Manualios.com

VisionQuest PVQ42VGB Operation & User’s Manual

VisionQuest PVQ42VGB Manual Online:

3.9, 1675 votes
VisionQuest PVQ42VGB User Manual
VisionQuest PVQ42VGB User Guide
VisionQuest PVQ42VGB Online Manual

Text of VisionQuest PVQ42VGB User Guide:

  • VisionQuest PVQ42VGB, 4 SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number Serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service.

  • 28 Feature menu options in Component Press MENU on the front panel or on the remote control and then use Ÿ/ź and Ź/ENTER to select the Feature menu in YpbPr mode. Component Set Press Ż/Ź button and then use ENTER to enter the Component set menu as below: Feature menu options in HDMI Press MENU on the front panel or on the remote control and then use Ÿ/ź and Ź/ENTER to select the Fe

  • VisionQuest PVQ42VGB, 25 Advanced Video Menu Press OK to enter the advanced video menu as below: Password Set Press ENTER button to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the password when you input the new one twice. Parental Control Press ENTER to enter the sub-menu and then use the 0-9 to enter the correct password. NTSC CC Press ENTER to select CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/TEXT4 ATSC CC Press ENTER to select CS1/CS2/CS3/CS4/CS5/CS6. - Noise Reduction--Spatial: pressŻ/Ź to select on or off. - Noise Reduction--Speckle: press

  • VisionQuest PVQ42VGB, 11 External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. VCR connection To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the VCR's output jacks to the TV input jack

  • 32 Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if

  • VisionQuest PVQ42VGB, 19 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE 3. You can cancel this function by pressing MUTE or VOL+/ VOL-. - Press the MENU button to display the main menu. - Use Ÿ/ź/Ź/Ż buttons to select and adjust the available menus. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.

  • VisionQuest PVQ42VGB, 12 External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the INPUT button on the remote control. 2. Press the / button to select the desired source. 3. Press the OK button to confirm. 4. Operate the corresponding external equipment. DV

  • 29 Sleep Timer Press Ż/Ź button to select the amount of time before your TV turn off automatically and press the ENTER that can select the 30 min/60min/90min and OFF. Advance Video Menu Press ENTER to enter the advance video menu. Feature menu options in S-Video and Composite Rear Press MENU on the front panel or on the remote control and then use Ÿ/ź and ENT

  • VisionQuest PVQ42VGB, 20 1. Using the CH+/CH- on the front panel or on the remote control. z Press CH+ to increase channel number. z Press CH - to decrease channel number. 2. Using 0-9 digital buttons and - button You can select the channel number by pressing 0 to 9 and pressing ENTER to confirm you selection. Press the - button to enter a program number for multiple program channel. 3. Example: z To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button. z To select 2-digit channel (e.g. Channel 2

  • VisionQuest PVQ42VGB, 22 Audio Mode You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND menu. Press ENTER button to select one of the audio mode such as User/Voice/Concert/Jazz. Also,you may select the it directlyby pressing the SMODE button on the remote control. Only you select User, the Bass /Treble are operable. Audio Language Press Ż/Ź to select one of the audio language such as English/ French and Spain, but the condition is that the program system has included the language code,or else,this item isn’t available, and you can’t select it. Bass Press Ÿ/ź button and then use Ż/Ź to increase or decrease the level of th

  • 27 VGA Set Press Ÿ/ź button and then use ENTER to enter the VGA set menu as below: H-Pos Press Ÿ/ź button and then use Ż/Ź

  • VisionQuest PVQ42VGB, 14 HDMI When the source device(DVD player or Set Top Box) supports HDMI How To Connect 1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product). 2. No separated audio connection is necessary. How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p. Select HDMI input source in input source option of Select Main s

  • VisionQuest PVQ42VGB, 31 Product Specification Items Relevant illustrations Screen size, visible 42 PLASMA TV Screen format 16:9 Display area 933.89΀ wide and 532.22΀ high Resolution 1024(H) × 768(V) pixels Maximum contrast ratio 10,000:1 Maximum brightness 1,500 cd/m² Display colors 16.7M Maximum viewing angle 160° (Horizontal) / 160° (Vertical) Maximum response time / Maximum lifetime of background light 70,000 hours Dimension (packed) 1155*390*880mm Weight (net) Appro109.17LB include power supply. Accessories Remote-Control, Power cord, Component Cable, User Guide, Quick Set up Guide, Warranty Card Power req

  • VisionQuest PVQ42VGB, 7 Connection options Back panel controls 1 YPbPr 1-Left Audio In 11 YPbPr 2-Y in 2 YPbPr 2-Left Audio In 12 YPbPr 2-Pb In 3 CVBS & S-Video Left Audio In 13 YPbPr 2- Pr In 4 YPbPr 1-Y in 14 PC- Audio In 5 YPbPr 1-Pb In 15 PC-RGB In 6 YPbPr 1- Pr In 16 HDMI 1 In 7 CVBS In 17 HDMI 2 In 8 YPbPr 1-Right Audio In 18 S-Video In 9 YPbPr 2-Right Audio In 19 Coaxial output terminal 10 CVBS & S-Video Right Audio In 20 TV signal In 1 3 4 5 762 8 12 13 16 17 18 19 20 14 159 10 11

  • VisionQuest PVQ42VGB, 13 DTV connection HDMI This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital How to connect Use the TV`s COMPONENT , PC or HDMI/DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 2. Use INPUT on the remote control to select COMPONENT, PC or HDMI/DVI source

  • VisionQuest PVQ42VGB, 17 Operation In the manual, the OSD ( on screen display ) may be different from your TV’s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. Read the instruction that follow. Switching On/Off the TV set 1. First, connect power cord correctly. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished using the TV,press the POWER button on the remote control. The TV reverts to standby mode. 4. If you intend to be away on vacation, disconnect the power plug from the wall power outlet. Note If the TV in power on, the scre

  • VisionQuest PVQ42VGB, 3 IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifie

  • VisionQuest PVQ42VGB, 2 WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Operator Safety has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instruction before starting the operation. The User Manual uses the following symbols to ensure a safe operation and prevent any damage to operators’ r properties:

  • VisionQuest PVQ42VGB, 8 Universal Remote Control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote control sensor on the TV. Fonctions introduction 1 POWER Press toturn on and off the TV 2 MUTE Switches the sound on or off. 3 Numeric buttons Press to change the channel. 4 - Button Press to select additional channels (digital) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”. 5 Tv mode recall 6 MTS Mono”,”Stereo”and “Sap�

  • 30 Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and

  • VisionQuest PVQ42VGB, 5 Contents Warning…………………………….. …………………………....……………….……………....……………………………..…………2 Important Safety Instructions ……………………………..……………………...………..…………………………….. ………………3 Save These Instructions…………………………….. …………………………..….. …………………………………………….. ……4 Controls …………………………….. …………………………….. …………….……………………………….. ………

  • VisionQuest PVQ42VGB, 21 Press the MENU on the front panel or on the remote control and then use Ż/Ź and Ź /ENTER to select the Picture menu. Picture Mode Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu. Press ENTER button to select the picture mode such as User/Standard/Vivid/Bright. Besides, you may change it directly by pressing the PMODE button on the remote control. Only you select User, the ontrast/Brightness/Sharpness/Color are operable. Contrast Press Ÿ/ź- button and then use Ż/�

  • VisionQuest PVQ42VGB, 24 Manual Language Press ENTER key to select language of the OSD such as English/ French and Espanol. Reset Press ENTER to return to the default set. Feature menu options Press MENU on the front panel or on the remote control and then use Ż/Ź and ENTER to select the Feature menu. Time Set Press Ÿ/ź button and then use Ź/ENTER button, the time set menu as below that allows you to set the time the TV will display. Only Valid at DTV channel. Time Set Mode You can select one of auto and manual to set the time.When selected auto, the item of year/date and time will

  • VisionQuest PVQ42VGB, 10 Antenna Connection Generally speaking, to enjoy a clearer picture,we recommand that you use a CATV system or an outdoor antenna. Over-the-air TV reception quality will depend on your antenna type,antenna location and antenna positioning. Connexions de l'équipement externe Quick set-up Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket Bronze Wire RF Coaxial Wire (75 VHF Antenna UHF Antenna Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Outdoor Antenna Turn clockwise to tighten Bronze Wire Be careful n

  • VisionQuest PVQ42VGB, 16 Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. Note  Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only.  If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user`s responsibility to have an electrician replace the obsolete outlet.  If you cause a static di

Related Products and Documents (LCD TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Baumatic B46SS Instruction manual baumatic/b46ss-J83.pdf 16 Oct 2022 32 0.62 Mb
2 Xerox Phaser 6360 Operation & user’s manual xerox/phaser-6360-27V.pdf 10 Aug 2022 128 2.17 Mb
3 Keys Fitness KPS-1800 Specification sheet keys-fitness/kps-1800-F22.pdf 21 Mar 2024 1
4 Melissa 646-059 Specifications melissa/646-059-2DI.pdf 06 Aug 2023 1
5 AEG COMPETENCE B 6139-m User instructions aeg/competence-b-6139-m-EG9.pdf 04 Sep 2022 60 0.65 Mb
6 MABIS 04-255-001 Manual book mabis/04-255-001-94Q.pdf 25 Nov 2023 28

Similar Resources:

  • HANNspree

    ST35-15U1

    (1 pages)
    Quick Start GuideFront ViewRear View1. Connect the power cord to the power adapter as illustrated. 2. Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV.3. Insert the three-pronged plug at the other end of the power cord into a power outlet.1. The illustration presented here shows you how to conn …
  • Philips

    17PF9945

    (2 pages)
    17PF994517PF9945Flat Television 17" High Definition Picture (2.9 Million Pixels) – 1080i/720P/480p•Progressive scan for sharper images• Active Control™• FM Radio• NTSC tuner built-in•High Brightness (450 nits)•High Resolution : 1280 x 768• High Contrast (400:1)• DCDi by Faroudja• 3:2 Reverse Pull-down• Virtual Dolby®Surround Sou …
  • Samsung

    6001

    (2 pages)
    I I II Figuresandillustrationsinthb UserManualareprovidedfor referenceonly and maydifferfrom actualproduct appearance.Productdesignandspedficationsmaybe changedwithoatnotbe.Important Warranty Information RegardingTelevision Format Viewing'z See the warranty card for more information on warrantyterms.Wide screen format LED Displays (16:9, the aspect rati …
  • Sharp

    Aquos LC-52SE94U

    (138 pages)
    SERVICE MANUALParts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining thesafety and performance of the set.This document has been published to be used forafter sales service only.The contents are subject to change without notice.OUTLINEOUTLINE.................... …
  • Sony

    KF-E42A10

    (184 pages)
    LCD PROJECTION TELEVISION SERVICE MANUAL MIX5-AGA CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION 9-965-991-01KF-E42A10 RM-YA003 CND/MEXICO KF-E50A10 RM-YA003 CND/MEXICO HISTORY INFORMATION FOR THE FOLLOWING MANUAL:ORIGINAL MANUAL ISSUE DATE: 11/2005 REVISION DATE SUBJECT 11/2005 No revisions or updates are applicable at this time. …
  • Sony

    BRAVIA XBR-65A9G

    (52 pages)
    4-748-690-12(1)TelevisionTéléviseurReference GuideUSManuel de référenceFRSony Customer SupportU.S.A.:http://www.sony.com/tvsupportCanada:http://www.sony.ca/supportUnited States Canada1.800.222.SONY 1.877.899.SONYPlease Do Not Return the Product to the StoreService à la clientèle SonyCanada :http://www.sony.ca/supportÉtats-Unis :http://www.sony.com/tv …

Comments, Questions and Opinions: