Manualios.com

GE 45138 Operation & User’s Manual

GE 45138 Manual Online:

3.8, 2199 votes
GE 45138 User Manual
GE 45138 User Guide
GE 45138 Online Manual

Text of GE 45138 User Guide:

  • GE 45138, 2 3 Important Safeguards 4 Introduction 5 Installation 6 Adding a Signal Repeater to the system 6 Testing the Signal Repeater or your system 6 Low battery indicator 7 Battery warnings 7 FCC Warning 8 Table of Contents

  • GE 45138, 2 3 Before connecting or operating the SIgnal Repeater, please read these instructions carefully and save this manual for future reference. Congratulations The GE Choice Alert ™ Wireless Alarm System is one of the most affordable and expandable wireless alarm systems available. You’ll discover the system offers many features typically found in custom installed Alarm systems. The Choice Alert system is reliable and easy-to-use. With Choice Alert you can select from a line of Sensors and Accessories; start sma

  • GE 45138, 4 5 Important safeguards PreCautions 1. Do not attempt to disassemble the Signal Repeater, unless described in the user’s manual. There are no user serviceable parts. 2. Handle with Care – Avoid striking or shaking. Improper use or storage could damage the Signal Repeater. Modifying or tampering the device or its internal components can cause a malfunction and void the Signal Reapeater’s warranty. 3. If you feel the Signal Repeater or any part of the Choice Alert system is not operating correctly or as described, please contact Customer S

  • GE 45138, 4 5 Introduction The Signal Repeater will extend the range of the Choice Alert system up to 150 feet from its location – Effectively repeating the signal from any Sensor back to the Control Center should a Sensor be located out of range. The Signal Repeater does not send or receive signals to the Silent Alert or Alarm Siren, or from other Signal Repeaters. Check List Identify all the parts before proceeding. Signal Repeater

  • GE 45138, 6 7 Adding a Signal Repeater Step 1 - Find an electric outlet near the Sensor having trouble communicating with the Control Center. Make certain the location is between the Sensor and Control Center. Plug the Signal Repeater into the outlet and press the ‘Test’ button on the side of Signal Repeater. It will send a test signal out to the Control Center and the LED indicator on the Signal Repeater will flash rapidly for about one second, then go

  • 6 7 Step 3 - When the Signal Repeater receives the confirmation signal, the LED indicator will flash, five times. If the Signal Repeater does not receive the confirmation signal from the Control Center, the LED indicator on the Signal Repeater will not flash. You will need to move the Signal Repeater closer to the Control Center a

  • GE 45138, 8 9 FCC Warning Any unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal laws. The Choice Alert system complies with part 15 of the FCC rules. Operation is subject to the following conditions: 1) The Choice Alert system may not cause harmful interference. 2) The Choice Alert system may accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested and found to com

  • 8 9 WARNING Limitations of Alarm Products This product should be tested periodically to make sure it is working properly. The product, if used properly, may reduce the risk of burglary, robbery, or other adverse events. However, JASCO is not an insurer, this product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves

  • GE 45138, is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 1 year limited warranty. Visit www.jascoproducts.com for details. 45138-1 01/09/08

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Yealink MeetingSpace VC800 Administrator's manual yealink/meetingspace-vc800-464.pdf 26 Jul 2023 295
2 Marantz AV8003 Manuel marantz/av8003-7D9.pdf 20 May 2023 31
3 LST 2351E Specification sheet lst/2351e-R9J.pdf 24 Jul 2022 1
4 Zavio S5040 Quick installation manual zavio/s5040-W9D.pdf 11 Nov 2023 16
5 Weslo Pursuit 655s Manual  weslo/pursuit-655s-697.pdf 19 Feb 2024 16 0.72 Mb
6 Sea & Sea VX-HC1 Pro Instruction manual sea-sea/vx-hc1-pro-IUS.pdf 21 Feb 2023 12 0.7 Mb

Similar Resources:

  • Abocom

    CAS2047

    (2 pages)
    - 1- BroadBand Router (with 4-Port EtherSwitch) Quick Installation Guide M73-APO07-390 STEP 1: CABLING Figure 1 Cable/xDSL modemISPInternet UTP Ethernet standard /cross-over cable1-11-21-3 1-3 1-3 1-3 1-1. Connect the power adapter to this product and power it on.  The LED of Power will illuminate after this step. 1-2. Apply the UTP cable to conne …
  • SMC Networks

    SMC7908VoWBRA

    (2 pages)
    The VoIP Configuration Guide assumes your Internet is already set up. For instructions on setting up your Internet connection please refer to the Quick Installation Guide (QIG) provided.1. The first step is to verify your VoIP service provider has provided all the required configuration settings. The followingtable lists the mandatory settings required for s …
  • Asus

    RT-AC68U

    (88 pages)
    Quick Start GuideRT-AC68U Dual Band3x3 Wireless-AC 1900 Gigabit Router®8UNA8104 / second Edition / May 2013NA8104_RT-AC68U_QSG_v2.indb 1 5/10/13 3:50:50 PM …
  • NetComm

    N3G002W

    (4 pages)
    N3G002W / N3G005W / N3G007W Firmware Upgrade Instructions Purpose: This document describes the steps necessary to perform a firmware upgrade on the N3G002W / N3G005W / N3G007W with the latest firmware (available on the NetComm website). To ensure a successful firmware upgrade please follow the below instructions. Firmware files location: To download th …
  • Cisco

    6000 series

    (158 pages)
    Interface and Hardware Component Configuration Guide for Cisco NCS6000 Series Routers, IOS XR Release 6.4.xFirst Published: 2018-03-23Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883 …
  • D-Link

    DSL-2750U

    (3 pages)
    DSL-2750U Wireless Setup Guide Step 1: Open your Internet browser (ex. Internet Explorer, Mozilla, Google Chrome, Safari) and type in the Routers IP address in the address bar and press enter. (Default IP 192.168.1.1). Step 2: Type in the User Account Credentials for the router, then click OK/Log In. By default the Username is: admin and the Passwor …

Comments, Questions and Opinions: