Hitachi 62VS69 - UltraVision VS69 Series Operating Manual

Text of Hitachi 62VS69 - UltraVision VS69 Series User Guide:

• O Antenna Input CABLE - CATV (Cable TV) input. AIR - RF antenna input. Audio/Video Inputs 1, 2, 3 and 4 By using the INPUTS button, CURSOR buttons and SELECT button of the remote control you can select each video source. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, ins

• Hitachi 62VS69 - UltraVision VS69 Series, TheexactarrangementyouusetoconnecttheVCR,camcorder,laserdiscplayer,DVDplayerorHDTVSetTop BoxtoyourTVsetisdependentonthemodelandfeaturesofeachcomponent.Checktheowner'smanualof eachcomponentforthelocationofvideoandaudioinputsandoutputs. Thefollowingconnectiondiagramsareofferedassuggestions.However,youmayneedtomodifythemto accommodateyourparticularassortmentofcomponentsandfeatures.Forbestperformance,videoandaudio cablesshouldbemadefromcoaxialshieldedwire. BEFORE OPERATING EXTERNAL VIDEO SOURCE Connect an external source to the INPUT terminal, then press the INPUTS button to show the INPUTS menu. Use the CURSOR PAD to select the CABLE, AIR or INPUT of your choice. Then press the SELECT butt

• Lamp Power Control Use this featureto have the TV turned OFF automatically when a video signal is not detected for 15 minutes. 1. Press the CURSOR buttons • or I_ to highlight Yes or No. Set The Inputs Use this feature to give a name to any of the five video inputs. A named input is shown in the INPUTS menu. 1. Press the CURSOR buttons •, I_, • or • to highlight the name of the video input

• Hitachi 62VS69 - UltraVision VS69 Series, HITACHI nspire the LCD REAR PROJECTION TELEVISION Operating Guide for 55VS69 and 62VS69 IMPORTANTSAFETY INSTRUCTIONS............................................................................ 2-3 FIRST TIME USE ....................................................................................................................... 4-19 THE REMOTE CONTROL .................................................................... 20-31 ON-SCREEN DISPLAY.................................................................................................... 32-55 LAMP REPLACEMENT .................. 56-59 USEFUL INFORMATION.........

• Hitachi 62VS69 - UltraVision VS69 Series, POWER O POWER button Press this button to turn the TV set on or off when the remote is in TV mode. O MODE buttons These buttons allow the remote to control your TV, VCR, DVD, Cable box/Satellite box depending on which button is pressed. Refer to page 20 for how to change between each of these modes. O PAUSE button Press the PAUSE button to freeze the picture. Press the EXIT button to return the picture to motion. Press the PAUSE button repeatedly to cycle through the three different freeze modes (see page 26). @-- @ ®® __@ ii ii ii ii ii ii ii ii ii ii ii ii i Freeze iiiiiiii

• FEATURES: SuperfinePictureQuality;1280LineHorizontal Resolution Remote(ControlsmanyPVR/VCRbrands,cable boxes,satelliteboxes,andotheraudioequipment). NewEasy-to-Use(3-Language)On-ScreenMenu FullSetofinputJacks,includingS-Video COMPONENTVIDEO:Y-PB/PR SixAspectModes ClosedCaptionDecoder 2-TunerPictureinPicture 2AntennaInputs(EitherforAnalog/Digital) VideoInputSen

• Hitachi 62VS69 - UltraVision VS69 Series, END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE IMPORTANT - READ CAREFULLY: This End User License Agreement for HITACHI DTV Software (this "Agreement") is a legal agreement between you ("you" or "your"), in your capacity as the owner of a HITACHI brand digital television (the "DTV'), and HITACHI America, Ltd., Home Electronics Division ("HITACHI"). By using the DTV or the operating system software installed on the DTV (the "System Software") or any Upgrade (as defined below, and together with the System Software, the "Software"), you a

• Hitachi 62VS69 - UltraVision VS69 Series, INPUT 4 Auto Link Use this function to automatically turn the TV on and tune to INPUT 4 when it detects a video signal to INPUT 4. 1. Use the CURSOR buttons _1 or • to highlight the AUTO LINK setting of your choice. When AUTO is selected, the TV will turn on and tune to INPUT 4 automatically, when the Input 4 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player or DVD player. 3. When REMOTE is selected, the TV will turn on and switch to Input 4 automatically when the INPUT 4 input device is turned on and the VCR, laserdisc, or

• Hitachi 62VS69 - UltraVision VS69 Series, Matchthenumbersbelowtothediagramfor speakerplacement. O Thetelevision'sinternalspeakerswillactas centerspeaker(selectAUDIO- INTERNAL SPEAKERS-TVAS CENTER). These FRONT left and right speakers are connected to the FRONT output of a separate audio amplifier. These REAR left and right speakers are connected to the Rear output of a separate audio amplifier. O This subwoofer is connected to the LFE/SUB Out output of a separate audio amplifier. RCAt,* opt,oo_ Cabl Cab I L R CENTER OPTICAL m FRONT OUT IN OITL OUT Stereo System Amplifier REAR OUT LFE/SUB StereoSyslemAmplifier orOVONayer 15

• Hitachi 62VS69 - UltraVision VS69 Series, PIP Mode Picture-in-Picture This feature is only available with a Digital 16:9, 720p and 1080i signal. To prevent a pattern burn, occasionally move the sub-picture using the CURSOR buttons. SPLIT Mode Picture-in-Picture Split Mode PIP displays the main picture and sub- picture evenly on the screen. SURF Mode Picture-in-Picture Surf Mode PIP automatically scans all active channels (those set in memory) and displays them as PIP sub- pictures or Thumbnail channels. Press the SELECT button to stop on a chosen channel. Use the remote CUR

• Hitachi 62VS69 - UltraVision VS69 Series, CONNECTING A COMPONENT SOURCE TO INPUT 3 OR 4: Y-PePR. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set on the right. Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack. Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack. Connect the cable from the AUDIO ©UT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack. Press the the INPUTS butto

• Hitachi 62VS69 - UltraVision VS69 Series, Press MENU on the remote control to display the different features on your HITACHI LCD Rear Projection TV. Press the CURSOR buttons to navigate and highlight a different feature of the On-Screen Display menu. Press the SELECT button to select. Press EXIT on the remote control to quickly exit from a menu. This part of the screen shows which selections are available. ¥ ..,_e___This part of the screen shows which Remote Control buttons to use. 32

• Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the out

• Hitachi 62VS69 - UltraVision VS69 Series, Canadian Ratings (Eng) Use CANADIAN RATINGS (ENG) to block any type of movie and television program in Canada that you feel might be inappropriate in its content. 1. Use the CURSOR buttons • or • to select the CANADIAN RATINGS (ENG) category that you want to block. Press SELECT to block the CANADIAN RATINGS (ENG) that you have selected. Once rating is selected, for example C8+, all movies and television programs rated 08+ and higher (G, PG, 14+ and 18+) will be blocked automatically. 3. Press EXIT to quit the menu or select CANADIAN RATINGS (ENG) to return to the previous menu. Canadian Ratings English Table C Programming intended for children under age 8 - Violence Guideli

• Hitachi 62VS69 - UltraVision VS69 Series, Lamp Replacement 1. Turn off theTV and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool down before replacing it. 120V 2. At the rear of the TV, locate the LAMP COMPARTMENT. Using a Phillips type screwdriver loosen the screw until the LAMP COVER can be removed. LA _,,IP COVER & SCREW LAMP COMPARTMENT Slide to the left, then pLl_ back Turn counterclockwise to loosen the lamp cover screw. 57

• Hitachi 62VS69 - UltraVision VS69 Series, OPERATING THE PRECODED FUNCTION FOR YOUR SET-TOP-BOX/SATELLITE RECEIVER. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set- top-box/satellite systems (refer below for pre-codes). 1. Turn ON your set-top-box/satellite systems. 2. Aim the remote control at the front of your set-top- box/satellite systems. 3. To switch to set-top-box/satellite (STB) pre-coded mode, press and release the SAT button. Hold down the SAT button on the remote and enter the two digit preset code that m

• Hitachi 62VS69 - UltraVision VS69 Series, Accessories................................................................4 Antennas(Connecting)...............................................6 AspectRatio.............................................................22 Audio Languages............................................................39 DolbyDigital.........................................................39 DRC(DynamicRangeCompression)...................39 SRS.......................................................................37 BBE.......................................................................37 AudioSettings..........................................................37 AudioSource.......

• Hitachi 62VS69 - UltraVision VS69 Series, IGNITIONNOISE: Blackspotsorhorizontalstreaksmayappear,picturemayflutterordrift. Usuallycausedbyinterferencefromautomobileignitionsystems,neonlamps, electricaldrills,andotherelectricalappliances. GHOSTS: Ghostsarecausedbythetelevisionsignalfollowingtwopaths.Oneisthe directpathandtheotherisreflectedfromtallbuildings,hillsorsomeother objects.Changingthedirectionorpositionoftheantennamayimprove reception.Ghostingmayalsobecausedbydefectsintheantennasystemsuch asunshieldedleadsorconnectingseveralsetstothesameantennawithout usingmultipleantennacouplers. SNOW: Ifyourreceiverislocate

• Hitachi 62VS69 - UltraVision VS69 Series, 3. LoosenthescrewsecuringthelampunitwithaPhillipsheadscrewdriverasshown.Removethelamp unitbyholdingthelamphandle,thenpullingoutwards. LAMPUNIT PULL OUTWARDS THE LAMP UNIT Turn counterclockwise to loosen the lamp unit screw. LAMP UNIT 4, Replace with the new lamp. Place the removed lamp into the empty box of the replacement lamp. Do not touch the front glass of the new lamp or its receptacle. This may shorten the life of the lamp and reduce the picture quality. • Push the lamp unit back to its original position. • Tighten the screw firmly on the lamp unit. If it is loose, the TV may not operate correctly. PUSH iNWARDS THE LAMP UNiT LAMP UNIT Tur

• Hitachi 62VS69 - UltraVision VS69 Series, OPERATING THE PRECODED FUNCTION FOR YOUR CABLE BOX. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box (refer below for pre-codes). 1. Turn ON your cable box. 2. Aim the remote control at the front of your cable box. 3. To switch to Cable (CBL) pre-coded mode, press and release the CABLE (CBL} button. Hold down the CBL button on the remote and enter the two digit preset code that matches your cable box, as shown below. Release the CBL button. Aim the remote at the cable box and press the POWER button. The remote will turn off your cable box when the correct two digit preset code

• Hitachi 62VS69 - UltraVision VS69 Series, Select VIDEO to adjust picture settings and improve picture quality. You can independently customize each of the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected input will reset to initial conditions. Picture Mode Use this function to choose from automatic picture settings to optimize your TV's performance. 1. Use the CURSOR buttons _1 or • to highlight and select PICTURE MODE settings. 2. Press EXIT

• "-""_Push to open the Front Control Panel Door Front Control Panel Buttons & Connections MENU VOL- VOL+ OH- CH÷ INPUT _ELECT q b 2 £ EXiT L _ - -- CURSOR _PUT 5 5=W_3_50 PH37381 @ 0 0 0 O O MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serv

• Hitachi 62VS69 - UltraVision VS69 Series, YourHITACHILCDRearProjectionTVincorporatesTwo Tunertechnologydesignedforimprovedviewing enjoyment.ThisTwoTunerfeatureallowsyoutoview _m_:_ antennainputsonboththemainpictureandsub-pictureCon,_otth_ simultaneously,withseparatetuningcontrolforeach. CabEeand/or Air cables When a DIGITAL channel is viewed as the main picture, / a DIGITAL channel can not be viewed as a sub picture, miami} When an ANALOG channel or INPUT is viewed as the main picture, an ANALOG channel or INPUT can not be viewed as a sub picture. To select between main picture and PIP sub-picture tuning, use the CURSOR buttons on the remote. The green highlighted channel display will mov

More Instructions:

Hitachi 62VS69 - UltraVision VS69 Series Operating manual 31-07-2023 72

DOWNLOAD

Related Products and Documents (LCD TV):

Comparable Devices:

Similar Resources:

• THOMSON LCD02TC (43 pages) SERVICE MANUALDOCUMENTATION TECHNIQUETECHNISCHE DOKUMENTATIONDOCUMENTAZIONE TECNICADOCUMENTACION TECNICANo copying, translation, modification on other use authorized. All rights reserved worldwide. • Tous droits de reproduction, de traduction, d'adaptation et d'exécution réservés pour tous les pays. • Sämtliche Urheberrechte an diesen Texte …

• Toshiba 32HLX95 (102 pages) (E) 32/37HLX95 *Web 213 : 27632HLX9537HLX95© 2005 TOSHIBA CORPORATIONAll Rights ReservedOwner’s RecordThe model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.Model number: Serial number:LCD TV/ …

• Samsung S9c (55 pages) Thank you for purchasing this Samsung product.To receive more complete service, please registeryour product atwww.samsung.com/registerIf you have any questions or comments relating to Sansung products, please contact the SAMSUNG customer care center. …

• Sony KLV-23HR1 (1 pages) MODEL:DESCRIPTION:DIMENSIONS(WHD):WEIGHT:DESCRIPTION:DIMENSIONS(WHD):WEIGHT:POWERREQUIREMENTS:POWERCONSUMPTION:Features and specifications subject to change without notice. • Non-metric weights and measurements are approximate.NOTE:WHERE THERE ARE CLOSE TOLERANCES INVOLVED IN CABINET BUILDINGOR APPLICATIONS WHICH REQUIRE A GREAT DEGREE OF PRECISION WER …

• Toshiba 32R3500P (168 pages) SERVICE MANUAL LCD Color Television32R3500PVer. 2.02This model is classified as a green product (*1), as indicated by the underlined serial number. This Service Manual describes replacement parts for the green product. When repairing this green product, use the part(s) described in this manual and lead-free solder (*2). For (*1) and (*2), refer to GREEN PRO …

• NEC MultiSync V552 (4 pages) Commercial-Grade LCD Displays for the Cost-ConsciousLarge-Screen LED LCDNEC V SERIESMaximum Message. Minimal Expense.Commercial-GradePromote extended use with a high-performance design • LED backlighting delivers both environmental and economic benefits* • Temperature sensors and fans protect the panel from damage • High definition, high brightness and …

Comments, Questions and Opinions: