HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Operation & User’s Manual
|
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 2 Introducing HP Server Remote Management Card • The HP Server Remote Management Card web interface online help, which describes all aspects of the user interface including how to use the HP Server Remote Management Card to manage your network server. • pcAnywhere online documentation. The complete pcAnywhere User Guide is in Adobe Acrobat PDF format on the HP Netserver Navigator CD in the \util\pca32\xx\ subdirecory (where xx represents a two letter abbreviation for your local language). • The HP Server Remote Management Card README file located in the \ttrc2\us directory of the HP Netserver Na
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 6 Setting Up NT Graphics Console Redirection Using pcAnywhere NOTE You can configure the pcAnywhere host to wait for both a modem and LAN connection by checking both a COM port and TCP/IP in the host icon's "Properties." 7. From the Properties menu, click the Settings tab and check the "Launch with Windows" and "Run minimized" checkboxes. Click OK to return to the main program window. 8. If you want to rename the connection item you just created, r
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 2 Introducing HP Server Remote Management Card if, for example, there has been a critical hardware failure. If text remote control is enabled during server reboot, the actual bootup screens can be viewed at a remote site. Remote configuration. An administrator at a remote client can reconfigure the HP Server Remote Management Card and change features such as notification actions. An administrator can also change user and administrator permissions without having to be at the server. Man
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 3 Hardware Installation and Configuration 1. Locate the 50-pin connector on the HP Server Remote Management Card. Figure 3-1: Locating the 50-pin Connector 2. Plug the end of the 50-pin ribbon that is labeled “To Card” into the card’s connector. 3. If additional cable is needed, order HP Part Number P3537-63010. NOTE The ribbon cable is keyed to prevent incorrect cable connection. Installing the HP Server Remote Management Card in the Server Install the HP Server Remote Management Card into slot 6 on your server’s
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Appendix A Event Codes Pager Code Server Event Severity 02101 SCSI Duplex Board has been inserted INFORMATIONAL 02502 Cache Protocol and Parity error CRITICAL 02516 ACPI hardware failure WARNING 0274X Hot Swap Cage: SCSI Bus type has changed WARNING 0274X Hot Swap Cage: SCSI cable removed WARNING 0274X Hot Swap Cage: SCSI cable attached INFORMATIONAL 02840 Hot Swap Cage: SCSI terminator removed WARNING 02841 Hot Swap Cage: SCSI terminator attached INFORMATIONAL 03300 PCI Hot Plug fault deasserted INFORMATIONAL 03300 PCI Hot Plug fault asserted CRITICAL 03305 PCI Hot Plug powered on INFORMATI
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, 4 Setting Up the Remote Connection This chapter describes how to cable and configure the remote communications link to the HP Server Remote Management Card (LAN or modem). Once communications have been established, you may control your HP Server using the HP Server Remote Management Card web interface. NOTE If you have not provided for an independent communications link to the card (either via a dedicated LAN line or dial-up modem line), you will be unable to communicate with the HP Server Remote Management Car
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Appendix A Event Codes Pager Code Server Event Severity 21210 NetRAID: Logical drive consistency check operation aborted WARNING 21211 NetRAID: Logical drive inconsistencies found and corrected WARNING 21212 NetRAID: Logical drive consistency check operation failed CRITICAL 21213 NetRAID: Logical drive reconstruction started INFORMATIONAL 21214 NetRAID: Logical drive reconstruction completed INFORMATIONAL 21215 NetRAID: Logical drive reconstruction failed CRITICAL 21216 NetRAID: Ph
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 7 Troubleshooting I forgot my password and can no longer log into the card. If you are the HP Server Remote Management Card administrator and have forgotten your password, there is a special utility on the HP Netserver Navigator CD that will allow you to reset the HP Server Remote Management Card user database back to the factory defaults (Login=ADMIN, Password=ADMIN). CAUTION Note that resetting the HP Server Remote Management Card user database back to the factory defaults will erase all existing user account information. To reset the database, go to the server with the HP Server Remote Management Card. I
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Contents FCC Radio Frequency Emissions Statements ......................................... 102 Notice for Taiwan .......................................................................................... 103 DECLARATION OF CONFORMITY (US and EU)........................................ 104 Technical Support ......................................................................................... 105 U.S. and Canada ...................................................................................... 105 Europe....................................................................................................... 105 Other Countries...................................
I Installing the Visual Diagnostic Panel The Visual Diagnostic Panel The Visual Diagnostic Panel for your tc3100 or tc4100 HP Server provides a set of LEDS that are used for troubleshooting. It is a small, self-contained circuit board in a black plastic housing that snaps into a receptacle in the Server chassis. A label affixed to the housing identifies the LEDs, as shown in Figure I-1
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 7 Troubleshooting If your pager service generates repetitive tones when it answers, the HP Server Remote Management Card modem may interpret the tones as a busy signal and attempt to re-dial. To prevent this, change the X4 command in the modem initialization string to X0 (blind dialing). Can I use the HP Server Remote Management Card to page cellular phones using Short Message Service (SMS)? SMS (Short Message Service) enhances paging by providing the ability to send and receive short messages
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Appendix C Installing and Using TFTP which copies the new driver to the DOS partition. Finally, the administrator uses Text Remote Console to edit the NetWare startup.ncf file to point to the new driver. To remotely reboot and copy the new driver: 1. Insert a 1.44MB floppy disk in drive A and create a bootable diskette. This could be at a Windows 95, 98 or 2000 client, but to ensure that the diskette has enough room for all the files, use a system with MS-DOS 6.x. At a DOS prompt, enter the command: format a:/s The /s parameter instructs DOS to include the system on the disk, making the disk bootable. 2. Obtain the new driver (in this case AIC7870.dsk)
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, F Keyboard Layouts The HP Server Remote Management Card allows an administrator to select a keyboard layout that matches the server keyboard. With the proper keyboard layout, the HP Server Remote Management Card is able to correctly interpret keystrokes sent to the server keyboard. The HP Server Remote Management Card includes support for France, Italy, Germany, Spain, United Kingdom, and United States keyboards. The graphics below provide layouts for each of the keyboards supported by the HP Server Remote Management Card. If you are using an unsupported keyboard,
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 4 Setting Up the Remote Connection ◊ Click Advanced. Then add the following string in the "extra settings" field: x3&c0&d0 NOTE The dialback feature cannot function properly if you do not enter this string in the Extra Settings field as indicated. 3. Configure Dial-Up Networking by double-clicking the "My Computer" icon and then "Dial-Up Networking." NOTE If you wish to configure dialback with the HP Server Remote Management Card, you need to log in to the card first and
Appendix A Event Codes Pager Code Server Event Severity 21114 SCSI: Device has been recovered NORMAL 21115 SCSI: Device has changed INFORMATIONAL 21116 SCSI: Predictive failure condition detected CRITICAL 21117 SCSI: ASPI database has been cleared INFORMATIONAL 21118 SCSI: ASPI interface has crashed CRITICAL 21119 SCSI: Insufficient
Appendix H Software License, Warranty, Regulatory and Support for a period of ninety (90) days from the date of purchase. In the event the media prove to be defective during the warranty period, Customer's remedy shall be to return the media to HP for replacement. Should HP be unable to replace the media within a reasonable amount of time, Customer's alternate remedy shall be
3 Hardware Installation and Configuration This chapter provides instructions for installing the HP Server Remote Management Card in a server and setting up a hardware connection that permits remote management of the server. (See Chapter 4 for information on setting up the HP Server Remote Management Card management software.) Installation and configuration of the hard
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Appendix A Event Codes Pager Code Server Event Severity 21937 FCArray: automatic rebuild started. INFORMATIONAL 21938 FCArray: Manual rebuild started. INFORMATIONAL 21939 FCArray: Rebuild completed. INFORMATIONAL 21940 FCArray: Rebuild cancelled. INFORMATIONAL 21941 FCArray: Rebuild error. CRITICAL 21942 FCArray: Rebuild failed due to new physical device. CRITICAL 21943 FCArray: Rebuild failed due to logical device failure. CRITICAL 21944 FCArray: A logical device initialization started. INFORMATIONAL 21945 FCArray: A logical device initialization completed. INFORMATIONAL 21946 FCArray: A logical device initialization was c
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 5 Logging In and Using the HP Server Remote Management Card Web Interface 6. At the password prompt, enter the password that belongs to the administrator name. For your first login, the factory default password is ADMIN. NOTE The user ID and the access password for the HP Server Remote Management Card software are case sensitive. CAUTION To avoid a potential security breach allowing someone to log in using the defaults, your first task should be to set up an administrator for the card. Under Configuration|User, create a new
HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade, Chapter 4 Setting Up the Remote Connection 6. Click the "Server" tab to specify the dial-up server type, network protocols, and compression. Make sure your settings match the following figure. (If you have Windows 95, make sure you do not check the "Login to network" option.) Figure 4-9. Define the Dial-Up Server Type 29
HP FL863UT - Workstation - Z400 Processor Software installation
FL863UT - Workstation - Z400 |
HP Presario CQ3100 - Desktop PC Processor Limited warranty
Presario CQ3100 - Desktop PC |
HP C7769B Processor Service manual
C7769B |
HP LaserJet 9000 Processor System installation manual
LaserJet 9000 |
HP D7171A - NetServer - LPr Processor Reference
D7171A - NetServer - LPr |
HP Pavilion w1000 - Desktop PC Processor Technical specifications
Pavilion w1000 - Desktop PC |
HP P3410A - NetRAID 1M RAID Controller Processor Installation and configuration manual
P3410A - NetRAID 1M RAID Controller |
HP 166207-B21 - Smart Array 5302/32 RAID Controller Processor Reference manual
166207-B21 - Smart Array 5302/32 RAID Controller |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Studiomaster | DPA 2000 | Owner's manual | studiomaster/dpa-2000-268.pdf | 30 Nov 2022 | 24 | |
2 | Kuppersbusch | ekv6800.1m | Instruction manual | kuppersbusch/ekv68001m-969.pdf | 06 Feb 2023 | 35 | |
3 | VTech | Magic Wand Laptop | Operation & user’s manual | vtech/magic-wand-laptop-SL8.pdf | 13 Mar 2023 | 9 | 0.87 Mb |
4 | 3Com | 3106c - NBX Wireless VoIP Phone | Quick reference manual | 3com/3106c-nbx-wireless-voip-phone-7BP.pdf | 07 Mar 2023 | 2 | 0.07 Mb |
5 | Philips | AZ1021N | Specifications | philips/az1021n-7M5.pdf | 22 Jun 2023 | 2 | 0.43 Mb |
6 | Sharp | PN-H701 | Setup manual | sharp/pn-h701-6F7.pdf | 04 Feb 2024 | 12 |
HP
Errata Title & Document Type: 202A Low Frequency Function Generator Manual Part Number: N/A Revision Date: 1956 HP References in this Manual This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis businesses are now part of Agi …
202A(47 pages) |
Epson
Important Information forEPSON Stylus® RIP UsersPrinting with Macintosh®For optimal printing performance, check these settings before you print:❑ Make sure you set the Background Printing option to Background in the Adobe® PostScript™ 8.5.1 printer driver.In addition, open the File menu and select Preferences. Make sure Raster Spool Mode is turned off …
Stylus pro5k(98 pages) |
Aaeon
SubCompact Board G E N E - QM7 7 GENE-QM77 Intel® 3rd Generation CoreTM i7/i5 Mobile Processor 10/100/1000Base-TX Ethernet 2 USB3.0, 6 USB 2.0, 4 COM, 8-bit Digital I/O 2 SATA 6.0Gb/s (Optional RAID) 1 CFast™, 1 Mini Card, LPC GENE-QM77 Manual Rev.A 2nd Ed. Feb. 24, 2014
…
GENE-QM77(101 pages) |
Focus
OUTSTANDING FEATURES• Scales to popular native resolutions for monitors, projectors and plasma panels• Flexible inputs support composite, S-Video, YPrPb, RGB, 480/576p, DVI and SDI• DVI digital, RGB and component outputs• Infrared Remote,or front panel control choices• Backlit LCD status and on-screen display• 3:2 Pulldown detection and correctio …
CS-1(2 pages) |
EAW
PRELIMINARY DATAEASTERN ACOUSTIC WORKSOne Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email [email protected] • Web http://www.eaw.comEAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# 888xxx(A) MX8700/2 PP Feb2001 • Printed In USA SPECIFICATIONS MX8700D …
MX8700(2 pages) |
Intel
Document Number: 320503-001 Intel® CoreTM 2 Duo Processor and Intel® GS45 Express Chipset (with DDR3 System Memory) Development Kit User’s Manual September 2008
…
BX80580Q9400 - Core 2 Quad 2.66 GHz Processor(84 pages) |
KVMSwitchTech Media Converter SCA-VGA-DVIKVMSwitchTech Media Converter Operation & user’s manual (File: kvmswitchtech-sca-vga-dvi-operation-user-s-manual-4, Wednesday 15-11-2023) SCA-VGA-DVI, 4 |
Field Controls Air Cleaner UV-Aire Air Purifying System UV-500CManual for Field Controls UV-Aire Air Purifying System UV-500C Air Cleaner UV-Aire Air Purifying System UV-500C, 8 |
Grohe Plumbing Product MINTA TOUCH 30 218PDF User Manual (@U48AIG), Grohe MINTA TOUCH 30 218 Plumbing Product (Tuesday 26-12-2023) MINTA TOUCH 30 218, 12 |
Bajaj Auto Motorcycle DTS-i Discover 110 CBS#8UBO91: DTS-i Discover 110 CBS Motorcycle Owner's manual DTS-i Discover 110 CBS, 40 |
Optiquest Monitor Q2161WB - Optiquest - 21.6" LCD MonitorOptiquest Q2161WB - Optiquest - 21.6" LCD Monitor User Guide (Operation & user’s manual), @5HU126 Q2161WB - Optiquest - 21.6" LCD Monitor, 21 |
Monacor Car Receiver PA-1200RTPDF Manual (@G19YD5), Monacor PA-1200RT Car Receiver (Sunday 20-08-2023) PA-1200RT, 26 |
LED Strip Studio Dimmer MR. DIMMERLED Strip Studio MR. DIMMER User Guide (Manual ), @LX1I3T MR. DIMMER, 19 |
Friedrich Air Conditioner M12YG#362149 M12YG: Friedrich Air Conditioner Owner Documentation M12YG, 8 |
Draper Remote Control IntelliFlexIntelliFlex Installation instructions - E67VCG IntelliFlex, 2 |
Philips Telephone S8ATelephone Operation & user’s manual (Philips S8A) S8A, 56 |
Tunturi Fitness Equipment C80#H2XTE5: C80 Fitness Equipment Operation & user’s manual C80, 31 |
AEG Oven BN 8.23AEG Oven Operating instructions manual (File: aeg-bn-8-23-operating-instructions-manual-24, Thursday 07-12-2023) BN 8.23, 24 |