JVC KD-LH1100 Instructions Manual
|
24 ENGLISH Changing the general settings (PSM) You can change the items listed on the table below and on page 25 by using the PSM (Preferred Setting Mode) control. • The PSM items are grouped into six categories—MOVIE, CLOCK, DISP (display), TUNER, AUDIO, and COLOR. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See p
JVC KD-LH1100, ENGLISH 5 Remote controller 3 • Selects the preset stations while listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. • While playing an MP3 disc on an MP3- compatible CD changer; – Skips to the previous disc if pressed briefly. – Skips to the previous folder if pressed and held. Note: While playing a CD on a CD changer, this always skips to the previous disc. 4 Functions the same as the control dial on the main unit. Note: These buttons do not function for
JVC KD-LH1100, 32 ENGLISH Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Pull the control panel out of the unit. 3 Put the detached control panel into the provided case. Attaching the control panel 1 Insert the right side of the control panel into the groove on the panel ho
JVC KD-LH1100, 40 ENGLISH EXTERNAL COMPONENT OPERATIONS Playing an external component You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). Preparation: For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume). Before operating the external component, select the external input correctly, follow the procedure below. • See also “Changing the general settings (PSM)” on pages 24 and 25. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2 Press number button 5 to selec
2 ENGLISH How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or a similar tool. This will reset the built-in microcomputer. Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. IMPORTANT FOR LASER PRODUCTS Precautions: 1. CLASS 1 LASER PRODUCT 2. CAUTION: Invisible laser r
JVC KD-LH1100, 7 ENGLISH 4 Adjust the sound as you want. (See pages 20 – 22.) Note: While playing a source, you can also show the level meter on the display. For details, see “Activating the level meter” on page 23. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again. • If you turn the control dial, you can also restore the sound. To turn off the power Press and hold for more than one second. • If you turn off the power while listen
JVC KD-LH1100, 10 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast. 2 Start searching a station. When a station is received, searching stops. To stop searching before a station is received, press the sam
JVC KD-LH1100, 19 ENGLISH Changing the display pattern By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Notes: • When the disc title/performer is shown, the (disc) indicator lights up. When the track title is shown, the (track) indicator lights up. • If the information cannot be shown at a time, it will scroll on the display. Some characters or symbols will not be shown (will be blanked or substituted) on the display. • If no name is assigned to the conventional CD, “NO NAME” will appear. To assign a name to a conventional CD, see page 31. • If no di
30 ENGLISH Creating your own color—User You can create your own colors—“Day” and “Night,” and select them as the display color for any desired source. • Day: Can be used as your user color during the day time (while the headlights are turned off). • Night: Can be used as your user color during the night time (while the headlights are turned on.) 1 Pres
JVC KD-LH1100, 23 ENGLISH Activating the level meter You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Press EQ (equalizer) twice. Last selected level meter appears on the display. The next-step-operation buttons start flashing. 2 Select the level meter pattern you want. As you turn the control dial, the level meters change as follows: Meter 1: The audio level meter fluctuates vertically. Meter 2: The speaker on the display vibrates as input audio level changes. Meter 3: The left and right aud
JVC KD-LH1100, 13 ENGLISH Selecting a preset station using the preset station list If you forget what stations are stored in what preset numbers, you can check the preset station list, then select your desired station. 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: 2 Press and hold 5 (up) or ∞ (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display. Notes: • You can show the other FM band preset station lists (FM1, FM2, or FM3) by pressing 5 (up) or ∞ (down). • If a name has been assigned to a station (see page 31), it will be shown instead of the station frequency. 3 Select t
14 ENGLISH Changing the display pattern By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Small animation display 1 Small animation display 2 Large animation display Clock time display If a name has been assigned to a station it will be shown instead of “NO NAME.
JVC KD-LH1100, 45 ENGLISH SPECIFICATIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 12 kHz Level: ±10 dB Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/Impedance: KD-LH1150: 4.0 V/2
JVC KD-LH1100, 31 ENGLISH 3 Select the character set you want while the first character position is flashing. Each time you press the button, the character set changes as follows: 4 Select a character. • About the available characters, see page 41. 5 Move the cursor to the next (or previous) character position. 6 Repeat steps 3 to 5 until you finish entering the name. 7 Finish the procedure while the last selected character is flashing. To erase the entered characters Insert spaces using the same procedure described above. Notes: �
JVC KD-LH1100, 18 ENGLISH Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot. While pressing CD/CD-CH, press and hold for more than 2 seconds. “No Eject” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and unlock the CD While pressing CD/CD-CH, press and hold again for more than 2 seconds. “Eject OK” flashes on the display for about 5 seconds, and the CD is unlocked. To play back only intros (Track Intro Scan) You can play back the first 15 seconds of each track sequentially. 1 Press M (MODE) while playing a CD. “Mode” appears on the display. The next-step-operation
JVC KD-LH1100, 20 ENGLISH SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. • “Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment. 1 Select the item you want to adjust. The next-step-operation buttons start flashing. Each time you press SEL (select), the adjustable items change as follows: Indication To do: Range Fad* 1 Adjust the front R06 (Rear only) and rear speaker | balance. F06 (Front only) Bal Adjust the left L06 (Left only) and right
JVC KD-LH1100, 9 ENGLISH Setting the clock You can also set the clock system to either 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 24 and 25.) The next-step-operation buttons start flashing. 2 Press number button 2 to select “CLOCK”—Clock category of the PSM settings. The “Clock Hr” (hour) setting screen appears on the display. 3 Adjust the hour. 4 Set the minute. 1 Select “Clock Min” (minute). 2 Adjust the minute. 12 5 Set the clock system. 1 Select “24H/12H.” 2 Select “24Hours” or “
JVC KD-LH1100, 26 ENGLISH To set the movie demonstration—Graphics When shipped from the factory, the movie has been activated. • All Demo: If no operation is done for about 20 seconds, the movie demonstration starts automatically. • Int Demo: If no operation is done for about 20 seconds, the movie demonstration and playback source indication appears alternately on the display. • Off: Cancels the movie demonstration. To select the source animation on the display—KeyIn CFM When changing the source, the display shows the source animation. You can select the source animation on the display accordin
JVC KD-LH1100, 33 ENGLISH CD CHANGER OPERATIONS Playing discs Select the CD changer (CD-CH). * If you have changed “Ext Input” setting to “Line In” (see page 27), you cannot select the CD changer. • When the current disc is an MP3 disc: Playback starts from the first folder of the current disc once file check is completed. We recommend that you use the JVC MP3- compatible CD changer with your unit. By using this CD changer, you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you
JVC KD-LH1100, 39 ENGLISH Changing the display information While playing back an MP3 file, you can change the MP3 disc information shown on the display. Note: When playing a CD or a CD Text, you can also change the disc information, see page 19 for details. Each time you press the button, the display changes to show the following: Notes: • When the folder name is shown, the (folder) indicator lights up. When the file name is shown, the (file) indicator lights up. • If the information cannot be shown at a time, it will scroll on the display. Some characters or symbols will not be shown (w
1 KD-LH3150/KD-LH3100 KD-LH1150/KD-LH1100 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESPAÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGATIVA. INSTALACION (MONTAJE EN EL TABLERO DE INSTRUMENTOS) • La siguiente ilustración muestra una instalación típ
JVC KD-LH1100, 11 ENGLISH 3 Tune in to a station you want while “Manual Search” is flashing. • If you release your finger from the button, the manual mode will automatically turns off after 5 seconds. • If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button. When an FM stereo broadcast is hard to receive: 1 Press M (MODE) while listening to an FM stereo broadcast. “Mode” appears on the display. The next-step-operation buttons start flashing. 2 Press number button 1 to select “Mono On” while “Mode” is still on the displ
JVC KD-LH1100, 12 ENGLISH 2 Start automatic preset. 1 Press M (MODE). “Mode” appears on the display. The next-step-operation buttons start flashing. 2 Press and hold number button 5, while “Mode” is still on the display. Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons —No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in. M
DOWNLOAD |
JVC KD-LH911 Car Stereo System Instructions manual
KD-LH911 |
JVC KD-DV4202 Car Stereo System Installation & connection manual
KD-DV4202 |
JVC LVT1311-003A Car Stereo System Instruction manual
LVT1311-003A |
JVC KD-AV7000 Car Stereo System Instructions manual
KD-AV7000 |
JVC KD-AV7000 Car Stereo System Instructions manual
KD-AV7000 |
JVC KD-DV7301 Car Stereo System Manual de instructiuni
KD-DV7301 |
JVC KS-RC104 Car Stereo System Installation & connection manual
KS-RC104 |
JVC KD-R326 Car Stereo System Instructions manual
KD-R326 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Shimano | SC-6500 | Service instructions manual | shimano/sc-6500-WM9.pdf | 02 Aug 2023 | 26 | |
2 | Frigidaire | FEB27T7DCC | Parts catalog | frigidaire/feb27t7dcc-7X2.pdf | 16 Sep 2023 | 10 | 0.59 Mb |
3 | Para systems | MM250XL/ 1 | Owner's manual | para-systems/mm250xl-1-D4J.pdf | 22 Jul 2022 | 12 | |
4 | CORNING | CoolCel | Instructions for use | corning/coolcel-3T5.pdf | 26 Apr 2023 | 2 | |
5 | ECS | Z97-PK | Operation & user’s manual | ecs/z97-pk-45B.pdf | 30 Nov 2022 | 84 | |
6 | Napoleon | LV50N | Installation and operating instructions manual | napoleon/lv50n-1B9.pdf | 26 Sep 2022 | 136 |
Metra Electronics
APPLICATIONSMETRA. The World’s best kits.™metraonline.com1-800-221-0932© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION REV. 2/19/2014 INST99-7335SCAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before re …
99-7335S(8 pages) |
Discount Car Stereo
Courtesy of:DiscountCarStereo.com Serving the internet community since 1995 BLU-CR12 Bluetooth music streaming adapter installation Guide for Porsche CR-1& CR-2 Radios Created: January 11, 2018 Revised: January 10, 2020
…
BLU-CR12(4 pages) |
Sony
©2010 Sony CorporationOperating Instructions Manual de instrucciones Istruzioni per l’uso 4-197-968-21 (1)XNV-L77BT XNV-770BTXNV-L66BT XNV-660BTGBESITAV NavigationAV Navigation
…
XNV-L77BT(248 pages) |
Blaupunkt
288F0281SAN JOSE MP41High-Power FM/AM/CD/MP3 Receiver with Detachable FaceAutoradio FM/AM à Lecteur CD/MP3 de Forte Puissance et à Face AmovibleReceptor FM/AM/Reproductor de CD/MP3 de Alta Potencia y con Panel ExtraíbleRádio FM/AM/CD/MP3 de Alta Potênciacom Face RemovívelRobert Bosch CorporationSales Group —Blaupunkt Division2800 South 25th Avenue,Br …
San Jose MP41(32 pages) |
Pioneer
High power CD player with FM/AM tunerSyntoniseur FM/AM et lecteur de CD, “Puissance élevée”Operation ManualDEH-3400DEH-2400FDEH-34DEH-24FMode d’emploiEnglishFrançaisEspañol
…
DEH-3400(56 pages) |
Audiovox
OWNER'S MANUALOWNER'S MANUALOWNER'S MANUALOWNER'S MANUALOWNER'S MANUALELECTRONICALLY-TUNEDAM/FM/MPX RADIO WITHAUTO-REVERSE CASSETTE PLAYER,CD CHANGER CONTROLSAND QUARTZ CLOCKModel CP-250
…
CP-250(8 pages) |
Traulsen Refrigerator ADT232NPUT-FHSTraulsen ADT232NPUT-FHS User Guide (Specifications), @3BTS95 ADT232NPUT-FHS, 4 |
Johnson Musical Instrument Amplifier Vintage 50#G2OZ2W Vintage 50: Johnson Musical Instrument Amplifier Owner Documentation Vintage 50, 8 |
Sanyo Cell Phone SCP-2400PDF Guide (@U475OR), Sanyo SCP-2400 Cell Phone (Tuesday 22-08-2023) SCP-2400, 237 |
Precision Rated Optics Measuring Instruments PM-204APrecision Rated Optics Product User Manual: PM-204A PDF Operation manual - 92F97A PM-204A, 8 |
SmartThings Security System ADT Keychain RemoteSmartThings ADT Keychain Remote User Manual (Doc Type: Security System Setup manual) ADT Keychain Remote, 9 |
Kobil Touch terminals PCMCIA Reader B1PCMCIA Reader B1 Operation & user’s manual - 42R5KI PCMCIA Reader B1, 8 |
Pretorian Controller iControliControl (Controller ePDF User Guide, #I22CFJ) iControl, 8 |
Speco DVR CS4Speco DVR Operation instruction manual (File: speco-cs4-operation-instruction-manual-19, 16th Sep 2023) CS4, 19 |
NI Control Unit PXIe-7972RControl Unit Getting started manual (NI PXIe-7972R) PXIe-7972R, 17 |
Magnavox Speaker System MAS-80MAS-80 (Speaker System ePDF User Guide, #777JSA) MAS-80, 23 |
PRONAR Tractor PRONAR 5110PRONAR PRONAR 5110 Manual (Operator's manual), @B65X96 PRONAR 5110, 122 |
AG Neovo Monitor PM-48Monitor #QM1G3Z PM-48, 43 |