Philips Wireless Router SNB5600 Operation & User’s Manual

Text of Philips Wireless Router SNB5600 User Guide:

• Philips Wireless Router SNB5600, Table of contents 1 Table of contents 1 Important 2 1.1 Safety information 2 1.2 Network range & speed information 2 1.3 Conformity 2 1.4 Recycling and disposal 2 1.5 FCC Radiation Exposure Statement 2 1.6 Software licenses 2 1.7 Disclaimer 2 2 Your Wireless Router 3 2.1 What’s in the box 3 2.2 What else will you need 3 2.3 Overview of the front side of the wireless router 4 2.4 Overview of the rear side of the wireless router 4 3 Getting started 5 3.1 Install 5 3.2 Connect 5 3.3 Connection overview 6 3.4 Install a WiFi device 7

• Philips Wireless Router SNB5600, Important 2 1 Important Take time to read this user manual before you use your Wireless Router. It contains important information and notes regarding your Wireless Router. 1.1 Safety information Warning • This equipment must only be powered with the Power Adapter provided in the box. • For use only with power supply "Leader : 48090100-C5" and / or "DVE : DV-01AUP". • Always use the cables provided with the product. • Radio equipment for wireless applications is not protected against disturbance from other radio services. • Do not expose the system to excessive moisture, rain, sand or heat sources. • The product shou

• Philips Wireless Router SNB5600, Your Wireless Router 3 2Your Wireless Router Congratulations on your purchase and welcome to Philips ! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box Wireless Router Quick start guide Power adapter Installation CD ROM Ethernet cable (RJ-45) 2.2 What else will you need A desktop or a laptop with free A modem A web browser An Internet connection USB port and an Ethernet connector Quick start guide 1 2 3 Connect Install Enjoy SNB5600 W E B B R O W S E R

• Philips Wireless Router SNB5600, Your Wireless Router 4 2.3 Overview of the front side of the wireless router A ON : Power on, normal operation OFF : Power off or failure B ON : Wireless link is up Blinking : Send / Receive data OFF : Wireless disable or failure C ON : Internet connection is up Blinking : Data transfering OFF : Internet connection is down or failure D ON : WAN connection is OK Blinking : Send / Receive data OFF : Connection is not established E ON : Ethernet connection is established Blinking : Send / Receive data OFF : Connection is

• Philips Wireless Router SNB5600, Getting started 5 3 Getting started 3.1 Install Insert the installation CD into the PC’s CD ROM (or DVD ROM) drive • The installation program will start automatically Follow instructions on the screen Note If for some reason the installation does not start automatically : 1 Click on Windows START and then RUN 2Type explorer and navigate to the CD ROM (or DVD ROM) drive 3 Double-click on Setup.exe Tip By default, the language of your operating system will be choosen, but you have 10 seconds if you want to select another one. Click on the required language • The next screen will be displayed automatically Cli

• Philips Wireless Router SNB5600, Getting started 6 Connect this Ethernet cable to the LAN1 port Connect the other side of this Ethernet cable to your computer • light will turn on Note Depending on your modem settings, you might have the following screen displayed. Fill in the fields using the information provided by your Internet Service Provider (ISP) Then click on Continue • A progress bar screen will be displayed, your settings will be saved and you will be connected to Internet • Once the installation completed, the following screen wil

• Philips Wireless Router SNB5600, Getting started 7 3.4 Install a WiFi device If you want to install a WiFi device you have to retrieve your wireless security settings using your installation CD ROM on the computer where you installed your gateway and by clicking on the security icon of the menu page. 3.4.1 Install a Wireless USB adapter SNU5600 If you have bought the starter kit SNK5600, the Wireless USB adapter SNU5600 is part of the box content. In that case you just have to insert the installation CD ROM, provided with your SNK5600, and follow the instructions on the screen. You can either install your Wireless USB adapter on the same PC than the Wireless Rou

• Philips Wireless Router SNB5600, Configuring the Wireless Router 8 4 Configuring the Wireless Router Advanced users may want to change the configuration of their Wireless Router. This chapter explains how to access the configuration webpages, show you the struture of these webpages and it describes them. 4.1 Log on the webpages Open your Internet Browser Enter http://192.168.1.2 in the address field Click on GO • The following webpage will be displayed Note The only default language is English. To access the required webpage, click on the corresponding tab on the left side of the page 4.2 Webp

• Philips Wireless Router SNB5600, Configuring the Wireless Router 9 4.3.2 Password Settings Use this page to change the password for accessing the management interface of the Wireless Router. Passwords can contain from 3-12 alphanumeric characters and are case sensitive. Note If you lost the password, or you cannot gain access to the user interface, press the reset button on the rear panel, holding it down for at least five seconds to restore the factory defaults. By default, there is no password to login to the user interface. Warning When you reset the Wireless Router using the reset button, all configuration settings will be lost, also your ISP setting (Internet Service Provider). Enter a maximum Idle Time Ou

• Philips Wireless Router SNB5600, Configuring the Wireless Router 10 4.4.3 Static IP Address Your ISP provides a static IP address to access Internet services. 4.4.4 Clone MAC Address Some ISP’s require you to register your MAC address with them. If you have done this, the MAC address of the router must be changed to the MAC address that you supplied to your ISP. 4.4.5 DNS Domain Name Servers (DNS) are used to map a domain name (e.g., www.philips.com) with the IP address (e.g., 64.147.25.20). The DNS address is usually configured automatically. If this is not the case, one or more DNS address will be provided to you by your ISP. However, if there is a DNS server that you would rather use, you need to spe

• Configuring the Wireless Router 11 4.6.2 Access control Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN interface. The default is to permit all outgoing traffic. 4.6.3 Security The router can transmit your data securely over the wireless network. Matching security mechanisms must be setup on your router and wireless c

• Philips Wireless Router SNB5600, Configuring the Wireless Router 12 4.7.1 Address Mapping Allows one or more public IP addresses to be shared by multiple internal users. This also hides the internal network for increased privacy and security. Enter the Public IP address you wish to share into the Global IP field. Enter a range of internal IPs that will share the global IP into the "from" field. 4.7.2 Virtual server If you configure the Wireless Router as a virtual server, remote users accessing services such as web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In

• Philips Wireless Router SNB5600, Configuring the Wireless Router 13 Network attacks that deny access to a network device are called Denial-of-Service (DoS) attacks. DoS attacks are aimed at devices and networks with a connection to the Internet. Their goal is not to steal information, but to disable a device or network so users no longer have access to network resources. The Wireless Router firewall function protects against the following DoS attacks : IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. The firewall does not significantly affect

• Philips Wireless Router SNB5600, Configuring the Wireless Router 14 RIP Defect (Default : Disabled) - If an RIP request packet is not acknowledged to by the router, it will stay in the input queue and not be released. Accumulated packets could cause the input queue to fill, causing severe problems for all protocols. enabling this feature prevents the packets from accumulating. Discard Ping to WAN (Default : Disabled) - Prevent a ping on the Wireless Router’s WAN port from being routed to the network. Scroll down to view more information. Stateful Packet Inspection This is called a "Stateful" packet

• Configuring the Wireless Router 15 4.11 TOOLS Use the Maintenance menu to backup the current configuration, restore a previously saved configuration, restore factory settings, update firmware, and reset the Wireless Router. 4.11.1 Configuration Tools Choose a function and click "Next>>". "Backup" allows you to save the Wireless Router’s configuration to a file. &quo

• Philips Wireless Router SNB5600, Configuring the Wireless Router 16 4.13 SET UP WIZARD 4.13.1 Getting started Make sure the router is connected correctly. For a detailed description, refer to the user manual. This can be found on the Installation CD provided. 4.13.2 Time zone This page allows you to configure the local time zone and automatic time maintenance. Automatic time maintenance synchronizes the router with a public time server on the Internet. 4.13.3 Wireless settings In step 2 you can change the Wireless settings of the Wireless Router. For easy installation it is advi

• Technical data 17 5 Technical data Ports • Four 10/100Mbps Rj-45 Ports Management Features • Firmware upgrade via web based management • Web based management (configuration) • Power indicators • Event and history logging • Network ping Security Features • Password protected configuration access • User authentication (PAP/CHAP) with PPP • Firewall NAT NAPT • VPN pass through (I

• Frequently asked questions 18 6 Frequently asked questions In this chapter you will find the most frequently asked questions and answers about your Wireless Router. Set-up I cannot connect using the Web browser • Check that you have a valid network connection to your Wireless Router • Check all parameter settings with your Internet provider • Check Internet Explorer* configuration : -

• Philips Wireless Router SNB5600, Copyright © 2007 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Specifications are subject to change without notice. Document order number : 3111 285 43951

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• Weidmuller IE-SW-AL08M-8GT (209 pages) Industrial Ethernet managed Switches Manual for Gigabit Advanced Line Switches IE-SW-AL08M-8GT (2682350000) IE-SW-AL12M-8GT-4GESFP (2682340000) IE-SW-AL14M-12GT-2GESFP (2682360000) IE-SW-AL24M-16GT-8GESFP (2682370000) IE-SW-AL08M-8GTPoE (2682420000) IE-SW-AL06M-4GTPoE-2GESFP (2682430000) Second …

• Reliance EC5805 (29 pages) Thank you for choosing the Reliance EC5805 Wi-Fi Router (EC5805).Note: Supported functions and actual appearance depend on the specific models you purchased. The following illustrations are provided for your reference only. For details about the model you selected, consult your service provider. This guide briefly describes the functions of the EC5805. …

• Cisco MERAKI MS450 Series (22 pages) MS450 Series Installation GuideAbout this GuideThis guide provides instruction on how to install and configure your MS450 series switch. This guide also provides mounting instructions and limitedtroubleshooting procedures. For more switch installation guides, refer to the switch installation guides section on our documentation website.ModelsModel number Desc …

• 3Com OfficeConnect 3C1670800 (4 pages) 1• 10/100 or 10/100/1000autosensing capability on allswitch ports automaticallydetects the speed of theattached device to optimizenetwork performance• Plug-and-play convenience, theswitches work right out of thebox with no configuration ormanagement necessary• Auto MDI/MDIX on all switcheseliminating most commoncabling errors3Com®OfficeConnect®Switch …

• Hirschmann HiSecOS EAGLE20 (532 pages) RM GUI HiSecOS EAGLE20/30Release 3.0 09/2015Technical Supporthttps://hirschmann-support.belden.eu.comReference ManualGraphical User InterfaceHiSecOS EAGLE20/30 (Industrial ETHERNET Firewall) …

• Vodafone MachineLink 3G (2 pages) 30mm103mm140mmWeight: 180gMounting optionsThe Vodafone MachineLink 3G can be installed quickly and easily in a variety of locations. DescriptionOption 1Mount at against the wallOption 2Mount perpendicular to the wallOption 3Mounted via DIN rail bracketC Section DIN rail mountSlide onto a railTop hat DIN rail mount Mount on a bracket and slide onto a railD …

Comments, Questions and Opinions: