Manualios.com

Hitachi HTADD3WAU Instruction Manual

Hitachi HTADD3WAU Manual Online:

3.85, 2498 votes
Hitachi HTADD3WAU User Manual
Hitachi HTADD3WAU User Guide
Hitachi HTADD3WAU Online Manual

Text of Hitachi HTADD3WAU User Guide:

  • Hitachi HTADD3WAU, Before operating please read all these instructions thoroughly. Bitle lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme sorglälting durch. Veuiltez lire ces instructions dans le detail avant de meltre l’appareil en fonction. Antes de ponerio en funcionamiento lea la totalidad de estas instrucciones. Prima dell’uso, leggere attentamente le seguenti istruzioni. Lees deze gebruiksaanwijzing aandachtig door alvorens dit toestel in gebruik te nemen. Läs dessa anvïsningar noga, innan du borjar att använda apparaten. Læs venligst instr

  • Hitachi HTADD3WAU, 2 ENGLISH TABLE OF CONTENTS • Accessories ............................................... 2 • Cautions on Installation ............................. 2 • Connections .......................................... 3~6 • Part Names and Functions ....................... 6 • Remote Control Unit ................................. 7 • Setting up the System ......................... 7~11 • Operations ........................................ 11~13 • Using the Surround Function ............ 13~18 • Listening to the Radio ....................... 19~22 • Last Function Memory ............................ 22 • Initialization of the Microprocessor .......... 22 • Troubleshooting ......

  • Hitachi HTADD3WAU, 3 ENGLISH Connecting the audio components • Do not plug in the power cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Note that binding pin plug cords together with power cords or placing them near a power transformer will result in generating hum or other noise. • Noise or humming may be generated if a connected audio equipment is used independently without turning the pow

  • Hitachi HTADD3WAU, 4 ENGLISH Connecting the video equipments VIDEO IN R L OUT IN S VIDEO OUT IN AUDIOAUDIO OUT RL AUDIO R YCBCR L OUT AUDIO DIGITAL OUT OPTICAL VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT YCBCR VIDEO IN S VIDEO IN COMPONENT VIDEO IN AUDIO R YCBCR L OUT AUDIO DIGITAL OUT OPTICAL VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT MONITOR OUT • Connect the TV’s video input jack (VIDEO INPUT) to the VIDEO MONITOR OUT jack using a 75 Ω/ohms video coaxial pin plug cord. DVD player TV or DBS tuner output Video deck AUDIO IN AUDIO OUT VIDEO OUT AUDIO OUT VIDEO OUT VIDEO IN NOTE Please connect

  • 5 ENGLISH Speaker system connections Speaker impedance • When speaker systems A and B are used separately, speakers with an impedance of 6 to 16 Ω/ohms can be connected for use as front speakers. • Be careful when using two pairs of front speakers (A + B) at the same time, since use of speakers with an impedance of 12 to 16 Ω/ohms. • Speakers with an impedance of 6 to 1

  • Hitachi HTADD3WAU, 6 ENGLISH NOTE • Protector circuit This unit is equipped with a high–speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short- circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cut off and the power sup

  • Hitachi HTADD3WAU, 7 ENGLISH ENTER SET UP SYSTEM SURROUND NEXT • REMOTE CONTROL UNIT FUNCTION selector button System buttons (TAPE, VCR) SYSTEM (SYSTEM SET UP) button Test tone button Surround mode selector button Channel select button System buttons (CD, MD, DVD) MD DVD DVDTV A/B HTA MD/TAPE TAPE / VCR CD/MD/DVD FUNCTION MD/ TAPE MON POWER VCR VCR TAPE CD PRESET GROUP CHANNEL CHANNEL DISPLAY ENTER SET UP SYSTEM SURROUND TV INPUT VOLUMECHANNEL T.TONE CH SELECT VIDEO SELECT STATUS SURR.MODE REMOTE CONTROLLER RB - DD1 MUTING CH VCL TV AUDIO TITLE MENU NEXT MASTER VOL Mode selector switch POWER buttons MD/TAPE MONITOR button Preset memory

  • Hitachi HTADD3WAU, 8 ENGLISH Subwoofer Center speaker system Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the screen as possible. Surround speaker systems 1 Check that all the components are correct, then press the POWER operation switch on the main unit or the POWER button on the remote control unit to turn on the power. 2 Press the SYSTEM button to enter the setting. 3 Press the NEXT button to switch to the speaker configuration set up. NOTE: Press the SYSTEM button agai

  • Hitachi HTADD3WAU, 9 ENGLISH Setting the delay time Input the distances from the listening position to the speakers and set the surround delay time. Preparations: Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right). L1: Distance from center speaker to listening position L2: Distance from front speakers to listening position L3: Distance from surround speaker to listening position NOTES: • Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer, or so that the difference in distance (L2 – L1) is 1.5 meters or less. • Set the surround speakers (left and right) at the same

  • Hitachi HTADD3WAU, 10 ENGLISH Operating Audio/Video components stored in the preset memory Audio/Video components stored in the preset can be controlled using this unit’s remote control unit. Note that some components Audio/Video components stored in the preset memory, however, cannot be operated with this remote control unit. 1 Set the slide switch to the position for the component to be operated. 2 Use the buttons shown below to operate the audio component. For details, refer to the respective component’s manual. a. For DVD pla

  • Hitachi HTADD3WAU, 11 ENGLISH “VCR”“TV” HITACHI A – MITSUBISHI A PANASONIC A JVC A SONY A PIONEER TOSHIBA A SANYO A SHARP A NEC A PHILIPS A RCA A GENERAL ELE. A MAGNAVOX A HITACHI B – MITSUBISHI B PANASONIC B JVC B SONY B – TOSHIBA B SANYO B SHARP B NEC B PHILIPS B RCA B GENERAL ELE. B MAGNAVOX B – – MITSUBISHI C PANASONIC C JVC C SONY C – – – – NEC C PHILIPS C – – MAGNAVOX C HITACHI – MITSUBISHI A PANASONIC A JVC SONY PIONEER TOSHIBA SANYO SHARP NEC PHILIPS RCA GENERAL ELE. A MAGNAVOX – – MITSUBISHI

  • Hitachi HTADD3WAU, 12 ENGLISH Playing the analog program source 1 Press the button for the program source to be played. EX 1: CD or press the FUNCTION button repeatedly until the desired source (CD) appears on the display. The function switches in the following order each time the FUNCTION button is pressed: EX 2: MD/TAPE • Press the button once to switch the source to MD/TAPE input, again to cancel MD/TAPE input. 2 Select the ANALOG input mode. Check that the “ANALOG” indicator is lit. 3 Start playback on the selected component. For operating instructions, refer to the various components manuals. 4 Adjust the

  • 13 ENGLISH Using the muting function Listen with headphones 1 Press the MUTING button. • Cancelling MUTING mode. Press the MUTING button again. • Caution: Switching off the power of the unit and the remote control unit will cancel the settings. 1 Connect the headphones to the headphones jack of the front panel. 2 Press the SPEAKER A or B button to turn the speaker off. Use this to turn of

  • Hitachi HTADD3WAU, 14 ENGLISH Using surround system with analog input 1 Press the button for the program source to be played. EX: CD 2 Select the ANALOG input mode. Check that the “ANALOG” indicator lights up. 3 Select your preferred playback mode (see table below). 4 Start playback on the selected component. For operating instructions, refer to the various components’ manuals. 5 Check that the indicators for your selected playback light up. +- +- 5 3 2 DOLBY DIGITAL 1 CD FUNCTION INPUT MODE Input Mode Playback Mode To select : Press Display STEREO DOLBY/DTS SURROUND DSP SI

  • Hitachi HTADD3WAU, 15 ENGLISH Input Mode Playback Mode To select : Press Display DOLBY DIGITAL (2 ch) STEREO PRO LOGIC Indicators LOCK DIGITAL PRO LOGIC DIGITAL STEREO DOLBY DIGITAL STEREO STEREO LOCK DTS DIGITAL LOCK LOCK LOCK DOLBY DIGITAL DTS (CD playback) DTS LOCK DTS LOCK DTS DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DTS (DVD playback) Using the Dolby Pro Logic mode Play a pre-recorded source with the mark. 1 Press the button for the program source to be played. 2 Set the Dolby surround mode. 3 Start playback on the selected component. For operati

  • 16 ENGLISH Using the Dolby Digital mode 1 Press the DVD button. 2 Select the DIGITAL input mode. 3 Set the DOLBY surround mode. 4 Start playback on the selected component. For operating instructions, refer to the various components’ manuals. • The PRO LOGIC indicator lights when a 2-channel Dolby Digital signal is input. Play a pre-recorded source (DVD) with the mark. 5 A

  • Hitachi HTADD3WAU, 17 ENGLISH 1 Press the DVD button. EX.: DVD 2 Select the DIGITAL input mode. 3 Set the DTS mode. 4 Start playback on the selected component. For operating instructions, refer to the various component’s manuals. 5 Adjust the MASTER VOLUME control. Using the DTS mode Play a pre-recorded source with mark. 1 5 3 +- +- 23 1 5 DOLBY DIGITAL MD DVD DVDTV A/B HTA MD/TAPE TAPE / VCR CD/MD/DVD FUNCTION MD/ TAPE MON POWER VCR VCR TAPE CD PRESET GROUP CHANNEL CHANNEL DISPLAY ENTER SET UP SYSTEM SURROUND TV INPUT VOLUMECHANNEL T.T ON E CH SELECT VIDEO SELECT STATUS SURR.MODE REMOTE CON

  • 18 ENGLISH 1 Select the surround mode according to the input source. The surround mode switches in the following order each time the DSP SIMULATION button is pressed: 2 Set the surround parameter according to the source and adjust the tone. First press the SURROUND button. Then press the NEXT button to switch to the various settings as follows. • DSP: MATRIX mode [ skip to step 5 • DSP:

  • Hitachi HTADD3WAU, 19 ENGLISH • LISTENING TO THE RADIO Auto preset memory This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. 1 Switch on the unit using the main unit’s power operation switch while holding in the GROUP button. The unit automatically begins searching for FM broadcast stations. 2 When the first FM broadcast station is found, that station is stored in the preset memory at channel A1. Subsequent stations are automatically stored in order at preset channels A2 to A8, B1 to B8, C1 to C8, D1 to D8 and E1 to E8, for a maximum of 40 stations. 3 Chan

  • Hitachi HTADD3WAU, 20 ENGLISH 1 Press the MEMORY button. 2 Press the GROUP button and select the desired memory block (A to E). 3 Press the TUNING PRESET UP or DOWN button to select the desired preset channel (1 to 8). 4 Press the MEMORY button again to store the station in the preset memory. • To preset other channels, repeat steps 1 to 4. A total of 40 broadcast stations can be preset – 8 stations (channels 1 to 8) in each of blocks A to E. Preset memory Preparations: Use the “ Auto tuning” or “Manual tuning” operation to turn in the st

  • Hitachi HTADD3WAU, 21 ENGLISH RDS Search Use this function to automatically tune to FM stations that provide RDS service. 1 Set the input function to “TUNER”. 2 Press the RDS button until “RDS SEARCH” appears on the display. 3 Press the TUNING PRESET UP or DOWN button to automatically begin the RDS search operation. If no RDS stations is found with the above operation, all the reception band are searched. 4 When a broadcast station is found, that station's name appears on the display. 5 To continue searching, repeat step 3. If no other RDS station is found when all the frequencies are searched, “N

  • Hitachi HTADD3WAU, 22 ENGLISH TP Search Use this function to find RDS stations broadcasting traffic program (TP stations). 1 Set the input function to “TUNER”. 2 Press the RDS button until “TP SEARCH” appears on the display. 3 Press the TUNING PRESET UP or DOWN button to automatically begin the TP search operation. If no TP station is found with the above operation, all the reception bands are searched. 4 The station name is displayed on the display after searching stops. 5 To continue searching, repeat step 3. If no other TP station is found when all the frequencies are searched, “NO TP” is displayed. TUNER FUNCTION DOWN CH TUNING PRESET UP CHANNEL RDS MD DVD DVDTV A/B HTA MD/TAPE TAPE / VC

  • 23 ENGLISH Symptom DISPLAY not lit and sound not produced when power switch set to on. DISPLAY lit but sound not produced. DISPLAY is not displayed and the “ON/STANDBY” led flashes at a high rate. Sound produced only from one channel. Positions of instruments reversed during stereo playback. Humming noise produced when record is playing. Howling noise produced when volume is hig

  • Hitachi HTADD3WAU, 24 ENGLISH • Audio section (Power amplifier) Rated output: Front: 80W + 80W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) Centre: 80W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) Surround: 80W + 80W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) SINUS power: Front: 90W + 90W (6 Ω/ohms, 1 kHz, 0.1 %) Centre: 90W (6 Ω/ohms, 1 kHz, 0.1 %) Surround: 90W + 90W (6 Ω/ohms, 1 kHz, 0.1 %) Output terminals: Front: A or B 6 to 16 Ω/ohms A + B 12 Ω/ohms or more Center/Surround: 6 to 16 Ω/ohms (Analog) LINE input Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 50 kHz: +1, –3 dB S/N ratio: 93 dB (I

  • Hitachi HTADD3WAU, Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: [email protected] HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: [email protected] HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Fe

More Instructions:

DOWNLOAD

Related Products and Documents (Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Chase VeriFone Omni Quick reference manual chase/verifone-omni-SXO.pdf 20 Jun 2022 16
2 Sony NWZA826KB Operation manual sony/nwza826kb-AJ5.pdf 16 Dec 2023 161 2.87 Mb
3 Sanyo POA-FBOX130 Install manual sanyo/poa-fbox130-HQA.pdf 09 Feb 2024 3 1.97 Mb
4 Casio QW-415 Manual  casio/qw-415-3T1.pdf 18 Aug 2022 1 0.16 Mb
5 Williams Sound WFM RX260 Manual and user manual williams-sound/wfm-rx260-N6A.pdf 25 May 2023 20
6 Samsung SGH-N620 Service manual samsung/sgh-n620-OQ9.pdf 19 Jan 2024 50

Similar Resources:

  • Comtech EF Data

    CMR-5975

    (122 pages)
    Copyright © Comtech EF Data, 2008. All rights reserved. Printed in the USA. Comtech EF Data, 2114 West 7th Street, Tempe, Arizona 85281 USA, (480) 333-2200, FAX: (480) 333-2161 CMR-5975 Digicast Media Router S2 Receiver CMR-5975 – MR-S2 Installation and Operation Manual Part Number MN-CMR5975-IOM Revision 3 October 7, 2008 …
  • Clarion

    DB178RMP

    (28 pages)
    All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.Printed in Malaysia / Imprimé en Malaisie / Gedruckt in Malaysia / Stampato in MalaysiaGedrukt in Maleisi / Impreso en Malasia / Tryckt i Malaysia / Impresso na Malásia PE-2934E PE-2935E280-8346-00Clarion Co., Ltd.CD/MP3/WMA RECEIVERRADIO CD/MP3/WMA CD/MP3/WMA-RECEIVERRICEVITORE PER CD/MP3/WMA CD/MP3 …
  • Vimar

    Elvox 46861.R01

    (4 pages)
    Manuale per il collegamento e l’usoInstallation and operation manual46861.R01Ricevitore attivo per conversione segnale video CAT5 UTPActive receiver for converting video signal CAT5 UTP …
  • Harman Kardon

    HK670

    (25 pages)
    HK670 Integrated Amplifier PRELIMINARY Service – Technical Manual Harman International SNC - Harman Consumer International 2, route de Tours 72500 Château du Loir FRANCE …
  • Icom

    IC-R5

    (80 pages)
    INSTRUCTION MANUALiR5COMMUNICATIONS RECEIVERThis device complies with Part 15 of the FCC rules. Operation is sub-ject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.New2001IC-R5_1.qxd 02.10.23 11:28 Page 1 …
  • Emtec

    Movie Cube K800

    (2 pages)
    K800Movie CubeMultimedia Player & Recorder with DVB-T tunerThe K800 is a the perfect multimedia HDD for your home entertainment !Not only does its high capacity HDD allow you to store, share and enjoy your photos, music, andvideos, but you can also watch and record your favorite TV programs anytime.Use your Movie Cube K800 as a Personal Video Recorder …

Comments, Questions and Opinions: