Manualios.com

IOGear GHPB01 Operation & User’s Manual

IOGear GHPB01 Manual Online:

4.25, 2290 votes
IOGear GHPB01 User Manual
IOGear GHPB01 User Guide
IOGear GHPB01 Online Manual

Text of IOGear GHPB01 User Guide:

  • IOGear GHPB01, Troubleshooting Frequently Asked Questions/Troubleshooting 1. Will HomePlug work in my house or apartment? If the house or apartment was built under U.S. building standards using copper wiring, then it will work. 2. What types of security problems will I be facing? If your house is on the same power grid as your neighbor, then there is a potential for a hacker to get in through your neighbor's house. However, this is easily remedied by activating the encryption key on the HomePlug device. 3. Will HomePlug work with Mac? There is currently no software that supports Macs. However, the HomePlug Ethernet Bridge will work with Mac when used as a bridge. Also, by installi

  • IOGear GHPB01, The new setting will take effect after you restart the computer. Click "Yes" to restart the computer. Congratulations, you have completed configuring this computer! After setting up networks on all your computers on the network, you will be able to use your HomePlug network to share files, printers, and Internet connections. Networking Basics 37

  • IOGear GHPB01, 6. Once your HomePlug Network has been configured, click Next. If other de- vices are present on the HomePlug net- work, their MAC addresses will be shown in "HomePlug Network De- vices". 19 Network Configuration

  • IOGear GHPB01, Introduction 6 Front View: (Drawing) 1. Power LED - lights up in green when plugged into a power outlet 2. Collision LED - lights up in green whenever there is collision 3. Link LED - lights up in green after plugged into a power outlet 4. ACT LED - blinks in green when there is network activity 5. Ethernet port - connecting to the computer 6. Normal/Uplink button - you only need to use this button when connecting the bridge to a switch/hub. Push this button when connects to the Uplink port on a switch. Another c

  • IOGear GHPB01, 2. In the following window, click on "Share this Printer" and type in the share name you would like. After this is done, click on "Ap- ply" and then "OK". Networking Basics 49

  • IOGear GHPB01, IOGEAR's HomePlug to Ethernet Bridge allows you to network your computers via your existing home power lines. It offers a data transmission speed of up to 14 Mbps, and reaches up to 990 feet through standard power lines. Package contents: 1. HomePlug to Ethernet Bridge 2. CAT5 patch cable 3. Power cable 4. User Manual 5. Warranty Registration Card Introduction 5 1. 2. 3.

  • IOGear GHPB01, Getting Technical Support 68 1) What is the purchase date and serial number of the product? 2) Were any messages displayed on the screen when the error occurred? If so, what was the exact wording of the message? 3) What type of Computer are you using? 4) When does the problem occur? 5) Can the problem be reproduced? If so, what are the steps necessary to reproduce the problem? 6) What version of the OS are you using? 7) Are you on a network? If so, what type of network is it? 8) What have you already tried to get the problem resolved?

  • IOGear GHPB01, Installation 7. Enter a username and organiza- tion name, and continue installa- tion. (Username and Organiza- tion have no importance in device operation. This window might look slightly different on other plat- forms.) 10

  • IOGear GHPB01, Overview IOGEAR's HomePlug Powerline Network Ethernet Bridge allows you to network your home comput- ers through the electric power lines in the house. Setting up a home network has never been so simple, just connect your computer to the HomePlug Bridge via the CAT5 patch cable provided in the package, and then plug the power end to your AC power outlet, you are connected! This unit is compliant to HomePlug Powerline Specification 1.0 and offers up to 14 Mbps bandwidth while being less prone to interference. By offering 56-bit DES encryption, it is also much more secure than other home networking technologies such as wireless Ethernet. 2

  • IOGear GHPB01, Topic 4. Sharing Disks/Folders Once the network has been checked / configured, you can access other systems via "My Network Places". To allow other systems to access data on your disks / in your folders, you have to give permission to share your disks and/or folders. 1. Select the disk (or the folder) to be shared (for example in "My Computer") and right-click on the icon of the disk to get the Context / popup-menu; select "Sharing and Security." It is recommended to share only folders instead of the disk drive to avoid any security related issues.

  • IOGear GHPB01, be on one network. If devices do not have the same encryption password, they will not be able to communicate with each other. 8. What OS does the HomePlug utility software fully support? Windows 98SE, ME, XP, and 2000. Windows NT and Mac are only supported by the HomePlug Ethernet Bridge (Without installing the HomePlug software with default operat- ing mode as BRIDGE, not NODE) 9. What is the Range of HomePlug? Approximately 990 feet (300 meters) in wall power lines. 10. How does 56bit-DES compare with Wireless 802.11b 128bit-WEP encryption? 56bit-DES is superior because of its DES type Encryption. Just because 802.11B us

  • IOGear GHPB01, Topic 3: Assigning a Static IP Address (Note: If you use DHCP-capable gateway/router, you don't need to assign any static IP addresses because the gateway/router will automatically as- sign IP addresses to the computers on the net- work.) Go to Start>Settings>Control Panel>Network Connections>Local Area Connection Right click on Local Area Connection, then double click on Properties, you will see a window similar to this: Select “Internet Protocol (TCP/IP)” and then click on Properties. Networking Basics 40

  • Troubleshooting 64 4. What is the difference between bridge mode and node mode in the HomePlug Ethernet Bridge (GHPB01)? Bridge mode operates without software installation and can work with any 10/100Base-T or 10Base-T Ethernet connections. By connecting the bridge to a router, switch, or Ethernet based device (XBOX, PlayStation, Web Tablet, PocketPC, Computer, etc.), you will be able to

  • IOGear GHPB01, To help IOGEAR® customers obtain the highest level of performance from their HomePlug devices, the IOGEAR® Service Support team is available to answer your technical ques- tions. Do not hesitate to call if you are having trouble getting your device to work correctly. IOGEAR® Service Support can be reached by phone from 8am to 5pm Pacific Standard Time, Monday through Friday or at the following address: Toll Free 866-9-IOGEAR (USA & Canada) Phone: 949-453-8782 23 Hubble Irvine, CA 92618 You may also reach us online at www.iogear.com/support 24 hours a day. Please be ready to give a brief description of the problem, and what you were doing whe

  • IOGear GHPB01, Networking Basics For a computer to access a Network Printer, the device driver or software for that printer must be installed and pointed to the proper location of the printer. This is done similarly to the way you installed the printer on the computer it is connected to. 1. Go to a computer that is not connected to the printer and select "Start" from the Task Bar "Control Panel" then "Printers and other Hardware". 53

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ASROCK G41M-VS2 Operation & user’s manual asrock/g41m-vs2-358.pdf 14 Feb 2023 50 0.92 Mb
2 Maytag MHWZ400TB - Epic Series 3.7 cu. Ft. Front-Load Washer Use and care manual maytag/mhwz400tb-epic-series-3-7-cu-ft-front-load-washer-9R8.pdf 20 Dec 2022 64
3 i-Lan KP-97BT Operation & user’s manual i-lan/kp-97bt-4SR.pdf 10 Apr 2023 20
4 Saturn 2004 L-Series Owner's manual saturn/2004-l-series-H44.pdf 01 Oct 2023 386
5 Phoenix Gold RSd1200.1 Owner's manual phoenix-gold/rsd1200-1-46L.pdf 12 Dec 2022 8
6 MicroFridge MHR-3W Operation & user’s manual haier/mhr-3w-O54.pdf 23 Aug 2023 20

Similar Resources:

  • Edimax

    EW-7206APg

    (10 pages)
    WWiirreelleessss AAcccceessss PPooiinntt EW-7206APg / EW-7206PDg / EW-7209APg QQuuiicckk IInnssttaallllaattiioonn GGuuiiddee ((QQ..II..GG..)) Version 2.0 / October 2006 …
  • Devolo

    dsl+1100

    (3 pages)
    dsl+ 1100 WLAN ADSL2+ Modem & WLAN-Router + WLAN-USB-Stick devolo AG Sonnenweg 11 • 52070 Aachen • Tel: +49 (0)241-182 79 0 • Fax: +49 (0)241-182 79 99 • www.devolo.de • [email protected] Stand: 20.05.08 Technical specifications LAN standards Ethernet specification IEEE 802.3 Fast Ethernet specification IEE 802.3u Fullduplex specificat …
  • Grizzly

    H7790

    (24 pages)
    COPYRIGHT © NOVEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.#EW7626 PRINTED IN CHINAMODEL H7790/H7791Laminate Trim RouterOWNER'S MANUAL …
  • IOGear

    GFR309

    (10 pages)
    Lecteur de cartes multiples USB 3.0 Guide de démarrage rapidewww.iogear.comUSB 3.0 Varias Tarjetas lector / EscritorGuía de configuración rápideGFR309PART NO. Q1295USB 3.0 Multi-Card Reader / WriterQuick Start Guide …
  • Asante

    GX5

    (9 pages)
    FriendlyNET® GX5 Gigabit Ethernet Switches New! The FriendlyNET GX5 family includes the smart GX5-2400W (top) and GX5-424W (bottom) PRODUCT LINE GUIDE “Most of the news in LAN product introductions these days is coming from smaller companies, rather than the big names. Whatever the case, it seems like there have been mor …
  • TeleWell

    TW-EAV510 AC v2

    (5 pages)
    TW-EAV510 Wireless Bridge (WDS) Configuration Guide Step: 1. Device 1 and Device 2’s LAN IP address must be different and can be in the same subnet. Device 1 with DHCP Server enabled Advanced Setup -> LAN -> LAN Setting …

Comments, Questions and Opinions: