone. M Call transfer/Intercom key In idle mode: Initiate an internal call. During a call: Hold the line and page another handset or toggle between an external and internal call. Long press to initiate a conference call. N Microphone O Battery door M i CD150_IFU_master_UK.book Page 8 Tuesday, February 19, 2008

  • Philips DCTG1500B/93, 16 Use more of your phone 5 Use more of your phone 5.1 Switch the handset on/off Press and hold e key for more than 5 seconds to switch on/off the handset in idle mode. 5.2 Keypad lock/unlock Press and hold * key for 1 second to lock/unlock the keypad in idle mode. 5.3 Text or number entry When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times. For example, to enter the name “PAUL”: Press 7 once: P Press 2 once: PA Press 8 twice: PAU Press 5 three times: PAUL The table below gives you the character assignment during text or number entry: Tip Press c BACK to delete th

  • Philips DCTG1500B/93, 32 Frequently asked questions 10 Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! • Check charger connections. icon is not blinking during charge! • Battery is full: There is no need to charge the battery. • Bad battery contact: Adjust the handset slightly.

  • Important 3 1Important Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone. 1.1 Power requirements • This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost. • The Electrical network is classified as hazardous. The only way to power d

  • Philips DCTG1500B/93, 12 Getting started Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly. The battery icon on the display blinks during charge. The battery icon becomes steady when the handset is fully charged. Note Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink. Tip When

  • Philips DCTG1500B/93, Using your phone 15 4 Using your phone 4.1 Make a call 4.1.1 Predialling Dial the number (maximum 24 digits). Press r key. • The call is initiated. Tip You may insert a prefix number to the beginning of your predial number, see “Set prefix” on chapter 8.6 for more information. 4.1.2 Direct dialling Press r key to take the line. Dial the number. • The call is initiated. 4.1.3 Call from redial list Press l key in idle mode. Scroll : to an entry in the redial list. Press r key. • The call is initiated. 4.1.4 Call from the call log Press u in idle mode. Scroll : to an entry in the call list. Press r key. • The call is initiated. Note You need to subscribe to Caller Li

  • © 2008 Koninklijke Philips Electronics N.V. All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Document number: 3111 285 41591 P r i n t e d i n C h i n a

  • Philips DCTG1500B/93, 28 Advanced settings If no base is found within a certain period, NO BASE will be displayed with an error tone to indicate failed registration and the handset returns to idle mode. 8.3 Unregister Press m key in idle mode, scroll : to ADVANCED SET and press < OK , scroll : to UNREGISTER and press < OK . Enter the Master PIN when prompted and CONFIRM? is displayed on the screen. Press < OK to confirm. Scroll : to select the handset number to unregister and press < OK . • A validation tone is emitted to indicate successful unregistration and the

  • 14 Getting started 3.5 Menu structure The table below describes the menu tree of your phone. Press m key to display the main menu. Use navigation keys : to navigate within the menus and press < key to enter each option. PHONEBOOK NEW ENTRY LIST Phonebook entries EDIT DELETE DELETE ALL DIRECT MEM. KEY 1/2 PERSONAL SET HANDSET NAME HANDSET TONE RING VOLUME OFF/LEVEL 1/LEVEL 2/LEVE

  • Philips DCTG1500B/93, Use more of your phone 17 to put the current call on hold and answer the second call. Press v+1 key to go back to the first caller. The above operations may be different according to your network. 5.5 Using your phonebook Your phone can store up to 50 phonebook memories. Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for name. 5.5.1 Store a contact in the phonebook Press m key in idle mode, scroll : to PHONEBOOK and press < OK . Press < OK again to enter NEW ENTRY .

  • Philips DCTG1500B/93, Your phone 9 2.3 Display icons AStatus bar Indicates battery is fully charged. Indicates battery is fully discharged. Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Indicates new voice messages received. Icon blinks when there are unread messages. Displays when the call log is accessed. Icon blinks when there are new missed calls. Displays when the phonebook is accessed. Displays when the alarm clock is activated. Displays when ringer off is activated. Indicates that the

  • Philips DCTG1500B/93, 20 Use more of your phone To view the details, press < OK to display the call log menu. Press < OK again to enter VIEW . • The date and time of the call is displayed. Press < OK again to view more details. 5.7.2 Consulting the call list The screen can either display : • the caller’s number* • the caller’s name (if recorded in the phonebook)* •< WITHHELD > if it is a private call. •< UNAVAILABLE > if it is a public or out of area call. * Subject to a subscription with your network operator. If Caller Line Identification (CLI) is not subscribed, there will be no entries in the call log. Note You can display the phone numb

Related Products and Documents (Cordless Telephone):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Seagate SCSI Interface Product manual seagate/scsi-interface-EY5.pdf 20 Sep 2023 276 4.94 Mb
2 Kenmore 17920 Owner's manual kenmore/17920-N6B.pdf 30 Oct 2022 48
3 Hammer Strength Olympic Olympic Heavy Duty Owner's manual hammer-strength/olympic-olympic-heavy-duty-M5L.pdf 07 Jan 2024 8 1.42 Mb
4 JVC HR-XVC16BUC Instructions manual jvc/hr-xvc16buc-92F.pdf 15 Mar 2023 40
5 Lightwave JSJSLW922 Instruction manual lightwave/jsjslw922-X59.pdf 11 Jan 2023 19
6 Yamaha YSP-4300 Quick reference manual yamaha/ysp-4300-F9N.pdf 20 Jan 2024 2 0.7 Mb

Similar Resources:

  • VTech

    CS6114

    (2 pages)
    What’s in the boxYour telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Handset overview1 – Handset earpiece2 – LCD display3 – CID/VOL-• Review the caller ID log when the telephone is not in use.• Scroll down while in a menu, or in the directory, caller …
  • GE

    00003191

    (2 pages)
    Plug the power supply cord into the power jack on the bottom of the base and the other end into an electrical outlet. The in use/charge indicator (on the base) turns on to indicate the battery is charging when the handset is on the cradle.Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance …
  • Siemens

    Gigaset S44

    (159 pages)
    EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH.We ho …
  • SpectraLink

    7480

    (16 pages)
    1Spectralink 7480 HandsetThe Spectralink 7480 handset User Guide is available for download at: www.spectralink.com.Safety and Regulatory InstructionsThe CE marking indicates compliance with EEC Directives 94/9 EC and 1999/5/EC. A full copy of the Declaration of Conformity can be obtained from Spectralink Europe ApS, Langmarksvej 34, 8700 Horsens, Denmark.The …
  • Panasonic

    KX-TG1611AL

    (32 pages)
    Thank you for purchasing a Panasonic product.Please read these operating instructions before using the unit and save them for future reference.This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company.Before initial use, see “Getting Started” on page 8.Please access our online …
  • Panasonic

    KX-TG7872AZ

    (80 pages)
    Operating InstructionsModel No. KX-TG7872AZKX-TG7873AZDigital Cordless Telephonewith Link-to-Cell SystemModel shown is KX-TG7872.Before initial use, see “Getting Started”on page 10.Thank you for purchasing a Panasonic product.Please read these operating instructions before using the unit and save them forfuture reference.To use this unit in your country, …

Comments, Questions and Opinions: