HP MR4000N Operation & User’s Manual
|
HP MR4000N, The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO ANY MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODU
HP MR4000N, Important Safeguards WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE SUFFICIENT REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPO
HP MR4000N, Safety 1 Safety First: • Read all instructions before installing and operating the product. • Keep this User’s Guide in a safe place for future reference. • Observe all warnings in this User’s Guide. • Follow all instructions in this User’s Guide. • Do not use attachments that are not recommended by HP with this product. Use of inadequate attachments may result in damage to the product or personal injury. Installing the HP HDTV Tuner: WARNING: To reduce the risk of fire or electrical shock, do not expo
HP MR4000N, Specifications 23 Specifications General Specifications Broadcasting Standard Digital TV (ATSC), analog TV (NTSC) Power Requirement 120V, 60 Hz Power Consumption 20W (standby 1.5W) Dimensions (W x D x H) 35.8 × 30 × 6.9 cm (14.1 × 11.8 × 2.7 in.) Weight 2.4 kg (5.3 lb.) RF Specifications Tuning System Type F/S Band Coverage Air (VHF: 2–13, UHF: 14–69) Cable (VHF: 1–64, UHF: 65–125 Antenna 75 ohm external antenna terminal for VHF/UHF Number of Inputs/outputs 75 ohm air/cable (VHF/UHF) Monitor output DTV output (YPbPr/DVI (RGB), Lt, Rt) Dolby d
Table of Contents vii Table of Contents Safety ..................................................................................................................... 1 Introduction ............................................................................................................ 3 What’s in the Box .........................................................................
HP MR4000N, Using the HP HDTV Tuner 9 Using the Remote Control Identifying the remote control buttons Button Description Power Press Power once to turn the HDTV Tuner on or off. Number keys Use the keypad numbers (0–9) to directly select channels. Help Press when inside the On-Screen Menu. Displays a help window describing the current feature. Pre-CH Press Pre-CH (previous channel) once to recall the last channel. Fav-CH Press Fav-CH (favorite channel) once to view the next channel assigned as a favorite channel. MTS Press MTS to select stereo, mono, or SAP (second audio program) for the TV sound. Caption Press Caption to scr
HP MR4000N, 26 Index N noise reduction, 21 O On-Screen Menu using, 11–21 P parental locks, 17 R ratings, 16 rear panel connectors, 4 remote control buttons, 9 replacing batteries, 10 using, 9 resolution select, 4 RF input, 4 S safety, 1–2 precautions, 2 screen format, 18 setup menu, 18 signal strength, 14 sound, 20 specifications general, 23 RF, 23 T time daylight saving, 19 time zone, 19 troubleshooting, 22 turning off, 9 turning on, 9 V video noise reduction, 21
Using the HP HDTV Tuner 11 Use the arrow buttons on the remote control to scroll through the programs listed in your guide. Highlighting a program gives you the following information: • Time the program begins and ends. • Channel the program is on. • Name of the program. • Closed captioning availability. • Format of the program broadcast (high de
HP MR4000N, 22 Troubleshooting Troubleshooting Problem Remedy The HP HDTV Tuner is not receiving power and the Power LED on the front does not light up. Plug the power cord into a different power outlet. Make sure the power outlet works by plugging in another item such as a lamp. There is no picture or sound. Use your remote control to enter a channel number that worked the last time you used your HDTV Tuner. Double-check all cable connections. Check your Resolution Select setting. Check your DTV Out selection. Adjust your anten
HP MR4000N, 16 Using the HP HDTV Tuner Digital service font You can customize the appearance of your captions. Follow these steps to change the size, style, and color of your caption fonts: 1 Press the Menu button on your remote control. 2 Highlight Caption, and press the Select button. 3 Highlight Digital Service Font, and press the Select button. 4 Use the Up and Down arrow buttons on the remote control to highlight a format, and press the Select button. Using the Lock Menu The lock feature enables you to set a password to view movies
HP MR4000N, 4 Setup Setup Rear Panel Connectors RF Input (labeled AIR 75 ohm) Connect an outdoor or indoor antenna. Monitor Out Connect composite cables to your TV or monitor. Insert the yellow video cable into the Video connector and the white and red cables into the Audio L and R connectors, respectively. Component Out Connect component cables to your TV or monitor. Insert the green, blue, and red video cables into the Y, Pb, and Pr connectors and the white and red cables into the Audio L and R connectors, respectively. Digital Audio Out Connect a cable from the digital audio input of your audio receiver. Resolution Select Ch
HP MR4000N, Using the HP HDTV Tuner 19 Zoom Zoom adjusts to a wide movie format that fills the entire screen. Left and right portions of the picture are cropped. NOTE: If the input source signal is set to 16:9, the default mode is letter box. If the input source signal is set to 4:3, the default mode is full. 16:9 ratio When using a 16:9 aspect ratio, and receiving an image with a 4:3 aspect ratio, you need to specify how the image is displayed. Choose one of the three following options: Pillar box Pillar box centers the picture with blank panels on the left and right side
HP MR4000N, Index 25 Index 1080i interlaced scanning, 4 480i interlaced scanning, 4 480p progressive scanning, 4 720p progressive scanning, 4 A analog MTS, 20 analog TV connecting, 7 audio equipment connecting, 7 C caption analog mode, 14 digital service, 15 digital service font, 16 digital service info, 15 lock menu, 16 on/off, 14 caption menu, 14 channel add/delete, 12 favorite, 12 fine tune, 13 channel menu, 12 component connector (YPbPr) connecting, 6 component out, 4 composite connector connecting, 7 connecting analog TV, 7 audio equipment, 7 component connector (YPbPr), 6 composite con
Setup 7 Connecting to an analog TV (composite) 1 Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). 2 Insert the yellow cable into the Video connector in the Monitor Out section. 3 Insert the white and red audio cables into the L and R Audio connectors of the Monitor Out section. 4 Insert the other end of the yellow cable into the Composite
HP MR4000N, 8 Using the HP HDTV Tuner Using the HP HDTV Tuner Front Panel Controls • Power button: Press to turn the power on and off. • Menu button: Press to display the On-Screen Menu. • Power LED: A red light appears when the power is on. • Arrow and Enter buttons: Press to navigate the On-Screen Menu. • DTV LED: A green light appears when you are on a channel receiving a digital signal. • Info button: Press to display the following information: current HDTV Tuner settings, the channel number, captioning settings, the program title, the time, the program duration, the picture grade,
HP MR4000N, Using the HP HDTV Tuner 15 Digital service Digital captions are displayed on digital channels. Follow these steps to choose a type of digital service: 1 Press the Menu button on your remote control. 2 Highlight Caption, and press the Select button. 3 Highlight Digital Service, and press the Select button. 4 Use the arrow buttons on the remote control to highlight a digital service, and press the Select button. Digital service info The Digital Service Info screen displays the language assigned to each service. When “Yes” appears in the Easy Reader column, it indicates the captions have been edited to an easier reading level.
HP MR4000N, Using the HP HDTV Tuner 13 4 Use the remote control number keys to enter the channel you want to add or delete. Or Use the Up and Down arrow buttons to go to the channel you want to add or delete. 5 Press the Select button on your remote control to add or delete the channel. Fine tuning channels Fine tuning manually adjusts the TV’s tuner. Follow these steps to fine tune a channel: 1 Press the Menu button on your remote control. 2 Highlight Channel, and press the Select button. 3 Highlight Fine Tune Channel, and press the Select button. 4 Highlight Manual, and press the Select button.
HP MR4000N, Using the HP HDTV Tuner 17 5 Highlight Rating Setting, and press the Select button. 6 Use the arrow buttons on the remote control to move your cursor into the block you would like to lock. Press the Select button to lock the rating. NOTE: If you forget your PIN and would like to reset it, enter the following key sequence on your remote control: MTS, 3, 5, 9. Important notes about parental locks Following are explanations of the MPAA and TV (FCC) rating codes. TV (FCC) age categories TV
HP MR4000N, 20 Using the HP HDTV Tuner Sound A digital TV transmission can receive simultaneous audio tracks. It can receive simultaneous translations of a program into foreign languages called multitracks. Analog Multi-Channel Television Sound (MTS) Follow these steps to choose your analog MTS setting: 1 Press the Menu button on your remote control. 2 Highlight Setup, and press the Select button. 3 Highlight Sound, and press the Select button. 4 Highlight Analog MTS, and press the Select button. 5 Use the arrow buttons to highlight your choice of Mono, Stereo, or SAP, and press the Select button. 6 Press the Exit button to return t
HP MR4000N, 12 Using the HP HDTV Tuner Using the Channel Menu To display the Channel menu, press the Menu button on your remote control, select (highlight) the Channel option, and press the Select button. Using auto memorizing to set up your channels Auto memorizing scans for a signal for all of the VHF and UHF channels in your area. If a signal is found, it adds the channel to your channel list. Follow these steps to set auto memorizing for your channels: 1 Press the Menu button on your remote control. 2 Highlight Channel, and press the Select button.
2 Safety Precautions: DANGEROUS VOLTAGE: Do not attempt to repair your HDTV Tuner yourself. Removing the top cover of the HDTV Tuner may cause fire or electric shock. If any of the following conditions occur, unplug the HDTV Tuner from the wall and contact a qualified service professional: • The power cord or plug is damaged. • Liquid is spille
HP MR4000N, 18 Using the HP HDTV Tuner The MPAA rating system (movies) G: General audience. No restriction. PG: Parental guidance suggested. Some material may be unsuitable for children. PG-13: Parents strongly cautioned. Some material may be unsuitable for children under the age of 13. R: Restricted. Viewers should be 17 or older. NC-17: Not classified. Viewers should be 17 or older. X: Adults only. • TV (FCC) guidelines: When you lock a rating such as the TV-PG rating and all of its V, S, L, and D subcategories, the “more restrictive” ratings (TV-14 and TV-MA) and all of their V, S, L, and D subcategories are automatically locked o
DOWNLOAD |
HP LC2640N TV Receiver Operation & user’s manual
LC2640N |
HP LT3200 TV Receiver Illustrated parts & service map
LT3200 |
HP PhotoSmart C500 TV Receiver Reference manual
PhotoSmart C500 |
HP md5020n TV Receiver Operation & user’s manual
md5020n |
HP MediaSmart SL4282N TV Receiver Quick start manual
MediaSmart SL4282N |
HP LC2640N TV Receiver Start here
LC2640N |
HP PL4260N - 42" Plasma TV TV Receiver Product dimensions
PL4260N - 42" Plasma TV |
HP Compaq Presario,Presario CQ5110F TV Receiver Operation & user’s manual
Compaq Presario,Presario CQ5110F |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Electrolux | GT21L | Instruction manual | electrolux/gt21l-I6L.pdf | 06 Aug 2022 | 12 | 0.47 Mb |
2 | Porter-Cable | N030679 | Instruction manual | porter-cable/n030679-4XP.pdf | 29 Dec 2023 | 92 | |
3 | Casio | Exilim EX-ZS12 | Operation & user’s manual | casio/exilim-ex-zs12-456.pdf | 07 Apr 2023 | 136 | 3.24 Mb |
4 | Toshiba | Strata CTX ACD Application | Manual | toshiba/strata-ctx-acd-application-S2S.pdf | 04 Aug 2023 | 1 | 0.01 Mb |
5 | GE | GE Energy Star WBVH5300K | Dimensions and installation information | ge/ge-energy-star-wbvh5300k-R77.pdf | 11 Feb 2024 | 3 | 0.38 Mb |
6 | Epson | STYLUS 850Ne | Operation & user’s manual | epson/stylus-850ne-9UL.pdf | 02 Jan 2024 | 139 | 8.12 Mb |
Kramer
PT-872xr Quick Start (P/N: 2900-301005QS REV 1) P/N: 2900- 301005 QS Rev: 1 Scan for full manual PT-872xr Quick Start Guide This guide helps you install and use your PT-872xr for the first time. Go to www.kramerav.com/downloads/PT-872xr to download the latest user manual and check if firmware upgrades are available. Step 1: Check what’s in the …
PT-872xr(2 pages) |
Dish TV
Quick Start GuideS7070 S7070Thank you for choosing Dish TV for your Freeview satellite receiver. This guide will provide you with simple instructions for connecting and operating your Dish TV unit.Further help can be found at www.dishtv.co.nzBefore you startPlease check that your Dish TV box contains all of the following components.Inserting the batteries.� …
S7070(2 pages) |
Elgato
Quick Start GuideConnect DVB-T antennahybridWhat’s in the boxConnect active antennahybridhybridhybrid Stick Antenna Remote USB Cable Video Cable CD Activation KeyConnecting a rod antennaPull off the grey protective cap and connect EyeTV Hybrid to a free USB 2.0 port on your computer. You can connect the stick directly or via the supplied USB extensi …
Eye TV Hybrid(2 pages) |
Haier
COLOUR TV RECEIVER OWNER'S MANUALPlease read this manual carefully before operating the unit, and keep it for future reference. The Owner's Manual for the Follow Model: 21FA10-AM
…
21FA10-AM(32 pages) |
TV Star
1 DIGITAL CABLE TV RECEIVER TV STAR C101 USER MANUAL
…
C101(24 pages) |
Mipro
ACT-71 / ACT-72 / ACT-74Wideband True Diversity ReceiverAll rights reserved. Do not copy or forward without prior approvals MIPRO.Specifications and design subject to change without notice. MN 014/07User Guide2 CE 4 6 7 B
…
ACT-71(15 pages) |
Eminence Speakers Acoustinator CX2008Eminence Acoustinator CX2008 Speakers Brochure Acoustinator CX2008, 32 |
Braun Electric Shaver bodycruZer B 55Braun bodycruZer B 55 User Manual (Manual ), @4E8O19 bodycruZer B 55, 70 |
SEAS Amplifier 4040Amplifier #936JE9 4040, 4 |
Art Other PR8 PROOther Operation manual (Art PR8 PRO) PR8 PRO, 2 |
Bose TV Mount SM-1TV Mount #N8R682 SM-1, 2 |
Grizzly Nail Gun H8234PDF User Manual (@295Z63), Grizzly H8234 Nail Gun (06th Sep 2023) H8234, 20 |
Blanco Indoor Furnishing BLANCOTORINO 157-183Indoor Furnishing Specification sheet (Blanco BLANCOTORINO 157-183) BLANCOTORINO 157-183, 2 |
Packard Bell GPS NAVFDRIVENAVFDRIVE Operation & user’s manual - 7NL93X NAVFDRIVE, 18 |
Sony Blu-ray Player BDP-S1200BDP-S1200 (Blu-ray Player ePDF Guide, #6PB84E) BDP-S1200, 48 |
Sony Stereo System HCD-MD373Sony HCD-MD373 Guide (Doc Type: Stereo System Service manual) HCD-MD373, 98 |
Philips Clock Radio AJ3910#D7G7T4: AJ3910 Clock Radio Specifications AJ3910, 2 |
Poulan Pro Pole Saw 115261226Poulan Pro 115261226 Manual (Instruction manual), @ZILHX6 115261226, 14 |