Manualios.com

IOGear GCS632U Installation Manual

IOGear GCS632U Manual Online:

4.45, 2163 votes
IOGear GCS632U User Manual
IOGear GCS632U User Guide
IOGear GCS632U Online Manual

Text of IOGear GCS632U User Guide:

  • IOGear GCS632U, Package Contents Overview Features Requirements Introduction Installation Operation Hotkey Operation Advanced Hotkey Operations Appendix Specification Tech Support Radio & TV Interference Statement Limited Warranty 02 03 05 06 07 08 10 10 19 25 26 27 28 29 Table of Contents

  • IOGear GCS632U, This package contains: 1 MiniView™ Micro USB PLUS 2 Port KVM Switch (cables built-in) 1 User Manual 1 Quick Start Guide 1 Warranty Registration Card If any items are damaged or missing, please contact your dealer. Package Contents 2

  • IOGear GCS632U, Operation 22 After completing a setting, you automatically exit Hotkey Mode. Using a PC keyboard to emulate a Sun Keyboard After you set up the appropriate Keyboard Platform (refer to Page16), you will be able to use a PC (101/104) key keyboard to emulate the functions of the Sun keyboard when the Control key [Ctrl] is used in conjunction with other keys. The corresponding functions are shown in the table to the right. NOTE: When using [Ctrl] combinations, press and release the [Ctrl] key, then press and release the activation key.

  • IOGear GCS632U, 17 Alternate Port Switching Keys The port switching keys can be changed from tapping Scroll Lock key twice, to tapping Ctrl key twice. If you have a MAC keyboard (or a keyboard that does not have Scroll Lock key), change the port switching keys by doing the following: 1 . Invoke Hotkey Mode (See Page 11- 13) 2. Press and release T The port switching key will now be the Ctrl key. To switch between computers, simply tap the Ctrl key twice: [Ctrl], [Ctrl] NOTE: This procedure is a toggle between the two methods. To revert back to the original port switching keys, repeat the above procedure.

  • IOGear GCS632U, 18 Restore Defaults To restore the GCS632U to its factory default settings, do the following: 1. Invoke Hotkey Mode (See Page 11-13) 2. Press and release [R] key. 3. Press [Enter] The GCS632U’s factory default settings are as follows: Operation

  • IOGear GCS632U, Using a PC keyboard to emulate a Mac Keyboard After you set up the appropriate Keyboard Platform (refer to Page16), you will be able to use a PC (101/104) key keyboard to emulate the functions of the Mac keyboard. The corresponding functions are shown in the table to the right. NOTE: When using key combinations, press and release the first key [Ctrl] or [Alt]), then press and release the activation key. Operation 23

  • Operation 19 Multi Platform (Mac, Sun, Win) and Multi Language Setup The default port settings are for a Windows Compatible operating platform, and US English keyboard language code (Refer to the previous section). Some multi platform operations require you to change the Keyboard platform in order to fully support all the functions under that particular platform. Once the ap

  • IOGear GCS632U, 34 Operation 10 Hotkey Operation The hotkey operations of the KVM assume the use of a PC-Compatible keyboard with the Scroll Lock key. If you are using a MAC Keyboard (or a keyboard that does not have Scroll Lock key), refer to the section in the manual “ Alternate Port Switching Keys ” for information on re-configuring the KVM’s hotkeys, and page 13 for Mac keyboard operation. PC keyboard Scroll Lock

  • IOGear GCS632U, Features • Use one USB keyboard, monitor and USB mouse to control two USB computers. • 6' long molded-in cables to simplify setup. • Share your multimedia speakers among the two connected computers. • Full support for Mac and Sun systems. • Supports special keys on Mac and Sun keyboards. • Port selection through convenient Hot Keys. • USB sniffing technology allows complete USB mouse and keyboard emulation for error-free boot-up. • Plug-n-Play monitor support. • Support video resolutions up to 2048 x 1536 • No software required. • Built

  • IOGear GCS632U, the Mac or Sun keyboard as the console keyboard, or with a standard PC key- board. When use a PC keyboard, a special set of hot keys are designated to emulate the Mac and Sun special keys. With KVM cables (6' long) molded into the unit, all you need to do is to plug it into your computers, and you’ve got a complete KVM solution from IOGEAR ® . Overview 4

  • IOGear GCS632U, Operation 12 The KVM will now enter Hotkey mode, and the Caps Lock and Scroll Lock LEDs flash in succession to indicate this. On PC-Compatible keyboards this LED is usually located on top right-hand corner. If the KVM did not enter Hotkey mode, repeat the above procedure keeping in mind that this procedure must be done quickly and in the time-frame indicated. PC keyboard Num Lock Minus

  • IOGear GCS632U, Operation 11 Port Switching To toggle between the two computers, quickly tap the Scroll Lock key twice: [Scroll Lock], [Scroll Lock] NOTE: You can change this hotkey to [ctrl] [ctrl], see page 17 for details. Hotkey Setting Mode (HSM) For all Hotkey operations, you must use the number keypad on the right side of your keyboard To Invoke Hotkey Mode (PC-Compatible Keyboard): 1. Press and hold Num Lock key for two seconds 2. Press and hold Minus key [ – ] for one second 3. Release Minus key [ – ] and within one second also release Num Lock key

  • IOGear GCS632U, IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMEN- TATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the righ

  • IOGear GCS632U, Operation 20 Operation Using a PC keyboard to control a Window based PC Using a Mac keyboard to control a Mac Using a Sun keyboard to control a Solaris based Sun Using a PC keyboard to control a Mac Using a PC keyboard to control a Solaris based Sun Keyboard Platform Auto Auto Auto Mac Sun

  • IOGear GCS632U, Step. 2 Installation 9 Plug the USB, video, and speaker connectors of the attached KVM cables into their respective ports on the computers you are installing. NOTE: The computer attached to the cable with one dot at its base is the Port 1 computer; the computer attached to the cable with two dots at its base is the Port 2 computer (see p. 10 for hotkey port selection). Repeat the above step for your second computer. Turn on the power to the computers and refer to Operations Instructions. 3. 4. 5. NOTE: The GCS632U’s Power On default is to link to the first computer you turn on.

  • IOGear GCS632U, Operation To Invoke Hotkey Mode (MAC Keyboard): 1. Press and hold Clear key for two seconds 2. Press and hold Minus key [ – ] key for one second 3. Release Minus key [ – ] and within one second also release Clear key The KVM will now enter Hotkey mode; indicated by blinking of the Caps Locks LED. On some MAC keyboards, this LED is on the Caps Lock key itself. If the KVM did not enter Hotkey mode, repeat the above procedure keeping in mind that this procedure must be done quickly and in the time

  • IOGear GCS632U, Appendix LED Display Table 25 Activity Off On (Steady) Flashing (On and Off Equal) Indication Port is not selected Port is connected to an active computer Port is connected to an active computer and is being accessed in Auto Scan Mode

  • Before you begin, make sure that the power to all the devices you will be connecting up have been turned off. NOTE: To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded. Plug your keyboard, monitor, mouse, into their respective ports on the GCS632U. The keyboard and mouse ports

  • IOGear GCS632U, NOTE: If using the Num Lock and Minus key to invoke Hotkey function is not optimal, refer to the next page for instructions on changing the hotkey invocation keys. When Hotkey Mode is active, ordinary keyboard and mouse functions are suspended – only Hotkey compliant keystrokes can be input. At the conclusion of some hotkey operations, you automatically exit Hotkey mode. With some operations, you must exit manually by pressing the Esc or Spacebar on your keyboard. Switching Ports You may also s

  • Operation 24 List Hotkey Settings To see a list of the current hotkey settings, do the following: 1. Open a text editor (such as Notepad, Textedit, or Word) 2. Invoke Hotkey Mode (See Page 11-13) 3. Press F4 to ‘paste’ the KVM configuration on your text editor USB Reset If the USB loses focus and needs to be reset, do the following: 1. Invoke Hotkey Mode (See P

Related Products and Documents (Storage):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Saab 2007 9-7X Owner's manual saab/2007-9-7x-U4V.pdf 06 Dec 2023 498 2.93 Mb
2 Sony UWP-C1 Specification sheet sony/uwp-c1-1I1.pdf 10 Feb 2024 12 1.67 Mb
3 Thermos 461262508 Product manual thermos/461262508-7P3.pdf 09 May 2023 28 5.73 Mb
4 Sony CLIE PEG-N610C Operation & user’s manual sony/clie-peg-n610c-187.pdf 26 Nov 2023 60 1.15 Mb
5 BESAFE IZI COMBI - CAR LIST 10-2009 Manual  besafe/izi-combi-car-list-10-2009-32D.pdf 29 Jun 2022 7 0.22 Mb
6 Oki B730dn Operation & user’s manual oki/b730dn-PA7.pdf 15 Jan 2024 51

Similar Resources:

  • Fortinet

    FortiLog-100

    (2 pages)
    AC Adapterfor FortiLog-100Null-Modem Cable(RS-232)for FortiLog-800Ethernet Cables:Orange - CrossoverGrey - Straight-throughResetSwitchLCDPanel1Setting SwitchesA and BPowerConnectionPowerSwitchLANFrontBackFront4BackLAN1(Network Connection)ResetSwitchATXRedundantPowerSuppliesPowerConnectionPowerSwitchLCDPanelSettingSwitchesA and BLED indicators:Power, Error, N …
  • AMX

    HDDs in MMS Servers

    (2 pages)
    Installation GuideReplacing HDDs in MMS ServersOverviewThe AMX line of MAX-MMS servers support hot-swappable hard disk drives (HDDs), accessible behind the removable faceplate, on the front panel. Typically a new HDD will be required only if an existing one has failed. Only HDDs provided by AMX can be used as replacements in MMS servers, and in order to repl …
  • Samsung

    SH-R522C

    (24 pages)
    Samsung's OMS (Optical Media Solution) Customer Support Website (Http://samsung.com)offers the latest versions of firmware for ODD products, user instructions and product information. Select Model SH-R522C(TS-H292C)SH-R522C (TS-H292C) …
  • Compaq

    ProLiant ML350 (G2)

    (47 pages)
    Overview Standard Features Models Options Memory Storage Power Specifications TechSpecsQuickSpecsCompaq ProLiant ML350 Generation 2 (G2) QuickSpecsCompaq ProLiant ML350 Generation 2DA - 10960 Worldwide QuickSpecs — Version 39 — 2.13.2003Page 1 …
  • Whirlpool

    GLADIATOR GAWG28KDYG

    (20 pages)
    STEEL WALL GEARBOX CABINETAssembly InstructionsARMARIO DE PARED DE ACERO PARA HERRAMIENTASInstrucciones de ensamblajeARMOIRE À OUTILS MURALE EN ACIERInstructions d’assemblageTABLE OF CONTENTS/ÍNDICE/TABLE DES MATIÈRESCABINET/LOCKER SAFETY........................2PARTS............................................................2ASSEMBLY INSTRUCTIONS..... …
  • Ameriwood HOME

    8480013COM

    (17 pages)
    B348480013COM00GO- Unit can tip over causing severe injury or death.- Anchor unit to stud in wall (if instructed to).- Do Not allow children to climb on unit.- Put heavy items on lower shelves or drawers.WARNINGTHIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.Do Not Return This Product!Contact our cu …

Comments, Questions and Opinions: