Hitachi HF-W6500 45/40 Operation & User’s Manual
|
Hitachi HF-W6500 45/40, S-5 SAFETY INSTRUCTIONS (Continued) 2. SAFETY WARNINGS IN THIS MANUAL 2.1 Safety Warning Indicated as “NOTICE” z Depending on the type of failure, important files may be lost when you use this equipment. Files can be lost by power failure and human mistakes during operation in addition to the failure of the equipment. Should such a situation occur, the files cannot be recovered. In order to prevent data loss, make it a routine to save your files and establish a systematic way of backing up files. (Page i) z A reco
Hitachi HF-W6500 45/40, 3. RESTORING THE FACTORY CONDITION USING A RECOVERY DVD 3-1 CHAPTER 3 RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD This chapter describes the following procedure: ・The procedure to restore the system drive back to the factory-shipped conditions when you discontinue the system you have built. NOTE In order to perform the procedure described in this chapter, you need a recovery DVD. A recovery DVD comes inside the package of an HF-W only if you purchase an HF-W that is specifically stated to include a reco
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-4 (3) Installation of Hyper-V ™ Perform the following procedure to install Hyper-V ™ . 1. Click Start button. Click Administrative Tools and then Server Manager. 2. Click Roles. In the displayed pane, click Add Roles. 3. The Add Roles Wizard opens and the Before You Begin window appears. Click Next button.
Hitachi HF-W6500 45/40, 2. CONFIGURING BASIC SETTINGS AFTER OS SETUP 2-3 2.1.2 Setting up the screen 1. If you are not logged on to the computer as an administrator, log on to the computer as an administrator. 2. Right-click the desktop to display a pop-up menu. Click Screen Resolution. 3. Configure the screen resolution as required. Click OK. 4. The Display Settings screen appears. If you want to save this setting, click Keep changes. If not, click Revert and configure the screen resolution again.
Hitachi HF-W6500 45/40, 1. SETUP PROCEDURE WHEN YOU TURN ON THE POWER FOR THE FIRST TIME 1-7 1.2.2 Setup procedure of Windows Server® 2008 R2 Standard Follow the procedure below to set up Windows Server® 2008 R2 Standard. 1. Turn on the power to the computer. A “Setup is starting services” message is displayed. Then the OS automatically restarts. Wait for a while after the OS restarts. Then the Set Up Windows window for Windows Server® 2008 R2 Standard appears. 2. A window is displayed to select a display language. Select a display language and then click Next. For example, if you want to select the English language, select My language is English from th
APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-1 APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) Windows Server® 2008 R2 provides one free guest OS license, and this product offers a virtual environment on which Windows Server® 2008 R2 is installed as the guest OS. This
3. RESTORING THE FACTORY CONDITION USING A RECOVERY DVD 3-5 5. If you press the [y] key in the confirmation message for changing the size of the boot partition (step 4), a message is displayed to prompt you to enter a boot partition size. Do you change the size of boot partition? In case of "No",it is set to the default size (NNN MB). (Yes[y]/No[n]):y Input the size of boot
Hitachi HF-W6500 45/40, 1. SETUP PROCEDURE WHEN YOU TURN ON THE POWER FOR THE FIRST TIME 1-4 3. A setup screen for the country or region, the time and currency format, and the keyboard or input method settings appears. ・If the English language was selected at step 2, just leave the settings as they are and click Next. ・If you selected a language other than English, configure the country or region, the time and currency format, and the keyboard or input method settings as required and click Next. The time and currency format setting must be config
Hitachi HF-W6500 45/40, APPENDIX A SETUP PROCEDURE WHEN USING Windows XP Mode (FOR Windows® 7 ONLY) A-9 NOTE When Windows XP Mode is started for the first time after the setup, you may find the time zone of Windows XP Mode is not the same as the time zone of Windows® 7. If this happens, you need to manually change the time zone of Windows XP Mode so that they are the same.
Hitachi HF-W6500 45/40, 4. PRECAUTION 4-10 10. The Profile window of the New Inbound Rule Wizard is displayed. ・Specify the profiles to which the rule applies. ・Click Next. 11. The Name window of the New Inbound Rule Wizard is displayed. ・In the Name box, type the name of the port. ・Click Finish. 12. Confirm that the just created rule is registered in the Inbound Rule list in the Windows Firewall with Advanced Security window. And then close the window. 13. Close the Windows Firewall window.
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-6 7. When the Confirm Installation Selections window appears, click Install button. (Hyper-V ™ begins to be installed.) 8. When the Installation Results window appears, click Close button. 9. A message appears prompting you to restart the computer. Click Yes button and restart the computer. (Restart is performed several times until installation is completed.)
Hitachi HF-W6500 45/40, 4. PRECAUTION 4-3 4.4 Scheduled Functions by Default In Windows® 7 and Windows Server® 2008 R2, various functions are scheduled by default and executed periodically in the background. Among those functions, Windows Defender (anti-spyware feature) and the disk defragmenter may increase the system load significantly when they run and may affect the operation of the applications for business use. Therefore, we recommend changing the scheduled times for those two functions in order not to conflict with the schedule of the applications for business use. The initial schedules for tho
Hitachi HF-W6500 45/40, 2. CONFIGURING BASIC SETTINGS AFTER OS SETUP 2-6 2.1.4 Setting up the network environment In the local area network settings, DHCP is used (that is, “Obtain an IP address automatically” is selected) by default. If you do not use DHCP and want to specify an IP address, follow the procedure below: Note that the following procedure is for the case that Internet Protocol Version 4 (TCP/IPv4) is used. If you use Internet Protocol Version 6 (TCP/IPv6), select Internet Protocol Version 6 (TCP/IPv6) at step 8. 1. If you are not logge
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-18 8. Step 1 lists the phone numbers for the license authentication desk. Phone one of the numbers. 9. Follow the voice instructions and enter the installation ID displayed in Step 2 on the dial pad of your phone. When the authentication is completed, you hear the confirmation ID on the phone. Write down the number.
Hitachi HF-W6500 45/40, 4. PRECAUTION 4-12 4.6 Precautions about File Sharing A STOP 0x7e error may occur while file sharing over a network is used if the file server uses Windows® 7 or Windows Server® 2008 R2. When you use file sharing, visit the following URL of Microsoft for the details and corrective actions. Operating system intermittently crashes with a “0x0000007E” Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 http://support.microsoft.com/kb/2528614
APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-12 (6) Setup of the guest OS Set up Microsoft® Windows Server® 2008 R2, Standard. Perform the following procedure to start the virtual machine and set up the basic environment. 1. Click Start button. Click Administrative Tools and then Hyper-V Manager. 2. Right-cl
Hitachi HF-W6500 45/40, 2. CONFIGURING BASIC SETTINGS AFTER OS SETUP 2-1 CHAPTER 2 CONFIGURING BASIC SETTINGS AFTER OS SETUP This chapter describes the following setup procedure: ・Setup procedure of basic settings after OS setup Perform this setup procedure as required after OS setup. Pre-installed OS Description Windows® 7 Professional Set up those settings according to “2.1 Setting Up Basic Settings of Windows® 7”. Windows Server® 2008 R2 Standard Set up those settings according to “2.2 Setting Up Basic Settings of Windows Server® 2
Hitachi HF-W6500 45/40, 1. SETUP PROCEDURE WHEN YOU TURN ON THE POWER FOR THE FIRST TIME 1-5 5. The password input window is displayed. ・Enter a password in the Type a password box and in the Retype your password box. ・Enter a password hint in the Type a password hint box. ・Click Next. 6. The Please read the license terms window is displayed. ・Check the displayed contents and select the I accept the license terms check box. ・Click Next. 7. The Help protect your computer and improve Windows automatically window is displayed. ・Click Ask me later. 8. The Review your time and date settings window is displayed. ・Configure the time zone, the date and the time. ・Click
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-3 (2) Installation of a virtual environment Perform the following procedure to install a virtual environment used by Hyper-V ™ . NOTE Install the virtual environment in “C:\Virtual Machine\WS08R2”. If you have already used Hyper-V ™ to create and use the files under “C:\Virtual Machine\WS08R2” as a virtual machine, this installation procedure overwrites those files. Make a backup as necessary. 1. If you have not logged on with the administrator account of the co
APPENDIX A SETUP PROCEDURE WHEN USING Windows XP Mode (FOR Windows® 7 ONLY) A-13 6. The Uninstall an update window is displayed. Click Yes. 7. After the installation is complete, a window is displayed to prompt you to restart the system. Click Restart Now to restart. This completes the uninstallation procedure for Windows Virtual PC. NOTE When you want to reinstal
Hitachi HF-W6500 45/40, APPENDIX A SETUP PROCEDURE WHEN USING Windows XP Mode (FOR Windows® 7 ONLY) A-12 (b) Uninstalling Windows Virtual PC Follow the procedure below to uninstall Windows Virtual PC. 1. If you are not logged on to the computer as an administrator account, log on to the computer as an administrator account. 2. Click Start and then click Control Panel. 3. Click Programs. 4. Under Programs and Features, click View installed updates. 5. The Installed Updates window opens. From the list, select Windows Virtual PC (KB958559) and then cli
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-8 (4) Import of a virtual machine Perform the following procedure to import a virtual machine. NOTE When you discard an existing virtual environment and configure a new virtual environment, delete the existing virtual machine from Hyper-V Manager and then import the new virtual machine. When you delete a virtual machine, make sure you delete the virtual hard disk file. The virtual hard disk file is the following by default: “C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks
Hitachi HF-W6500 45/40, APPENDIX B SETUP PROCEDURE WHEN BUILDING A VIRTUAL ENVIRONMENT (FOR Windows Server® 2008 R2 ONLY) B-13 5. The license agreement window appears. Read the terms carefully, select the I accept the license terms check box, and click Start button. 6. When a message appears asking you to change the administrator password, click OK button.
Hitachi HF-W6500 45/40, 1. SETUP PROCEDURE WHEN YOU TURN ON THE POWER FOR THE FIRST TIME 1-8 3. A setup screen for the country or region, the time and currency format, and the keyboard or input method settings appears. ・If the English language has been selected in step 2, just leave the settings as they are and click Next. ・If you has selected a language other than English, configure the country or region, the time and currency format, and the keyboard or input method settings as required and click Next. The Time and currency format setting must be configured
DOWNLOAD |
ExpertDAQ EX-92290-i Series Desktop Operation & user’s manual
EX-92290-i Series |
Winmate FM08 Desktop Quick start manual
FM08 |
Thermaltake Wing RS 100 Desktop Operation & user’s manual
Wing RS 100 |
Hitachi UU610cz Desktop Instruction manual
UU610cz |
Hitachi HF-W2000 Desktop Instruction manual
HF-W2000 |
HP CQ5110F - Presario - 3 GB RAM Desktop Limited warranty
CQ5110F - Presario - 3 GB RAM |
HP Deskjet 5850 Desktop Operation & user’s manual
Deskjet 5850 |
Lenovo ThinkCentre Edge 91 Desktop Guía del usuario
ThinkCentre Edge 91 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | HP | ProLiant SL165z - G6 Server | Maintenance and service manual | hp/proliant-sl165z-g6-server-7WL.pdf | 29 Jan 2024 | 80 | 4.37 Mb |
2 | RCA | DRC015 | Manual | rca/drc015-5XM.pdf | 10 Jan 2023 | 58 | |
3 | Haier | MRV II AV10NMVERA | Operation & user’s manual | haier/mrv-ii-av10nmvera-FN6.pdf | 19 Jun 2023 | 44 | |
4 | GE | JGBP36DEMBB | Datasheet | ge/jgbp36dembb-733.pdf | 17 Nov 2023 | 2 | |
5 | Roland | V-HI-HAT VH-11 | Owner's manual | roland/v-hi-hat-vh-11-VR2.pdf | 30 Sep 2022 | 12 | 0.92 Mb |
6 | Motorola | MOTORAZR2 V8 | Service manual | motorola/motorazr2-v8-97U.pdf | 19 Jul 2023 | 94 |
Eaton
CROUSE-HINDSSERIESLeergehäuse GHG 716; IndustrieEnclosures GHG 716; industrialBoîtier vide GHG 716; industrieBetriebsanleitungOperating instructionsMode d’emploiGHG 710 7001 P0007 D/GB/F (-)
…
Crouse-hinds series(24 pages) |
HP
HP ProLiant BL680c Generation 5 Server Blade Installation Instructions Overview Installation of a server blade requires the following steps: 1. Install and configure an HP BladeSystem c-Class enclosure. 2. Install any server blade options. 3. Install interconnect modules in the enclosure. 4. Connect the interconnect modules to the network. 5. Ins …
ProLiant BL680c(3 pages) |
Lenovo
Kurzübersicht Inhalt - Wichtige Sicherheitshinweise - Gewährleistung und sonstige Bemerkungen - Computer in Betrieb nehmen - Software wiederherstellen - Fehlerbehebung und Diagnose- programme - Hilfe und Service
…
ThinkCentre A35(94 pages) |
HP
HP Controller Enclosure BatteryReplacement Instructions© Copyright 2009 Hewlett-Packard Development Company, L.P.Second edition: May 2011The information in this document is subject to change without notice.Printed in Puerto Ricowww.hp.com*593090-001*About this documentFor the latest documentation, go to http://www.hp.com/support/manuals, and select your pro …
4400(2 pages) |
Epson
123© 2012 Seiko Epson Corporation. All rights reserved.Printed in XXXXXXConnect and plug in.Connectez et branchez.Anschließen und einstecken.Aansluiten en stekker in stopcontact.ATurn on.Mettez sous tension.Einschalten.Aanzetten.BOpen.Ouvrez.Önen.Openen.A BRemove yellow tape.Retirez la bande adhésive jaune.Gelbes Band entfernen.Gele tape v …
Expression Home XP-305(4 pages) |
Linksys
Get IntelliMover today!Call toll-free 1-866-338-8663Moves your e-mail, music, photos, files, folders, settings, and more!Available at www.hpshopping.comRev up your new PC with a memory upgradeAvailable at www.hp.com/go/hpmemory®112Start your wireless network with LinksysShare your high-speed Internet connection, files, printing, and more – all without st …
Presario SR1400 - Desktop PC(1 pages) |
Husqvarna Lawn and Garden Equipment 326HDAX-series326HDAX-series Operator's manual - PR4481 326HDAX-series, 24 |
Super Circuits DVR mdvr50Super Circuits DVR Operation & user’s manual (File: super-circuits-mdvr50-dvr-27, 10/12/2023) mdvr50, 27 |
Fetco Coffee Maker C212113 ZURICH TSUsers manual and operator instructions for Fetco C212113 ZURICH TS Coffee Maker C212113 ZURICH TS, 12 |
Unitech Keyboard K2714PDF Manual (@IP1RJJ), Unitech K2714 Keyboard (28.11.2023) K2714, 1 |
Lincat Racks & Stands OA8914Racks & Stands PDF Fitting instructions OA8914, 5 |
HoMedics Clock Radio SOUND SPA SS-400BSOUND SPA SS-400B Instruction manual and warranty information - 8R2294 SOUND SPA SS-400B, 5 |
Ameriwood Indoor Furnishing 9155Ameriwood Indoor Furnishing 9155 Assembly manual 9155, 9 |
Epson Projector PowerLite Presenter LEpson PowerLite Presenter L User Manual (Operation & user’s manual), @39CVV2 PowerLite Presenter L, 80 |
Aiwa Stereo System XR-H2000 LHAiwa XR-H2000 LH User Guide (Doc Type: Stereo System Service manual) XR-H2000 LH, 63 |
Rollei Projector RVS1500Rollei RVS1500 User Manual (Operation manual), @L1G5GL RVS1500, 70 |
ROHO Wheelchair AGILITY#L4LD7Z: AGILITY Wheelchair Operation manual AGILITY, 22 |