Manualios.com

HP DC367B - Compaq Basic Port Replicator 1.2 Reference Manual

  • DC367B - Compaq Basic Port Replicator 1.2 Docking Station
  • mamJxnDDGU9bw
  • Reference Manual
  • PDF / Adobe Acrobat Reader
  • 26

HP DC367B - Compaq Basic Port Replicator 1.2 Manual Online:

4.15, 2094 votes
HP DC367B - Compaq Basic Port Replicator 1.2 User Manual
HP DC367B - Compaq Basic Port Replicator 1.2 User Guide
HP DC367B - Compaq Basic Port Replicator 1.2 Online Manual

Text of HP DC367B - Compaq Basic Port Replicator 1.2 User Guide:

  • HP DC367B - Compaq Basic Port Replicator 1.2, Reference Guide 1–1 1 Getting Started Identifying Top Components Component Description 1 Power button Turns on power to the computer. 2 Power light Indicates the state of the computer and is turned on when the computer is turned on. 3 Docking posts (2) Align and secure the computer for proper connection to the HP Docking Station. (Continued)

  • HP DC367B - Compaq Basic Port Replicator 1.2, Docking and Undocking Reference Guide 2–5 Undocking the Computer 1. Close the computer. If you close the computer when the power is on, the computer may enter standby mode. To resume operation after undocking, open the computer, and then press the power button.

  • HP DC367B - Compaq Basic Port Replicator 1.2, Using the Docking Station Reference Guide 3–3 To install the cable lock: 1. Loop the cable around a stationary object. 2. Turn the docking station upside down, and then remove the screws from the cable lock bezel 1. 3. Remove the bezel from the docking station 2, and then remove the bezel blank from the cable lock bezel 3.

  • 3–4 Reference Guide Using the Docking Station 4. With the lock and key in the unlocked position and with the T-bar on the back of the lock in the vertical position, insert the lock into the center groove in the cable lock slot in the docking station 1. 5. Insert the cable into the recessed cable channel in the base of the docking station 2.

  • HP DC367B - Compaq Basic Port Replicator 1.2, Reference Guide 2–1 2 Docking and Undocking Connecting to AC Power Connect the docking station to AC power at all times. Å WARNING: To reduce the risk of electric shock or damage to your equipment: ■ Plug the power cord into an AC outlet that is easily accessible at all times. ■ Disconnect the power from the product by unplugging the power cord from the AC outlet. ■ If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. ■ Do not place anything on power cords or ca

  • HP DC367B - Compaq Basic Port Replicator 1.2, Troubleshooting Reference Guide A–3 Undocking Problems Problem Possible Cause Solution The computer will not disconnect from the docking station. The connectors are jammed. Press the eject button all the way in. If the computer does not disconnect, repeat this procedure to disconnect the computer. Ä Applying excessive force may damage connector pins. The HP/Kensington Cable Lock is in the locked position. Unlock the lock and then disconnect the computer.

  • HP DC367B - Compaq Basic Port Replicator 1.2, Getting Started Reference Guide 1–7 Getting More Information Å WARNING: To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation setup, and proper posture, health, and work habits for notebook users. The Safety and Comfort Guide also provides important electrical and mechanical safety information. This guide is available on the Web at http://www.hp.com/ergo, on the notebook hard drive, and through the Help and Support Center at Start > Help and Support. ■ The Notebook Documentation CD, included with the computer, contains comprehensive information about your computer, as well as governmental agency and safety in

  • HP DC367B - Compaq Basic Port Replicator 1.2, 1–4 Reference Guide Getting Started Identifying Right-Side Components Component Description 1 Computer eject button and docking light Ejects the computer from the docking station. Docking light is turned on when the computer is properly aligned. ✎ Refer to Chapter 2, “Docking and Undocking,” for details. 2 Integrated cable lock slot Supports the HP/Kensington Cable Lock, which secures the docking station and a connected computer.

  • HP DC367B - Compaq Basic Port Replicator 1.2, Reference Guide 3–1 3 Using the Docking Station Turning the Computer On and Off When you connect a computer to the docking station, you can turn the computer on and off using either the computer power button or the docking station power button 1. When you turn on the system, the power button light is turned on 2. When you properly align the computer to the docking station, the docking light 3 is turned on. ✎ The docking light will not be turned on when you dock the computer unless the AC adapter is connected to the docking station. For help with most common docking problems, refer to Appendix A, “Trouble

  • HP DC367B - Compaq Basic Port Replicator 1.2, 1–2 Reference Guide Getting Started 4 Computer eject mechanisms (4) Disconnect the computer from the docking station when you press the eject button. 5 Docking connector Connects the computer to the docking station. 6 Visual alignment indicator Helps you correctly align the computer when connecting it to the docking station. 7 Computer eject button and docking light Ejects the computer from the docking station. Docking light is turned on when the computer is properly aligned. ✎ Refer to Chapter 2, “Docking and Undocking,” for details. Component Description

  • HP DC367B - Compaq Basic Port Replicator 1.2, Getting Started Reference Guide 1–3 Identifying Left-Side Components Component Description 1 Power button and power light Turns on power to the computer. The light indicates the state of the computer, and is turned on when the computer is turned on. 2 USB 2.0 port Allows you to connect USB devices. 3 Powered USB 2.0 port Allows you to connect select USB devices, such as the HP External MultiBay II.

  • A–4 Reference Guide Troubleshooting External Device Problems Problem Possible Cause Solution A new device is not recognized as part of the system. The computer may be properly aligned, but is not fully seated or docked in the docking station. Lift the computer away from the docking station. Then realign the computer visual alignment indicator with t

  • HP DC367B - Compaq Basic Port Replicator 1.2, 1–6 Reference Guide Getting Started 8 RJ-11 (modem) jack Connects a telephone cable. 9 RJ-45 (network) jack Connects a network cable. - USB 2.0 ports (2) Connect USB devices. q Power connector Connects the docking station to the AC adapter. w External monitor port Connects a VGA monitor. e Serial port Connects a serial device such as a mouse. r Keyboard connector Connects a PS/2 keyboard. t Audio-in (microphone) jack Connects home audio equipment such as CD and MP3 players. y Composite video port Connects a composite video device such as a TV. u S-Video jack Connects an S-Video device suc

  • HP DC367B - Compaq Basic Port Replicator 1.2, Getting Started Reference Guide 1–5 Identifying Rear Components Component Description 1 Security cable slot Connects an optional security cable lock. 2 Monitor stand port Connects an optional HP Monitor Stand to the docking station. 3 Audio-out (headphone) jack Connects an audio output device such as headphones or speakers. 4 Mouse connector Connects a PS/2 mouse. 5 Parallel port Connects a parallel device such as a printer. 6 Digital video (DVI) port Connects a DVI device such as a flat panel monitor. 7 Power light Is turned on when the docking station is connected to AC power. (Cont

  • HP DC367B - Compaq Basic Port Replicator 1.2, Docking and Undocking Reference Guide 2–3 Docking the Computer 1. Close the computer. If you close the computer when the power is on, the computer may enter standby mode. To resume operation after docking, open the computer, and then press the power button. 2. Angle the front of the computer downward. 3. Line up the visual alignment indicator on the computer with the indicator on the docking station.

  • 3–2 Reference Guide Using the Docking Station Installing the HP/Kensington Cable Lock ✎ Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. The HP/Kensington Cable Lock (purchased separately) allows you to secure the docking station and a docked computer. Install the cable lock into the integra

  • HP DC367B - Compaq Basic Port Replicator 1.2, 2–2 Reference Guide Docking and Undocking 1. Insert the AC adapter 1 into the power connector on the docking station. 2. Insert one end of the power cord 2 into the AC adapter. 3. Insert the other end of the power cord 3 into an AC outlet. ✎ The docking station requires AC power for full functionality of all ports. ✎ The light above the power connector is turned on when the docking station is connected to AC power.

Related Products and Documents (Docking Station):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 DICE Silverline iPod Kit Installation manual dice/silverline-ipod-kit-746.pdf 19 Oct 2022 36 1.99 Mb
2 ZUMEX essential Operation & user’s manual zumex/essential-XG9.pdf 16 Jan 2023 36
3 Comtrend Corporation MB-21IR Quick install manual comtrend-corporation/mb-21ir-62T.pdf 16 Jul 2023 4
4 Brother S-7000DD Instruction manual brother/s-7000dd-187.pdf 28 Nov 2023 52 1.39 Mb
5 Matrox RT.X2 Installation manual matrox/rt-x2-P33.pdf 03 Jun 2023 48
6 Philips TT2030 Operation & user’s manual philips/tt2030-ML8.pdf 26 Apr 2023 9

Similar Resources:

  • Dension

    ice-Link:Plus

    (4 pages)
    User’s Manual Ice>Link Plus V2.x Car intergration kit for iPod icelink_plus_user_manual_210 Introduction ice>Link Plus from Dension is a vehicle-specific kit that enables iPod control by emulating an external CD changer and connects directly to the back of the car radio (or entertainment control box) or to pre-wired f …
  • Philips

    DS-9800W

    (2 pages)
    WPS23 A3 A3 B3 A34B3 BWIFI SETUP2131WPS0’35”LEDLEDLEDLEDWPS0’45”+Network ConfigurationPhilips Fidelio AirPlayLEDLEDUK EUR192.168.1.1WI-FI SETUP WI-FI SETUPUKEURUSAUSADo not press any buttons, until the indicator blinking speed is slower.Press Wi-Fi SETUP, then the blinking alternates between red, green and yellow.Press and hold Wi-Fi SETUP, until the …
  • Havis

    DS-PAN-504

    (12 pages)
    Owner’s ManualHavis Docking StationFor Panasonic Toughpad FZ-A1DS-PAN-500-SERIES_OMN_8-13www.havis.com1-800-524-9900DS-PAN-504DS-PAN-505DS-PAN-506DS-PAN-500 SeriesHavis, Inc.75 Jacksonville Road, PO Box 2099Warminster, PA 1897447801 Anchor CourtPlymouth, MI 48170www.havis.com 1-800-524-9900 …
  • ASA Electronics

    versalogic VersaHIT Dual

    (4 pages)
    \ A.S.A. Plastici S.r.l | Via Buonarroti, 60 | 20090 Trezzano S/N (MI) Italy | P.IVA IT02526270158 Tel/Phone +39024455894 | Fax +39024450107 | Website: www.asaplastici.com | E-mail:[email protected] Documento Riservato – Vietata ogni riproduzione non autorizzata. All rights reserved. Any unauthorized reproduction is strictly prohibited. 1 Manuale &a …
  • Philips

    HTS7140

    (3 pages)
    PhilipsSoundbar Home theater with AmbisoundBlu-ray 3D playbackHTS7140Superior surround sound without the clutterObsessed with soundIndulge in cinema-like multi channel surround sound without speakers and wires all around you. Philips’ SoundBar with Ambisound incorporates a complete home theatre system, including high definition Blu-ray disc Playback in a …
  • SEON

    HDD Dock3

    (2 pages)
    HDD Dock3 Quick Start GuideCopyright © Safe Fleet July 2018 | All rights reserved | Part #: 700-1131 R2Product ComponentsThe HDD Dock product package contains the following components:• HDD Dock and recorder drive alignment plates (x3), labeled as follows:• A (TH4, TH6, TL and MX series)• B (TH8)• C (TX and DX series)Note: HX/NX recorder drives …

Comments, Questions and Opinions: