Manualios.com

Star Micronics lC-10 Operation & User’s Manual

Star Micronics lC-10 Manual Online:

3.1, 2267 votes
Star Micronics lC-10 User Manual
Star Micronics lC-10 User Guide
Star Micronics lC-10 Online Manual

Text of Star Micronics lC-10 User Guide:

  • Expanded printing Mode ASCII Decimal Hexadecimal <ESC> “W” “ I ” 21 81 49 1B 57 31 Both <ESC> “W” Cl> 27 87 1 IB 57 01 Causes subsequent characters to be expanded to double width. Cancel expanded printing Mode ASCII Decimal Hexadecimal <ESC> “W” “0” 27 87 48 1B 57 30 Both <ESC> “w�

  • Star Micronics lC-10, Line feed Mode ASCII Decimal Hexadecimal Both <LF> 10 OA Prints the current line and feeds the paper to the next line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing. Reverse line feed Mode ASCII Decimal Hexadecimal Both <ESC> <LF> 27 10 IB OA Prints the current line and feeds the paper in the reverse direction to the - preceding line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing. Ig

  • Star Micronics lC-10, A few installation programs may ask you not to select a printer but to describe what your printer can do. The answers to the most often asked questions are: Yes, this printer can do a backspace; and Yes, it can do a hardware form feed. Selecting (or describing) a printer is the main step in the installation process and frequently the only step necessary. If you selected this printer or any Star, Epson or IBM printer you should be able to use software commands for all the standard printer functions, including bold or dou- ble-strike printing, underlining, subscripts, superscript

  • Star Micronics lC-10, “” ..-” .; ‘. L, L L. LC-10 MULTI-FONT f. REFERENCE CARD L POWER-UP FUNCTIONS In addition to their normal functions, all the control panel switches have special functions that operate if you hold them down while switching power on. L L L I O-POWER ON LINE t ORATOR c I I. stay I” panel style Long k51 Hexadecimal dump I I SWITCH COMBINATION FUNCTIONS 1 Several additional functions can be obtained by pressing the control panel switches in combinations. 1 Reverse micro-feed Clearing the buffer 1 PiPa - L...,.. 0 q q 3 COURIER SANSERIF ORATOR PITCH FEED rPAPER

  • Star Micronics lC-10, C hapter I SETTING UP THE PRINTER Subjects covered in Chapter 1 include - l Locating the printer l Unpacking and inspection (names of parts) 0 Setting up l Loading single sheets l Loading and parking fanfold forms l Test printing a Adjusting the printing gap l Setting the DIP switches LOCATING THE PRINTER Give some thought to the best place to put the printer. Both the printer and computer should be used in a normal indoor environment. For best performance, we recommend: l Place the printer on a

  • Star Micronics lC-10, lever Figure l-10. Opening the sprocket covers to expose the sprocket teeth Figure i-11. Closing the sprocket covers 10. Fit the holes the paper the sprocket Check that paper is 11. Close sprocket covers l-l 1). Raise one the clamp to lock sprocket unit place. 10

  • Star Micronics lC-10, Special features Panel pitch/style lock-in Forward and reverse micro-feed Paper parking Hexadecimal dump H Dot Matrix Size Character matrix Bit-image graphics 9 x 9 dots (Draft pica) 18 x 23 dots (Courier and Orator pica) 18 x 18 dots (Sanserif pica, elite) 12 x 11 dots (IBM block graphics, pica) 18 x 19 dots (Courier and Orator elite) 18 x 12 dots (Condensed pica) 18 x 10 dots (Condensed elite) 8 x 480 dots at 60 dpi (Single density) 9 x 480 dots at 60 dpi (Single density) 8 x 576 dots at 72 dpi (Plotter

  • rrgure r-0. Loaomg a smgle sneer Manual loading It is also possible to load paper manually while the printer’s power is off. The procedure is: 1. Check that printer power is off and the release lever at the back of the printer is down. 2. Insert a single sheet of paper into the entry slot as far as it will go, the same way as for sem

  • Star Micronics lC-10, Insulation resistance Dielectric strength 10 megohms between AC power line and chassis Withstands 1 kVAC rms at 50 or 60 Hz between AC power line and chassis for at least 1 minute n Environmental Requirements Operating temperature 5 to 40°C (41 to 104°F) Operating humidity 10% to 80% (no condensation) Storage temperature - 30 to 65°C (- 22 to 149°F) Storage humidity 10% to 95% (at 40°C) (no condensation) n Option Automatic sheet feeder n interface Signals Pin No. Signal Name

  • Star Micronics lC-10, Long test pattern: Paper Feed switch If held down during power-up, this switch prints a long test pattern. The test cycles endlessly. To stop the test you must switch power off. Stay ifs panel pitch: Print Pitch switch By holding this switch down during power-up, you can prevent software interference with the print pitch selected from the control panel. You will hear an acknowledging beep as power comes on. After the beep tone, you can set the printer off-line, select a print pitch, then retur

  • Star Micronics lC-10, 1490 LPRINT E$;"A";CHR$(I); 1500 LPRINT E$;" ";CHR$(I); 1510 LPRINT "THE SPACINGS ARE CHANGED" 1520 NEXT I 1530 LPRINT E$;"aO" 'Left justify 1540 LPRINT E$;"3";CHR$(36): 'Set l/6" line spacing 1550 LPRINT E$;" ";CHR$(O); 'Normal character space 1560 LPRINT :LPRINT 1570 LPRINT C$;"Other features:" 1580 LPRINT H$;E$;"E";"Emphasized";E$;"F";", "; 1590 LPRINT E$;"G";"Double-strike";E$;"H";"," 1600 LPRINT H$;E$;"-l";"Underlining";E$;"

  • Star Micronics lC-10, Select double or quadruple size 1 Mode ASCII Decimal Hexadecimal Both <ESC> “h+’ II 27 104 n 1B 68 n Selects the size of subsequent characters as shown below. Extra-high characters align along the cap-line of normal characters, with the base line temporarily moving down. Line spacing is temporarily doubled when n = 1, 5 or 6 and quadrupled when n = 2. To print correctly when n = 3,4, 5 or 6, set the line spacing to 24/216 (l/9) of an inch with < ESC > “3�

  • Star Micronics lC-10, Appendix C DOWNLOAD CHARACTER GENERATOR 91 Draft character NLQ character Appendix D CHARACTER SETS 99 Standard character set 100 IBM character set #2 102 IBM character set #l 104 Additional character set 105 International character sets 106 INDEX 107 REFERENCE CARD Inside the cover

  • TECHNICAL SPECIFICA T/O/US n Printing Mechanism Printing method Printing speed Printing direction Print head Serial impact dot matrix 120 characters per second (draft pica) 30 characters per second (NLQ pica) Draft: bi-directional or unidirectional (selectable), logic seeking NLQ and graphics: unidirectional, logic seeking 9 Pins Life: 200 million do

  • Star Micronics lC-10, The Orator style is unique in two ways. First, it is a dot larger (higher) than the other styles. This makes it a good choice for labels and other text requiring high visibility. A little extra line spacing helps when Orator is used. Second, there are two versions of the Orator type style: one prints small capitals in place of lower-case letters; the other prints lower-case letters, but without descenders. The version you get when you select Orator from the control panel depends on the

  • Star Micronics lC-10, ‘c L- L c. L immediate print Mode ASCII Decimal Hexadecimal < ESC , “i” “ 1 3, 27 105 49 1B 69 31 Both -c ESC > “i” Cl> 27 105 1 1B 69 01 Selects the immediate print mode, in which the printer prints each character as soon as received. At every pause in the incoming data stream the printer scrolls the paper up about 2 inches so that the current line can be seen. When the next character is received the paper is scrolled back down and printing continues. This command is ignored when friction feed is used.

  • Star Micronics lC-10, COMMAND SUMMARY IN NUMERIC ORDER MODE CONTROL CODE FUNCTION PAGE IBM STD STD STD IBM STD IBM STD IBM IBM <BEL> CBS> <FIT> cLF> <VT> <FF> <CR> <so> < SI > <DCl> CDC2> <DC2> <DC3> <DC4> <CAN> <DEL> <ESC> <LF> <ESC> <FF> <ESC> <so> <ESC> <SI> <ESC> <EM> <O> <ESC> <EM> <4> < ESC > < EM > “R” < ESC > < EM > “T” II <ESC> ““n

  • Star Micronics lC-10, ‘ I’NU3 -..I -b-l@-lpI‘-lP--l 0 [ 128 1144 ( 160 [ 176 I192 ( 208 1224 1240 1 cDCl> I - 1 A f2 a q 129 145 161 177 193 209 225 241 <DC2> ‘1 2 p30 2 B R b r Hexa- 8 decimal 9 A B C D E F 146 162 178 j-- 194 210 226 242 3 131 ( 147 1163 (179 I195 211 227 pG- 4 <DC4> $ 4 D T d t 132 148 164 180 196 212 228 244 D ) 141 ) 157 1173 ) 189 1205 1221 ) 237 1253 E <so> . > N A n - 142 158 174 190 206 222 238 254 F <!a> / ? 0 0 <DEL> 1 l-is l-i%- hi l-F-1223 )239 1255 101

  • Star Micronics lC-10, ‘gure 7-7. Mounting the paper guide for single sheets Semiautomatic loading Single sheets can be loaded manually with power off, or semiauto- matically with power on. We will start the easy way with semiautomatic loading. 1. Check that the release lever is down and the bail lever back (bail closed), then switch power on. You will hear a short beep tone and the Power indicator on the control panel will flash. These are the printer’s paper-out signals. 2. Place a single sheet on the paper guide and insert it down into the entry slot. You will feel a slight

  • Star Micronics lC-10, Type styles are: 12 y ;Y) .j:: ,k. i:z !,? a y a (.:: t; fc> y .s p Courier characters, Sanserif characters, ORATOR WITH SMALL CAPITALS, OR with lower case characters, and 1 TAL 1~s for a 1 1 5 it: y.1 ti?.s u Print pitches are: Pica pitch, Elite pitch, Condensed pica pitch, Condensed elite pitch, proportional spacing for all pitches, Quad- sized m Various line and character spacings: THE SPACINGS THE SPACINGS ARE CHANGED Other features: Emphasized, Double-strike, Underlininq, Overllnlng, BUPERSCRIPT BUBSCRXPT, Download ch:racters: c: c.a I:.::, I:::) i2.i $@&&& Dot graphics:

  • 2030 LPRINT D$;E$;":"; CHR$(O);CHR$(O);CHR$(O); 2040 LPRINT E$;"&";CHR$~O~;CHR5~6O~;CHR5~60~~ 2050 RESTORE 2520 2060 FOR M=O TO 11 2070 READ MM 2080 LPRINT CHR$(MM) 2090 NEXT M 2100 RETURN 2110 ' 2120 1 Define NLQ download character 2130 LPRINT C$;E$:":": CHR$(O);CHR$(O);CHR5(0); 2140 LPRINT E$;"&&qu

  • Star Micronics lC-10, Select draft elite download character set Mode ASCII Decimal Hexadecimal <ESC> “I” ‘. ” S 21 13 53 1B 49 35 IBM < ESC > “I” <5> 27 13 5 IB 49 05 Selects the download character set, draft quality, and elite pitch (12 cpi). Ignored if the NLQ Type Style switch was pressed during power-up or if DIP switch 2-l is ON. Select NLQ download character set Mode ASCII Decimal Hexadecimal <ESC> “I” “6” 27 73 54 IB 49 36 IBM < ESC > “I�

  • Star Micronics lC-10, L Figure 7-T. Check to make sure you have all five items: knob, 4) Ribbon cartridge, and 5) User’s manual. 1) Printer, 2) Paper guide, 3) Platen Make an external inspection of the printer. Note the locations of the following parts: Bail lever: opens and closes the paper bail which holds the paper against the platen. 2 - -

  • IBM CHARACTER SET #l Other characters are identical to IBM character set #2. The duplication of control codes enables systems with a ‘-bit interface to obtain control functions when the most significant bit is set to 1 by the <ESC> “ > ” command. 104

Related Products and Documents (All in One Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Simplicity H924RX Operator's manual simplicity/h924rx-6NH.pdf 24 Aug 2022 94 7.45 Mb
2 Kaito KA009 Operation manual kaito/ka009-9Z5.pdf 23 May 2023 6
3 Gen16 AE Advanced user's manual gen16/ae-368.pdf 30 Jun 2022 33
4 Creda 793415 Owner's manual creda/793415-WA9.pdf 10 Aug 2023 2 0.29 Mb
5 Acer LCD monitor Quick start manual acer/lcd-monitor-671.pdf 26 Aug 2022 12 11.73 Mb
6 Toshiba 40RV52R Specifications toshiba/40rv52r-G8B.pdf 19 Feb 2024 2 0.48 Mb

Similar Resources:

  • Sharp

    MX-M260

    (172 pages)
    ENGLISHSOFTWARE SETUP GUIDE(for network printer)PRINTER EXPANSION KITESPAÑOLFRANÇAISPORTUGUÊSMX-PB12KIT DE EXPANSIÓN PARA IMPRESORAGUÍA DE INSTALACIÓN DE SOFTWARE(para la impresora de red)KIT IMPRIMANTEKIT DE EXPANSÃO PARA IMPRESSORAGUIDE D'INSTALLATION DU LOGICIEL(pour imprimante réseau)MANUAL DE CONFIGURAÇÃO DO SOFTWARE(da impressora de rede …
  • Fuji Xerox

    DocuCentre-III 3007

    (44 pages)
    This User Guide is printed on FUJI XEROX Office Color Capable Products.FeaturesQuick User Guide Quick User Guide DDocuocuCCentreentre--III 3007/2007III 3007/2007CopyFaxScanPrintPaper JamsConsumablesTroubleshooting …
  • Epson

    Artisan 800

    (2 pages)
    • Ultra fast print speeds —upto38ppm(black/color); photosinasfastas10sec1• Smart, 7.8" touch panel —largedisplaylightsupthe buttonsyouneed;includesa3.5"LCDtopreviewand printimages• Wi-Fi support —built-inwiredand …
  • Ricoh

    D104

    (43 pages)
    Content ID# rfg047077 Ver.1.5 Page 1 of 43 12/9/2011 Subject to change without notice RICOH Americas Corporation Product Support Guide Model D104/D106 Introduction Model Type Color MFP Launch Date 2/1/2011 S/N Configuration V97/V98 Product Code D104/D106 Brand/Model Name Product Code Lanier Ricoh Savin Gestetner D104 LD 620C MP …
  • Epson

    TM-T88IV

    (8 pages)
    1User’s ManualAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information …
  • Epson

    XP-4100

    (4 pages)
    Start Here9 Follow the on-screen instructions to adjust the print quality of your product.Note:• You need to load paper before you can adjust the print quality. See “Load paper” below for details.• Select Adjust Later if you want to adjust the print quality later. For more information, see the online User’s Guide.4 Load paperSee the online U …

Comments, Questions and Opinions: