Manualios.com

Philips 0150-0241 Operation & User’s Manual

Philips 0150-0241 Manual Online:

3.05, 2221 votes
Philips 0150-0241 User Manual
Philips 0150-0241 User Guide
Philips 0150-0241 Online Manual

Text of Philips 0150-0241 User Guide:

  • Philips 0150-0241, Philips ProBridge 2 0150-0241B © 2004 GE Security All Rights Reserved. Any GE Security software supplied with GE Security products is proprietary and furnished under license and can be used or copied only in accordance with the terms of such license. This document contains proprietary information that is protected by copyright. No part of this document may be reproduced or transmitted in any form or by any means without the prior written permission of GE Security. The information contained in this document is subject to change without notice. GE Security in keeping pace with technological advances, is

  • Philips 0150-0241, Philips ProBridge 3 0150-0241B Table of Contents 1 Philips ProBridge ........................................................... 4 1.1 Philips ProBridge Description.................................................................. 4 1.2 Compatibility ............................................................................................. 4 1.3 Installation Environment........................................................................... 4 1.4 Pow

  • Philips 0150-0241, Philips ProBridge 4 0150-0241B 1 Philips ProBridge 1.1 Philips ProBridge Description The Kalatel CBR-PB2-PHILIPS is a specific ProBridge unit for interfacing the DVMRe family of digital video multiplex/recorders and providing local keyboard control via a CBR-KB3 or KTD-405 keypad to a Philips AutoDome. Kalatel Components: (1) CBR-PB2-PHILIPS ProBridge. This product includes: • (1) CBR-PB2-PHILIPS ProBridge unit. • (2) P/N 4310-0034: RJ45 to RJ45 cable. Connects the ProBridge and a CBR-KB3 or KTD-405 to the RS-485 Network. These cables are 6’ in length. �

  • Philips 0150-0241, Philips ProBridge 5 0150-0241B Temperature: Observe the unit’s ambient temperature specifications when choosing a location for the unit. Extremes of heat or cold beyond the specified operating temperature limits may cause the unit to fail. Do not install this unit on top of other hot equipment. Moisture: Do not expose the unit to rain or moisture. Moisture can damage internal components. Do not install this unit near sources of water. RS485 Limitations: Total length of the RS-485 network is limited to 3000’. 1.4

  • Philips 0150-0241, Philips ProBridge 6 0150-0241B 1.5 Installation Steps Summary Carefully and completely read the manuals for each piece of equipment before attempting to install and connect this equipment. Before you start connecting other optional accessory equipment to your system, make sure that all, power, video, VCR, and monitor connections are completed, and everything is working correctly. Wire the telemetry equipment according to that unit’s installation instruction. Use the

  • Philips ProBridge 7 0150-0241B 1.6 Connection Diagrams This drawing depicts one Philips AutoDome connected via an RS485/422 network to a Kalatel DVMReTriplex unit, that provides remote PTZ control over Ethernet via WaveReader software, and a CBR-KB3 or KTD-405 keypad. DVMRe Triplex 4310-0034B Ca

  • Philips ProBridge 8 0150-0241B 2 Cable Specifications ProBridge to Kalatel Unit Cable (RS-485) Part Number : 4310-0034B Communication Type: RS-485 Connector Type: RJ45 ,RJ45 Cable Required: 5 Foot RJ45 to RJ45 Triplex RS485 Cable (Supplied). Connects ProBridge to Triplex and CBR-KB3 or KTD-405 keypa

  • Philips 0150-0241, Philips ProBridge 9 0150-0241B 3 Troubleshooting If you are unable to verify control of the PTZ camera, please do the following: 1. Check that each device is properly powered. 2. Check that all cables and cable connections are correct. 3. Verify that the Dome addresses and Unit ID are correct. 4. If the interface still does not work correctly contact Technical Support.

  • Philips 0150-0241, Philips ProBridge 10 0150-0241B 4 Unit Settings 4.1 Configuring ProBridge Jumpers The unit ships from the factory with the correct settings for most applications and should not require the installer to open the unit and change the jumper settings. However, for trouble shooting purposes we have included the default jumper settings. Opening The ProBridge Place the ProBridge unit face down. Using a small Phillips screwdriver, carefully remove the screws located near each corner o

  • Philips 0150-0241, Philips ProBridge 11 0150-0241B Default Jumper Settings The default jumper settings are listed below: PIN # DEFAULT STATUS JP2 RS485 Position JP3 RS485 Position JP4 RS485 Position JP5 RS232 Position P6 Pin 1 Not Installed P6 Pin 2 Not Installed P6 Pin 3 Installed P6 Pin 4 Not Installed P6 Pin 5 Not Installed P6 Pin 6 Not Installed P6 Pin 7 Not Installed P6 Pin 8 Not Installed P6 Pin 9 Not Installed P6 Pin 10 Not Installed P6 Pin 11 Not Installed P6 Pin 12 Not Installed

  • Philips 0150-0241, Philips ProBridge 12 0150-0241B 5 Specifications Physical Housing Plastic enclosure. Dimensions (W x L x H) 1.5 x 4.4 x 3.3 in. (38 x 112 x 84 mm) Nominal Weight 4.8 oz (136 g) Shipping Weight 1 lb (453 g) packaged, including the external AC power supply and manual. Color Light gray. Environmental Temperature 0 to 40 °C, operating. Relative Humidity 90%, non-condensing. Electrical AC Power External AC power supply included. Voltage Range: 110 to 240 VAC + 10% Current: 200 mA DC Power DC jack, po

  • Philips 0150-0241, Philips ProBridge 13 0150-0241B 6 Appendix 6.1 RS-485 Addressing and Connections The Philips ProBridge (CBR-PB2-PHILIPS) is not an addressable device and requires no user settings. The device simply acts as an interpreter, translating the remote telemetry commands into a format useable by the P/T/Z controller. Each camera input, whether a fixed camera or a Pan/Tilt/Zoom (P/T/Z) unit, is connected to a Kalatel unit input. The Kalatel unit has an RS-485 network address, and so does the P/T/Z camera receiver. This address determines when the telemetry re

  • Philips 0150-0241, Philips ProBridge 14 0150-0241B 6.2 Philip AutoDome Addressing The Philips AutoDome can be addressed from 1 to 9998. The CBR-PB2- PHILIPS ProBridge can control camera addresses from 1 to 9998, however the CBR-KB3 keyboard can control cameras from 1 to 1024. WaveReader software can only control cameras from 1 to 8160. Camera Mapping RS485 Network Address Camera Address AutoDome Address 001 1 - 32 0001 – 0032 002 1 – 32 0033 – 0064 003 1 – 32 0065 – 0096 004

  • Philips ProBridge 15 0150-0241B RS485 Network Address Camera Address AutoDome Address 025 1 – 32 0769 – 0800 026 1 – 32 0801 – 0832 027 1 – 32 0833 – 0864 028 1 – 32 0865 – 0896 029 1 – 32 0897 – 0928 030 1 – 32 0929 – 0960 031 1 – 32 0961 – 0992 032 1 – 32 0993 – 1

  • Philips ProBridge 16 0150-0241B 9 2 5 13 2 9 5 2 1 1 1 7 10 2 6 14 3 0 6 2 2 2 1 8 11 2 7 15 3 1 7 2 3 3 1 9 12 2 8 16 3 2 8 2 4 4 2 0 ALT { } F B C D E AUX 2 AUX 1 AUX 3 AUX 4 # ALT Key Shift Key Aux Keys Preset Key Keyboard Layout 6.4 AUX Operations The remote keyboard has 8 AUX function keys tha

  • Philips 0150-0241, Philips ProBridge 17 0150-0241B Preset Setup for CBR-KB Keyboard To set a new Preset position: 1. Move the camera to the desired position by using the joystick or arrow keys. 2. Press Preset key twice. The LCD will display: “Set Preshot Number?” Select camera key number 1 to 16 (17 to 32 with Shift key turned on) to set the preset number from 1 to 32. 3. Verify by calling up that preset number: Move to another position then press Preset key once. The Keyboard LCD wi

  • Philips 0150-0241, Philips ProBridge 18 0150-0241B 7 Warranty Information 7.1 Factory Service If the unit requires factory service, contact the dealer who supplied the unit to you for the correct procedures on returning the unit to the factory or the nearest factory service center. If the dealer is not available, contact the manufacturer of the unit as detailed below and request a Return Material Authorization number (RMA). The unit’s serial number must be provided before an RMA number can be issued. Units returned to the factory for service must have freight and insurance prepaid, and must show the R

  • Philips 0150-0241, Philips ProBridge 19 0150-0241B Note: Customers requesting an estimate prior to repair will be notified by phone. If they cannot be reached, they will be notified by fax. If we are unable to reach the contact person for repair authorization after one phone attempt and two fax attempts, the equipment will be returned without being repaired. We will hold equipment no longer than two weeks. Advance Replacement Policy When an advance replacement is required, we will send the customer replacement equipment from our stock and receive the returned product in exchange. The received equipment will be evaluated

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Whistler 1710 Owner's manual whistler/1710-K77.pdf 28 Jan 2023 9 0.2 Mb
2 Global American 2807680 Operation & user’s manual global-american/2807680-N75.pdf 26 Feb 2023 56
3 NAD C 427 Owner's manual nad/c-427-EZ3.pdf 16 Feb 2024 12
4 ViewSonic EP4602 Operation & user’s manual viewsonic/ep4602-U9Y.pdf 06 Jul 2022 36 5.36 Mb
5 Byron BY302 Installation and operation instruction byron/by302-567.pdf 18 Mar 2024 2 0.92 Mb
6 Brother DCP-330C Operation & user’s manual brother/dcp-330c-92Y.pdf 17 Oct 2022 113 3.84 Mb

Similar Resources:

  • Albalá Ingenieros

    DEM3000C01

    (30 pages)
    DEM3000C01DUAL AES/EBU AUDIO EMBEDDER IN SD-SDI DIGITAL VIDEOVersion 1.0Albalá Ingenieros, S.A.Medea, 4 - 28037 Madrid - Spain04 January 2018 - © Albalá Ingenieros S.A. - All rights reserved …
  • JVC

    SLL TK-C9300UA

    (2 pages)
    1/3" CCD COLOR VIDEO CAMERATK-C9300UA600 TV LinesTrue Day/Night■ High-Resolution of 600 TV LinesNewly developed 14bit DSP enables industry-leading high quality pictures■ Super LoLuxTMSensitivity 0.05 lx at color mode (50% video level, F1.2, AGC HIGH)0.006 lx at B&W mode (50% video level, F1.2, AGC HIGH)■ Industry-leading S/N Ratio of 52dB■ E …
  • CIT

    Superior VAS-4

    (14 pages)
    VAS-4 VACUUM MONITORING SYSTEM INSTALLATION AND USER’S GUIDE VAS-4 O&M Manual, Revision 0, 01 July 2020 Chemical Injection Technologies, Inc. 835 Edwards Road, Fort Pierce, FL 34982 Tel: 772-461-0666 Fax: 772-460-1847 [email protected] www.chlorinators.com Bulletin 4018Pub. No. 0720-1 Copyright © 2020, Chemical Injection Technologies,Inc. …
  • Sygonix

    1498823

    (84 pages)
    Bedienungsanleitung4-Kanal AHD-Überwachungsset, 4 KamerasBest.-Nr. 1498823 Seite 2 - 21Operating Instructions4-channel AHD surveillance set, 4 camerasItem No. 1498823 Page 22 - 41Notice d’emploiJeu de surveillance AHD 4 canaux, 4 camérasN° de commande 1498823 Page 42 - 61Gebruiksaanwijzing4-kanaals AHD-bewakingsset, 4 camera‘sBestelnr. 1498823 Pag …
  • Pittway

    SYSTEM SENSOR SpectrAlert H12

    (4 pages)
    D900-13-00 1 I56-0982-100RSpectrAlert Horns, Strobes, andHorn/StrobesFor use with the following models:Horns: 12/24 volt: H12/24Strobes: 12 volt: S1215, S12157524 volt: S2415, S2430, S241575, S2475, S24110Combo: 12 volt: P1215, P12157524 volt: P2415, P2430, P241575, P2475, P24110Add suffix “K” for weatherproof horn and horn/strobe, red housing only.Add s …
  • myCam

    VPG-OAP1080KIT

    (57 pages)
    Installation and Operating Instructions Model: VPG-OAP1080KITVersion 2.0 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE.WIRELESSFunk-Kamera-Set …

Comments, Questions and Opinions: