Intermec SR30 Operation & User’s Manual

Text of Intermec SR30 User Guide:

• Intermec SR30, Chapter 4 — Default Settings 28 SR30 Handheld Scanner User’s Guide Symbologies Command Default Value Disable all symbologies N/A Disable all extended reading ranges N/A Codabar Not active Code 11 Not active Code 39 Active Reading range Extended Reading tolerance High Code 93/Code 93i Not active Code 128/EAN 128 Active Reading range Extended Reading tolerance High ISBT 128 Not active GTIN processing for EAN128 Not active Irregular EAN 128 Active Interleaved 2 of 5 Not active Reading range Extended Reading tolerance High Matrix 2 of 5 Not active MSI Code Not active Plessey Code Not active RSS RSS 14 Not activ

• Intermec SR30, Chapter 2 — Connecting and Configuring the SR30 10 SR30 Handheld Scanner User’s Guide International Keyboard Bar Codes If your SR30 is connected to a host with a USB cable or a keyboard wedge cable, you may need to configure your SR30 for an International keyboard. * = default North America* French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000 German Windows Spanish Windows Italian Windows Swedish Windows UK English Windows Brazilian Portuguese Windows

• Chapter 3 — Troubleshooting and Maintaining the SR30 20 SR30 Handheld Scanner User’s Guide 3 Scan the Reset Factory Defaults bar code: Reset factory defaults 4 Start EasySet version 5.4.4.0 or later. 5 Verify that your SR30 is communicating with the host PC. a From EasySet, select Communication > Connect. b Select the appropriate connection parameters,

• Intermec SR30, Chapter 4 — Default Settings 26 SR30 Handheld Scanner User’s Guide Default Configuration Use the following tables to see the default values of the configuration commands supported on your SR30. The commands are grouped by function and reflect the organization of the Commands window in EasySet version 5.4.4.0 or later. For detailed command descriptions, see the EasySet online help. The latest version of EasySet is available at no charge from the Intermec web site at www.intermec.com. Reset All Parameters Command Default Value Reset factory defaults except locked parameters N/A Terminal/Cash Register Used in Yo

• Intermec SR30, Chapter 2 — Connecting and Configuring the SR30 6 SR30 Handheld Scanner User’s Guide Connecting Your SR30 to a Host Device To connect your SR30 to a host device, you need the appropriate accessory cable. For a list and description of each cable, see “Cable Accessories” on page 35. Creating a USB Connection 1 Make sure that you have the USB cable (P/N 236-164-xxx). 2 Turn on your host device. 3 Connect the cable to your SR30 and host device. 4 If you are using Intermec POS software: a Scan this bar code. USB cable mode - generic HID b Downloa

• Intermec SR30, Chapter 2 — Connecting and Configuring the SR30 SR30 Handheld Scanner User’s Guide 7 Creating an RS-232 Connection 1 Make sure that you have the appropriate RS-232 cable (P/N 236-159-xxx, P/N 236-161-xxx, P/N 236-166-xxx, or P/N 236-167-xxx) for your host device and appropriate power supply (if necessary). 2 Turn off your host device. 3 Connect the cable to your SR30 and host device. 4 If you are using the external power RS-232 cable, connect the power supply to the RS-232 cable and an AC power outlet. 5 Turn o

• Intermec SR30, Before You Begin vi SR30 Handheld Scanner User’s Guide Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. Telephone Support These services are

• Intermec SR30, Chapter 1 — Learning About the SR30 4 SR30 Handheld Scanner User’s Guide If you are using bar code labels that are encoded in a different symbology, you need to enable the symbology on your SR30. Use EasySet version 5.4.4.0 or later to enable and disable symbologies for your scanner. EasySet is available on the CD that ships with the SR30 or from the Intermec web site at www.intermec.com. To scan a bar code 1 Point the scanner window at the bar code label and hold the SR30 steady about an arm’s length from the label. 2 Pull the tr

• Intermec SR30, SR30 Handheld Scanner User’s Guide 5 2 Connecting and Configuring the SR30 Use this chapter to understand how to connect the SR30 to a host device and configure the SR30. This chapter covers these topics: • Connecting Your SR30 to a Host Device • Configuring Your SR30 Parameters • Downloading Point of Service (POS) Software

• Intermec SR30, Contents SR30 Handheld Scanner User’s Guide iii Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .v Global Services and Support . . . . . . . . . . . . . . . . . .v Warranty Information . . . . . . . . . . . . . . . v Web Support . . . . . . . . . . . . . . . . . . . . . vi Telephone Support . . . . . . . . . . . . . . . . vi Service Location Support . . . . . . . . . . . .vii Who

• Intermec SR30, Before You Begin SR30 Handheld Scanner User’s Guide vii Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click Contact. Service Location Support For the most current listing of service locations, click Support > Returns and Repairs > Repair Locations. For technical support in South Korea, use the after service locations listed below: AWOO Systems 102-1304 SK Ventium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 E-m

• Chapter 3 — Troubleshooting and Maintaining the SR30 SR30 Handheld Scanner User’s Guide 19 Maintaining the SR30 To keep your SR30 in good working order, you may need to upgrade the SR30 and clean the scanner window. Upgrading the SR30 The SR30 contains a Host Interface Processor (HIP). You can upgrade the HIP firmware. To upgrade the SR30, you need: • an RS-232 accessory cable. For mo

• Intermec SR30, Chapter 3 — Troubleshooting and Maintaining the SR30 SR30 Handheld Scanner User’s Guide 21 10 From the To o l s menu, select Upgrade product firmware. The Firmware Download window appears. The model number of the scan engine installed in the SR30 (EV12) is selected. 11 Click OK. The Firmware selection window appears. 12 Click Browse to browse to the location of the HIP firmware upgrade file, select the file, and click Open.

• Intermec SR30, ii SR30 Handheld Scanner User’s Guide Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2007 by Intermec Technologies Corporation. All rights re

More Instructions:

	Intermec SR30 Quick start manual 10-03-2024 2	DOWNLOAD
	Intermec SR30 Operation & user’s manual 24-11-2023 56	DOWNLOAD
	Intermec SR30 Instructions 05-11-2023 2	DOWNLOAD

Related Products and Documents (Scanner):

Comparable Devices:

Similar Resources:

• RIOTEC DC9263A (3 pages) 1 Programming Quick Guide -DC9263A: Wearable Scanner Wearable Scanner: Press the ring trigger to enable the scanner.  Installation They are Plug &Play USB (HID) devices. When plugged into your Android OTG devices, it can be recognized as barcode scanner and begin to scan the barcode. Before using scanner, make sure …

• Canon P-208 (124 pages) SERVICEMANUALwithParts CatalogimageFORMULA P-208P-208IICOPYRIGHT © 2015 CANON INC.CANON imageFORMULA P-208/P-208II Rev. 0 PRINTED IN U.S.A.March 11, 2015 Rev. 0 …

• Contex HD Ultra X Series (6 pages) June 2018 OTAC Replacement Work Instruction Tools required:  T10 screwdriver  Pliers  T20 screwdriver  E-clip Tool (size 5)  Small Flat Screwdriver Prerequisite  Disconnect power from the scanner. Removing the OTAC Unit 1. Open the OTAC Assembly by depressing the Lid Latches at both ends. 2. Use a cloth (or similar) to co …

• Psion Teklogix LS3400 (2 pages) LS3400 Laser Scanner FamilyThe LS3400 Scanner family consists of four rugged scannersrated at IP65 and suited to scanning 1D bar codes inindustrial environments.LS3408ER:This extended range tethered laser scanner hasan exceptionally wide working range from 10cm (4 inches)to 14.6m (45 feet).LS3408FZ: Fuzzy logic technology allows this tethered laserscanner t …

• Epson PowerLite 735c (13 pages) EPSON PowerLite 735c Projector2/03 EPSON PowerLite 735c Projector - 1Projector Specifications GeneralType of display Poly-silicon Thin Film Transistor(TFT), active matrixSize of LCD panels Diagonal: 0.9 inch (22.9 mm) Lens F=1.9 to 2.1, f=31 to 36 mmResolution 1024 × 768 pixels (native format)Color reproduction 24 bit, 16.8 million colorsBrightness 2000 l …

• Sonomed E-Z Scan 5500+ Series (44 pages) E-Z Scan 5500+ SeriesTMAB5500+ CombinedA-Scan / B-ScanB5500+ B-Scan5550-A-1901-1COperators ManualSonomed, Inc.A Subsidiary of Escalon Medical1979 Marcus AvenueLake Success, NY 11042 USATel 800-227-1285516-354-0900Fax 516-354-5902www.sonomedinc.com0413 …

Comments, Questions and Opinions: