Manualios.com

Philips PSC705 Operation & User’s Manual

Philips PSC705 Manual Online:

4.45, 2280 votes
Philips PSC705 User Manual
Philips PSC705 User Guide
Philips PSC705 Online Manual

Text of Philips PSC705 User Guide:

  • Siren XPress Installation for Windows NT ® (cont) 3. Double Click on Sirensetup.exe 4. Follow the on-screen instructions for installation REAL MODE DOS INSTALLATION (OPTIONAL) This step is only required if you intend to run DOS applications under real DOS mode by restarting your computer in “MS-DOS mode”. This step is not required to run DOS applications in a DOS box (MS-

  • Philips PSC705, Recording Source Configuration.....................................................................................59 Resolving I/O Conflicts..............................................................................................................62 Uninstalling Software Drivers............................................................................................62 Windows ® 95/98/Me Uninstall.............................................................................................62 Windows NT �

  • S/PDIF OUT (NOT FUNCTIONAL IN 5.1 SPEAKER MODE) Disabled In this mode S/PDIF Out is disabled. Select one of the following options to determine what content will be sent to the S/PDIF Out connector. Front Left and Right Channels In this mode the same content being sent to the front Line Out speaker jack in analog format will also be sent to the S/PDIF output in digita

  • Philips PSC705, 2928 17. Product Registration – If you are connected to the internet, you can register your product now by clicking YES in the dialog window shown below. If you prefer to register your product at a later time, go to: www.philipsusa.com/prod_reg_bounce.html and follow the instructions. Installation of Additional Software Packages (such as Siren XPress) Follow these steps to install Siren XPress (or any other included software package). Siren XPress allows you to play and organize music. 1. Insert your installation CD into your CD drive. 2. From the Start Menu select Run and type D:\Applications\Sonic Foundry\Siren\ (D: represents your CD-ROM drive). 3. Double click on Sirensetup.exe 4.

  • Philips PSC705, SOFTWARE END USER LICENSE AGREEMENT PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY.If you (end user,either an entity or an individual) do not agree with these terms and conditions do not install the software.This End User License Agreement is a contract between you and Philips Consumer Electronics B.V, including its suppliers and licensors (“Philips”) for this software program (“Licensed Software”).By installing the Licensed Software or using the Licensed Software you agree to and accept the terms and conditions of this End User License Agreement. YOU AGREE THAT YOUR USE OF THE LICENSED SOFTWARE A

  • Philips PSC705, Line In, Mic In and MIDI/Joystick External analog stereo sources with line level output can be connected to light blue 3.5mm stereo jack at the top of the sound card bracket. A microphone can be connected to the pink 3.5mm mono jack. An analog or digital joystick and/or MIDI devices can be connected to the large connector at the bottom of the bracket. Internal Connections Connectors for three line level analog inputs (Aux In,TAD,Analog CD In) are provid- ed along the top of the sound card as indicate

  • Philips PSC705, SOUND CARD CONFIGURATION (ACTUAL CARD LAYOUT MAY VARY) 13 Line In Mic In Front Out Cen/LFE or S/PDIF Out Game/Midi Port TAD AUX In Analog CD IN CD ANALOG CABLE Rear Out END BRACKET CONFIGURATION Remove the Seismic Edge™ Sound Card from the anti-static bag. Align your sound card with the selected PCI Bus-Slot and firmly push it into the slot. Be sure the sound card is aligned properly and fits snugly into the slot. Use the screw from the slot cover to secure the sound card to the frame of the computer chassis, but do not over-tighten. Securing the card assures proper grounding. 12 Installing Seismic Edge PCI Bus Slot Mounting Screw Sound Card Top & Bottom View PCI Bus Slot Align

  • Philips PSC705, • Open your favorite recording application and start recording. 6160 • Choose "Recording" under “Adjust Volume for”, and check the recording source that you want to display in the Recording Mixer. • Click OK, and the Recording Mixer window will open.Now you can select the recording source you intend to use and adjust the recording volume level. Recording Source Configuration 602500_705_Seismic Manual.qxd 3/12/01 10:47 AM Page 60

  • Philips PSC705, • Use the Field Chooser window to view your collection the way you want to see it. SIREN XPress brings powerful functionality to your desktop: • Use Search for Music to find music on a network or removable drive. • Export custom playlists to your Rio or Nomad II portable MP3 device. • Use your Microsoft Internet Keyboard hotkeys to control SIREN XPress’s functions. Siren™ XPress Quick Start Welcome to Sonic Foundry’s SIREN XPress! This guide is designed to provide you with information that will allow you to immediately begin taking advantage of the powerful features of SIREN™ XPress. SIREN XPress allows you to operate in Philips compact mode or normal mode

  • Philips PSC705, HELP BUTTON Click the blue “Help” button on any tab and you will have access to comprehensive hyper linked help file describing the control panel. Within the help file you can navigate by simply clicking on parts of the image of the control panel, searching or by using contents or index lists. U TILITIES TAB Windows® Audio Applications Volume Control: Windows ® audio mixer for adjusting volume of various sound sources. Multimedia Properties: Windows ® utility for selecting multimedia devices. Use it to switch between the Seismic

  • Philips PSC705, Philips Seismic Edge™ 5.1-Channel PCI Sound Card PSC705 ____________________________ Philips Consumer Electronics Company One Philips Drive Knoxville,TN 37914 Revised 3/9/01 602500_705_Seismic Manual.qxd 3/12/01 10:46 AM Page 1

  • Philips PSC705, 51 50 Select the Output Mode you wish to test. There are two modes to test your speaker settings: Manual and Auto Manual Mode: Once you have selected the appropriate Output Mode, click on any of the desired speakers to verify proper connection. You can check the Loop Sounds box that will result in continuous sound in that speaker. Click the Stop button to stop the test. Auto Mode: Click on Auto Mode. Sounds will emanate in sequence starting with LF and cycle through each speaker in the Output Mode you selected. Use the Master Volume

  • 1918 4 Select NEXT to install the drivers.3. If you are installing from the install CD or if you have copied the install to any other location, select SPECIFY A LOCATION and browse to your directory where the setup files are located. For Windows ® 95/98/Me, select Win9x directory then choose english. For Windows ® 2000, select WDM directory. Click NEXT. Installing Seismic Edge

  • Philips PSC705, 12. Enter the serial number located on the Yamaha Corporation Certificate of Authenticity included with your documentation. This serial number is case sensitive! Click NEXT. 25 YAMAHA SOFTSYNTHESIZER INSTALLATION 10. After Seismic Edge™ driver installation, the software launcher will prompt you to install the Yamaha SoftSynthesizer. Click YES. 11. The Yamaha SoftSynthesizer Welcome page appears. Click NEXT. 24 Installing Seismic Edge 602500_705_Seismic Manual.qxd 3/12/01 10:47 AM Page 24

  • Philips PSC705, Seismic Edge truly revolutionizes PC sound. Install your sound card as directed, connect a 5.1 speaker system (left & right front, left & right rear, center, and subwoofer) and try these: • Play the latest Hollywood DVD hit and be prepared for goosebumps as sound effects sweep you away. • Rediscover your favorite music in a whole new dimension – even those golden oldies.You’ve never heard them like this before! • Play a 3D audio-enabled game and experience what "virtual reality" can mean. • Elevate your classic 2D games to a whole new level of audio realism. • Compare enhanced QMSS to ordinary Do

  • Philips PSC705, TO INSTALL THE SOUND CARD: Turn off your computer, and disconnect the power cable. Disconnect all devices that are connected to the computer. Remove the computer cover. Select an available PCI slot and, if necessary, remove its cover plate. Keep the mounting screw to secure your sound card later. Save the mounting plate for possible use later. INSTALLING THE SOUND CARD Uninstall the drivers for any previously installed sound cards. Consult your previous sound card documentation for details. Turn off computer and remove existing sound card. If your computer has on-board sound,consult your PC documen

  • Philips PSC705, 2726 14. Select A Program Folder dialog box appears. Click NEXT 13. The Choose Destination Location dialog box appears. Follow the instructions in this box . Click NEXT Installing Seismic Edge 602500_705_Seismic Manual.qxd 3/12/01 10:47 AM Page 26

  • Philips PSC705, 3332 2. Select the GENERAL tab and click the Add button. You may select any one of the GAME CONTROLLERS listed, then click OK. JOYSTICK CONFIGURATION FOR WINDOWS® 95/98/Me/2000: 1. Open the Control Panel and double-click on the GAME CONTROLLERS icon. Select the ADVANCED tab and under PORT DRIVER ASSIGNMENT and select Philips Seismic Edge GamePort. Installing Seismic Edge 602500_705_Seismic Manual.qxd 3/12/01 10:47 AM Page 32

  • Philips PSC705, Note: Any time you say No to a Applications Launcher dialog box like the one shown above, a second box will appear asking if you want to launch the next time Windows is started. Answer Yes or No as desired. 9. Next, the DirectX ® Setup dialog box will appear. Click OK. 23 7. After clicking “Finish” the Philips Seismic Edge™ GamePort will be installed. It is possible during gameport installation,Windows ® will detect newer versions of msanalog.vxd, vjoyd.vxd and msjstick.drv. It is recommended that you keep your existing files. ClickYES on all 3 screens that appear. 8. Next, the software launcher will allow you to open the Seismic Edge control panel and confi

  • Philips PSC705, In 2 speaker or earphone mode you will see two dots and in 4 speaker modes you will see four dots. You can also select other effects patterns by right-clicking on the visual display and choosing from the list of available graphic effects.” RIPPING (RECORDING) FROM A CD 1. Place an audio CD in your computer’s CD-ROM drive. 2. In normal mode, select the Play/Rip CD tab (from the Media Manager panel).Your computer’s CD drives are displayed on the Play/Rip CD page. 3. Specify the CD drive containing the audio CD (from the drop-down list located above the track list).The CD’s tracks are displayed, and SIREN attempts

  • Philips PSC705, Before calling the technical support number please make sure you have the following information available: • Model number and date of purchase. • Computer type, processor speed, and memory available. • Computer Operating System (IE:Windows ® 95,Windows ® 98, etc.) • On-screen error information. • Other hardware connected to your sound card. Technical Support Information: • Toll-Free Telephone Number: 1-800-835-3506 Operating Hours (US Central Time): • Monday through Friday 7:00am – 11:00pm • Saturday & Sunday 8:00am – 10:00pm Internet Address: www.pcsound.philips.com Product Return Before returning the Philip

  • 59 UPGRADING TO SIREN JUKEBOX If you like SIREN XPress but want more powerful options, upgrade to Sonic Foundry’s SIREN Jukebox: • CD burning • Unlimited MP3 ripping • Advanced audio effects • Perfect Clarity Audio encoding • Higher bitrate WMA encoding To upgrade, choose Instant Upgrade from the Help menu. A BOUT AUDIOPIX™ AudioPix™ makes it ea

  • Philips PSC705, OUTPUT CONTROL Balance Slider Use this slider to adjust the relative volume of the right vs. left speaker. The overall volume will not be affected.To center the balance slider automatically, right click on the balance slider, and choose “Center”. Fade Slider Use the slider to adjust the relative volume of the front vs.rear speaker. To center the fade slider automatically, right click on the fade slider, and choose “Center”. Volume Sliders Center: To adjust the volume output for the center channel in 5.1-Speaker mode. Master: To adjust the volume output for the master volume (all speakers affected). LFE: To adjust the vo

More Instructions:

DOWNLOAD

Related Products and Documents (Sound Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kenmore 11063042101 Features & benefits kenmore/11063042101-LJY.pdf 12 Mar 2024 1
2 TomTom Runner & Multi-Sport Reference manual tomtom/runner-multi-sport-C9V.pdf 25 Sep 2022 40 1.15 Mb
3 Panasonic WV-SW314 Specification panasonic/wv-sw314-MFN.pdf 21 Sep 2023 2 0.68 Mb
4 Kuppersbusch EKE 807.2 Instructions for use and installation instructions kuppersbusch/eke-807-2-93A.pdf 18 Jul 2023 12
5 Sony DVP-NC600 (DVP-NC600 CD/DVD Player) Operating instructions manual sony/dvp-nc600-dvp-nc600-cd-dvd-player-K87.pdf 16 Dec 2023 84 1.19 Mb
6 Goodman ASX Service instructions manual goodman-mfg/asx-5EK.pdf 11 Aug 2022 80 1.3 Mb

Similar Resources:

  • Asus

    XONAR PHOEBUS

    (122 pages)
    U7062 First Edition V1 Jan. 2012Xonar Phoebus PCI Express 7.1-Channel Gaming SoundcardQuick Start GuideU7062_Xonar-Phoebus_QSG.indb 1 18.01.2012 16:12:15 Uhr …
  • IQaudIO

    PI-DAC+

    (39 pages)
    IQaudIO User Guide v20 This document covers the installation, software configuration and usage of IQaudIO audio cards for the Raspberry Pi A+, B+, RPi2, Pi-Zero and Raspberry Pi 3. If you would like to see additional information within this document please email us at [email protected] IQaudIO'Limited,'Company'No:'09461908'For those …
  • Omnia

    Stereo Audio Processor

    (124 pages)
    Omnia ONE Stereo Audio Processor Installation and Operation Manual Revised: August 2010 Applicable to All Software Styles Software Version 2.2 or higher Omn ia ● 1241 Superior Avenue East, Cleveland, Ohio 44114 USA TEL: +1 216.241.7225 ● FAX: +1 216.241.4103 ● www.omniaaudio.com …
  • AOpen

    AW-850

    (8 pages)
    AOPEN AW-850 PCI Sound Card User Manual TABLE OF CONTENTS Overview Installing the sound card Appendix A. Hardware Information FCC and CE Radiation Norm FCC This equipment has been tested and found to comply with limits for a Class B digital device pursuant to Part 15 of Federal Communication Commission (FCC) rules. CE This equipment has been tested and f …
  • ALLEN & HEATH

    SQ MADI Option Card

    (2 pages)
    M-SQ-MADI-A Fitting Note AP12392 Issue 1 SQ MADI Option Card M-SQ-MADI-A is one of several audio networking options that can be fitted to an Allen & Heath SQ mixer. It provides 64x64ch of 48/96kHz AES MADI (AES10) over coaxial BNC.  SQ MADI requires SQ Firmware V1.5.2 or later.  To avoid damage to the BNC sockets, plug and unplug any cable with c …
  • Roland

    V-Card VC-1

    (156 pages)
    InformationWhen you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.As of April 1, 2004 (Roland)ARGENTINAInstrumentos Musicales S.A.Av.Santa Fe 2055 (1123) Buenos AiresARGENTINATEL: (011) 4508-2700 BRAZILRoland Brasil LtdaRua San Jose, 780 Sala BParque Industrial San JoseCotia - …

Comments, Questions and Opinions: