Philips VR150/58 Operation & User’s Manual

Text of Philips VR150/58 User Guide:

• Philips VR150/58, This video recorder is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable adapter. We hope you enjoy your new video recorder. EN Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated and easy- to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding operation. The video recorder should not be turned on immediately after transportation

• Philips VR150/58, 2 EN 1. Description of controls 1 2 3 4 5 6 7 8 9 0 STILL STOP MENU REW FWD PLAYSTATUS/EXIT CLEAR REC STANDBY/ON TV-PROG.TV-VOL MUTE SYSTEM PP STANDBY/ON PROGRAMME RECORD STOP/EJECT REW. PLAY FWD. RF OUT TV AERIAL The remote control Buttons for VCR feature only To record the TV channel selected at this moment. To switch off or on, interrupt menu function. Press to select channels at VCR. To select the programme number. During playback, press to adjust the tracking. To access or remove the VCR’s on- screen status display. To exit on-screen menus. To delete last entry. To clear a programmed recording (TIMER). To reset the elapsed time co

• Philips VR150/58, 3 EN 2. Important notes for operation Navigation in the screen menu You can check/change many functions and set- tings of your video recorder via the on-screen menu. The individual functions are selected, via the remote control as follows: Call up the menu: with . To select: with . To enter or change your selection: with the number buttons or with . To save or confirm: with . To cancel: with . To end: with . The symbols on your video recorder display These symbols can light up on your video recorder display: When you keep your video recorder on. When you have put a cassette in the video recorder. Display of programme

• Philips VR150/58, Preparing the remote control for operation The remote control and its batteries are packed separately in the original video recorder packag- ing. You must install the batteries in the remote control before use. 1. 1.Take the remote control and the enclosed batteries (2 batteries). 2. 2.Open the remote control's battery compart- ment and place the batteries in it as shown in the picture and close the battery compart- ment. The remote control is now ready to use. Its range is approximately 7 metres. Connecting your video recorder to the TV The necessary cable connec- tions must be made before you can record or playback TV programmes

• Philips VR150/58, EN 6. 6.If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, you will see the following picture: Then, read the section 'Preparation for use' in the chapter 'Installing your video recorder'. Connecting without a scart cable Have an aerial cable (supplied) ready. 1. 1.Switch off your TV. 2. 2.Remove the aerial cable plug from the aerial input socket of the TV. Insert it into the AERIAL at the back of the video recorder. 3. 3.Insert one end of the supplied aeria

• Philips VR150/58, Preparation for use This chapter shows you how to prepare the video recorder for use. The video recorder automatically seeks out and stores all available TV channels. 1. 1.Select the desired language for the on-screen menu by pressing or . 2. 2.Press . 3. 3.Confirm with . The automatic TV channel search starts. 4. 4.The clock setting display appears on the TV screen. 5. 5.Set the time with the number buttons . 6. 6.Set 'DAY', 'MONTH' and 'YEAR' with the number buttons . 7. 7.When all information is correct, save by pre

• Philips VR150/58, Automatic Tuning During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are re-installing the video recorder, e.g. after moving house, you can start this procedure again. This will replace all the TV channels already saved with the new ones. 1. 1.Switch on the TV. If required, select the pro- gramme number for the video recorder. 2. 2.Press . The main menu will appear. 3. 3. Select 'TUNER SET UP' with or and confirm with . 4. 4.Select 'AUTO TUNING' with or an

• Philips VR150/58, EN Setting the language You can change the language for the TV screen menu. However, the video recorder display will only display English text regardless of this set- ting. 1. 1.Switch on the TV. If required, select the pro- gramme number for the video recorder. 2. 2.Press . The main menu will appear. 3. 3.Select 'INITIAL SET UP' with or and confirm with . 4. 4.Select 'LANGUAGE' with or and confirm with . 5. 5.Select the desired language with or . 6. 6.To end, press . Setting the clock If the display shows an incorrect time or &ap

• Philips VR150/58, Playing back cassettes You can operate the video recorder using the remote control or the buttons on the front of the video recorder. If you press , , or while the set is in Stand-by, the power will be automatically turned on. Additionally, if a cassette was already inserted, the corresponding operation will be performed. Your video recorder can only record and play back standard VHS cassettes. 1. 1.Put a cassette into the cassette slot. The cas- sette is inserted automatically. ' ' will appear on the display. 2. 2.Press to view the tape. 'PLAY&a

• General information Use 'Manual Recording' to make a sponta- neous recording (for example, a programme cur- rently being shown). If you want to start and stop a recording manual- ly, read the section 'Recording without auto- matic switch-off' . If you want to start a recording manually but have it stopped automatically, read the section 'Recor

• Philips VR150/58, General information Use a TIMER programming to automatically start and stop a recording at a later time or date. The video recorder will switch to the right programme number and begin recording at the correct time. With this video recorder, you can pre-programme up to eight recordings within a period of one year. To make a programmed recording, your video recorder needs to know: * the date you want to make the recording * the programme number of the TV channel * the start and stop time of the recording This information is saved in a 'TIMER' block. Programming a recording 1. 1.Switch on the TV. If required, select the pro- gramme number

• Philips VR150/58, How to change a programmed recording (TIMER) 1. 1.Switch on the TV. If required, select the pro- gramme number for the video recorder. 2. 2.Press . The main menu will appear. 3. 3.Select 'TIMER' with or . Then press . 4. 4.Select ONCE, DAILY, or WEEKLY recording with or . Then press . 5. 5.Select a TIMER block with . (The flashing number indicates an empty TIMER block.) 6. 6.Press to delete information and input correct information with . 7. 7.To end, press . 8. 8.Switch off with . Problems and solutions for pro- grammed recordings STANDBY/ON yy STAT

• EN 8. Other Functions Changing the video (colour) system If you playback recordings made on other video recorders or you want to record from external sources (via the scart socket), the automatic video (colour) system switch-over may lead to colour distortion. You can switch off the automatic TV system switch-over as follows. 1. 1.Press on the remote control to select the TV (colour) system

• Philips VR150/58, EN Automatic switch-off If you haven't used the video recorder for a few minutes in certain modes (e.g.: STOP), it will switch to standby automatically. You can cancel this function to use the video recorder as a tele- vision receiver. 1. 1.Switch on the TV. If required, select the pro- gramme number for the video recorder. 2. 2.Press . The main menu will appear. 3. 3.Select 'VCR SET UP' using or and confirm with . 4. 4.Select 'AUTO STANDBY' using or . 5. 5.Select 'OFF' (no automatic switch-off) or 'ON' (automatic switch-off) with . 6. 6.To end, press . Clock Display This function allows you to switch the VCR dis- play off. It is u

• EN No picture when you play a cassette: • There is no recording on the cassette: change the cassette. • You have selected the wrong programme number on the TV for playing cassette: on the TV, select the correct programme number for the video recorder. • The cable connecting the TV and the video recorder has come loose: check the cable. Poor picture quality when you play a

• Philips VR150/58, EN PHILIPS NORGE AS Sandstuveien 70, PO Box 1, Manglerud N-0612 Oslo NORWAY Phone: 2274 8250 OY PHILIPS AB Linnoitustie 11, 02600 Espoo FINLAND puh. 09 615 80 250 PHILIPS KUNDTJÄNST Kista Entré Knarrarnäsgatan 7 164 85 Stockholm SWEDEN Tel: (0)8 598 52 250 PHILIPS POLSKA Al. Jerozolimskie 195B 02-222 Warszawa POLSKA TEL.: (022)-571-0-571 INFOLINKA PHILIPS Safránkova 1 150 00 Praha 5 CZECH REPUBLIC TEL.: (02)-330 99 330 PHILIPS Iberia, S.A. C/Martinez Villergas, 49 28027 MADRID SPAIN Phone: 902-11 33 84 PHILIPS AUSTRIA GMBH Triesterstrasse 64 1101 Wien AUSTRIA

More Instructions:

Philips VR150/58 Specifications 15-02-2023 2

DOWNLOAD

Related Products and Documents (DVR):

Comparable Devices:

Similar Resources:

• Panasonic DMRE80H (64 pages) Dear customerThank you for purchasing this product. For optimum performanceand safety, please read these instructions carefully.Before connecting, operating or adjusting this product, please readthese instructions completely. Please keep this manual for future ref-erence.Region number supported by this unitRegion numbers are allocated to DVD players and soft …

• Honeywell HUS-NVR-1032/6032-E (101 pages) Document 800-13326 Rev. C HUS-NVR-1032/6032-E HUS-NVR-1032/6032-C 32CH Network Video Recorder User Guide 32 䙊䚃㖁㔌㿶仁ᖅۿᵪ ⭘ᡧ᡻޼ …

• HIKVISION DS-7200HVI-ST Series (8 pages) Quick Start Guide DS-7200HVI-ST Series DVR (V1.0.2) Quick Start Guide - DS-7200HVI-ST Series DVR 1 Menu Structure The menu structure of the DS-7200HVI-ST Series DVR is as followed: Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of your DVR. To start your DVR: 1. Ensure the power supply is plugged into an e …

• Clover CDR-4770 (90 pages) • Thank you for purchasing this Digital Video Recorder.• Before using the Digital Video Recorder, please read all the instructions(and the safety information) contained in this User Guide before you first use your Digital Video Recorder.• Please keep this User Guide handy for future use.• Before connecting and installing any third party cameras, moni …

• Pioneer DVR-550HX-S (155 pages) Operating InstructionsDiscover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu)DVR-550HX-SHDD/DVD RECORDERHDD/DVD RECORDEROperating Instructions<VRB1458-A>Printed in UKPublished by Pioneer Corporation.Copyright © 2007 Pioneer Corporation.All rights reserved.http://www.pioneer.co.ukhttp://www.pionee …

• Planet DVR-1670 (2 pages) 4/16-Channel H.264 Digital Video RecorderKey FeatureData Sheet1Regarding to the communication of broadband becomes more and more popular, traditional CCTV surveillance system is gradually upgraded to packet switching TCP / IP network. The DVR-470 / DVR-1670 supports up to 4/16 cameras. On the other hand, it is designed to be a professional type of security d …

Comments, Questions and Opinions: