Manualios.com

JVC VR-616 Instructions Manual

JVC VR-616 Manual Online:

4.9, 2003 votes
JVC VR-616 User Manual
JVC VR-616 User Guide
JVC VR-616 Online Manual

Text of JVC VR-616 User Guide:

  • JVC VR-616, -- 36 -- JVC VR-616 ● Alarm Reset button is for stopping the external alarm motion. ● AUTO Button is ON/OFF. As pressing this buttons, the divided screen is switched automatically. 4.1.3 REC 4.1.4 PLAY ● By pressing this button, recording starts. The REC LED is on while recording. As pressing this button again, recording is stopped. The REC LED blinks during the Alarm record. ● Press this button to select playback condition. Play LED is on while playing. ( Refer to play mode for more details. ) ●IMAGE SEQUENCE :One playback screen is displayed with time slice on 4/ 9/ 16 divided screen. ● ZOOM : It can be X2 zoomed at any mode. Possible t

  • JVC VR-616, -- 76 -- JVC VR-616 5.7.6 Video Output ● Select the Spot Out channel. ● Select VGA output.( If you check the VGA output, monitor screen quality is worse than before.) ● If there is no VGA output on the VGA output port, press the STOP button and DISPLAY button at the front button for about 3sec then VGA output will be on automatically. ● How to Setup 1) Select what you want to change by using up/down buttons or Jog. 2) When you select Monitor Out, the Spot Out port is the same as the Monitor Out. 3) If you select Input Channel, the selected channel is displayed beside Input Channel. 4) If you check VGA Output Enable, the image is displayed to VGA port. 5) Finish setup by pres

  • -- 89 -- JVC VR-616 ● Motion by Mix Button 1) DISPLAY : Recording channel is displayed with a 1/4/9/16 screen. Because “Multi” is able to check several channels simultaneously, it is useful to search quickly. 2) IMAGE SEQUENCE : Multiple images from a single camera are displayed in order in which they were recorded in a 16 image screen format. 3) TRIPLEX : Possible to view play

  • JVC VR-616, -- 98 -- JVC VR-616 2 2EA, Flash Memory, FDDUSB 1EA, HDD, CD-R/RWIEEE1394 Back_up & Copy yy/mm/dd/, mm/dd/yy, dd/mm/yy, hh/mm/ssMode Time Display Capital/Small Letter, Digit, SymbolCharacter Max 16EA/channelQ’ty ID Character Display 2 HDD Q’ty (EA) ULTRA DMA IDE Internal & Removable TypeHDD Control System Control Part 8 kHzSampling late 1 channel/ Mono, -5dB RCA JackAudio Output 1 channel, Mono RCA JackAudio Input Audio Signal Processor 4 Mode (Date, Time, Channel, Event)Search Mode AUTO Mode 1-300sec, CH Skip FunctionAuto Select Time Live & REC & Simultaneous PBTriplex Full/4/9/16/Sequence/Zoom Playback

  • JVC VR-616, -- 30 -- JVC VR-616 3.5 Installation and Application for Network Interface 3.5.1 Connection and Installation for Remote Control Supports Web server, remote control, and remote file transfer due to 10/100mega Ethernet I/F. Organization of Remote Control 1) Connect Network line, which has a fixed IP, by using the hub. 2) set-up system network at the Setup Menu. Main Menu System Administration Network Setup 3) Link web browser which supports JAVA Applets. ( MS Internet Explorer 6.0, etc. ) 3.5.2 How to Setup Static IP

  • -- 97 -- JVC VR-616 8. Troubleshooting ● Remove the check of "schedule recording". ● Is it in the state of Timer Standby? REC cannot be started even if pressing [REC] button. ● Turn off the Operation Lock● Is the Operation Lock turned on? Menu screen is not displayed. ● Turn off the Operation Lock● Is the Operation Lock turned on? [REC] and [PLAY] buttons do not work. �

  • JVC VR-616, -- 22 -- JVC VR-616 ④ IMAGE SEQUENCE Button : This button is for replay PB screen to IMAGE SEQUENCE mode. ▲ (up) Button : Menu Navigation Button. Moves cursor up. ⑤ ZOOM Button : This is used to zoom a freeze-frame in live or playback mode. Selected screen is X2. ENTER Button : This is for selecting set-up Menu. ⑥ TRIPLEX Button : This button is for replay PB screen to TRIPLEX mode. ▼ (down) Button : Menu Navigation Button. Moves cursor down. ⑦ Freeze Button : This button is for seeing

  • JVC VR-616, -- 85 -- JVC VR-616 5.7.8 About System 5.7.7.7 Lock Front Button ● Lock Front Button : This selection will lock the front panel buttons to prevent unauthorized operation. Only the Menu and Operation button will operate. ● When you press the LOCKED button, the message is displayed on "the button is locked" for a moment. ● This is Software and Bios version of the System. ● An 8 character ID may be selected to identify a recipient. ● Email address are entered into the menu and can include up to 128 characters. 5.7.7.8 Lock Remote Control ● Lock Remote Control : This selection will lock out use of the

  • JVC VR-616, -- 5 -- JVC VR-616 5.7.3 HDD Management ---------------------------------------------------------------- 68 5.7.4 Backup ----------------------------------------------------------------------------------------------------- 72 5.7.5 Auto Select ------------------------------------------------------------------------------------ 75 5.7.6 Video Output ----------------------------------------------------------------------------------- 76 5.7.7 Administration -----------------------------------------------------------

  • JVC VR-616, -- 48 -- JVC VR-616 ● Each symbol means as below. In case Schedule Recording box is checked, recording is started according to schedule regardless of Manual Recording. For using Manual Recording, do not check Schedule Recording box. ! ● From the Manual Recording menu, press the Enter button then the below picture (Recording Events) will display. ·●: Always Recording. · A : Alarm Recording. · M : Motion Recording. · fps/fps : The former ‘fps’ is field rate of Always Recording, the latter ‘fps’ is filed rate of Alarm Recording/Motion Recording. ● As press the ENTER button at the selected block, possible to set up Recording Events of block like above picture. ● Alw

  • JVC VR-616, -- 26 -- JVC VR-616 3.3 Pan/Tilt Camera Connection and Control It is possible to control the Pan/Tilt camera without special devices. The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection. Easy to install from the menu screen and possible to control by using the Jog Shuttle. 3.3.1 The example of connection with TK-C676 or TK-C655 Linked with a power connection, control terminal connection, and video signal output connection. The following figure is the example of connection with 16 sets of TK-C676 or TK-C655.

  • JVC VR-616, -- 8 -- JVC VR-616 IMPORTANT (In the United Kingdom) Mains Supply (AC 230 V) WARNING – THIS APPARATUS MUST BE EARTHED The wires in this mains lead are coloured in accordance with the following code; GREEN-and-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire

  • JVC VR-616, -- 58 -- JVC VR-616 ● How to Setup ⓐ Jog direction of field setup. ⓑ The user field setup is moved to the place by jogging. The first location and the last location can be selected by clicking ENTER. ⓒ Area field setup is moved to the place by jogging and can check the field by using ENTER. ⓓ After setup is finished, move to the higher level menu by clicking EXIT. Y-axis Direction Button X-axis Direction Button Jog Direction Motion must be clicked on Recording Events. After detecting motion by Motion Area, Sensitivity and Sensing Speed, recording is started. ●

  • -- 99 -- JVC VR-616 Fuse T6.3AH 250V 1.2 A (VR-616U), 0.6 A (VR-616E)A Current Consumption 25F/1sec ~ 1F/60sec 10 Step 10 Step Date & time, CH, Name, Event Alarm Input, V-loss, Motion, Disk Full, Admin-PW Changed 4 EA, Low Active Alarm, TTL Level Open collector Velocity Sensitivity Alarm Output Log Display Output Mode Full/Grid(16H*12V)Mode & Grid Motion detect RS-485 (1EA):3P

  • JVC VR-616, -- 74 -- JVC VR-616 ● How to connect removable HDD The jumper of HDD which connects additionally, set-up as slave. (Refer to HDD’s user manual for setup jumper.) ! If Removable HDD is set-up for backup, this HDD’s contents are not be able to replay from the remote place.( Monitoring is possible. ) Separate inside rack from hard rack. Open inside rack and push top cover. Connect data cable of the inside rack with the power line exactly. Close the cover of the inside rack. Notice If the product is being HDD backed-up, you will not be able to use the playback (P/B) via the Internet.

  • JVC VR-616, -- 60 -- JVC VR-616 5.3 Alarm Setup Alarm Setup is used for connecting with external devices such as alarm or buzzer. 5.3.1. Alarm Name How to Setup a. Select alarm channel by using Jog. b. Selects name by using play, right/left, and jog. c. As jog is rotated from right to left, characters change. Possible to write up to 16 alphanumeric and symbolic characters.

  • JVC VR-616, -- 90 -- JVC VR-616 ● You can power off by using the front operate switch. 5.10 Power Off If system is to not be used for long periods of time, turn off the rear panel power switch. If the rear power switch is in the on position, DVR will reboot after a power failure. ! ! You must wait at least 15 seconds after shut down before removing the removable HDD.

  • JVC VR-616, -- 75 -- JVC VR-616 5.7.5 Auto Select ● Select Delay and Skip of the Auto Switch. ● How to Setup 1) Auto Select function is for automatic switchover of the Monitor screen. 2) Delay of the Auto Switch range is 1 ~ 300sec. 3) All Channels are On when the system starts for the first time. 4) When select Skip Video Loss Channel, no signal channel is notdisplayed in case of sequence which is displayed only one channel. 5) Auto Select of User Define is automatically switching by modeswitching.

  • JVC VR-616, -- 47 -- JVC VR-616 5.2 Recording Setup 5.2.1 Manual Recording Manual Recording is for setup recording condition of each channel as pressing REC button when it is not recorded according to schedule. ● Possible to control recording for each channel as pressing REC buttons. ● As pressing Enter button after moving cursor to channel by using Jog, channel for setup will be changed blue bar as blow. In case Schedule Recording Box is checked, Manual Recording is not working.

  • JVC VR-616, -- 86 -- JVC VR-616 5.7.9 Default in Setup Menu ● Design and specifications are subject to change without notice. AdministrationVideo OutputAuto Select Web Server Port Number : 80 Date Display : m/d/y (VR-616U) d/m/y (VR-616E) Password : Not installed Web Password : Not installed Covert Channel : Not installed Mail Notification : Not installed Port Number (SMTP Server) : 25 Lock Front Button : OFF Lock Remote Control : OFF Spot Output : Monitor Output (Input Channel : 1) (Interval : 3sec) (Ch1-16 : All ON) (Monitor Output : OFF) (Skip V.Loss : ON) VGA Output Enable. : OFF Interval : 3sec Channel Selection 1-16 : All ON Skip Vid

  • JVC VR-616, -- 94 -- JVC VR-616 7.2 Details ● REC Button : When the REC LED is on, DVR is recording as per set-up instructions. ● ALARM RESET Button : Stops the Alarm Output. ● INPUT Button :These buttons are used to select the screen monitors and to change the channel settings at the menu. If you want to change channel, press 01,02,03,…10,11,…16. ● AUTO Button : The Input channel is automatically switched in proportion to the speed setting at the menu. ● ZOOM Button : This is used to zoom a freeze-frame in playback mode. Power is X2. ●PLAY :This button is for playback. S

  • JVC VR-616, -- 23 -- JVC VR-616 • Rear ① LAN : Enables screen search and control via Network. (Please use a category 5 cable with a shield.) ② USB Port 1,2 : For backup with external FDD or memory stick. It does not work both USB1 & 2 at the same time. Please use one of them. ③ Spare : This terminal is not used. ④ RS-485 : For connecting with external Pan/Tilt camera. (Please use a twisted-pair cable with a shield.) ⑤ ALARM IN : For alarm input. (Please use a shielded cable.) ALARM OUT : For alarm outpu

  • JVC VR-616, -- 59 -- JVC VR-616 (Unit : Hour) 499324961872156012489366243121561041 3994199714971248998748499249124832 3495174713101092873655436218109723 29951497112393674856137418793624 2496124893678062446831215678525 199799874862449937424912462416 14977485614683742801879346317 Record Condition HDD : 240 Gbyte, Audio Sampling Rate : NONE 499324961872156012489366243121561041 3495174713101092873655436218109722 29951497112393674856137418793623 2496124893678062446831215678524 2496124893678062446831215678525 199799874862449937424912462416 14977485614683742801879346317 Record Condition HDD : 240 Gbyte, Audio Sampling Rate : 8KHz 1F/ 16S 1F/ 8S 1

  • JVC VR-616, -- 24 -- Digital Video Recorder 3. 3. Explanation and Application 3.1 Basic Schematic of the DVR System : This system can record up to 16 composite video signals. Ability to check multiple screens during playback by using monitors & VGA units. It supports screen search, monitor, and remote control through the Network. 3.1.1 Basic Schematic Video signal of the input channel is 1.0 Vp-p on a 75Ω load. THROUGH OUT is changed to Hi-Z Automatically. NETWORK

  • -- 62 -- JVC VR-616 5.3.2.2 Events ● Alarm has occurred according to select events such as Disk Full, Admin PW. Changed Video Loss, Motion Detect. ● Checks event you want to detect from the Events menu by using Jog and ENTER button. ● Each event type is indicated by the following. Disk Full : When HDD is fully recorded. Admin.PW Changed : When Admin Password has been changed.

  • JVC VR-616, -- 43 -- JVC VR-616 5.1.2.2 Camera Name ● Name : Possible to create an alphanumeric nickname of up to 16 characters (including symbols) as shown below. You can see the next character repeatedly by using Jog. How to Use 1) Selects Name by Jog. 2) Possible to write and amend if you press the ENTER button. 3) Writes and amends by using the RIGHT/LEFT button and Jog. 4) Complete by clicking the ENTER button. It is NOT possible to display all the characters when the screen is divided into more than 6 pictures. In

Related Products and Documents (DVR):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Altronix HubWay EX32 Specifications altronix/hubway-ex32-MA8.pdf 25 Oct 2022 2
2 Weider WESY87100 Operation & user’s manual weider/wesy87100-61O.pdf 11 Dec 2022 28 0.66 Mb
3 Bayou Classic KDS-144 Owner's manual bayou-classic/kds-144-11A.pdf 07 Dec 2022 20
4 Electrolux Flymo Instructions manual electrolux/flymo-HI1.pdf 07 Sep 2022 9
5 Moog Videolarm SM7TN-3 Installation and operation instructions manual moog-videolarm/sm7tn-3-P3H.pdf 24 May 2023 10 2.58 Mb
6 ROSE DISPLAYS ANOFRAME ROUND WITH 2 WALL MOUNTS Manual  rose-displays/anoframe-round-with-2-wall-mounts-194.pdf 25 Jan 2024 2 0.12 Mb

Similar Resources:

  • Clover

    LCD2284DVR

    (2 pages)
    Two Indoor & Two Outdoor Night Vision CamerasTwo Indoor & Two Outdoor Night Vision CamerasView Your Business orHome From Anywherein the WorldView Your Business or Home From Anywhere in the WorldModel # LCD2284DVR• 2-way Audio Through Internet• 8 Camera Capacity• 15 Month Recording Time• Alarm & Motion Detection• MPEG - 4• Mouse & …
  • Abus

    TVHD800x0

    (366 pages)
    ABUS HD-SDI Digitalrekorder TVHD800x0 Bedienungsanleitung User manual Manuel utilisateur Gebruikershandleiding Brugerhåndbog Instrukcja obsługi Version 1.2 …
  • Panasonic

    WJND300 - NETWORK DISC RECORDR

    (27 pages)
    Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Administrator ConsoleOperating Instructions Model No. WJ-ND300 …
  • Speco

    DVR-DS4TN

    (1 pages)
    4 Bay External Firewire Hard DriveStorage System for TN Series DVRsSpecifications subject to change*HQ-1 is a trademark of the Sony CorporationFor more information contact us at:Speco Technologies 200 New Highway, Amityville, NY 11701 Web: www.specotech.comToll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: 631-957-9142 or 631-957-3880DVR-DS4TNDVR-DS4TN …
  • Digisol

    DG-CH1130

    (64 pages)
    DVR User Manual 1 DG-CH1130 8CH AHD MINI DIGITAL VIDEO RECORDER User Manual V2.0 2016-05-05 As our products undergo continuous development the specifications are subject to change w …
  • TiVo

    Bolt

    (2 pages)
    TIVO BOLT AUDIO & VIDEO SETTINGSOn the TiVo Central screen, move to ‘Settings & Messages’ and press SELECT - the round button at the center of the arrows circle on your remote. Then move to ‘Audio & Video Settings’ and press SELECT.Audio & Video settings include:• Language & Audio Description• Dolby Audio• Sound effects Volu …

Comments, Questions and Opinions: