Manualios.com

Hitachi 5000 Operation & User’s Manual

Hitachi 5000 Manual Online:

3.3, 2311 votes
Hitachi 5000 User Manual
Hitachi 5000 User Guide
Hitachi 5000 Online Manual

Text of Hitachi 5000 User Guide:

  • Hitachi 5000, - 5-3 - Chapter 3 How to Use the Telephone Chapter 5 Presence User list Displaying a list of registered users 1 From the presence menu, Select "1. User list” using the keys of the key, then press the key. 2 A list of registered users is displayed. 3 To register a user, on the user list screen, press the key to select the sub-menu and select "1. Add". Use the number pad to enter the user's telephone number. エラー! 参照元が見つかりません。 If you try

  • - 6-11 - Chapter 6 Other settings Error notification Setting the Error notification 1 From the settings menu, Select "5. Error notify" using the keys of the key, then press the key. Service LED Setting the Service LED 1 From the Error notify menu, Select "1. Service LED", using the keys of the key, then press the key.

  • - 6-14 - Chapter 6 Other settings Information display Information on the network can be checked. 1 From the settings menu, Select "6. Information" using the keys of the key, then confirm with the key. TCP/IP You can check the TCP/IP contents. 1 From the information display menu, select "1. TCP/IP" using

  • - 4-3 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Inbox Displays, edits, and deletes received messages. 1 The message icon is displayed on the standby screen when there is an unread message. To display the message, from the IM menu, Select "1. Recv. box" using the keys of the key, then press the key.. If there is an unread message, a

  • Hitachi 5000, - 4-14 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Setup Configure the ring tone and mode when a message arrives. 1 from the Message menu, Select "5. Setup", using the keys of the key, then press the key. 2 Displays configuration information. Using the key, select “Edit.” There are 16 ring types.(Bell 1~Bell 16) There are four modes. Ringing Vibration Ring+Vib LED Ringer Yes × Yes × Vibrator × Yes Yes × Finally, save with the key.

  • Hitachi 5000, - 9-2 - Chapter 9 Appendix Troubleshooting Phenomena Response Does not start. The battery pack may be dead. If the battery pack is dead, the device will not start and the LED will not light up. Restart it again after recharging the battery using the AC adapter. Cannot operate the keys and the displayed information does not update. Remove the battery pack and then reconnect it. It is hard to see the display Adjust the contrast. エラー! 参照元が見つかりません。エラー! 参照元が見つかり

  • Hitachi 5000, - 3-3 - Chapter 3 Phone book Phone book registration Registration from phone book menu Registering information into the phone book from the new registration menu 1 From the phone book menu, select "2. New number" using the keys of the key, then press the key. 2 Please enter your information. Name: Please enter the name. After inputting this, press the key of the key. Read name: Please enter the Read name for the name. After inputting this, press the key of the key. Telephone number: Please enter the telepho

  • Hitachi 5000, - 4-13 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Outbox 6 To delete all the messages in the Sent box, from the Sent box list screen press the key to select the sub-menu, then select “3. Delete All”. A confirmation screen like that in the figure on the right is displayed. Select "Yes" using the keys of the key, then confirm with the key. All the messages in the Sent box are deleted.

  • Hitachi 5000, - 4-12 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Outbox 5 To delete a sent message, after selecting the message you wish to delete from the Sent box list screen, press the key and select “2. Delete” from the submenu. A confirmation screen like that in the figure on the right is displayed. Select "Yes" using the keys of the key, then confirm with the key. The message is deleted.

  • Hitachi 5000, - 4-7 - Chapter 3 How to Use the Telephone Chapter 4 Messaging New Message Writing and sending a new message. 1 from the Message menu, Select "2. Write Msg.", using the keys of the key, then press the key. 2 Input the message with the number pad. エラー! 参照元が見つかりません。 Finally, confirm with the key. Input the telephone number to send to. As many as ten destinations can be specified. 3 By pressing the key, a confirmation screen like that in the figure

  • Hitachi 5000, - 6-12 - Chapter 6 Other settings Error notification Error message Setting the error messages 1 From the Error notify menu, Select "2. Error Msg.", using the keys of the key, then press the key. Select "On" or "Off" using the keys of the key, then confirm with the key.

  • Hitachi 5000, - 4-4 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Inbox 4 To reply to a received message, select the message to reply to from the Inbox list screen, Then press the key to select the sub-menu and select "1. Reply". Input the message with the number pad. エラー! 参照元が見つかりません。 Finally, confirm with the key. Next, input the telephone number to send to. As many as ten recipient destinations can be specified. By pressing the key, a confir

  • Hitachi 5000, - 5-12 - Chapter 3 How to Use the Telephone Chapter 5 Presence Setting Displays the setting menu. 1 From the presence menu, Select "4. Setup" using the keys of the key, then press the key. 2 Displays configuration information. ・Online bell ・Ring Type ・Mode To change a setting, press the key, select “Edit", then select the new value. For the online level, select "Enabled" or "Disabled". There are five ring types (Ring 1~Ring 5) There are four modes. Ringing Vibration Ring+Vib LED Ringer Yes × Yes × Vibrator × Yes Yes �

  • Hitachi 5000, - 3-10 - Chapter 3 How to Use the Telephone Chapter 3 Phone book Phone book editing 3 Group: Please press the key and select a group. Select the group using the keys of the key. then press the key. After inputting this, press the key of the key. 4 Speed dialing number: Please enter the speed dialing number. 5 After inputting the necessary information, press the key to save the information. To revise a value, move to the item to be revised with the keys of the key, revise its value, and press the key t

  • - 2-14 - Chapter 2 Placing and Receiving Calls Various operation methods Hold function This is used to put a call on hold. The hold tones are played for the other party who is on hold. ■ Hold Pressing the key during a call puts the call on hold. The hold tone is played for the other party on hold. ■ Ending a hold The hold on the

  • Hitachi 5000, - 8-8 - Chapter 8 Web settings General User Menu Edit Group 1. Select Edit Group from the phone book. 2. When adding a group, enter the group name into the new group, and click the “Save” button.

  • Hitachi 5000, - 6-9 - Chapter 6 Other settings Alarm Setting the alarm function 1 To change the alarm function settings, from the setting menu, Select "3. Alarm" using the keys of the key, then press the key. 2 Up to 3 alarm settings can be registered.. Select "1. Alarm 1", "2. Alarm 2", or "3. Alarm 3" using the keys of the key, then press the key. 3 Alarm setting information is displayed. ・Setup ・Time ・Ring ・Repeat To change a setting, Using the key, select “Edit.” For the setup, select "On" or "Off". If you select "Off&qu

  • Hitachi 5000, - 8-4 - Chapter 8 Web settings General User Menu Phone book Searches/configures/deletes the phone book data in the WirelessIP5000. ■ Phonebook Menu List Search by Index: Searches/edits/deletes by speed dial number. Name Search: Searches/edits/deletes by name. Phone Number Search: Searches/edits/deletes by telephone number. Group Search: Searches/edits/deletes by group. Registration of a New Phone Number: Registers a new number to the phone book data. Group Registration: Searches/edits/deletes groups.

  • Hitachi 5000, - 5-5 - Chapter 3 How to Use the Telephone Chapter 5 Presence User list 6 To delete a registered user, select that user from the user list screen, then press the key to select the sub-menu, then select "5. Delete". A confirmation screen like that in the figure on the right is displayed. Select "Yes" using the keys of the key, then confirm with the key. The user is deleted.

  • - 5-4 - Chapter 3 How to Use the Telephone Chapter 5 Presence User list 4 To send a message to a registered user, select that user from the user list screen, then press the key to select the sub-menu and select "2. Send SMS". 5 To register a registered user in the blocked list, select that user from the user list screen, p

  • Hitachi 5000, - 3-4 - Chapter 3 Phone book Phone book registration 3 Group: Press the key to select a group. At first, it is set to "Undefined". Select the group using the keys of the key, then press the key. After inputting this, press the key of the key. 4 Speed dialing number: Please enter the speed dialing number. 5 After inputting the necessary information, press the key to store the information. To revise a value, move to the item to be revised with the keys of the key, revise its value, and press the key to save the information. If you press the key without entering the telephone num

  • Hitachi 5000, - 8-6 - Chapter 8 Web settings General User Menu 3. The Phone book data matching the search information is displayed. 4. When the displayed phone book data is selected it can be edited/deleted.

Related Products and Documents (IP Phone):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Motorola MOTO VE465 Getting started manual motorola/moto-ve465-R1W.pdf 05 Jun 2023 9
2 Lenovo S880 Operation & user’s manual lenovo/s880-8FA.pdf 17 Jul 2022 40
3 HP Officejet d125xi Network manual hp/officejet-d125xi-T5V.pdf 12 Mar 2023 28 0.32 Mb
4 Weslo Portable Spa Manual  weslo/portable-spa-54N.pdf 18 May 2023 22 1.03 Mb
5 LG DVX680 Owner's manual lg/dvx680-1H9.pdf 13 Mar 2023 16
6 ZALMAN ZM-HE130 Manual  zalman/zm-he130-6AD.pdf 18 Nov 2022 6

Similar Resources:

  • Siemens

    Gigaset C460 IP

    (2 pages)
    Gigaset C460 IP VoIP and fixed line telephony - Simple VoIP-telephony without PC Interface: a/b (analogue), IP/Ethernet Operation: PSTN/ PBX Standards: DECT, GAP, SMS, SIP, RTP, DHCP, STUN Configuration • Connection of 1 external PSTN line + 1 external IP line • Up to 6 handsets can be registered Main Features General  Plug&Play (th …
  • Cisco

    IP Communicator

    (80 pages)
    Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Cisco IP CommunicatorUser GuideVersion 1.1Customer Order Number: Text Part Number: OL-5051-01 …
  • Yealink

    Yealink SIP-T22P

    (2 pages)
    Yealink SIP-T22P features intuitive user interface and enhanced functionality which make it easy for people to interact and maximize productivity. With TI TITAN chipset and TI leading VoIP voice engine,it enables enhanced high-definition audio, outsourced management options, flexible deployment and third-party communications applications. As a cost effective …
  • Yealink

    Verizon One Talk W56HV

    (8 pages)
    Verizon One Talk DECT IP PhoneW60B Base Station and W56HV Handsetverizonwireless.com/support/one-talk/Quick reference guide10660898_One_Talk_W60B_Quick_Reference_Guide_f1a_sb.indd 1 11/7/17 11:08 AM …
  • Mitel

    5320

    (8 pages)
    Installation GuideM MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders. © Copyright 2009, Mitel Networks Corporation. All Rights Reserved.MITEL5320 IP PHONEACB …
  • Genban

    IP8820

    (158 pages)
    IP Phone Installer Guide IP8820/IP8830/IP8840 SIP (Session Initiation Protocol) GENBAND Call Servers Please read this manual carefully before installation. Retain it for future reference. …

Comments, Questions and Opinions: