IOGear GUWIP204 Installation Manual

Text of IOGear GUWIP204 User Guide:

• IOGear GUWIP204, ©2011 IOGEAR ® . All Rights Reserved. PKG-M1172-a IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without noti

• IOGear GUWIP204, 18 19 Select your wireless network and click the 2. “Set” button. Next choose the security system and enter key 3. which are suitable fo your AP wireless setting. Once that is complete, scroll to the bottom of the page and click “submit” to complete the wirelessconguration.

• IOGear GUWIP204, 22 23 Maintenance Clicking on the “Maintenance” tabontheCongurationpage will take you the the maintenance section where you can reset the device, restore to factory settings, orupgradethermware.Referto page35fordetailsonrmware upgrade.Forthelatestrmware versions, be sure to check the IOGEAR website at http://www.iogear.com.

• IOGear GUWIP204, 20 21 Administrator Conguration By clicking the “Administrator” tabontheConguration page, you can change the administrator user name and password. You can also add users or remove users.

• IOGear GUWIP204, 26 27 The other user can either “Accept” or “Reject” your request. If they “Accept”, then they will automatically disconnect from the device and you will automatically be connected. If they “Reject” your request, no changes will be made. They will remain connected to the device.

• IOGear GUWIP204, 26 27 Disconnecting a USB device OnceyouarenishedusingtheUSBdevice,opentheUSBShareStationUtility.Clickonthe device you wish to disconnect and click on the “Disconnect” icon. Once disconnected, any of the other users on the network can connect to the device.

• Table of Contents Package Contents 4 System Requirements 5 Product Overview 6 Hardware Installation 7 Windows Software Installation 10 Mac Software Installation 11 Conguration 14 General Settings 17 WirelessConguration-WEP 18 WirelessConguration-WPA/WPA2 20 AdministratorConguration 21 Maintenance 23 Conne

• IOGear GUWIP204, 36 37 Enter the Administrator Username 4. (default: admin) and Password (default: admin) to login. Click on the “Maintenance” tab at the top. 5. Next click on “Download New Firmware”. This will take you to the IOGEAR website. Here you can check to see if there is an upgradedrmwareavailable.Ifthereis, downloaditandmakenoteoftheles saved location. Once you have downloaded the latest 6. rmware,clickonthe“FirmwareUpgrade” button.

• IOGear GUWIP204, 11 Mac Software Installation Please insert the driver CD into your Mac. The 1. CD should mount and you can view the CD contents in Finder. Click on the Mac folder. Nextdoubleclickontheinstaller.dmgle.This2. will mount the installation Utility.

• IOGear GUWIP204, 38 39 Troubleshooting LED Indicators Indicators Behavior Description Power On Power on Off Power off/System error Link On Network connected Off No physical connection to network Status Blinking Activity on network Off No activity on network USB On USB device connected Blinking Connected USB device error Off No physical connection to USB device

• IOGear GUWIP204, 14 15 Conguration RuntheIOGEARWireless4-PortUSB1. Sharing Station Control Center. It will automaticallysearchtheGUWIP204and display the status. SelecttheGUWIP204thatyouwantto2. congure.Nextclickonthe“Congure Server” icon.

• 28 29 Next,clickonthe“Auto-ConnectPrinter”2. iconandselect“SetAuto-Connect Printer. Next, an “Installed Printer List” box 3. will list the installed printers on your computer. Check the box next to the printeryouwishtoenableauto-connect and click “Apply”.

• 4 5 System Requirements Computer: CPU of 1.7GHz and above • Minimum512MBRAM• Windows XP/Vista /7• Mac OSX 10.6 and up• Availablewirelessrouterinhome/ofcenetwork • Supported Devices: PrinterorMulti-functionprinterwithUSBconnection*• External USB hard drive • USBwebcam*• USB�

• IOGear GUWIP204, 30 31 Theprintershouldnowshow[Auto-4. Connected Printer]. If you send a print job you will notice the utility will automatically connect to the printer then disconnect. Note: The utility must be running in the backgroundinorderfortheAuto-Connect tofunction.Theutilityisconguredtostart when window starts by default

• IOGear GUWIP204, 34 35 Once the scan is complete, the 4. “WelcometotheAuto-Connect Scanner” window will appear. You should see a copy of your scan on the right. Your scan is now complete. Click the “Close” button at the bottom to close the window.

• IOGear GUWIP204, 40 41 Factory Default RuntheIOGEAR4-PortWirelessUSBSharingStationControlCenter.1. Select the server that you want to reset to factory default settings. Next click on the 2. “CongureServer”icon.

• IOGear GUWIP204, 34 35 Firmware Upgrade RuntheIOGEAR4-PortWirelessUSB1. Sharing Station Control Center. Select the server that you want to 2. upgradethermwareon.Nextclickon the“CongureServer”icon. Thiswillbringupthecongurationpagein3. yourwebbrowser.Click“Cong”

• IOGear GUWIP204, 46 47 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications. Although this product complies with the limits for a Class B digital device, there

• IOGear GUWIP204, 8 9 ConnectthepoweradaptertotheGUWIP204andturnitonusingtheon/offswitch.TheUSBconnectionLEDwill3. turn on indicating that unit is correctly connected to the network. Turn on your USB device.

• 6 7 NOTE: Before you connect your USB device to the GUWIP204, please refer to the user manual and install the driver on your computer rst, for example the driver for your printer. When the installation is completed, safely disconnect your USB devices from your computer. Disconnect the power source from USB devices. Connect your USB device to any one of the USB ports on the USB Sharing S

• IOGear GUWIP204, 24 25 Connect to an attached USB device OpentheUSBShareStationUtility.YoushouldseeGUWIP204aswellastheattachedUSB devices. Make sure the drivers for these are already installed on your computer for before connectingtothemthroughtheGUWIP204. Click on the device you wish to connect 1. to, then click on the “Connect” icon. Clicking on the “Connect” icon simulates anactualUSBdeviceplug-in. Now you can use the device as if it were 2. connected directly to your PC’s USB Port. Once connected you will see “Manually Connected By Your Computer’s Name”. NOTE: Only 1 PC is allowed to connect t

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• Elan HC8 (2 pages) HC8Quick Install GuideRev. C - 3/10/11P/N 9901085DO NOT connect the AC power cord until all other connections have been completed.Unpack the HC8. Verify that you have all package contents. You should have received:  HC8  DB9 Male to RJ45 Adapter (8)  Can Mount Brackets (2)  AC Power cord  Safety Sheet  Mounting Scre …

• Planet WGSW-24040 (308 pages) User’s Manual of WGSW-24040 / WGSW-24040R SGSW-24040 / SGSW-24040R 1 User’s Manual WGSW-24040 / WGSW-24040R 24-Port 10/100/1000Mbps Layer 2 Managed Switch SGSW-24040 / SGSW-24040R 24-Port 10/100/1000Mbps Layer 2 Managed Stackable Switch …

• H3C S9500 Series (13 pages) Operation Manual – PoE H3C S9500 Series Routing Switches Table of Contents i Table of Contents Chapter 1 PoE Configuration ....................................................................................................... 1-1 1.1 PoE Overview ............................................................................................................. …

• EuroLite DMX Scene Setter 24/48 (28 pages) © Copyright Nachdruck verboten! Reproduction prohibited! Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! BEDIENUNGSANLEITUNG USER MANUAL DMX SCENE SETTER 24/48 48-CHANNEL DMX CONTROLLER …

• Metretek MTEK6000 (81 pages) MTEK6000 SERIES USER'S MANUAL January 2002 MTEK6000 SERIES Electronic Flow Corrector & Monitoring Devices Installation and Operating Instructions January 2002 Part # 900315 …

• AVM Init7 Fritz!box 5490 (4 pages) Init7 (Schweiz) AGTechnoparkstrasse 5CH-8406 [email protected] +41 44 315 44 00 Fragen? Questions? Questions?https://www.init7.net/de/support/faq/https://www.init7.net/en/support/faq/https://www.init7.net/fr/support/faq/ FRITZ!box 5490. Anleitung. Manual. Instruction. Netzteil. Power supply. Bloc d’alimentation. Ethernetkabel. …

Comments, Questions and Opinions: