Manualios.com

Humminbird AS RSL Operation Manual

Humminbird AS RSL Manual Online:

4.8, 818 votes
Humminbird AS RSL User Manual
Humminbird AS RSL User Guide
Humminbird AS RSL Online Manual

Text of Humminbird AS RSL User Guide:

  • Humminbird AS RSL, Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by design- ing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy-free of charge during the first year after purchase, and available at a reasonable rate after the one year period. For com

  • Humminbird AS RSL, How the WSL Works The Wireless Sonar Link (WSL) is a line-of-sight accessory that works with your Fishfinder to receive remote sonar signals from a Remote Sonar Sensor (RSS). Radio signals from the RSS are received by the WSL and are transmitted over the Accessory Bus to the control head. The control head displays the remote sonar information in a variety of formats. The WSL is a first-of-its-kind wireless Fishfinder that is incredibly easy to use. Simply attach the Remote Sonar Sensor (RSS) to the end of your fishing line and cast it into the water as you would a normal float or lure. Then power on the control head (with WSL attached and the correct version

  • Humminbird AS RSL, Determining the Software Version in the Control Head NOTE: You must have an installed and functioning fishfinder to perform the following. 1. When you start up the control head, press the menu key while the Title Screen is displayed, select System Status from the Start-up Menu, then press the VIEW button until you see Self Test. 2. Self Test will display the results of an internal diagnostic self test, including the software version. Make sure that your control head software version is 2.100 or higher. 3. If you do need a software upgrade, it is available free of charge from the www.humminbird.com website. If you do not have a way to access

  • Stem Mount (Existing Stem with 1" - 14 Thread) Follow these steps to stem mount the WSL antenna (stem not included): 1. Determine the best mounting location, then make sure that there is sufficient cable to route to the Fishfinder. Mark the mounting location, then drill a ⁵₈ " (15 mm) hole. 2. Place stem over ⁵₈ " (15 mm) hole and mount with

  • Humminbird AS RSL, Deck Mount - Cable Side, No Access Underneath Follow these steps to deck mount the WSL antenna in a situation where you must route the cable to the side because there is no space for a cable underneath the mounting loca- tion: 1. Determine the best mounting location, then make sure that there is sufficient cable to route to the fishfinder. 2. Place the mounting flange over the mounting location and mark through the three mounting holes for drilling. 3. Remove the mounting flange and drill holes using a ⁹₆₄ " (3.5 mm) drill bit. 4. Break out the marked tab on the bottom side, outer rim of the mounting flange. 5. Pre-assemble the mounting flange, moun

  • Humminbird AS RSL, Attaching the RSS The line coming from your reel can be tied off to the front hole in the Remote Sonar Sensor (RSS). If you wish to also use the RSS as a conventional float, use the second hole to attach your hook using a lighter weight line. A snag will break the lighter line if you have to break free. Slip line techniques are not recommended because of the higher risk of losing the RSS. If you do use the slip line method, use a lighter weight line after the lower stop, enabling retrieval of the RS

  • Operating the WSL Accessory When the WSL Accessory is attached to the control head, a SmartCast WSL View is added to the control head view rotation. When you press the VIEW key repeatedly, views are displayed cyclically. Any of the views, including the SmartCast WSL View, can be removed or added to the rotation list using the Select Views menu choice from the Setup Menu when in Adva

  • Humminbird AS RSL, WSL X-Press™ Menu When the SmartCast WSL View is displayed, pressing the MENU key once will display the WSL X-Press menu. The WSL X- Press menu represents the settings most frequently used to optimize the WSL performance. NOTE: The WSL X-Press Menu can only be accessed from the SmartCast WSL Full Screen view. It is not available in the PIP view. WWSSLL SSeennssiittiivviittyy - Select a higher number to show weaker sonar returns on the display, or a lower number to remove clut- ter from the display. Adjusting Sensitivity also affects how sonar returns a

  • Humminbird AS RSL, WSL Accessory Submenu When the WSL Accessory is attached to the control head, the Accessory menu tab in the Main Menu System will contain an additional SmartCast WSL menu choice which, when selected, leads to the SmartCast WSL Accessory Submenu. Press the MENU key twice to access the Main Menu tab choices. Use the 4-Way Cursor Control key to select the Accessory tab, and then scroll down to select the SmartCast WSL menu choice - use the RIGHT Cursor Control key to enter the WSL Accessory Submenu. PIP (Pi

  • Channel A and B RSS Units There are two versions of the RSS that are available at your local tackle dealer, major outdoor retailers, or at www.hummin- bird.com: Channel A and Channel B. The Channel A RSS unit comes standard with the WSL Accessory. You also have the option to purchase additional Channel A or Channel B RSS units. When using the A or B version of the RSS,

  • Humminbird AS RSL, Troubleshooting Do not attempt to repair the RSS or the WSL yourself. There are no user serviceable parts inside, and special tools and tech- niques are required for assembly to ensure the waterproof integrity of the housings. Repairs should be performed only by authorized Humminbird technicians. Many requests for repair received by Humminbird involve units that do not actually need repair. These units are returned "no problem found." If you have a problem with your RSS or WSL, use the following troubleshooting guide before calling the Customer Resource Center or sending your unit in for repair. 1. The

  • Humminbird AS RSL, 4. The WSL View shows many black dots at high sensitivity settings. You are seeing noise or interference caused by one of several sources. Noise can be caused by other electronic devices. Turn off any nearby electronics and see if the problem goes away. Other sonar devices or any electronic device operating in the 900 mHz range (in the 400 mHz for International versions) could cause interference with your RSS. 5. The WSL View shows fluctuating depth readings and excessive clutter, including vertical bars that may be drawn on top o

  • Humminbird AS RSL, Specifications WSL Specifica tions Power Requirement ............................................................................................................................ Provided by the control head Integral Cabling ...................................................................................................................................................... 20 feet (6 m) cable RSS Specifications Internal Lithium Battery.............................................................................................. One non-replaceable RSS Lithium battery

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Jabra SP500 - Bluetooth hands-free Speakerphone Specifications jabra/sp500-bluetooth-hands-free-speakerphone-5SV.pdf 24 Jul 2023 2
2 A.O. Smith GCVT-40 Instruction manual a-o-smith/gcvt-40-192.pdf 06 Oct 2022 24 0.58 Mb
3 Califone 2455PLC Specifications califone/2455plc-H43.pdf 22 Dec 2023 1 0.04 Mb
4 GE Power PRO series X600 Manual  ge/power-pro-series-x600-12Z.pdf 26 Jun 2022 2 0.37 Mb
5 NEC MultiSync XP29, XM29 Xtra Operation & user’s manual nec/multisync-xp29-xm29-xtra-NQK.pdf 28 Feb 2023 40
6 Fagor ELECTRIC COOKER 2190 Manual  fagor/electric-cooker-2190-RCZ.pdf 29 Jul 2022 7 0.2 Mb

Similar Resources:

  • NETGEAR

    Orbi RBR50

    (2 pages)
    Connect your computer or mobile device to the Orbi router or satellite with an Ethernet or WiFi connection.To connect with WiFi, find the preset WiFi network name (SSID) and password on the label on the Orbi router or satellite and connect to that network from your WiFi‑enabled computer or mobile device.Launch a web browser and visit orbilogin.com. If a l …
  • Asus

    DSL-N12E

    (2 pages)
    English1. Connect your devices.2. Before starting ADSL setting procedure, ensure that the ADSL indicator on DSL-N12E top panel become solid.3. In your web browser, key in http://192.168.1.1. In the pop-up window, key in the user name and password (user name/password: admin/admin). The Quick Internet Setup (QIS) wizard appears. * If the QIS web page do …
  • Asus

    RT-AC3200

    (220 pages)
    Quick Start Manual / Kullanım KlavuzuRT-AC3200Wireless-AC 3200 Tri-Band Gigabit Router¨EEU14365 / Revised Edition V2 / June 2018LEDWiFiUSB 3.0EEU14365_RT-AC3200_QSG_V2.indb 1 2018/6/15 16:11:01 …
  • Progress Lighting

    P2673

    (9 pages)
    A) WIFI Module installation 1. Place the Receiver upside down on a flat surface, to expose the Receiver Screw. 2. Remove and keep the Receiver Screw (Figure 1). 3. Slide the Blank off of the Receiver and dispose of the Blank 4. Flip the Receiver over to expose the Receiver Female Connector. 5. Slide the WIFI Module Male …
  • Fortinet

    FortiWiFi FortiWiFi-60A

    (2 pages)
    © Copyright 2007 Fortinet Incorporated. All rights reserved. Products mentioned in this document are trademarks or registered trade-marks of their respective holders.Regulatory ComplianceFCC Class A Part 15 CSA/CUS17 May 2007Checking the Package ContentsConnectingPlanning the ConfigurationINTERNALDMZ4321LINK 100 LINK 100 LINK 100 LINK 100 LINK 100 LINK 100 …
  • D-Link

    AC1200

    (2 pages)
    ENGLISHDIR-860LWireless AC1200Dual Band Gigabit Cloud RouterIf any of the above items are missing, please contact your reseller.DIR-860L Wireless AC1200 Dual Band Gigabit Cloud RouterPower AdapterEthernet CableWi-Fi Conguration CardQuick Install Guide1 Power LEDA solid green light indicates a proper connection to the power supply. The light will be …

Comments, Questions and Opinions: