Soundstream VR-730 Owner's Manual

Text of Soundstream VR-730 User Guide:

• Soundstream VR-730, 24 TROUBLESHOOTING SYMPTOM CAUSE SOLUTION NO POWER THE CAR IGNITION IS NOT ON. IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”. THE FUSE IS BLOWN. REPLACE THE FUSE. DISC CANNOT BE LOADED. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. DISC CANNOT BE READ. INSERTING THE DISC IN UPSIDE DOWN. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. COMPACT DISC IS EXTREMELY DIRTY OR DEFECTIVE. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. TEMPERATURE INSIDE THE CAR IS TOO HIGH.

• Soundstream VR-730, 12 26. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO. Go to: in DVD mode，press and hold for 2 seconds to show TIME SEARCH menu, select number and confirm to go to certain position directly. When press button to enter TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or CHAPTER position directly. 27. DUAL button (Option without function) 28. OPEN/TILT button (Option without function) REMOVE BATTERY Note:  The distance

• Soundstream VR-730, 4 Accessories Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap 1 (3) Bolt 1 (4) Screw4*6 4 (5) Mounting Collar 2 (6) Release Key 2 (7) Screw 5*20 1 Note: Product image may vary from the actual delivery. Warranty card User Manual Remote Control Speaker cable Power cable 1x AV-IN Cable Trim ring 1 Trim ring 2

• Soundstream VR-730, 5 INSTALLATION / UN-INSTALLATION Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.  INSTALLATION （Figure 1）  Insert Half Sleeve into dash-board hole and bend mount tabs outwards to fix it  I

• Soundstream VR-730, 11 9. / seek- buttons In DVD mode, Press button to skip to the previous track. Press and hold button for two seconds to activate fast reverse (REW) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching. button Frequency down. 10. LOUD button Press to set LOUD on or OFF. 11. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (HUE / SATURATION / COLOR RESET / BRIGHT / CONTRAST / SHARP / BACK) 12. STOP/PBC but

• VR-730/ VR-730T In-Dash 7 ” Monitor Touch Screen DVD/CD/MP3/MP4 AM/FM Radio Built-in TV tuner Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.

• Soundstream VR-730, 21  System Select this menu item is to set TV system: SECAM => NTSC =>PAL, press NTER button on the remote or tap the screen to select.  Audio Select this menu item is to set the TV sound system: When system setting PAL, press ENTER on remote or tap the screen button to select TV sound system: D/K=>M/N=> B/G=> I. When system setting SECAM, TV sound system B/G=>I=>D/K. When system setting NTSC, press button to automatic skip TV channel term. Channel

• Soundstream VR-730, 16 ◆TV Mode To start TV Mode, tap on TV button from main menu screen. ◆AV-IN Mode To start AV-IN Mode, tap on AV-IN button from main menu screen. Note: If there is no external video input, the TFT displays “NO SIGNAL” Press the icon to be back to main menu. ◆SETTING CONTROL Your device has default system settings. You can customize the settings to suit your personal needs. Once you change settings, your new settings will remain until you change it again. To start SETTING, tap it on main menu screen. SOUND CONTROL Tap SOUND button to show SOUND 1 menu.. Tap button to show SOUND 2 menu. EQUALIZER Select EQ mode

• Soundstream VR-730, 23 TROUBLESHOOTING Symptom Cause Remedy General Power does not turn on. (No sound is produced.) Fuse is blown Replace with fuse of the same amperage. If the fuse blows again, consult your store of purchase In correct wiring Consult your local retailer. No sound output when operating the unit with amplifiers or power antenna attached. Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check

• 22 NOTES ON DISC  Only use groundless loudspeakers.  Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes.  Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.  Do not use 3-cable loudspeakers and do not connect the loudspe

• Soundstream VR-730, 7 Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at higher volumes. - Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. - Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body (GND). The unit is using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram. - Loudspeaker cables and/or optiona

• Soundstream VR-730, 17 DISPLAY CONTROL Tap DISPLAY button to show DISPLAY menu. RADIO CONTROL Tap RADIO button to show RADIO menu. GENERAL CONTROL Tap GENERAL Button to show GENERAL menu. DVD SET UP MENU During the DVD playback, press the SETUP button to enter into the system settings main menu; press the up or down arrow buttons to move to the highlighted menu item and select one of the Setup Pages: SCREEN Screen setting 16:9, 4:3,FULL Backlight Backlight setting LOW, MID, HIGH CLOCK DISPLAY Set CLOCK DISPLAY ON or OFF. CLOCK HOUR Set 24 Hour format or 12Hour format

• 3 CONTENTS WARNING! ................................................................................................................ 2 OPERATION PRECAUTIONS .................................................................................. 2 Accessories ............................................................................................................... 4 INSTALLATION

• Soundstream VR-730, 25 TECHNICAL SPECIFICATIONS General Power supply: 11~16V DC Current consumption: max. 15 A Maximum power output: 52W x 4 channels (max) Compatible formats: DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture CDCD-R/-RW/DVD±R/±RW playback Dimensions (W x D x H) / weight: 165*178*50 mm/2 kg Working temperature range: -10℃ - +60℃ ESP function: 10 sec. for Audio CD, 120 sec. for MP3 TFT display Screen size: 7 inch Resolution: 480*243 dot Aspect ratio: 4:3/16:9 Brightness: 400 cd/m2 FM Stereo Radio Frequency range(EUROPE AREA): 87.5 – 108MHz(Step 50KHz) Frequency range(SOUTH AMERICA AREA) 87.5 – 108

• Soundstream VR-730, 19 [7] NTSC/ PAL: Select this menu item to set up your preferred video output format. PAL is commonly used in Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used. [8] DEFAULT: Factory reset. Set all values to Factory default values including memory and preset stations. SYSTEM INFORMATION Press SYSTEM button to show the information of the system. You can view detail system information including serial number of the software. CALIBRATION The calibration of the screen is useful when some malfunction occur with the touch screen and it needs adjustment.

• Soundstream VR-730, 13 MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the corresponding icons to enter a desired mode. ◆ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Mute the sound Touch this button can choose FM1, FM2, FM3, AM1, AM2. Touch this button can scan the statio

• Soundstream VR-730, 6 WIRING CONNECTIONS NOTE: Never connect cable to the system while it is connected to the battery power. Whenever the unit is disconnected from the battery, the preset memory will be erased and the unit will go back to its factory defaults. Note: To watch video the parking wire should be connected to break signal. 2 cables is connected to a Hands-Free device (not included). Parking wire Note: The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car.

• Soundstream VR-730, 20 TV SECTION (For VR-730T only) Connect a TV antenna to the TV antenna jack of the unit. Select TV mode; press on the center of the touch screen, and following interface will be display: 1. In TV mode, press the Play/Pause buttons on remote once to enter TV menu setting, or press touch-screen to choose TV MENU icon to enter TV MENU. 2. Press the / on remote or tap the screen to select one of the setup pages: Auto program => Manual program. 3. Press the ENTER button on remote or tap “Auto program or Manual program” on screen to en

• Soundstream VR-730, 14 Touch this button to select reception of local station or DX for distance station. ◆ DVD PLAYER To start DVD Player, tap on DVD button from main menu screen. TOUCH SCREEN MENU You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT screen. Tap the screen again to hide the buttons. Insert DVD disc insert VCD disc NOTE 1. DVD Player will automatically start playing when you insert any DVD disc, MEMORY card or USB device. 2. Warning displays if the vehicle is moving for driver's safety. 3. DVD Player will not only play video,

Related Products and Documents (Car Video System):

Comparable Devices:

Similar Resources:

• Dometic PerfectView MC 402 (196 pages) MC 402MoniceiverQuick-start guide . . . . . . . . . . . . . . . . . . . . . .3MoniceiverSchnellstartanleitung. . . . . . . . . . . . . . . . . . 15MoniceiverGuide de démarrage rapide . . . . . . . . . . . .27MoniceiverGuía de inicio rápida . . . . . . . . . . . . . . . . . .39Monitor multimédiaGuia de início rápido . . . . . . . . . . . . . . . . . . 5 …

• Lilliput 668GL-70NP/H/Y (30 pages) The copyright belongs to InnoLux. Any unauthorized use is prohibited. INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TN84 V. …

• NavLinkz r.LiNK CI-RL4-SY3 (29 pages) Version 26.01.2022 HW: CAM(100)/(V20/Y+V41) CI-RL4-SY3 Video-inserter CI-RL4-SY3 Compatible with Ford vehicles with Sync3 full version with APIM 7inch or 8inch, tablet or non-tablet monitor. Video-inserter for front- and rear-view camera and two additional video sources Product features  Video-inserter for factory-infotainment sys …

• Samsung 320MX-3 (149 pages) SyncMaster 320MX-3, 320MXn-3 320MP-3, 320MPn-3LCD DisplayUser ManualThe color and the appearance may differ depend-ing on the product, and the specifications are sub-ject to change without prior notice to improve theperformance. …

• Jensen VM9214 (12 pages) 1VM9214VM9214 Head UnitSingle DIN SleeveWiring HarnessParking Brake Sensor Extension WireMounting HardwareCosmetic Trim RingRemote Control with Battery3.5mm to 3.5mm Media Adaptor CableOwners ManualInstallation GuideWhat’s in the BoxYou will need these tools and supplies to install your VM9214:• Torx type, fl at-head and Philips screwdrivers• Wire cu …

• Sony XS-GTX1642 (1 pages) Speaker Type6 1/2" 4-way speakerSpeaker ConstructionHOP+Aramid ber woofer cone, balanced dome PEI mid-range and PEI tweetersHigh energy magnetsFerrite / Neodymium magnetsCrossover typeIn-line crossoverPower handling350 Watts Max Power (60 Watts Rated)Specications© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part wi …

Comments, Questions and Opinions: