Manualios.com

Jensen JN102 - 10.2" LCD Overhead Monitor System Installation Manual

  • JN102 - 10.2" LCD Overhead Monitor System DVD Player
  • maah01pMZZ/DU
  • Installation Manual
  • PDF / Adobe Acrobat Reader
  • 11

Jensen JN102 - 10.2" LCD Overhead Monitor System Manual Online:

3.4, 2932 votes
Jensen JN102 - 10.2" LCD Overhead Monitor System User Manual
Jensen JN102 - 10.2" LCD Overhead Monitor System User Guide
Jensen JN102 - 10.2" LCD Overhead Monitor System Online Manual

Text of Jensen JN102 - 10.2" LCD Overhead Monitor System User Guide:

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television receptio

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, GENERAL INSTALLATION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP, Video Game, external amp, wireless headphones, VCP, etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups. 3) Decide upon mounting locations of all components and method of mounting. 4) Prep the vehicle by removing any interior trim necessary to gain access to vehicle's wiring as well as all areas where interconnecting wire harnesses will need to be located. If any access holes need to be cut into the vehicle (headliner, other trim components etc.), this

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, VEHICLE PREPARATION: 1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v when key is off), and also a good ground generally, these wires can be found at the ignition switch or fuse-box. 2) The mounting method and location will vary from vehicle to vehicle, so this manual will only focus on the installation of the video monitor and related console accessories. 3) Generally, the best location for the video monitor is where the vehicle's factory dome light is in- sta

  • MINI CONSOLE INSTALLATION: This page only covers special installation considerations for the mini-console installation. If the video monitor is to be installed in a vehicle with the mini console, this console may need to be trimmed to fit the contour of the vehicle headliner. 1) In this installation, the video monitor is mounted directly to the overhead cross-member in the

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, -5- MOUNTING THE MINI-CONSOLE Roof Roof Support Headliner 12”x9”x3/4” Plywood Block (4) Self-Tapping Screws (not supplied) Mini-Console Video Unit (5) #8 Flat Washers (5) #8x3/4” Self-Tapping Screws

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, -6- JN102 Figure A 1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Insert the Circular Mini-Din Connector of the source component harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB. 3) Pull the wire tie loop tight and cut off the excess. 4) Connect the 12 pin harness to the mating connector on the Video Monitor. 5) Connect power harness to vehicle’s electrical system by tapping into an accessory hot line and a good ground. 6) Verify all functions of the System before final mounting of the finished assembly. 7) Mount and connect the Televisio

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, Positive Switched Dome lighting -7- CONNECTING THE DOME LIGHTS The dome lights in the video monitor require three connections to the vehicle's wiring. There are two common types of dome light circuits used, positive or negative switched. Positive systems supply voltage to the interior lights to turn them on, negative switched systems apply ground to illuminate the bulbs. To determine which system you have you must locate the wires at the dome light. On a positive switched system, with all the doors closed and the lights out, both wires at the dome light will rest at ground. When the light is activated, one of these wires will switch

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, Troubleshooting: SYMPTOM: No power at Video Monitor Power but no video or sound Picture, but no sound Static on TV Stations (Tuner Version Only) No Infrared remote func- tions for VCP (or other com- ponents) REMEDY: -Verify +12 VDC on Red wire at 2 pin Power Harness behind video monitor. Verify ground connection with continuity test from known good ground to black wire at 2 pin Power Harness -Verify that the correct source is selected (i.e.: 1,2,3 or 4). Verify that the source is on and playing a known good media (such as a videotape). Verify connections at both ends of the source component harness. -Push

  • Jensen JN102 - 10.2" LCD Overhead Monitor System, © Copyright 2006 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788 128-7390BA WWW .audiovox.com For Customer Service Visit Our Website At Product Information, Photos, FAQ’s Owner’s Manuals

Related Products and Documents (DVD Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Singer 153W104 Parts list singer/153w104-8KF.pdf 11 Oct 2022 27 1.28 Mb
2 Vade Retro mailcube Administrator's manual vade-retro/mailcube-T1G.pdf 26 Jul 2022 68
3 Toshiba SD-63HK Owner's manual toshiba/sd-63hk-78C.pdf 07 Oct 2023 40 1.84 Mb
4 Candy C 420 User instructions candy/c-420-9X9.pdf 07 Oct 2023 32 7.35 Mb
5 Peavey MDJ-1150 Features peavey/mdj-1150-T1J.pdf 21 Jul 2023 1 0.05 Mb
6 Aironet AP4500-E Technical reference manual aironet/ap4500-e-O8T.pdf 19 May 2023 186

Similar Resources:

  • Philips

    27PC4326/37B

    (2 pages)
    ANT.AUDIO OUTAUDIO OUTCOAXIALCOAXIALINOUTOR3CABLE BOXCABLE TV SIGNALRF COAXIALCABLEANT.4ANT.ANTENNA or CABLE TV SIGNAL21Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after youhave finished hooking up everything. Never make or change connections with equipment connected to the power outlet.2If you do not ha …
  • Philips

    DVP3005K/69

    (2 pages)
    PhilipsDVD playerKaraokeDVP3005KSee, hear, play everythingDoes size matter? Ever heard of less is more? Introducing the best value DVD player. No complications! Just a simple set that plays practically any disc format, including your digital photos with absolutely no compromise to picture quality.Great audio and video performance• Progressive Scan compone …
  • Yamaha

    MCX 1000 - MusicCAST - Digital Audio Server

    (111 pages)
    MCX-1000The MusicCAST system consists of the MCX-1000, theMCX-A10 and the MCX-SP10.This service manual is for the MCX-1000.For the MCX-A10 and the MCX-SP10 service manual,please refer to the following publication number:MCX-A10/MCX-SP10100852When accepting a repair order from the user, be sure toinform him/her that the data in HDD cannot be guaranteed.For th …
  • Sanyo

    DVD-SL40

    (14 pages)
    FILE NO.Service ManualCONTENTSDVD Video PlayerDVD-SL40 (AU)PRODUCT CODE No.137 123 07REFERENCE No. SM5810576DVD Mechanism Replacement ............................................. 1Laser beam safety precaution ............................................... 1Mechanism replacement ....................................................... 2How to load software f …
  • Pioneer

    DVR-541H-S

    (25 pages)
    ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936PIONEER CORPORATION 2006Serial No.Model Ty …
  • JVC

    HR-XV2EK

    (114 pages)
    COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTDSERVICE MANUALGeneralPower requirements AC 200-240V, 50/60 HzPower consumption Operation mode : 23W Standby mode : 6.7WDimensions (approx.) 430 X 97.5 X 293 mm (w/h/d)Mass (approx.) 4.8 kgOperating temperature 5˚C to 35˚C (41˚F to 95˚F)Operating humidity 5 % to 90 %Timer 24 hours display tapeProgram capacity …

Comments, Questions and Opinions: