HP Jetdirect 4200 Manual 

Text of HP Jetdirect 4200 User Guide:

• HP Jetdirect 4200, PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUD

• HP Jetdirect 4200, Status Status of the print job: Printing: currently printing on the printer ● Paused: user paused the print job● Spooling: job is being spooled to the appliance by a client● Queued: job is queued and is waiting to be printed● Unknown: error occurred; unknown status (the user should delete the print job with this status) ● Under Print Services on the menu, select Printers.1. Find the appropriate printer and click "View Jobs" for that same line. The Print Jobs page is displayed.2. To delete a print job, click on the line for the print job.3. Click refresh

• HP Jetdirect 4200, Backing Up, Restoring, Resetting, Rebooting, and Upgrading the Appliance Backing Up Network Settings and Printer Information Restoring Network Settings and Printer Information (Using the Web Interface) Resetting the Appliance to Factory Defaults (Using the Front Panel) Rebooting (or Restarting) the Appliance Upgrading the Firmware on the Appliance Troubleshooting the Appliance Backing Up Network Settings and Printer Information Saving the configuration parameters makes it easy to restore those parameters if the appliance must be replaced or if its configuration values are accidentally changed or lost. Use the Backup Settings page to save the following

• 1 I can't locate the printer from the client. The client is on a different subnet than the appliance. Verify that WINS is configured correctly in "Network Settings". The Network Neighborhood browser has not yet updated. Try accessing the appliance by selecting Start from the task bar, and select Find and Computer. 2 How do I know the printer dri

• HP Jetdirect 4200, Menu The menu is always displayed on the left side of the any displayed page in the web interface. Click on any of the following topics listed on the menu for more information: General Overview Date/Time Administrator Account Install Upgrade Restart Appliance Network Settings TCP/IP Microsoft Networking LPD Settings Print Services Printers Driver Management Backup/Restore Backup Settings Restore Settings Overview Page The following information is displayed on the Overview page: Print Server Appliance Name Name as entered

• HP Jetdirect 4200, 5 The appliance is set up to use DHCP. When I powered it off and then powered it back up again, DHCP reassigned it to a different IP address than it had previously. Now the clients can no longer print. How can I avoid this? Use a WINS server along with DHCP, so that when the appliance powers up it will always be reassigned the same IP address. If you are not using WINS, you may alternatively set the appliance IP address manually and have the DHCP administrator select an IP Address Pool range which excludes the appliance address. Or, have the DHCP ad

• HP Jetdirect 4200, Summary of Javascript functions on this page user forums search contact hp hp customer care home hp user support forum guide The hp user support forum is a place where you can post and receive helpful support and tips for your HP product. Please feel free to browse or post a question to the forums. All answers are provided by HP product experts and other users. Please choose a forum from the list below to browse or participate in the forum: hp pavilion user support forums hp pavilion 3000 series forum hp pavilion 4400 series forum hp pavilion 4500 series forum hp pavilion 5000 series f

• HP Jetdirect 4200, Invalid Domain Name The DNS Domain Name must be alphanumeric with no spaces. Dashes (-) and periods (.) are acceptable. Retype the DNS Domain Name. Use only alphanumeric characters with no spaces. Dashes ( - ) and periods ( . ) are acceptable. Restarting network, please wait You network settings have been updated Confirmation message. Microsoft Networking Settings Message Explanation / Remedy Invalid Appliance Name The appliance name must be alphanumeric. Dashes (-) are acceptable. It can be up to 12 characters long. Retype the appl

• HP Jetdirect 4200, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable

• 2 I have not been able to print from any client to the intended printer. The IP address or printer name may not be correctly configured for the desired printer. Verify that the appliance can print to the printer by using the "print test page" functionality of the printer property page in the web interface of the appliance. If the test page does not print, there is a problem in

• HP Jetdirect 4200, Contact HP General Information (The central location on HP's web site for the HP Print Server Appliances and similar products) Online Customer Forum (Where customers can discuss ideas and suggestions for using using the HP Print Server Appliances) Customer Support (Lists all of the support options offered by HP and contact information such as phone numbers and e-mail addresses) Warranty and Regulatory Information (Includes the product, regulatory information, and GNU public licenses) Trademarks and Copyrights (Includes all trademarks and copyrights for the HP Print Server Appliances)

• Bad Packets Received Total number of improperly formatted network packets received since the last reboot. A large number of bad packets may indicate network problems. Received Packets Dropped Number of packets dropped since the last reboot because the receive buffer is full. Framing Errors Received Number of improperly formatted frames received since the last reboot. Transmit Packet

• HP Jetdirect 4200, Adding a Printer to the Appliance There is no limit to the number of printers that can be added to the appliance. However, printing performance may degrade if there are many heavy-use printers on the appliance. Both UNIX and Windows clients can simultaneously print to the same printer. UNIX clients ignore any Windows driver selections. The following printer drivers are factory-installed. These drivers, and any others that have been added to the appliance, can be associated with a printer on the appliance. HP LaserJet 4 series prin

• HP Jetdirect 4200, No Access● Physical Specifications Attribute Specification Dimensions 441 millimeters (mm) (17.4 inches) W x 323 mm (12.7 inches) D x 63 mm (2.5 inches) H Weight 4.6 kilograms (10.1 pounds) Temperature Operating: +5 degrees Celsius (C) to +40 degrees C (41 degrees Fahrenheit (F) to 104 degrees F) Non-operating: -40 degrees C to +70 degrees C (-40 degrees F to 158 degrees F) Network connection RJ-45 Serial port DB-9 (supports all APC uninterruptible power supplies with a Simple Signaling cable (APC part # 940-0020B)) Acoustic noise 52 dB

• HP Jetdirect 4200, To access the Administrator Accounts page, follow these steps: CAUTION: If all administrator passwords are forgotten, the only way to gain access to the appliance is to reset the appliance to factory defaults (using the front panel). After the appliance is reset to factory defaults, all configuration information will be lost including network settings, printers, and possibly revert to a previous version of the firmware. Log on to the web interface. (The default is "admin" for the username and "admin" for the password.) 1. On

• HP Jetdirect 4200, Use the number buttons on the front panel of the appliance to enter the IP address. Press . Use the number buttons on the front panel of the appliance to enter the subnet mask. Press . Use the numbers on the front panel of the appliance to enter the default gateway. Press . Press . Press . After a moment, the appliance will resume displaying normal operating messages if the IP address entered is valid. Configuring the IP Address Using DHCP In DHCP mode, the following is displayed: Display Action The "=" will appear in the disp

• HP Jetdirect 4200, Invalid Time/Date The date and/or time fields contain non-numeric character(s). The date and/or time fields may only contain numbers and the specified separator characters. Re-enter the date and/or time using the correct format and characters. Your date and time settings have been applied Confirmation message. Administrator Account Message Explanation / Remedy Invalid Administrator Name The Administrator Name must be alphanumeric and can contain the following special characters: ~ ` ! @ $ % ^ ( ) - + { } ' . Retype the admin

• HP Jetdirect 4200, Jobs Pending Number of print jobs waiting to be printed for all of the printers managed by the appliance. Changing the Date and Time Use the Date and Time Configuration page to set the date and time of the appliance. Field Name Description Date Enter the date in the format: mm/dd/yyyy. The complete year must be specified. Leading zeroes may be omitted. (For example: "1/1/1999" and "12/25/2001".) Time Enter the time in the format: hh:mm:ss. The seconds and leading zeroes may be omitted. (For example: "5:35" and

• HP Jetdirect 4200, Safety Certifications Products comply with: IEC 950: (1991)+A1,A2,A3,A4/EN60950 (1992)+A1,A2,A3,A4 ● UL 1950● CSA 950● Product Specifications http://albatross.rose.hp.com/~lindsay/pdfs/english/prodspec.htm (5 of 5) [6/22/2001 11:25:47 AM]

• Product Specifications Model Number System Requirements Language Options Recommended Cables Supported Clients Supported Printers Supported Web Browsers What Ships in the Box Security Features Physical Specifications Electrical Specifications Environmental Specifications Safety Certifications Figure 1: The HP Print Server Appliance 4200 Model Number Product Model number

More Instructions:

	HP Jetdirect 4200 Service 18-05-2023 16	DOWNLOAD
	HP Jetdirect 4200 Service manual 07-03-2024 540	DOWNLOAD
	HP Jetdirect 4200 Install manual 05-06-2023 52	DOWNLOAD
	HP Jetdirect 4200 Start 01-12-2023 20	DOWNLOAD

Related Products and Documents (Print Server):

Comparable Devices:

Similar Resources:

• Oki 5150 (2 pages) Warning!If the printer has recently been powered on, some fuser components will be very hot. Handle the fuser with extreme care, holding it only by its handle, which will only be mildly warm to the touch.A warning label clearly indicates the area. If in doubt, switch the printer off and wait at least 10 minutes for the fuser to cool before opening the printe …

• ConnectGear PAN1000W (76 pages) 1 TABLE OF CONTENTS COPYRIGHT .........................................................................................................................3 1.INTRODUCTION ...............................................................................................................4 PRODUCT OVERVIEW .............................................................. …

• X-media XM-PS110P (10 pages) Quick Installation Guide 1-Port Wired Print Server Model No.: XM-PS110P XM-PS110U For the most up-to-date information, please visit www.x-mediausa.com Version 1.1 …

• SEH PS107 (32 pages) Quick Installation Guide 1Monday - ThursdayFriday8:00 a.m. to 4:45 p.m. and8:00 a.m. to 3:15 p.m. (CET)+49 (0)521 94226-44@[email protected] ServerPS107Quick Installation GuideOverview [en] This Quick Installation Guide providesa description of the installation of thePS107. It contains the followinginformation: Safety Regulations General Inform …

• NETGEAR PS121v2 - USB Mini Print Server (2 pages) PS121USB 2.0 Mini Print ServerFlexible Time Saving Easy to Use Cost Effective • Help is there when you need it! NETGEAR provides 24x7 technical support* in English, with selected local language support during office hours.Share a Home or Office Printer Without Sharing Your PCMulti-user access to your printer is now simpler than ever. NETGEAR’s USB Mini …

• Zebra ZebraNet PS4000 (4 pages) IntroductionThe ZebraNet PS4000 Print Server acts as a means to connect up to four (4) print-ers to a Wireless Local Area Network (WLAN) using only one wireless connection. The ZebraNet PS4000 communicates to the network by means of an 802.11g radio link and will apppear to the network as a single printer. It will then pass properly addressed print-er comm …

Comments, Questions and Opinions: