Manualios.com

Hitachi WH 12DAF2 Technical Data And Service Manual

  • WH 12DAF2 Impact Driver
  • ma/bQguGXHLng
  • Technical Data And Service Manual
  • PDF / Adobe Acrobat Reader
  • 41

Hitachi WH 12DAF2 Manual Online:

4.6, 2305 votes
Hitachi WH 12DAF2 User Manual
Hitachi WH 12DAF2 User Guide
Hitachi WH 12DAF2 Online Manual

Text of Hitachi WH 12DAF2 User Guide:

  • Hitachi WH 12DAF2, Page CONTENTS 1. PRODUCT NAME ............................................................................................................................ 1 2. MARKETING OBJECTIVE .............................................................................................................. 1 3. APPLICATIONS ............................................................................................................................... 1 4. STANDARD EQUIPMENT ............................................................................................................... 1 5. SELLING POINTS ..................................

  • Hitachi WH 12DAF2, * ALTERNATIVE PARTS --- 3 ---8 -- 05 STANDARD ACCESSORIES OPTIONAL ACCESSORIES ITEM NO. CODE NO. DESCRIPTION REMARKS NO. USED ITEM NO. CODE NO. DESCRIPTION REMARKS NO. USED WR 12DAF2 * 501 CHARGER (MODEL UC 18YG) 1 * 501 CHARGER (MODEL UC 14YFA) 1 * 502 TORCHLIGHT (MODEL UB 12D) 1 FOR GBR * 503 322-752 BIT ADAPTER 1 FOR AUS, NZL * 504 324-359 CASE 1 * 504 322-611 CASE 1 FOR GBR 601 CORNER ATTACHMENT ASS’Y 1 INCLUD. 602-618 602 955-300 HOUSING 1 603 955-301 METAL 3 604 955-302 SPINDLE 1 605 HITACHI LABEL

  • Hitachi WH 12DAF2, --- 6 --- 6. SPECIFICATIONS 6-1. Specifications Capacity Small screw M4 --- M8 (5/32" --- 5/16")* 1 Ordinary bolt M5 --- M12 (3/16" --- 15/32") High-strength bolt M5 --- M10 (3/16" --- 25/64") Tightening torque* 2 110 N • m (1120 kgf • cm, 975 in-lbs.) Tip condition 6.35 mm (1/4") bit holder Type of motor Fan cooled DC magnet motor Enclosure Main body: Glassfiber reinforced polyamide resin (black) and thermoplastic elastomer (green) Aluminum alloy die casting •••••••••••••••••••••••••••••••••••• Hammer case Storage battery: ABS resin (black) Char

  • * ALTERNATIVE PARTS--- 2 --- ITEM NO. CODE NO. DESCRIPTION REMARKS NO. USED PARTS 8 -- 05 WH 12DAF2 *1324-854 GEAR BOX (B) ASS’Y 1 INCLUD. 2-5, 7-25 *1323-939 GEAR BOX (B) ASS’Y 1 INCLUD. 2-5, 7-25 FOR TPE, CHN, SIN, KOR, HKG 2 315-984 RETAINING RING 1 3 315-983 WASHER (D) 1 4 320-409 GUIDE SPRING 1 5 323-954 GUIDE SLEEVE 1 6 992-630 TAPPING SCREW (W/SP. WASHER) D4X40 4 7 323-940 HAMMER C

  • Hitachi WH 12DAF2, TECHNICAL DATA AND SERVICE MANUAL SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT LIST Nos. WH 12DAF2: G836 WR 12DAF2: G837 August 2005 W MODELS WH 12DAF2 WR 12DAF2 Hitachi  Power Tools CORDLESS IMPACT DRIVER WH 12DAF2 CORDLESS IMPACT WRENCH WR 12DAF2 WH 12DAF2 WR 12DAF2

  • Hitachi WH 12DAF2, --- 3 --- (2) Cordless impact wrench Model WR 12DAF2 Soft-grip handle Variable speed reversible switch with electric brake Durable die-casting aluminum hammer case Powerful new design Convenient belt hook with LED job light Max. torque 130 N • m (1150 in-lbs.) WR 12DAF: 110 N • m (975 in-lbs.)

  • Hitachi WH 12DAF2, --- 15 --- 7-3. Number of Screws or Bolts Driven 7-3-1. Per-charge working capacity comparisons Test data on the number of screws which can be driven per battery charge by the new model vs. the previous models are shown in the table below. Please note that the data below are intended for general reference only as the number of screws which can be tightened per charge will vary slightly depending on screw tightening conditions, screw sizes, ambient temperatures and the charging capacity of the battery. (1) Number of screws or bolts driven Battery (Nominal capacity) Tightening condition Model HITACHI WH 12DAF EB 12

  • Hitachi WH 12DAF2, --- 4 --- 5-1. Selling Point Descriptions Common selling points (Models WH 12DAF2 and WR 12DAF2) (1) Soft-grip handle The grip is soft, slip-resistant and comfortable thanks to the soft resin (elastomer) covered on the handle. (2) Convenient belt hook with LED job light It can be used as a hook for suspending from a waist belt or storing. Its yellow LED light is very convenient for such operations as tightening screws in a dark place. This hook features the following: It can be slid out when necessary and slid in when not necessary with one-touch simple operation. The angle can be adjusted in 5 steps. It can be installed on either right or left

  • Hitachi WH 12DAF2, --- 16 --- 8. PRECAUTIONS IN SALES PROMOTION 8-1. Safety Instructions In the interest of promoting the safest and most efficient use of these tools by all our customers, it is very important that at the time of sale the salesperson carefully ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the precautions listed on the Caution Plate and Name Plate attached to each tool. A. Handling Instructions Salespersons must be thoroughly familiar with the contents of the Handling Instructions in order to give pertinent advice to

  • Hitachi WH 12DAF2, --- 5 --- Fig. 3 Selling points of the Model WR 12DAF2 (1) Max. torque 130 N • m (1150 in-lbs.) The maximum torque is 130 N • m (1150 in-lbs.) thanks to the optimum striking design while maintaining high mechanical strength with the durable die-casting aluminum hammer case etc. (2) Tightening torque comparison Figure 3 shows the torque required for tightening an M12 high-strength bolt in 3 seconds with a hexagon socket (overall length 33 mm) (20 % higher than the Model WR 12DAF). *1: Max. tightening torque is based on tighting an M16 F10

  • Hitachi WH 12DAF2, --- 1 --- 1. PRODUCT NAME Hitachi Cordless Impact Driver, Model WH 12DAF2 Hitachi Cordless Impact Wrench, Model WR 12DAF2 2. MARKETING OBJECTIVE The new Models WH 12DAF2 and WR 12DAF2 are the upgraded versions of the well-reputed Models WH 12DAF and WR 12DAF. They incorporate many features including the following with the comparable price. Increased maximum tightening torque Increased battery capacity (standard accessory) Convenient belt hook with LED job light Bit holder Powerful new design With the introduction of the new Models WH 12DAF2 and WR 12DAF2, we aim to inc

  • ELECTRIC TOOL PARTS LIST LIST NO. G836 CORDLESS IMPACT DRIVER Model WH 12DAF2 2005 • 8 • 10 (E1) Hitachi Power Tools 503 504 505 506 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 41 42 43 44 45 40

  • ELECTRIC TOOL PARTS LIST LIST NO. G837 CORDLESS IMPACT WRENCH Model WR 12DAF2 2005 • 8 • 30 (E1) Hitachi Power Tools 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 29 32 33 34 35 37 38 39 40 36 7 2 3 4 5 6 501 502 503 504 501 41

  • Hitachi WH 12DAF2, --- 24 --- Depression for anti-rotating Internal Wire (Black) 60L [28] <25> Internal Wire (Red) 115L [27] <24> Red marking (Indicate positive side) Internal Wire (Red) 115L [27] <24> Motor [26] <23> Fin [42] <38> Internal Wire (Black) 60L [28] <25> Projection of the forwarding/reversing lever FET Machine Screw (W/Sp. Washer) M3 x 4 [41] <37> Fig. 10 DC-Speed Control Switch [32] <30>

  • Hitachi WH 12DAF2, --- 20 --- 8-4. Suggestions and Precautions for the Efficient Use of the Charger (1) Batteries may not be rechargeable immediately after use If the storage batteries are exposed to direct sunshine for an extended period, or if the temperature of the battery is 40 ûC (104 ûF) or higher immediately after they have been used in the tool, the pilot lamp may not light up when the batteries are connected to the Model UC 14YFA or UC 18YG charger. This is because the built-in thermostat functions to stop the charging when the temperature of the storage batteries reach 40ûC (104 ûF) or more. In such a case, th

  • Hitachi WH 12DAF2, --- 25 --- (2) Reassembly of Housing (A).(B) Set [31] <28> Mount the Strap (Black) [39] <35> and housing (B) to housing (A), and secure them with the seven Tapping Screws (W/Flange) D4 x 20 (Black) [29] <26>. (3) Reassembly of the mechanical parts (a) Put Washer (S) [15] <12> onto the shaft of Spindle (B) [17] <14> and mount the Hammer [11] <8> containing the twenty-eight Steel Balls D3 [12] <9>, Washer (J) [13] <10> and the Hammer Spring [14] <11> to Spindle (B) [17] <14>. (b) Align the top of the cam groove on Spindle (B) [17] <14> with t

  • Hitachi WH 12DAF2, --- 2 --- 5. SELLING POINTS (1) Cordless impact driver Model WH 12DAF2 Soft-grip handle Variable speed reversible switch with electric brake Durable die-casting aluminum hammer case Powerful new design Convenient belt hook with LED job light Bit holder Fast tightening speed 30% faster than the Model WH 12DAF Max. torque 110 N • m (975 in-lbs.) WH 12DAF: 88 N • m (780 in-lbs.)

  • Hitachi WH 12DAF2, --- 22 --- Anvil (B) [9] Retaining Ring [2] Washer (D) [3] Guide Sleeve [5] Gap of retaining ring 1 Fig. 7-1 Hold the body and adjust gap of the retaining ring to groove of anvil (B), then insert a small flat-blade screwdriver into the groove at an angle. 2 Fig. 7-2 Press down washer (D) with the screwdriver. 3 Fig. 7-3 Slide the screwdriver under one side of the gap of the retaining ring. 4 Fig. 7-4 Slowly raise the retaining ring using the end face of the guide sleeve as a fulcrum. Then slowly raise the other side of the retaining ring wi

  • Hitachi WH 12DAF2, --- 23 --- Remove the hammer assembly from the J-297 base for washer (S) and support the end surface of Spindle (B) [17] <14>. With a hand press, push down either of the raised faces of the Hammer [11] <8> to compress the Hammer Spring [14] <11>. In this position, extract the two Steel Balls D5.556 [10] <7> from the cam grooves of Spindle (B) [17] <14> and the Hammer [11] <8> with a small flat-blade screwdriver or a similar tool. Then, slowly release the hand press and lift the

  • Hitachi WH 12DAF2, --- 19 --- 1600 (1389) kgf . cm (in-lbs.) 1200 (1048) 800 (694) 400 (347) 12 4 6 8 10 2 0 Tightening torque Battery voltage (2) Effects of low ambient temperatures The tightening torque required may be reduced at low ambient temperatures or under the influence of grease and different torque coefficients (dependent on manufacturing and finishing processes, and specified by bolt manufacturers). (3) Different bolt diameter Differences in bolt diameter will cause variation of the required levels of tightening torque. Generally speaking, tightening torque is higher for large bolts. (4) Different materials being tightened When a bolt is tightened into a soft material such as alu

  • --- 17 --- CAUTION Read thoroughly HANDLING INSTRUCTIONS before use. (9) Do not attempt to disassemble the storage battery or the charger. Special devices, such as a thermostat, are built into the storage battery and charger to permit rapid charging. Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or other hazards. I

Related Products and Documents (Impact Driver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Invacare BAR750 Owner's operating and maintenance manual invacare/bar750-1HZ.pdf 19 Sep 2023 32
2 Lexmark CX310 series Brochure & specs lexmark/cx310-series-48O.pdf 17 Dec 2023 2
3 Xerox CopyCentre C123 High capacity tray installation manual xerox/copycentre-c123-IX7.pdf 06 Dec 2023 3 0.64 Mb
4 Eurotherm 6100A Operation & user’s manual eurotherm/6100a-ST2.pdf 21 Nov 2022 458
5 Euro-Pro GC130HS Owner's manual euro-pro/gc130hs-72J.pdf 21 Aug 2022 8 0.83 Mb
6 Emotiva DMC-1 Operation & user’s manual emotiva/dmc-1-O59.pdf 31 Oct 2022 96 47.95 Mb

Similar Resources:

  • ENKHO

    158377.01

    (57 pages)
    1AVVITATORE A IMPULSI DA 20V20V IMPACT WRENCH20V UDARNI IZVIJAC20V UDARNI ODVIJAC ˇˇcod. articolo 158377.01158377.01IM 158377.01 Ed.1 09/2020Istruzioni per l’uso originaliOriginal instructionsOriginalna navodilaIzvorne upute …
  • Fein

    ASb 110

    (4 pages)
    ASb 110 To be handed to the workshop! Operating instruction for the Impact Wrench type ASb 110 (three phase A. C.) and ASb 110 K (42 Volts) 1. Technical Data Type of current: 3 ~ (A.C. three phase) 50 cycles for screws up to Max. Torque I Type mm I in. kpm llbs. ft I ASb 110 } 1 3/t6 30 50 360 ASb 110 K (42 V) 2. Construction The percussion mechanism of the …
  • Neilsen

    CT3990

    (8 pages)
    AIR IMPACT WRENCH 1/2" Square Drive CT3990 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. …
  • Makita

    TD020D

    (44 pages)
    GBCordless Impact Driver Instruction ManualF Visseuse à chocs sans filManuel d’instructionsD Akku-SchlagschrauberBetriebsanleitungI Avvitatore ad impulso a batteriaIstruzioni per l’usoNL Accu-slagschroevendraaierGebruiksaanwijzingE Atornillador de impacto a bateríaManual de instruccionesP Berbequim de impacto a bateriaManual de instruçõesDK Akku slag …
  • Makita

    DTDA040 Series

    (124 pages)
    DTDA040 DTDA070 DTDA100 DTDA140 ENCordless Impact Driver INSTRUCTION MANUAL 5FRTournevis à Chocs sans Fil MANUEL D’INSTRUCTIONS 16DEAkku-Schlagschrauber BETRIEBSANLEITUNG 28ITAvvitatore a massa battente a batteriaISTRUZIONI PER L’USO 40NLAccuslagschroevendraaier GEBRUIKSAANWIJZING 52ESAtornillador de Impacto InalámbricoMANUAL DE INSTRUCCIONES64PTParafu …
  • Bosch

    IWBH182

    (40 pages)
    IMPORTANT: IMPORTANT : IMPORTANTE: Read Before Using Lire avant usage Leer antes de usar For English Version Version française Versión en español See page 2 Voir page 14 Ver la página 34Op …

Comments, Questions and Opinions: