Wintal STB1SD Manual 

Text of Wintal STB1SD User Guide:

• Wintal STB1SD, 1 Table of Contents SYMBOLS USED ON THE RECEIVER .......................................................................... 3 SAFETY INSTRUCTIONS .............................................................................................. 4 I.GENERAL INFORMATION ........................................................................................... 5 1. Preface ................................................................................................................. 5 2. Main Features ...................................................................................................... 5 3. General Operation of the Receiver.

• 2 4.3 Language .................................................................................................. 18 4.4 Time Setting .............................................................................................. 18 4.5 System Schedule ...................................................................................... 18 5. Accessory

• Wintal STB1SD, 3 SYMBOLS USED ON THE RECEIVER The next paragraphs explain the meaning of the symbols, present on the receiver. The Digital Video Broadcasting logo. A broadcast standard for digital radio and television using MEPG-2 compression. The caution risk of electrical shock - do not open symbol This symbol tells you that you are not allowed to open the receiver. Only authorized (service) technicians are allowed to open the box. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a ris

• Wintal STB1SD, 4 SAFETY INSTRUCTIONS Please read these safety instructions through carefully, before operating the receiver. Please observe all warnings and instructions on the equipment and contained in these operating instructions. Be sure to read this user’s manual before starting your operation. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. Install the unit horizontally. Unbalanced installation may cause the unit to be damaged by itself. When you don’t use this unit for a long time, please pull the power cord from the outlet. Also do not use a damaged power cord. When the unit is suddenly moved

• Wintal STB1SD, 5 I.GENERAL INFORMATION 1. Preface The Set top Box is a high cost-effective digital receiver. It is fully compliant with MPEG-2 and DVB-T standards. It provides the enhanced OSD Multi-language menu. Equipped with the latest technology and design, the receiver is ensured to offer high reliable performance for your digital life. 2. Main Features  Fully DVB-T & MPEG-2 Compliant  Software upgrade via RS-232 serial port  Parental lock  Multi-language Subtitle output supported  Multi-language OSD an

• Wintal STB1SD, 6  PAL/ NTSC/SECAM supported  Automatic power on/off supported  Logical channel number (LCN) Supported  Signal level & quality indicator  Standby with low consumption  Time adjustment  Antenna Feed 5V Supported 3. General Operation of the Receiver The everyday operation of your receiver is accessed via user friendly on screen displays and menus. These menus can help you get the most from your STB, guiding you through installation and channel manager with its various functions to enhance your viewing pleasure. All functions can be accessed through the Remote Control Unit and th

• 7 4. Front Panel : Press to switch between operation and standby modes MENU: Show the Main Menu and command box on the screen OK: Execute the selected item in the menu CH: When watching, change to the previous or next channel, or move to the next higher or lower item in the menu. VOL: When watching a channel, adjust the volume

• Wintal STB1SD, 8 5. Rear Panel RS232: Connect to a PC for software upgrade * for servicing purposes only ANT IN: Connect to a terrestrial antenna LOOP OUT: Connect to another receiver (RF loop through output from digital tuner) YPbPR: Component video output. Supports high definition output L/R AUDIO: This socket outputs analog audio L/R signal. COAXIAL: This socket connects to a coaxial socket on your surround sound system. S/P DIF: This socket connects to a hi-fi system VIDEO: This socket outputs composite video signal. S-VIDEO: This socket outputs separate S-Video signal. 100-240V~:

• Wintal STB1SD, 10 : Press to switch between Operation and Standby modes : Press to temporarily cut off the sound 0-9 : Enter required numbers in the input box or select a channel to watch RECALL: Press to switch back to previous channel INFO : Show information of the current channel MENU : Display the Main Menu on the screen EXIT : Press to return to the previous menu or escape from the item OK : Press to execute the selected item in the menu, or to confirm the desired value in input mode. : Move cursor up/down/left/right, Page up/down, Volume +/- p- / p+:

• 11 7. Installation of STB This section explains the installation of the receiver. Refer to the manuals supplied with the equipment for the installation of outdoor equipment such as the dish antenna. When adding new equipment, be sure to refer to the related parts of the manual for the installation. The default output for this STB is Component (Red, Gr

• Wintal STB1SD, 12 7.2 Connecting to TV using YPbPr support 7.3 Connecting to another receiver NOTE: This connection figure is for reference only. Connectors on the rear panel may be in different places or even be omitted due to different STB models.

• 13 II. MENU STRUCTURE Open the main menu by pressing the MENU button.  Program List  TV Program List  Music Program List  Sort  Program Search  Automatic Search  Manual Search  Parental Control  Channel Lock  Parental Setting  Change PIN  System Setting  Video Setup  Language  Time Setting 

• Wintal STB1SD, 14 1. Program List 1.1 TV Program List From the menu” TV Program List”, the user can rename, sort, lock and add channels to favorite. Select the list you want to modify, the TV-list and press the “OK” button.  Favorite Move the selector to the “Favor”-column. Select the channels you want to add as favorites by press the “OK” button. The selected favorite is marked with “ ”. In channel view mode, press the “FAV” button to display the favorites.  Move Select the channel that you want to move and

• Wintal STB1SD, 15 1.2 Music Program List This has the same operation as the 1.1 TV Program List. Please refer to point 1.1 above. 1.3 Sort The channels can be sorted in alphabetical order, by channel number or channel ID. The channel ID is assigned to each channel according to the broadcast information. The channel ID is different from the channel number. Go to the submenu ”Sort” and select the desired sorting method and press the [OK]-button. 2. Program Search The STB has provided two ways to search program: Automatic Search and Manual Search. 2.1 Automatic Search After pressing OK to enter the Automatic Search menu, the message wit

• Wintal STB1SD, 16 2.2 Manual search It’s possible to search for single transponders with the ”Manual Search”. Select the pre-defined channel no. with the desired parameters for the search. If the frequency of the selected channel is receiving a signal, the signal indication-bars will clearly indicate a per-centual signal strength and quality. Press the OK-button to start the search. The found channels will be added to the channel list. 3. Parental Control Parental Control enables the channel lock with a 4 digit security code. In the default setup the code is ”0000”. Enter the parental control submenu by entering the code with the numeric buttons and then selec

• 17 In this menu, move the cursor to the channel which you want to lock, and press OK, the locking mark will be display on the selected channel name. If you want to cancel the operation, press OK key again on the selected channel. NOTE: Unless you enter the correct password, you can not watch the locked channel. 3.3 Change PIN Change pin-code from the submenu selection ”Change PI

• Wintal STB1SD, 18 4.3 Language Select the menu language, and the default settings for audio and subtitling. 4.4 Time Setting In order to display the local time correctly, it may be necessary to set a time offset indicating the difference between local time and GMT. When GMT-time is active, the time information is received from the broadcast and adjusted according to the selected time zone. The time zone in Finland is +02:00 during normal time and +03:00during summer time. GMT usage: Select the ON or OFF. If select OFF, you c

• Wintal STB1SD, 19 End Time: Enter the end time by using the numeric key on the RCU. Channel No.: Select the desired channel No. After setting well, press OK to finish. The task can be set to inactive or active by using keys in the schedule. 5. Accessory 5.1 System Information In this menu, you can view the system version. 5.2 Factory Default Select the Factory Default item in the Accessory menu and press the OK key. A sub-menu will seek your confirmation. Select YES key to restore factory defaults. Note : Reset to Defaults should be used with care as all pro

• Wintal STB1SD, 20 5. Power on the slave STB, the upgrade will start automatically, 6. Power off the two STBS. 6. Plug off the 'RS232 serial cable'. 7. Now reset the STB and enjoy the fantastic DTV programs. 6. Shortcut Key Functions The basic TV and Radio functions of your receiver are described below: 6.1 Electronic Program Guide (EPG) In normal view mode, press GUIDE key on the RCU to get into EPG Info. The up-left side of this window is program list where you can use keys to select desired program. The content is shown in up-right PIG (pic

• Wintal STB1SD, 21 6.3 Audio Select Should a particular program be available in more than one language, under the non-menu mode, pressing AUDIO key on the RCU will display Audio Select menu. Keys are used to switch among the preprogrammed options. 6.4 Volume Audio Volume can be adjusted using on the RCU, for TV or Radio services. MUTE function is also available on the RCU. 6.5 Information On the non-menu mode, by pressing keys to select a channel, a channel bar, which includes current channel’s information and short EPG, will be shown at the bottom of the screen. If you want to know details about the current channel, pressing INFO key on the

• Wintal STB1SD, 22 III. TECHNICAL SPECIFICATION TUNER Input frequency 174 ~ 860MHz UHF & VHF Bandwidth 7MHz or 8 MHz Input level -72 ~ -20 dBm Input impedance 75Ω DEMODULATION Demodulation QPSK, 16QAM, 64QAM FEC 1/2, 2/3, 3/4, 5/6, 7/8 Mode 2K, 8K Guard 1/4, 1/8, 1/16, 1/32 DEMULTIPLEXER Standard ISO/IEC 13818-1 Input max. bit stream rate 104Mbps(Serial) / 7.5MBps(Parallel) VIDEO DECODING Standard ISO/IEC 13818-2 MPEG-2 MP@ML Aspect ratio 4:3, 16:9 Video resolution 720×576 (PAL), 720×480 (NTSC) AUDIO DECODING Standard ISO/IEC 13818-3

• Wintal STB1SD, 23 Output mode Mono, Dual-channel, Stereo Sample frequency 32, 44.1, 48KHz AV OUTPUT Video de-emphasis CCIR REC.405-1, 625LINES Video bandwidth 5.5MHz Video output impedance 75Ω Video output level 1.0Vp-p Audio output frequency 20Hz~ 20KHz Audio output Impedance Low POWER Input voltage 100-240~ Power consumption 15W max AMBIENT Operation temperature 0℃ ~ 40℃

• Wintal STB1SD, 24 IV. TROUBLE SHOOTING Note : If you cannot solve the problem by referring to the above trouble shooting, please contact your re-seller. Problem Possible Causes What To Do The display on the front panel does not light up. Main cable is not connected. Check that the main cable is plugged into power socket. No sound and picture, but the front panel shows time. The unit is in standby mode. Press the key on the RCU. No sound or picture. Poor signal quality or bad interconnections Check the ant

Related Products and Documents (TV Receiver):

Comparable Devices:

Similar Resources:

• AT&T U-verse TV (2 pages) AT&T IR U-verse TV Remote Control User GuideInstalling BatteriesThe remote control requires two AA size (1.5V) Alkaline batteries to work.Tips: replace the batteries every nine months for opti-mum performance.1. On the back of the remote control, press the battery cover tab forward, lift and remove the battery cover.2. Insert two (2) AA- …

• Yamaha RX-V573 (8 pages) Check that the following accessories are supplied with the product.The following cables (not supplied) are required to build the system described in this document.• Speaker cables (depending on the number of speakers)• HDMI cable (x2)• Audio pin cable (x1)• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])1 Prep …

• Samsung CK7202SX3S/NWT (49 pages) COLOR TELEVISION RECEIVERChassis : S51AModel: CK7202SX3S/NWTCOLOR TELEVISION RECEIVER CONTENTSPrecautionsSpecifications and IC DataDisassembly and ReassemblyAlignment and Adjustment TroubleshootingExploded View and Parts ListElectric Parts ListBlock DiagramPCB Layout DiagramWiring DiagramSchematic Diagrams1.2.3.4.5.6.7.8.9.10.11. …

• Skyway HD-0405M (8 pages) Quick Installation Guide V2.1.1 __________________________________________________________________________________________ PLEASE READ THIS QUICK GUIDE BEFORE OPERATING YOUR DVR H.264 High Definition DVR Quick Guide HD Models: HD-0405M, HD-0810M, HD-1620S Analog Models: N-0441U, N-0440MH, N-0840MH, N-1640MH [N-0441U] [HD-0405M, HD-0810M, N-0440MH …

• RCA M50WH74 (2 pages) 50” Diagonal DLP® High-Definition TelevisionFeatures and BenefitsBuilt-in HDTV/QAM Tuner for Access to Digital Programming Off-Air* or on CableDigital Cable Ready with CableCARD™ Input – No Cable Box Needed**Vibrant Color, Terrific Clarity & Contrast Without Motion Blur or Image Burn-inHome Theater Sound from Built-in 7-Band Graphic Equalizer or …

• Hitachi ACV01U - LCD Direct View TV (44 pages) Record the serial number of your A/V Center for future reference.SERIAL NO. This serial number is located on the bottom side of the unitANY QUESTION ABOUT THIS PRODUCT PLEASE CONTACT 800-HITACHIREAD THE ENCLOSED INSTRUCTIONS CAREFULLY.KEEP THIS OPERATING GUIDE FOR FUTURE REFERENCE.Operating GuideMode …

Comments, Questions and Opinions: