Manualios.com

JVC GR-DVL500 Instructions Manual

JVC GR-DVL500 Manual Online:

4.6, 2718 votes
JVC GR-DVL500 User Manual
JVC GR-DVL500 User Guide
JVC GR-DVL500 Online Manual

Text of JVC GR-DVL500 User Guide:

  • JVC GR-DVL500, EN41 10 ) @ $ ! # % ^ & * ( 2 3 4 6 8 5 7 9 Buttons 1 Infrared beam transmitting window 2 Zoom (T/W) Buttons 3 DISPLAY Button 4 SHIFT Button 5 SLOW Rewind/Forward Buttons Left/Right Buttons 6 REW Button 7 FADE/WIPE Button 8 EFFECT ON/OFF Button 9 EFFECT Button 0 PAUSE IN Connector ! START/STOP Button @ MBR SET Button # SNAPSHOT Button $ Up Button INSERT Button % Down Button A. DUB Button ^ PLAY Button & FF Button * STOP Button ( PAUSE Button ) R.A.EDIT Buttons Functions With the camcorder’s Power Switch set to the camera position (“ ” or “ ”)

  • JVC GR-DVL500, EN17 MULTI-9 Multi-Analyzer 9 FULL Snapshot mode with no frame* FRAME Snapshot mode with frame* MULTI-4 Multi-Analyzer 4 * There is the sound effect of a shutter closing. PIN-UP Pin-Up mode* NOTES: ● Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom. ● If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed. ● If Program AE with special effects (  pg. 28) is engaged, certain modes of Program AE with special effects are disabled during Snapshot r

  • 36 EN PLAYBACK Advanced Connections Connection To A Personal Computer This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equipped capture board installed. 1 Make sure the camcorder and PC are turned off. 2 Connect the camcorder to your

  • JVC GR-DVL500, 44 EN VCR CODE LIST VCR BRAND NAME GE 1 1 9 2 9 ` 9 4 MAGNAVOX 9 5 1 1 7 1 7 6 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 PHILIPS 1 9 9 5 1 1 9 4 9 1 9 6 1 2 JVC 9 1 9 6 9 3 HITACHI 6 6 6 3 A B C BUTTONS (A) (B) VCR BRAND NAME PHILIPS 3 3 7 2 SANYO 3 6 3 5 SHARP 1 5 1 ` SONY 6 5 6 ` 3 9 3 1  TOSHIBA 6 9 6 1 ZENITH 1 6 RCA 9 2 9 4 6 6 6 3 9 ` PANASONIC 1 3 1 7 1 1 9 4 1 8  BUTTONS (A) (B) MBR SET SH

  • EN3 5. Ventilation Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. •Do not block the openings by placing the product on a bed, sofa, rug or other similar surface. •Do not place the product in a built-in installation such as a bookcase or rack

  • JVC GR-DVL500, EN29 Exposure Control Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing. • When the background is overly dark or the subject light. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. 2 Press the MENU/BRIGHT wheel. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ ”, then press it. 4 Rotate the MENU/BRIGHT wheel to select “MANUAL”, then press it. The Menu Screen disappears. “EXP

  • JVC GR-DVL500, 48 EN 1 2 3 4 5 6 7 8 –– T T I O M T – E A I – L N : C – O – D ~ ~ ~ ~ ~ ~ ~ ~ E O – 0 U – 0 T : : – 0 – 0 M ODE R.A.EDIT ON/OFF USING THE REMOTE CONTROL UNIT (cont.) For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR. DIAGNOSING VCR/CAMCORDER TIMING 1 Play back the tape in the camcorder,

  • JVC GR-DVL500, 56 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 30. • The LCD monitor and the viewfinder are made with high-precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor or the viewfinder. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99 %) 31. • This is normal. 32. • The Power Switch is not set to “ ”. 33. • Your TV has AV input terminals, but is not set to its VIDEO mode. • The cassette holder cover is open. 34. • During playback of the unrecorded portion, High- spe

  • JVC GR-DVL500, 70 EN For Connectors S :Y:1 V ( p-p ) , 75 Ω, analog output C : 0.29 V ( p-p ) , 75 Ω, analog output AV Video output :1 V ( p-p ) , 75 Ω, analog Audio output : 300 mV (rms), 1 kΩ, analog, stereo DV Input/output : 4-pin, IEEE 1394 compliant PC (DIGITAL PHOTO) Digital still output : ø2.5 mm, 3-pole JLIP/EDIT : ø3.5 mm, 4-pole AC Power Adapter/Charger AA-V40U Power requirement U.S.A. and Canada : AC 120 V`, 60 Hz Other countries : AC 110 V to 240 V`, 50 Hz/60 Hz Power consumption : 23 W Output Charge : DC 7.2 V , 1.2 A VTR : DC 6.3 V , 1.8 A Dimensions (W x H x D) : 68 mm x 38 mm x 110 mm (2-11/16&qu

  • JVC GR-DVL500, EN47 1 2 3 4 5 6 7 8 – – – – T T I O M T 0 0 0 0 1 – E A I 0 7 3 9 5 – L N : : : : : : C 2 1 3 3 5 – O 5 8 3 0 5 – D ~ ~ ~ ~ ~ ~ ~ ~ E O 0 0 0 1 1 1 U 2 8 5 3 6 6 9 T : : : : : : : 0 3 5 1 2 3 3 5 1 3 5 0 0 9 M – – O – – DE – – – – – – STOP PAUSE R.A.EDIT ON/OFF VCR REC STBY FADE/WIPE EFFECT EDIT IN/OUT CANCEL REW AUTOMATIC EDITING TO VCR 11 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6). 12 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY

  • JVC GR-DVL500, EN37 Video unit equipped with a DV input connector Connection To A Video Unit Equipped With A DV Connector Connection to the GV-DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing ( pg. 39), which offers virtually no image or sound deterioration. 1 Make sure all units are turned off. 2 Make connections to the device you want to connect to us

  • JVC GR-DVL500, 20 EN RECORDING Basic Recording (cont.) DANGER  The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.  Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.  When operating, keep a distance of about 30 cm (11-13/16") between the video light and people or objects.  Do not use near flammable or explosive materials.  It is recommended that you consult your nearest JVC dealer for replacing the video light. LIGHT OFF/AUTO/ON Switch (Open the LCD monitor to access this switch.) FEATURE: Video Lig

  • JVC GR-DVL500, 18 EN 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T RECORDING Basic Recording (cont.) Zoom in (T: Telephoto) Zoom out (W: Wide angle) Power Zoom Lever Zoom display FEATURE: Zooming PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Slide the Power Zoom Lever towards “W”.  The further you slide the Power Zoom Lever, the quicker the zoom action. NOTES: ● Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus (  pg. 21)

  • JVC GR-DVL500, 14 EN 25 90 min 89 min 3 min 2 min 1 min0 min min 180° 90° BR I GHT – + P L A Y O F F RECORDING Basic Recording Power lamp Tally lamp (lights while recording is in progress) Lock Button Recording Start/Stop Button Tape remaining time indicator (Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display MENU/ BRIGHT Wheel Power Switch PUSH OPEN Button NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power (  pg. 8) ● Grip Adjustment (  pg. 10) ● Viewfinder Adjustment (  pg. 10) ● Load A Cassette (  pg. 12) ● Recording Mo

  • JVC GR-DVL500, EN35 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 34). If using a VCR . . . go to step 3. If not . . . go to step 4. 3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. 4 Turn on the camcorder, the VCR and the TV. 5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. To choose whether or not the following displays appear on the connected TV . . . • Date/Time .... set “DATE/TIME” to “ON” or “OFF” in the Menu Screen ( pg. 32). �

  • JVC GR-DVL500, EN69 SPECIFICATIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Charger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.3 W LCD monitor on, viewfinder off : Approx. 5.3 W Video light : Approx. 3.5 W Dimensions (W x H x D) : 80 mm x 96 mm x 159 mm (3-3/16" x 3-13/16" x 6-5/16") (with the LCD monitor closed and the viewfinder pushed down) Weight : Approx. 570 g (1.3 lbs) Operating temperature :0°C to 40°C (32°F to 104°F) Operating hum

  • JVC GR-DVL500, EN7 AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when “DEMO. MODE” is set to “ON” (factory-preset).  Available when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder.  Performing any operation during the demonstration stops the demonstration temporarily. If no operation is per- formed for more than 1 minute after that, the demonstra- tion will resume.  “DEMO. MODE” remains “ON” even if the camcorder power is turned off.  To cancel Automatic Demonstration, set the Power Switch to “ ”, then press the MENU/BRIGHT wheel while the demo is in progress. This takes you directly

  • JVC GR-DVL500, EN57 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 39. An error indication (E01 — E06) appears. 40. The charger indicator on the AC Power Adapter/ Charger does not light. 41. Picture does not appear on the LCD monitor. 42. When the image is printed from the printer, a black bar appears at the bottom of the screen. 43. When the camcorder is connected via the DV connector, the camcorder does not operate. 39. •A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable. 40. •The temperature of the battery is extremely high/low. •Charging is difficult in places sub

  • JVC GR-DVL500, 46 EN 1 2 3 4 5 6 7 8 –– T T I O M T – E A I – L N : C – O – D ~ ~ ~ ~ ~ ~ ~ ~ E O – 0 U – 0 T : : – 0 – 0 M ODE PLAY R.A.EDIT ON/OFF EFFECT FADE/WIPE EDIT IN/OUT CANCEL SELECT SCENES 4 Point the remote control at the camcorder’s remote sensor. Press PLAY ( 4 ) and then press R.A.EDIT ON/ OFF on the remote control. The Random Assemble Editing Menu appears. 5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control. •Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed. •You cannot use a Picture Wipe

  • JVC GR-DVL500, 28 EN 1/60 1/100 1/250 1/60 1/100 1/250 4 P . A S S V S S S E L L I O H H H / O O D F U U U E W W E F T T T F O T T T F 1 E E E E 4 0 E R R R C x x C T HO RECORDING Advanced Features (cont.) Program AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. 2 Press the MENU/BRIGHT wheel. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ ”, then press it. 4 Rotate the MENU/BRIGHT wheel to select the desired mode, then press it. Selection is complete. •The P.AE/EFFECT Menu disappears and the selected mode is activated. The selected mode indicator appea

  • 30 EN White Balance Adjustment A term that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproductio

  • JVC GR-DVL500, EN11 P L A Y O F F 4 FAD W W R O F F F E I I A F A A A R P P N F D D D / E E D E E E W – – O R R R I S S M – – – P C H W B M E R U H L O O T I A S L T T C A L E E K I R C 1 O D T C R N A I L D E T M O I T S E E C S U C / K P R R T C L N E I O A A E M D D Y N E E M D E E P N C M U 25 5 ’ : 0 3 0 0 J. Date/Time Settings The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback ( pg. 32). 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is tu

  • 16 EN P L A Y O F F FULL RECORDING Basic Recording (cont.) Snapshot This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch. 2 Choose the appropriate Snapshot mode from the 5 available by repeatedly pressing MODE until the desir

  • EN5 SAFETY PRECAUTIONS Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user. When carrying, be sure to always securely attach and use the provided

  • JVC GR-DVL500, 24 EN : Factory-preset Menu Screen Explanations (cont.) RECORDING Advanced Features (cont.) DIS TELE MACRO Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. When “DEMO. MODE” is set to “ON” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resum

  • JVC GR-DVL500, LYT0534-001C EN DIGITAL VIDEO CAMERA INSTRUCTIONS GR-DVL500 GR-DVL300 For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No. Serial No. ENGLISH CONTENTS AUTOMATIC DEMONSTRATION 7 GETTING STARTED 8 – 13 RECORDING 14 – 30 Basic Recording................................. 14 Advanced Features ............................ 21 PLAYBACK 31 – 37 Basic Playback.................................. 31 Advanced Features ............................ 32 Basic Connections .............................. 34 Advanced Connections ......................... 36 DUBBING 38 – 39 Dubbin

  • JVC GR-DVL500, 22 EN 1 D T W W C R I E I I A E S L D N M M T E E D A U R N R M M C E U N A O U S A C D T E L R E T O ME O O N N F U F P L A Y O F F END 1 O D T C R N A I L D E T M O I T S E E C S U C / K P R R T C L N E I O A A E M D D Y N E E M D E E P N C M U 25 5 ’ : 0 3 0 0 J. 4 FAD W W R O F F F E I I A F A A A R P P N F D D D / E E D E E E W – – O R R R I S S M – – – P C H W B M E R U H L O O T I A S L T T C A L E E K I R C 1 R S Z G T I D S R E O O A A D E I E C U O I L M D C T N M N L N O E A U M D Y U . M R O U M M L E N D M P B O E

Related Products and Documents (Digital Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sansui HDLCDVD320 Specifications sansui/hdlcdvd320-6TY.pdf 17 Apr 2023 1 0.07 Mb
2 Sammic SL-21D Operation & user’s manual sammic/sl-21d-H7J.pdf 08 Dec 2022 28
3 DeLonghi DCH5091ER Instructions delonghi/dch5091er-57I.pdf 11 Feb 2023 4
4 Direct Air PHRV Installation, operation and maintenance manual direct-air/phrv-82E.pdf 18 Sep 2022 16
5 Fellowes AutoMax 300C Instructions before use fellowes/automax-300c-RK1.pdf 27 Jun 2022 4
6 John Deere GS2 1800 Operator's manual john-deere/gs2-1800-Q3M.pdf 30 Mar 2023 162

Similar Resources:

  • Polaroid

    PDC 1300

    (8 pages)
    1300PDC 1300 Quickstart Card side 2Camera features Status panel display Control panel The camera has two LCD menus:Refer to the Polaroid PhotoMAX PDC 1300 User’s Guide for more information.Press the Menu Dial to display menu options, change between RECORD and PLAY mode, and make a selection. Turn the Menu Dial to scroll between different menu choices and s …
  • Disney

    PIX CLICK

    (18 pages)
    Disney Elements © Disney 2009. All rights reserved. All brandsand product names are trademarks of their respective owners.TM and © 2009 Digital Blue, Inc. Distributed by Digital Blue, Inc., 1517 Johnson Ferry Road, Marietta, GA, 30062 …
  • GE

    C1433

    (81 pages)
    GE Digital CameraC1433 / Z4300AppendixCamera connectivityUsing the MenusPlaybackCamera function controlsBasic operationPreparationsUser Manualimagination at work …
  • Perenio

    PEIRC01

    (4 pages)
    PEIRC01 Indoor Motor Camera Beltéri forgó kamera Quick Start Guide Gyors üzembe helyezési útmutató Perenio Smart: Building Management System perenio.com …
  • FujiFilm

    F650

    (148 pages)
    OWNER’S MANUALThis manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix F650 correctly.Please follow the instructions carefully.BL00541-201(1)Getting ReadyUsing the CameraAdvanced Features• PhotographySettingsCamera ConnectionSoftwareInstallation• Playback•MovieAppendicesTroubleshooting …
  • Conrad

    75 16 17

    (8 pages)
    2,4 GHz Digital-Funk-Kamera Version 03/09inkl. Akku °Best.-Nr. 75 16 17Bestimmungsgemäße VerwendungDiese digitale 2,4 GHz Funk-Farbkamera dient, im Zusammenhang mit einem geeigneten digitalen 2,4 GHz Funkempfänger, der Überwachung und Sicherung von uneinseh-baren bzw. kritischen Bereichen (wie z.B. Ladenüberwachung, Haussprechanlagen,Eingangsbereiche, …

Comments, Questions and Opinions: