Manualios.com

IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U Operation & User’s Manual

  • Wireless USB Print Server GPSR01U GPSR01U GPSR01U Server
  • maWOFFsZiqhWc
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 80

IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U Manual Online:

4.8, 2041 votes
IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U User Manual
IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U User Guide
IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U Online Manual

Text of IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U User Guide:

  • 33 Macintosh Installation 16. Once you select Setup, you will now see the configuration menus as you scroll down. 17. The first section is for the Print Server Status. Device Name – Here you can name your print server. It must be a single name with no spaces. System Contact – You may leave this blank. This is for administrative purposes and generally holds the e-mail address of the networ

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Note: For some specific printers you may need to connect the pritner to the computer and install the driver first and then connect it to the print server. 10 Installation Software installation 1. Insert the CD on any Windows 98/ME/2000/XP computer and the Setup Wizard will start. Select Driver Installation. Select the Wireless Setup Wizard. The Wireless Setup Wizard will install PS Admin, a utility used to configure the Wireless Print Server. 2.

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Once you select the Load Default button, a window will appear. The window will ask you if you want to restore factory default settings. Click OK to restore the settings. Once you click OK and the settings have been successfully restored, a new window will appear. Please wait for the print server to restart. Once it restarts, it will bring you back to the homepage. Reset The reset button resets the wireless print server. Web Based Configuration 69

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Installation Before you start, you should prepare: • One Windows ® 98/Me/2000/XP PC with CD-ROM • One 802.11b Access point and Wireless Adapter • One USB printer • Network Protocol TCP/IP must be installed Hardware Installation 1. Turn the power off to the printer. 2. Connect the printer to the Print Server. 3. Plug the AC power module into the wall socket. The Print Server will be switched on once you plug it in. 4. Turn the power on to your printer. 9

  • • Easily connect your USB printer to a wireless network • Allows multiple computers to share one USB printer on the wireless network • Print from any computer on your network or from across the Internet • Supports DHCP Client and multiple network protocols • Works with 802.11b or 802.11g wireless networks • Data transfer rate up to 11Mbps • Up to 150 ft wire

  • 25. During this time, you may change your Network Settings back to what you had them set to before. Ex. If you were using DHCP before, you will select it from the Configure menu, and then click Apply Now. 26. You may now close the Network Preferences. 27. Move the switch on the top of your Wireless Print Server from Ad Hoc to Standard-mode. 28. In System Preferences, select Printers (or

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, 27 Macintosh Installation IOGEAR Wireless Print Server Installation in Mac OSX 1. Open the box the Wireless Print Server came in. Follow the proper included instructions for hooking it up to your Printer. 2. After the print server has been plugged in, move the switch on top of the Wireless Print Server to enable Ad Hoc mode. Flip the DIP switch to the right side, the side near to the power connector. 3. Wait a few moments, after enabling Ad Hoc mode, then select the Airport status icon on the right side of the menu bar.

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Web Based Configuration Device Name: This option allows you to input device name of the print server. To correct the print server’s device name. System Contact: This option allows you to input contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to type the location of the print server. Password: This option allows you to change the password to the print servers web interface. Re-type Password. Re-type the password. Wireless Setup This section allows you to conf

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Radio & TV Interference Statement WARNING!!! This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, 6. After it goes back to the “Wireless Network Connection Properties.” Click the Add button. 7. On the Network name (SSID) enter “WLAN-PS”. Uncheck other boxes. Press the OK button. Changing SSID on Print Server 44

  • Take note of the name that is shown for your wireless router. In the example below is “linksys”, we are going to need that information later. Click on the “Advance” button. 4. 5. Choose “Computer-to-computer (ad-hoc) networks only.” Then select the Close button. Changing SSID on Print Server 43

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Changing SSID on Print Server 48 14. Turn the printer server off by unplugging it Change the mode from AD_HOC on the Printer Server Hardware, by flipping the DIP switch to the left-side, the side far from power connector. Turn the printer server on by plugging it back. Return the wireless connection to the normal status (Any available Network). Right-click on My Network Places and choose properties. 15. Right-click on the wireless Network Connection and choose Properties. Select the Wireless Networks tab.

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, 15. The Wireless Print Server’s web-interface will appear. Click on Setup. 32 Macintosh Installation 14. After you click Apply Now, simply open Safari (or Internet Explorer) and type in the following web address: 192.168.5.1

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, NetWare Setup This section allows you to configure the NetWare settings of the wireless print server. Web Based Configuration Print Server Name: This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues. Encrypted Password: This option allows you to input encrypted password from the print server. The print server login to NetWare server that administrator set password from selected print server. NDS Mode: To Enable NDS Mode, if you want to setup NDS environment. To select Tree Name of NetWare then input context name in the Contex

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Basic Wireless Settings - In this window you can change the Communication Type, SSID and Data Transmission rates. Change the SSID to match your wireless network SSID. 7. Unless you are concerned about unauthorized access to the print server, or if your network utilizes web encryption, leave the Enable Web Encryption box un-checked and click Next. 8. 13 Installation

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. Subnet Mask: This option allows you to view subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment. Web Based Configuration Gateway’s IP: This option allows you to view gateway from the print server.

  • 30. Click Add. 31. In the top pull down box, select IP Printing. NOTE: You can select AppleTalk as well. It will not require you to enter an IP address and will install the same. Printer Type – Leave as LPD/LPR Printer Address – This is where you will type in the IP address you entered in the Wireless Print Server setup (ex. 192.168.1.254) 39 Macintosh Installation 29. Under t

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Product Overview External print servers enhance capability by letting you place your printers, plotters, or equality printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Network Management The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a warning. A standard SNMP agent is permanent on these print servers. Any standard SNMP-based application can be used to access and manage these print servers. Network configuration The print servers provide an embedded web server that can be access

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Thank you for purchasing one of the most feature-rich wireless print servers on the market. IOGEAR ® ’s Wireless USB Print Server’s are first rate connectivity accessories designed to help reduce the frustration of dealing with cables in your home or office. IOGEAR ® ’s palm sized single-port Wireless USB Print Server allows any networked computer to wirelessly share a USB printer. We hope you enjoy using your IOGEAR ® Wireless USB Print Server, another connectivity solution from IOGEAR ® . ©2004 IOGEAR. All Rights Reserved. PKG-M0083 IOGEAR ® , the IOGEAR ® logo, MiniView, VSE are tradema

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Web Based Configuration SNMP Setup This section allows you to configure the SNMP settings of the print server. Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. AppleTalk Setup

  • IOGear Wireless USB Print Server GPSR01U GPSR01U GPSR01U, Changing SSID on Print Server 51 20. Select Finish. Go back to the initial screen and choose Network Print Server Setup wizard. 21. The following screen will show you the Print server after it searches for it.

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Thiel SI 1 Operation & user’s manual thiel/si-1-KW5.pdf 15 Mar 2024 16 0.4 Mb
2 Omron ER1022 Datasheet omron/er1022-46Q.pdf 15 Jul 2022 4
3 Printronix L5535 Maintenance manual printronix/l5535-51H.pdf 10 Jun 2023 358
4 Olympus f2.8-3.5 Brochure & specs olympus/f2-8-3-5-U87.pdf 01 Oct 2022 2
5 Philips QC5570/40 Quick start manual philips/qc5570-40-2K8.pdf 26 May 2023 4 0.65 Mb
6 Argos AVR 4 Seater Patio Set Assembly instructions argos/avr-4-seater-patio-set-9K7.pdf 17 Jul 2023 5

Similar Resources:

  • Atop

    SW550 Series

    (2 pages)
    Industrial Wireless Serial Device ServerHardware Installation GuideVersion 1.0Updated on June, 2012Techn olo gie sTel: 886-3-5508137Fax: 886-3-5508131www.atop.com.twP/N: 89900409GSW550X SeriesAtop Technologies, Inc.Installation OverviewField Maintenance and ServiceThe device’s appearance is as in the figure below.There are mounting plates and screws that …
  • Xerox

    Phaser 790/N

    (18 pages)
    0DMHVWL.5HJDODocument # 100405Xerox MajestiK 5760 / 5765 and Xerox Regal 5790 Digital ColorCopier PANTONE ColorThis information also applies to the Regal 5790.The Xerox MajestiK 5760 / 5765 Digital Color Copier has beenlicensed by Pantone, Inc. to print PANTONE Color simulations.This means that Pantone, Inc. and Xerox Corporation haveworked together …
  • Dell

    PowerEdge C6105

    (62 pages)
    Dell PowerEdge C6105Getting StartedWith Your System Guide de mise en route Primeiros passos com o sistema Procedimientos iniciales con el sistema …
  • Nortel

    Meridian 1 Option 11C

    (102 pages)
    Meridian 1Option 11C1.5 Mb DTI/PRIDocument Number: 553-3011-310Document Release: Standard 13.00Date: January 2002Year Publish FCC TMCopyright © 1992–2002 Nortel NetworksAll Rights ReservedPrintedinCanadaInformation is subject to change without notice. Nortel Networks reserves the right to make changes in designor components as progress in engineering and …
  • AMX

    MAX-IMS Series

    (2 pages)
    Installation GuideMAX-IMS Integrated Music ServerMAX-IMS Integrated Music ServerThe MAX-IMS Integrated Music Server (FIG. 1) stores and manages your entire CD collection. Audio is stored at the highest standard of sound possible through native CD quality. The MAX-IMS preserves the depth and dynamics of the original media by only recording true CD-quality fil …
  • Samsung

    ML-2010 - B/W Laser Printer

    (25 pages)
    //////////////////////////////////////////////////////////////////JPEG License* This software is based in part on the work of the Independent JPEG Group/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////zlib/png License* This product uses software program which is distributed u …

Comments, Questions and Opinions: