Manualios.com

Philips BDL6545AT/00 Operation & User’s Manual

  • BDL6545AT/00 Digital Signage
  • mae1hBqjMxAgQ
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 59

Philips BDL6545AT/00 Manual Online:

3.8, 1342 votes
Philips BDL6545AT/00 User Manual
Philips BDL6545AT/00 User Guide
Philips BDL6545AT/00 Online Manual

Text of Philips BDL6545AT/00 User Guide:

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS • Brightness - Select On and the brightness of the image will be reduced to an appropriate level, and the Brightness setting in the Picture menu will become unavailable. Use the PLUS/MINUS button to make selection. • Pixel shift - Select the time interval for the display to slightly expand the image size and shift the pixel position in four directions (up, down, left, and right). Use the PLUS/MINUS button to make selection (Off-900 seconds from current time). The default time interval is 300 seconds. This helps to alleviate the issues of ghost imaging. IMPORTANT: It is not recommended to keep a single static image

  • Philips BDL6545AT/00, User Manual BDL6545AT INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plu

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS Note: Windows is a registered trademark of Microsoft Corporation in the United States and other countries. 6% 94% 8% 5% 5% 8% 74% ± 4 mm ± 4 mm ± 5.5 mm ± 3 mm A B B C 16:9 aspect ratio (95% of touch area)

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 3.2.4. USING HDMI INPUT Connect the HDMI connector of the external device to the HDMI input of the display. 3.3. CONNECTING A PC 3.3.1. USING VGA INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA IN connector of the display. 2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display and connect to the corresponding PC connector. DVD/Blu-ray PC

  • Philips BDL6545AT/00, User Manual BDL6545AT REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declares under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN61000-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 2.2. REAR VIEW 1. ENTER/VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, this is also used as the SET button. 2. MENU button • Use this button to engage the On Screen Display menu. • When the On Screen Display menu is active, use this button to return to the previous menu. 3. / button • When the On Screen Display menu is active, use these as the UP/DOWN menu buttons. • Press and hold the  and  buttons simultaneously for 3 sec

  • User Manual BDL6545AT RETURN TO THE CONTENTS DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. • To move the sub-picture up in “PIP” mode. DOWN button • To move the highlight bar down to a

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 5.2.5. Configuration 1 MENU Switch on state Set the display to turn on or remain off when the power cord is connected to a wall outlet. Use the UP/DOWN button to toggle between • Last status - The display will return to the previous power status (on/off/standby) when removing and replacing the power cord. • Forced on - The display will turn on when the power cord is connected to a wall outlet. • Power off - The display will remain off when the power cord is connecte

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 5.2. OSD MENU OVERVIEW 5.2.1. Picture MENU Brightness Note: This function is not available when Smart contrast, Light sensor or Brightness under Panel saving is turned on. Disable these functions to access Brightness from the OSD menu. Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. Use the PLUS/MINUS button to adjust. Contrast Adjust to change image contrast. The black portions of the picture become richer and the whites become brighter. Use the PLUS/MINUS button to adjust. Sharpness Adjust to i

  • Philips BDL6545AT/00, User Manual BDL6545AT Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. Read and follow these instructions when connecting and using your LCD display: Consult a service technician if the display does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. • Unplug the display if you are not going to use it for an extensive p

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 3.3.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the display. 2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display and connect to the corresponding PC connector. 3.3.3. USING HDMI INPUT 1. Connect the HDMI connector of the PC to the HDMI connector of the display using an HDMI cable. 3.3.4. USING a DVI-D OUT to HDMI IN Connection 1. Connect the DVI connector of the PC to the HDMI connector of the display using a DVI-HDMI cable. PC PC

  • User Manual BDL6545AT RETURN TO THE CONTENTS For Windows Vista and Windows 7 Selection Drag one finger left or right. Pan up / Pan down / Back / Forward Quickly drag your finger (Flick) in a desired direction. Multi-touch functions For Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions Right-click 1. Press on the target. 2. Tap the screen with another

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 5.2.7. Advanced option MENU Input resolution Note: For VGA input only. Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. Use the UP/DOWN button to toggle between Black level expansion Note: For Video, S-Video, Component, and HDMI (video mode) inputs only. This feature offers deeper blacks for an even better image quality. Select a suitable black level expansion setting to reveal more details in the dark parts of an image. Use the UP/DOWN butto

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 9. TECHNICAL SPECIFICATIONS Display Input Terminals Output Terminals Item Specifications Screen Size (Active Area) 65” LCD (164 cm) Viewable size 1428.4 (H) x 803.5 (V) mm/56.2 (H) x 31.6 (V) inch Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.744 (H) x 0.744 (V) mm Displayable colors 1.07B colors Brightness (typical) 500 cd/m 2 Smart Contrast 13000:1 Contrast ratio (typical) 5000:1 Viewing angle 178 degrees Response time Typ. 8 msec Color gamut 72% Frequency Ho

  • User Manual BDL6545AT RETURN TO THE CONTENTS ( : PIP function available, : PIP function unavailable) • The availability of the PIP function will also depend on the resolution of the input signal being used. Sub picture signal source Video S-Video Component VGA DVI-D HDMI OPS

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 1. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control. • Detects the ambient lighting conditions around the display. • Indicates the operating status of the display: - lights green when the display is turned on - lights red when the display is in standby mode - blinks red when the display enters DPMS mode - off when the main power of the display is turned off 1

  • Philips BDL6545AT/00, 6. INPUT MODE VGA Resolution SDTV Resolution HDTV Resolution • The PC text quality is optimum in HD 1080 mode (1920 x 1080, 60Hz). • Your PC monitor screen may appear differently depending on the manufacture (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a display. Standard Resolution Active Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for Mode H Pixels V Lines VGA 640 480 60 Hz 25.175 MHz 4:3 Video Graphic Array72 Hz 31.5 MHz 75 Hz 31.5 MHz WVGA 720 400 70 Hz 33.75 MHz 16:9 Wide

  • Philips BDL6545AT/00, User Manual BDL6545AT 中国电子信息产品污染控制表示要求 ( 中国 RoHS 法规标示要求 ) 产品中有毒有害物质或元素 的名称及含量 O:表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 环保使用期限 此标识指期限 ( 十年 ),电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄或突变, 电子信息产品用户使用该

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS Zoom Move two fingers apart or toward each other. Supported by specific applications • Move two fingers in opposing directions. • Use one finger to pivot around another. Supported by specific applications Tap two fingers simultaneously. The target should be the midpoint between the fingers. For Windows XP, Windows Vista and Windows 7 Wakeup from Windows sleep mode (S3) Press and hold for 4 seconds. OS functions Gesture actions

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS Audio reset Reset all settings in the Audio menu. Use the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu. • Audio 3 • HDMI

  • Philips BDL6545AT/00, User Manual BDL6545AT RETURN TO THE CONTENTS • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If this happens, press the INPUT button to enter the video mode. Also, make sure that the PC is connected. • When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections. • The display settings table complies to the IBM/VESA standards, and based on the analog input.

  • User Manual BDL6545AT TABLE OF CONTENTS 1. UNPACKING AND INSTALLATION 1.1. UNPACKING 1.2. PACKAGE CONTENTS 1.3. INSTALLATION NOTES 1.4. MOUNTING THE DISPLAY 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 2.2. REAR VIEW 2.3. INPUT/OUTPUT TERMINALS 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS 2.4.2. INSERTING THE BATTERIES IN THE REMOTE

Related Products and Documents (Digital Signage):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Eclipse EGA2 Combustion Instruction manual eclipse/ega2-combustion-T7Q.pdf 15 Oct 2022 48
2 SWRSound WorkingPro Series Owner's manual swrsound/workingpro-series-5JG.pdf 04 Jul 2023 6
3 Altec Lansing 9475A Operating instructions manual altec-lansing/9475a-2NV.pdf 16 Mar 2024 6
4 Philips 4511 series Operation & user’s manual philips/4511-series-JXX.pdf 07 May 2023 10
5 D-Link DI-804V Brochure & specs d-link/di-804v-4T7.pdf 27 Jul 2023 4 0.31 Mb
6 Bionaire SMARTTOUCH BCM7204 Instruction leaflet bionaire/smarttouch-bcm7204-2F3.pdf 21 Dec 2022 2 0.97 Mb

Similar Resources:

  • Displays2go

    IPMEDWH129

    (2 pages)
    REV. 09/20 1 of 2ASSEMBLY INSTRUCTIONSRolling Medical Tablet Kiosk with HandlePARTS:Assemble the wire basket (IPDMEDBS, sold separately)Assemble the base with the pole using …
  • LG

    65UH5PC

    (31 pages)
    Bi-Search International Incwww.bisearch.comOWNER’S MANUALDigital Signage(MONITOR SIGNAGE)Please read this manual carefully before operating your set and retain it for future reference.65UH5PC …
  • Nexcom

    NDiS 120

    (39 pages)
    NEXCOM International Co., Ltd.Published January 2009www.nexcom.comNEXCOM International Co., Ltd.Multi-Media SolutionsDigital Signage Platform NDiS 120User Manual …
  • ViewSonic

    EP5202

    (2 pages)
    EP5202VERSATILE VIDEO52" DIGITAL SIGN BOARDViewSonic’s new ePoster products make it easy to replace those old backlit printed signs with new impactful video messaging on  …
  • Elo TouchSystems

    I-Series

    (2 pages)
    Revision CP/N E247518www.elotouch.comQuick Installation GuideI-Series 4 Android All-In-One © 2021 Elo Touch Solutions, Inc. All rights reserved.The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties with respect to the contents herei …
  • LG

    43SH7E

    (6 pages)
    LG Digital Signage(MONITOR SIGNAGE)43SH7E 49SH7E 55SH7E32SM5E 43SM5E 49SM5E 55SM5E32SM5KE 43SM5KE 49SM5KE 55SM5KEAAA(M3 x L6) Depending upon countryP/No. : MFL69446197 (1808-REV00)(Image may very depending on model)UnpackingCheck your product box for the following items. If there are any missing accessories, contact thelocal dealer where you purchased your p …

Comments, Questions and Opinions: