Manualios.com

ICP ICP Controller Using Manual

ICP ICP Controller Manual Online:

4.45, 1407 votes
ICP ICP Controller User Manual
ICP ICP Controller User Guide
ICP ICP Controller Online Manual

Text of ICP ICP Controller User Guide:

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO '8VLQJ0LFURVRIW06'26 After having explained the installation of the ICP Controller and the host-drives in chapters B and C, we now explain how to install the operating system MS-DOS. By using some ex- amples, we shall demonstrate how to partition a host-drive, transfer MS-DOS to the host- drive, install Windows 3.x and use a CD-ROM drive (standing for any other Not Direct Access Device) under MS-DOS. In addition, we will give you further information on how to install Windows 95. '7UDQVSDUHQF\RI+RVW'ULYHV The structure of the Host Drives, which have been

  • ICP ICP Controller,  &KDSWHU'8VLQJ0LFURVRIW06'26 Note: GDTSETUP.EXE as well as GDTX000.EXE are on the System Disk - DOS. (C) Now, in the program GDTSETUP, select the menu Configure Host Drives. Pressing <ENTER> leads you to the following sub-menu. In our example, the Host Drive list contains two Host Drives. The first drive in the list is not relevant for our example.

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO We select this Host Drive (by moving the selection line with the cursor keys n and p) and confirm our choice with <ENTER>. Then the following screen comes up: We now select Partition Drive and then View Partitions. The following screen appears. In our example, there is no entry yet. Press <ESC>, select Create Partition and press <ENTER>.

  •  &KDSWHU'8VLQJ0LFURVRIW06'26 In the upcoming window, select Primary Partition and confirm with <ENTER>. Now you can determine the size of the primary partition. In our example, we choose to use 1000MB of the disk capacity for the primary partition and therefore enter 1000 and simply confirm with <ENTER>. Now

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO (D) Now leave GDTSETUP by pressing <ESC>. After a few requests and messages from GDTSETUP, the system reboots. (E) Now use the MS-DOS program FORMAT to transfer MS-DOS to the primary partition you have just created. To do so, enter A:\> FORMAT C: /S <ENTER> (F) To complete the installation of MS-DOS, use the MS-DOS commands COPY or XCOPY to transfer the desired MS-DOS files. A different and maybe even more elegant method of installing MS-DOS is to use the SETUP program of MS-DOS versions 5 and 6. In this case, you only have to create and activate a partition with GDTSETUP or FDISK. Then boot the sy

  • ICP ICP Controller,  &KDSWHU'8VLQJ0LFURVRIW06'26 install=\dos\keyb.com GR,,\dos\keyboard.sys shell=\COMMAND.COM /E:512 /P device=gdtx000.exe device=mouse.sys device=\dos\setver.exe device=\dos\gdtxdos.exe device=\gdt\gdtaspi.exe device=\aspi\aswcdnec.sys /D:CD-ROM lastdrive=h In this example, besides the GDTX000 driver, the GDTXDOS.EXE driver, the GDT ASPI Man- ager and an ASPI Module for an NEC CD-ROM drive are loaded. '([SDQGHG0HPRU\0DQDJHUV When using Expanded Memory Managers, a certain address area has to be excluded from being controlled by these programs. Th

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO '8VLQJ:LQGRZV[ In order to be able to install Windows 3.x, a fully operational MS-DOS operating system has to be present on the chosen partition. Furthermore, the first entry in the CONFIG.SYS file behind the HIMEM.SYS line has to be: DEVICE=GDTX000.EXE (if necessary, add the correct path name after the "=" symbol and before GDTX000.EXE). (A) Now install Windows according to the instructions given in the Windows manual. Gen- erally, you start with Disk 1 - Setup from which you load the setup program. This Setup pro- gram guides you through the entire installation and prompts you to insert fu

  • ICP ICP Controller,  &KDSWHU'8VLQJ0LFURVRIW06'26 dows - unlike, for example, hard disks and removable hard disks. To install and access these devices, a special standard, the so-called ASPI Standard (Advanced SCSI programming In- terface), has been created. While the manufacturer of the controller (in this case ICP) has to offer the ASPI Manager, the manufacturer of the SCSI device (CD-ROMs etc.) has to provide an ASPI Module (note: there are some companies which have specialized in the develop- ment of ASPI modules, for example Corel Corp. with its product corelSCSI; the ICP Con- troller is cert

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO AUTOEXEC.BAT path=c:\;c:\dos;c:\gdt;c:\aspi; prompt $P -$G doskey c:\aspi\mscdex /D:CD-ROM The GDTX000.EXE driver is loaded from the first line following the HIMEM.SYS command of the CONFIG.SYS file. Loading the SETVER driver (part of MS-DOS) allows older versions of Microsoft's CD-ROM translation program MSCDEX (loaded from AUTOEXEC.BAT) to run trouble-free with the MS-DOS version currently installed. The next line loads the GDT ASPI Manager GDTASPI.EXE. Next, the ASPICD module for the CD-ROM drive is loaded. The pa- rameter "

  •  &KDSWHU'8VLQJ0LFURVRIW06'26 The first line following the HIMEM.SYS command of the CONFIG.SYS file loads the GDTX000.EXE. The next line loads the GDT ASPI Manager GDTASPI.EXE. Next, the corel ASPI Module for the CD-ROM drive is loaded. The parameter "/D:MSCD000" has nothing to do with a drive name, it only serves a

  •  &KDSWHU'8VHUV0DQXDO '1RWHVRQ$5&VRORIURP&KH\HQQH The following notes refer to the installation and the use of ARCsolo in connection with ICP Controllers. ARCsolo accesses tape back-up devices (tapes, DAT) through the ASPI inter- face. Consequently, the GDT ASPI Manager has to be included in the CONFIG.SY

  • ICP ICP Controller,  &KDSWHU'8VLQJ0LFURVRIW06'26 '7KH*'7$63,0DQDJHU*'7$63,(;( The GDT ASPI Manager GDTASPI.EXE allows you not only to run Not Direct Access Devices (e.g., CD-ROMs, tapes, MODs etc.), but to control hard disks and removable hard disks, too (the so-called Direct Access Devices). These devices are then no longer controlled by GDTSETUP but exclusively by the ASPI interface. The advantage is evident, in particular with regard to re- movable hard disks (for example SyQuest). When using an appropriate ASPI module to ac- cess these removable hard disks, for e

  • ICP ICP Controller,  &KDSWHU'8VHUV0DQXDO Step 2: Use the ASW program AFDISK.EXE to initialize the drive to be run through the ASPI interface. Step 3: After the successful initialization, do a warm reboot (Ctrl+Alt+Del). The CONFIG.SYS will be similar to the following (the relevant entries are printed bold): device=gdtx000.exe files=30 buffers=30 stacks=9,256 shell=\COMMAND.COM /E:512 /P device=\gdt\gdtxdos.exe device=\gdt\gdtaspi.exe /R:H1I4 device=aspidisk.sys Note: Drives run with ASPIDISK.SYS are not compatible with drives run with GDTSETUP. &

  • ICP ICP Controller,  &KDSWHU'8VLQJ0LFURVRIW06'26 Step 2 Install Windows 95 following to the instructions given by the Windows 95 installation soft- ware. Windows 95 uses the INT13H BIOS functions to access the Host Drives of the ICP Controller. Step 3 This step aims on the installation of the GDT high performance Windows 95 driver, called GDTX.MPD. Once it is installed and activated, it replaces the restricted INT13H BIOS func- tions. 1. Boot Windows 95 2. Click the 6WDUW button on the Windows 95 task bar and then select 6HWWLQJV 3. Click

Related Products and Documents (Software):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Tripp Lite N424-05M Specification sheet tripp-lite/n424-05m-LEX.pdf 04 Jul 2023 2 0.11 Mb
2 Philips HDRW720 Specifications philips/hdrw720-WRN.pdf 09 Oct 2023 3 0.45 Mb
3 Vivotek IP3112 Quick installation manual vivotek/ip3112-Z87.pdf 06 Sep 2022 6 1.06 Mb
4 X4-TECH EQ-1000 Operation manual x4-tech/eq-1000-W2J.pdf 29 Oct 2023 5
5 Fisher-Price BRILLIANT BASIC K6670 Operation & user’s manual fisher-price/brilliant-basic-k6670-257.pdf 16 Sep 2023 6 0.53 Mb
6 Sanyo CAS-A900 Instruction manual sanyo/cas-a900-98U.pdf 23 Dec 2023 38 2.58 Mb

Similar Resources:

  • Omron

    SYSMAC CS Series

    (297 pages)
    Cat. No. W409-E2-03 Note: Specifications subject to change without notice.SYSMAC CS/CJ-series, PROFIBUS DP Master Units OPERATION MANUALCat. No. W409-E2-03OPERATION MANUALPROFIBUS Master UnitsSYSMAC CS/CJ-seriesCS1W-PRM21CJ1W-PRM21Cat. No. W409-E2-04Authorised Distributor:Printed in EuropeW409-E2-02+CS(CJ)1W-PRM21+OperManual.qxd 21.07.2005 16:13 Seite 1 …
  • Epson

    C11C501061 - Stylus Photo 900 Color Inkjet Printer

    (2 pages)
    1 Remove everything from the box.2 Remove all the blue tape and packing materials inside and around the printer.3 Open the printer cover andremove the plastic piecefrom the ink cartridge holder.UnpackUnpackTurn On the PrinterTurn On the PrinterTurn overInsert the paper support into its slots on the back of the sheet feeder. (To install the roll paper holders …
  • Allied Telesis

    AT-9448T/SP

    (3 pages)
    Allied Telesis www.alliedtelesis.comDatasheet | SwitchesAT-9448T/SP 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP BaysAT-9448T/SPLayer 3 switch with 48 ports 10/100/1000Tplus 4 combo SFP baysProduct Overview As a member of the 9400 series the AT-9448T/SP is a managed Gigabit Ethernetswitch with a 1RU form factor and rich QoSfunctionality. It i …
  • Nokia

    E62

    (2 pages)
    Good Mobile Messaging Setup GuideGood Mobile Messaging Setup GuideWith Good Mobile Messaging, you can wirelessly access your corporate email, calendar, contacts, notes and task lists from your Nokia E62. This information is automatically delivered to your device, allowing access to important messages and more. This guide explains how to set up and use Good M …
  • NEC

    POWERMATE ES 5250 - S

    (18 pages)
    NEC PowerMate ES 5250 Series Release Notes 1NEC PowerMate® ES 5250 SeriesRelease NotesThe PowerMate ES 5250 Series Release Notes provide up-to-date informationon installing the applications that come with your computer. These notes alsoprovide additional valuable information about your computer that was notincluded in the printed user’s guide or online …
  • Navitar

    12X Zoom

    (23 pages)
    Navitar Motorized Zoom Systems Instruction Manual for Windows Revision B Page 1 of 23 2/17/2004 NAVITAR MOTORIZED ZOOM SYSTEMS INSTRUCTION MANUAL FOR WINDOWS …

Comments, Questions and Opinions: