Manualios.com

TAG MIL-BOOK 100 Series Operator's Manual

TAG MIL-BOOK 100 Series Manual Online:

4.65, 2883 votes
TAG MIL-BOOK 100 Series User Manual
TAG MIL-BOOK 100 Series User Guide
TAG MIL-BOOK 100 Series Online Manual

Text of TAG MIL-BOOK 100 Series User Guide:

  • TAG MIL-BOOK 100 Series, Specifications A-2 Parts Specifications On computer RJ-11 fax/modem port, serial ports, VGA, Mic-in, Line-out, RJ-45 port, USB port, I/O ports Docking station (option) USB ports, serial ports, VGA, ECP/EPP parallel port, Mic-in/ Line- out Modem 56 KBPS internal fax modem LAN Fast Ethernet, 10/100 MBPS auto-negotiation AC adapter 100∼240 V AC, 50∼60 Hz auto-switching Car adapter 12~32 V DC Power Battery Li-ion battery, 9 cells Dimension (W×D×H) 10.87×9.41×1.69 inch (276×239×43 mm) – for computer 10.87×9.41×1.02 inch (276×239×26 mm) – for docking station (opt

  • Troubleshooting 8-11 WARNING: COM3 is reserved for use by the touchscreen, do not disable it. If COM1/2 is disabled and COM3/4 is enabled on the SCU Setup (refer to chapter 5), upon booting system would recognize the enabled COM3/4 and designate it as COM1/2. The following table is the default settings: COM Port I/O (input/output) Port IRQ (Interrupt Request) COM1 (

  • TAG MIL-BOOK 100 Series, v Battery Problems .............................................................8-4 CD/COMBO Drive Problems (on optional docking station)8-5 Display Problems.............................................................8-5 Floppy Disk Drive Problems (on optional docking station)8-7 Hardware Device Problems..............................................8-8 Hard Disk Drive Problems...............................................8-8 Keyboard, Mouse, and Touchpad Problems .....................8-9 LAN/Wireless

  • TAG MIL-BOOK 100 Series, Expanding Your Computer 4-1 CHAPTER 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor Parallel device (through the optional docking station) Serial device USB device PC Card

  • TAG MIL-BOOK 100 Series, Getting Started 1-16 Ref Component Description See Also Œ Serial Ports Connect serial devices such as mouse, etc. • Parallel Port Connects a parallel device such as printer. Ž VGA Port Connects an external monitor. • USB Port Connects a USB device, such as printer, digital camera, joystick and more. • Power Connector Connects the AC adapter. Front Components Ref Component Description See Also Œ Hooks Allows you to hook the computer to the docking station. • Floppy Disk Drive Accepts a flop

  • TAG MIL-BOOK 100 Series, Setup Configuration Utility 5-9 Security Menu The Security menu contains the security setting that safeguards your system against unauthorized use. Set Password allows you to set the password for your system. When typing password, first make usre that Num Lock is off, then type your password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable Password to Power-on sub-item is enabled, the set password is always required to boot the computer. Hard Disk Boot Sector sets if a warning message will appear when the hard disk boot sector (partition table) has been changed. A check mark (ü

  • Getting Started 1-19 Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose … Do this … To know more about the computer … Go on to the next chapter. To install the operating system if your dealer has not already done so … See the operating system manual. To know more about the operating system … Read the operati

  • TAG MIL-BOOK 100 Series, i Table of Contents Preface ..................................................................................v Chapter 1 Getting Started .....................................................1-1 Getting the Computer Running..............................................1-2 Unpacking.......................................................................1-2 Connecting to AC Power .................................................1-2 Opening the Cover...........................................................1-3 Closing the Cover..........

  • TAG MIL-BOOK 100 Series, Expanding Your Computer 4-7 To remove a PC Card: 1. Your operating system may require you to stop the PC Card before you actually remove it. (In Windows, double-click the PC Card icon in Control Panel to stop the card.) 2. Push the eject button and the card will slide out slightly. 3. Pull the card out of the slot.

  • TAG MIL-BOOK 100 Series, Operating Your Computer 2-13 Inserting and Ejecting Floppy Disks To insert a floppy disk, hold it with the arrow facing up and towards the drive. Slide the disk into the drive until it clicks into place. To eject a floppy disk, first ensure that the floppy disk drive in-use indicator is off, and then press the eject button on the drive. When the floppy disk pops out of the drive, remove the floppy disk and store it properly. CAUTION: l Never turn off or reset the computer while the floppy disk drive in-use indicator is on. l Always store your floppy disks in a safe, clean container, to protect them from the environment and magnetic f

  • TAG MIL-BOOK 100 Series, Setup Configuration Utility 5-3 The menu can be divided into four areas: l On the top line is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. l The center left column of the menu contains items that you can set for the selected menu title. l The right column of the menu provides help information of the selected item. l The bottom lines give keyboard instructions for moving around and making selections.

  • iv Chapter 5 SCU (Setup Configuration Utility) .......................5-1 When and How to Use the SCU Program ..............................5-2 When to Use....................................................................5-2 Starting SCU....................................................................5-2 Moving Around and Making Selections .................

  • TAG MIL-BOOK 100 Series, Operating Your Computer2-20 Using the Audio Features NOTE: l To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. l If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: l Digital audio and analog mixing functions required for recording and playing sound on your computer l SoundBlaster Pro, Adlib, and Microsoft Windows Sound System support l Speaker (lo

  • TAG MIL-BOOK 100 Series, Getting Started 1-12 LAN 10/100 Indicator – glows orange when LAN speed is 10 MBPS – glows green when LAN speed is 100 MBPS Hard Disk Drive Indicator (includes Floppy Disk Drive or CD-ROM Drive In-use Indicator when computer is connected to docking station) Ž Keyboard Serves as the data input device of the computer. • Touchpad Serves as the pointing device of the computer. • Power Button Turns the computer power ON and OFF.

  • TAG MIL-BOOK 100 Series, Operating Your Computer2-8 Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad and two buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display

  • TAG MIL-BOOK 100 Series, Troubleshooting 8-3 Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery problems P. 8-4 CD/COMBO drive problems (on optional docking station) P. 8-5 Display problems P. 8-5 Floppy disk drive problems (on optional docking station) P. 8-7 Hardware device problems P. 8-8 Hard disk drive problems P. 8-8 Keyboard, mouse, and touchpad problems P. 8-9 LAN/Wireless LAN problems P. 8-10 Modem problems P. 8-10 PC Card problems P. 8-10 Power Management problems (for Windows) P. 8-11 Printer problems (connected to optional docking station) P. 8-12 Software problems P. 8-12 Sound problems P. 8-13 Startup prob

  • TAG MIL-BOOK 100 Series, Caring for the computer 7-3 Taking Care of the Computer Location Guidelines l Use the computer where the temperature is between 0 °C to 55 °C . l Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. l Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer. l Keep the computer at least 13 cm (5 inches) away from electri

  • TAG MIL-BOOK 100 Series, Troubleshooting 8-1 CHAPTER 8 Troubleshooting Hardware, software, or a combination of both can cause computer problems. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. It is divided into three sections: l Preliminary checklist l Solving common problems l Resetting the computer

  • TAG MIL-BOOK 100 Series, Operating Your Computer 2-3 To stop in this mode… Do this … To start up or resume again Suspend Depending on your settings in Windows, you can place the computer in Suspend mode by pressing the power button or by closing the display cover. Press the power button. If you choose to stop in Standby or Suspend mode, you can return to where you left off the next time you start up the computer. (See “Power Management” in Chapter 3 for more information.)

  • TAG MIL-BOOK 100 Series, Setup Configuration Utility 5-11 Exit Menu The Exit menu displays ways of exiting SCU. After finished with your setting, you must save and exit so that the new setting can take effect. Save Change and Exit saves the changes you have made and exits SCU. Discard Changes and Exit exits SCU without saving the changes you have made. Get Default Values loads factory default values for all the items. Load Previous Values loads CMOS values before running SCU.

  • TAG MIL-BOOK 100 Series, Getting Started 1-1 CHAPTER 1 Getting Started Congratulations on purchasing this industrial notebook computer. It’s rugged, compact, and portable design allows you to use it in the field or inside a vehicle and other demanding situations where conventional notebook computers just cannot measure up. It can also connect with a docking station to extend the capabilities of input/output devices. This chapter first tells you step by step how to get the computer up and running. You will find instructions for these procedures: l Unpacking l Connecting to AC power l Opening the cover l Connecting the computer to the docking station l Turning on the computer l Turning off the computer Th

  • TAG MIL-BOOK 100 Series, Getting Started 1-4 Closing the Cover When closing the cover, make sure that the hook is latched properly to safeguard against the following: To prevent damage to the LCD screen during transport. To prevent the computer from accidentally waking up from Suspend mode during transport without the user’s knowledge. Turning On and Off the Computer Turning On 1. Make sure the computer / docking station is connected to AC power. 2. Press the power button. 3. Each time the computer is turned o

Related Products and Documents (Laptop):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Weider Viper 2000 Manual  weider/viper-2000-JX7.pdf 11 Mar 2023 27 0.79 Mb
2 Sirius Satellite Radio Xpress RCi Operation & user’s manual sirius-satellite-radio/xpress-rci-FWJ.pdf 14 Feb 2023 143
3 MSI H110M PRO-VD Operation & user’s manual msi/h110m-pro-vd-T51.pdf 25 Feb 2023 148
4 KROM KHYBRID Installation quick manual krom/khybrid-667.pdf 04 Jul 2022 6
5 GARDECO Mexican Chimenea User instructions gardeco/mexican-chimenea-9Z3.pdf 02 Nov 2023 10
6 ATI Technologies Radeon X300 Series Operation & user’s manual ati-technologies/radeon-x300-series-831.pdf 07 Aug 2022 56 0.72 Mb

Similar Resources:

  • MSI

    S270

    (73 pages)
    General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Prefeace G52-N1013X1 …
  • Sony

    PCG-GRX670

    (194 pages)
    Welcome Congratulations on your purchase of this Sony VAIO® computer, and welcome to the online VAIO® Computer User Guide. This user guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions topreinstalled software programs. In the left navigation window, click the topics you want to learn more about, and t …
  • Dell

    XPS 13 Convertible

    (25 pages)
    XPS 13 ConvertibleSetup and SpecicationsComputer Model: XPS 9365Regulatory Model: P71GRegulatory Type: P71G001Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс» адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https:/ …
  • Dell

    Vostro Series

    (2 pages)
    1Connect the AC AdapterTilslut AC-adapterenDe netadapter aansluitenKytke verkkolaiteTilkople strømforsyningenAnslut nätadapternTilslut modemetDe modem aansluitenKytke modeemiTilkoble modemetAnslut modemetOpret forbindelse til netværketAansluiten op het netwerkKytkeydy verkkoonTilkople nettverketAnslut till nätverketTryk på tænd/sluk-knappenOp de aan/ui …
  • Dell

    Inspiron 3531

    (2 pages)
    2 Finish Windows setupTerminez l’installation de WindowsFinalizar configuración de Windows3 Explore resourcesExplorez les ressourcesExplorar recursosShortcut keysRaccourcis clavierTeclas de acceso directoSwitch to external displayBasculer vers un moniteur externeCambiar a la pantalla externaTurn off/on wirelessActiver/désactiver le sans filActivar/desact …
  • Toshiba

    A135-S7403

    (4 pages)
    This product specification is variable and subject to change prior to product launch. © Copyright 2007 – 2008 Toshiba America Information Systems Inc. All Rights reserved. TAIS shall not be liable for damages of any kind for use of this information, which is subject to change without notice. A135-S7403 BTS Rev. 1.00 2007-08-22 MCL T20070720 CB1.02 …

Comments, Questions and Opinions: