Manualios.com

HP Compaq dc7100 SFF Hardware Reference Manual

HP Compaq dc7100 SFF Manual Online:

3.45, 2009 votes
HP Compaq dc7100 SFF User Manual
HP Compaq dc7100 SFF User Guide
HP Compaq dc7100 SFF Online Manual

Text of HP Compaq dc7100 SFF User Guide:

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com A-1 A Specifications Ensure at least 4 inches (10.2 cm) of space on all sides remains clear and free of obstructions. HP Compaq Small Form Factor Desktop Dimensions Height 3.95 inches 10.3 cm Width 13.3 inches 33.78 cm Depth (depth will increase if the computer is equipped with a port security bracket) 14.9 inches 37.85 cm Approximate Weight 21 lb 9.53 kg Temperature Range Operating 50° to 95° F 10° to 35° C Nonoperating -22° to 140° F -30° to 60° C Relative Humidity (noncondensing) Operating 10–90% 10–90% Nonoperating (38.7°

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-37 Hardware Upgrades “Hot-Plugging” or “Hot-Swapping” MultiBay Drives Ä CAUTION: To prevent damage to the computer, the drive, and any data stored on the drive: Before inserting or removing a hard drive, shut down the computer. Never remove a hard drive while the computer is on or on standby. To ensure that the computer is not on standby, turn the computer on, then shut it down. If the computer is running a preinstalled operating system supplied by HP, you can insert or remove a CD-ROM drive while the computer is on, off, or on standby. Ä CAUTION: After inserting an o

  • HP Compaq dc7100 SFF, C-4 www.hp.com Hardware Reference Guide Security Lock Provisions 2. Screw the lock to the chassis using the screw provided. 3. Insert the plug into the lock 1 and push the button in 2 to engage the lock. Use the key provided to disengage the lock.

  • Hardware Reference Guide www.hp.com E-1 E Routine Computer Care and Shipping Preparation Routine Computer Care Follow these suggestions to take care of the computer and monitor: ■ Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance at the back of the system unit and above the monitor to permit the required airflow. ■ Nev

  • HP Compaq dc7100 SFF, B-2 www.hp.com Hardware Reference Guide Battery Replacement Ä CAUTION: Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the

  • HP Compaq dc7100 SFF, B-4 www.hp.com Hardware Reference Guide Battery Replacement Type 3 a. Pull back on the clip 1 that is holding the battery in place, and remove the battery 2. b. Insert the new battery and position the clip back into place. Removing a Coin Cell Battery (Type 3) ✎ After the battery has been replaced, use the following steps to complete this procedure. 5. Replace the computer cover. 6. Plug in the computer and turn on power to the computer. 7. Reset the date and time, your passwords, and any specia

  • HP Compaq dc7100 SFF, 2-38 www.hp.com Hardware Reference Guide Hardware Upgrades Uninstalling the MultiBay Security Screw When installed, the MultiBay security screw disables the MultiBay eject lever, so that a drive installed in the MultiBay cannot be removed. To remove a drive installed in the MultiBay, you must first remove the security screw, if installed, using the FailSafe Key. ✎ If a FailSafe Key was not provided with the computer, contact an authorized HP reseller or service provider. Order PN 166527-001 for the wrench-style key or PN 166527-002 for the screwdriver bit key. Uninstalling the MultiBay Security Screw (Wrench-Style Key shown)

  • HP Compaq dc7100 SFF, 2-26 www.hp.com Hardware Reference Guide Hardware Upgrades 8. Position the guide screws on the drive into the J-slots in the drive bay 1. Then, slide the drive toward the rear of the computer 2 to secure the drive in the J slots. Installing the Optical Drive

  • HP Compaq dc7100 SFF, 2-6 www.hp.com Hardware Reference Guide Hardware Upgrades Replacing the Computer Cover To replace the computer cover, align the tabs on the panel with the slots on the chassis, then slide the cover all the way onto the chassis until it locks into place. Replacing the Computer Cover

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-41 Hardware Upgrades Partitioning and Formatting a MultiBay Hard Drive ✎ You must be logged on as an Administrator or a member of the Administrators group in order to complete this procedure. 1. Exit all software applications, shut down the operating system software, and turn off the computer. 2. Insert the MultiBay hard drive into the MultiBay. Refer to “Inserting a Drive into the MultiBay” for more information. 3. Turn on the computer. 4. Click Start. 5. Right-click My Computer, then click Manage. 6. Click Storage, then double-click Disk Management. 7. Right-click the MultiBay hard drive, then cli

  • 1-4 www.hp.com Hardware Reference Guide Product Features Keyboard Keyboard Components 1 Function Keys Perform special functions depending on the software application being used. 2 Editing Keys Includes the following: Insert, Home, Page Up, Delete, End, and Page Down. 3 Status Lights Indicate the status of the computer and keyboard settings (Num Lock, Caps Lock, and

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-3 Hardware Upgrades Unlocking the Smart Cover Lock ✎ The Smart Cover Lock is an optional feature and is available on select models only. The Smart Cover Lock is a software-controllable cover lock, controlled by the setup password. This lock prevents unauthorized access to the internal components. The computer ships with the Smart Cover Lock in the unlocked position. For more information about locking the Smart Cover Lock, refer to the Desktop Management Guide on the Documentation CD. Using the Smart Cover

  • HP Compaq dc7100 SFF, 2-12 www.hp.com Hardware Reference Guide Hardware Upgrades 8. Repeat steps 6 and 7 for any additional modules that you want to install. 9. Replace the computer cover. 10. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. The computer automatically recognizes the additional memory the next time you power on the computer.

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-5 Hardware Upgrades Removing the Computer Cover To remove the computer cover: 1. If you have locked the Smart Cover Lock, restart the computer and enter Computer Setup to unlock the lock. 2. Turn off the computer properly through the operating system, then turn off any external devices. 3. Disconnect the power cord from the power outlet and the computer, and disconnect any external devices. Ä CAUTION: Before removing the computer cover, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 4. Press the buttons on the left and right sides of the computer

  • Hardware Reference Guide www.hp.com 2-15 Hardware Upgrades 8. Install the expansion card by sliding the card under the slot cover retention latch then pressing the card down into the slot on the system board. ✎ Be sure not to scrape other components in the chassis when installing an expansion card. Installing an Expansion Card 9. Rotate the slot cover retention

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com B-3 Battery Replacement Type 2 a. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out 1. b. To insert the new battery, slide one edge of the replacement battery under the holder’s lip with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery 2. Removing and Replacing a Coin Cell Battery (Type 2)

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 1-5 Product Features Windows Logo Key Use the Windows Logo key in combination with other keys to perform certain functions available in the Windows operating system. Refer to the “Keyboard” section to identify the Windows Logo key. Special Mouse Functions Most software applications support the use of a mouse. The functions assigned to each mouse button depend on the software applications you are using. Windows Logo Key Functions Windows Logo Key Displays or hides the Start menu. Windows Logo Key + d Displays the Desktop. Windows Log

  • Hardware Reference Guide www.hp.com C-5 Security Lock Provisions With Security Cable 1. Fasten the security cable by looping it around a stationary object. 2. Thread the keyboard and mouse cables through the lock.

  • HP Compaq dc7100 SFF, Index-2 www.hp.com Hardware Reference Guide Index H hard drive activity light 1–2 installing in 3.5-inch bay 2–32 MultiBay 2–41 removing 2–31 replacing 2–28 restoring 2–32 SATA connectors 2–18 headphone jack 1–2 headphone line-out connector 1–3 hot-plugging or hot-swapping MultiBay drives 2–37 I installation guidelines 2–18 installing battery B–1 cable lock C–1 chassis clamp lock C–3 expansion card 2–13 guide screws 2–24 hard drive 2–33 hard drive in 3.5-inch bay 2–32 memory 2–7 MultiBay drive 2�

  • HP Compaq dc7100 SFF, 2-2 www.hp.com Hardware Reference Guide Hardware Upgrades Using the Small Form Factor Computer in a Minitower Configuration The Small Form Factor computer can be used in either a minitower or desktop configuration. To use it in the minitower configuration, stand the computer up on its right side as shown in the illustration below. ✎ Ensure at least 4 inches (10.2 cm) of space on all sides of the computer remains clear and free of obstructions. Changing from Desktop to Minitower Configuration ✎ To further

  • 2-22 www.hp.com Hardware Reference Guide Hardware Upgrades 7. Disconnect the power and data cables from the rear of the optical drive. Disconnecting the Power and Data Cables 8. Slide the optical drive forward and lift it up and out of the drive cage. Removing the Optical Drive

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com Index-3 Index installing 2–24 location 1–2 precautions E–2 removing 2–20 P padlock, installing C–2 Parallel ATA devices 2–18 parallel connector 1–3 partitioning hard drive, MultiBay 2–41 PCI card See expansion card power button 1–2 cord connector 1–3 indicator light 1–2 power supply 2–30, A–2 R rear panel components 1–3 removing bezel 2–34 computer cover 2–5 diskette drive 2–20 expansion slot cover 2–14 hard drive 2–31 MultiBay drive 2–40 optical drive 2–20 PCI Express expansion card 2–16 Smart Cover Lock 2–4 RJ-45 connector 1–3 rout

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-1 2 Hardware Upgrades Serviceability Features This computer includes features that make it easy to upgrade and service. No tools are needed for most of the installation procedures described in this chapter. Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and warnings in this guide. Å WARNING: To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching. Å WARNING: To reduce the risk of electrical

  • HP Compaq dc7100 SFF, E-2 www.hp.com Hardware Reference Guide Routine Computer Care and Shipping Preparation Optical Drive Precautions Be sure to observe the following guidelines while operating or cleaning the optical drive. Operation ■ Do not move the drive during operation. This may cause it to malfunction during reading. ■ Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading. ■ Avoid placing the drive in a locati

  • HP Compaq dc7100 SFF, 2-16 www.hp.com Hardware Reference Guide Hardware Upgrades Removing a PCI Express Expansion Card To remove a PCI Express expansion card: 1. If you have locked the Smart Cover Lock, restart the computer and enter Computer Setup to unlock the lock. 2. Turn off the computer properly through the operating system, then turn off any external devices. 3. Disconnect the power cord from the power outlet and disconnect any external devices. 4. Remove the computer cover. Refer to “Removing the Computer Cover.” 5. Release the slot cover retention latch on the back of the computer that secures the PC

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-31 Hardware Upgrades 8. Pull the tab that locks the drive in place away from the drive 1, slide the hard drive toward the front of the computer, then lift the drive up and out of the bay 2. Removing the Hard Drive 9. To install a hard drive, reverse the above procedure. ✎ The replacement hard drive kit includes several data cables. Make sure to use the cable that is exactly the same as the factory-installed cable. ✎ If the system has only one SATA hard drive, the data cable must be connected to the c

  • HP Compaq dc7100 SFF, Hardware Reference Guide www.hp.com 2-17 Hardware Upgrades 7. Store the card in anti-static packaging. 8. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. 9. Rotate the slot cover retention latch back in place to secure the expansion cards and expansion slot covers. Ä CAUTION: All expansion card slots on the rear of the computer must contain either an expansion card or slot cover for proper cooling of internal components during operation.

Related Products and Documents (Desktop):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ELICA EPR628SS Installation instruction manual elica/epr628ss-827.pdf 20 Jun 2023 13
2 Yamaha PSR-32 Owner's manual yamaha/psr-32-628.pdf 30 Aug 2023 20 2.48 Mb
3 Roadstar HIF-5811MPT Service manual roadstar/hif-5811mpt-LZ6.pdf 01 Nov 2023 56
4 Gardena 2691 Assembly instructions gardena/2691-FJL.pdf 12 Jul 2023 4
5 Jamara Edge 540T Instruction manual jamara/edge-540t-PQ9.pdf 24 Jun 2022 16
6 Cocos-Promotions SIMPLE BLUE MP3-Player Operation & user’s manual cocos-promotions/simple-blue-mp3-player-R46.pdf 24 Oct 2023 3

Similar Resources:

  • Avid Technology

    HP Z8G4

    (14 pages)
    Page 1 of 14 Dave Pimm – Avid Technology – Dec 22, 2017 Rev A Avid Configuration Guidelines HP Z8 G4 workstation Dual 8 to 28 Core CPU System …
  • Wincor Nixdorf

    P4-EPC/B-E2

    (32 pages)
    P4-EPC / B-E1, B-E2 With Socket-Based Intel Celeron, Intel Pentium IV, Mobile Intel Pentium IV Processor - M Operating Manual …
  • Raymarine

    SeaTalk Joystick

    (20 pages)
    1Document Number 81227-2June 2005Raymarine SeaTalk Joystick IntroductionThank you for choosing Raymarine.This booklet contains installation, calibration and operation instructions for your Joystick. To get the best from your product, please take time to read these before use.Autopilot CompatibilityThe SeaTalk Joystick is compatible with Raymarine …
  • Sony

    VGC-JS160J

    (2 pages)
    VGC-JS160J/SVAIO® JS Series All-in-One Easy to setup. Easy to use. Easy to love.POWERFUL PC PERFORMANCEIntel® Pentium® Dual-Core E5200 processor (2.5GHz ) with 4GB of pre-installed system memory.The VAIO® JS All-in-One Desktop comes pre-installed with Genuine Microsoft® Windows Vista® Home Premium 64-bit .Store your digital photos, videos and impo …
  • Havis-Shields

    2002-2008 Ford Explorer C-TCB-26

    (2 pages)
    C-TCB-26_INST_9-07 INSTALL INSTRUCTIONS C-TCB-26 2002-2008 FORD EXPLORER TOOLS REQUIRED: Torx Bit Set (T-55) 3/16” Allen wrench 3/8” Standard Socket Set 3/8” Metric Socket Set 3/8” Ratcheting Wrench Powered drill 3/16” & 5/16” Drill bits Open-end wrench set HARDWARE: QTY DESCRIPTION PART # 1 Pole support assembly CM93071-26W 1 Tel …
  • HP

    LaserJet 1000 series

    (34 pages)
    HPE StoreEasy 1000 StorageGetting Started GuideAbstractThis document contains setup, installation, and configuration information for the HPE StoreEasy 1000 Storage systems.Part Number: B7D88-96486Published: October 2016Edition: 2 …

Desktop Instructions:

Comments, Questions and Opinions: