Manualios.com

JVC LVT1148-010A Instructions Manual

JVC LVT1148-010A Manual Online:

3.45, 1857 votes
JVC LVT1148-010A User Manual
JVC LVT1148-010A User Guide
JVC LVT1148-010A Online Manual

Text of JVC LVT1148-010A User Guide:

  • JVC LVT1148-010A, Advanced operations 34 Repeating a desired part [A-B Repeat] You can repeat playback of a desired part by specifying the beginning (point A) and ending (point B). 7 During playback When using the A-B RPT button: 1 Press A-B RPT at the beginning of the part you want to repeat (point A). The repeat mode indicator “” appears on the display window. 2 Press A-B RPT again at the end of the part you want to repeat (point B). The repeat mode indicator on the display window changes to “” and A-B Repeat Playback starts. The selected part of the disc (between point A and B) is played repeatedly. To cancel Press A-B RPT during A-B Repeat Playback. When using the

  • JVC LVT1148-010A, 14 Operating external components with the remote control NOTE • Manufacturers’ codes are subject to change without notice. • Set the codes again after replacing the batteries of the remote control. 7 To set the manufacturer’s code You can operate a JVC TV without setting the manufacturer’s code. 1 Slide the remote control mode selector to TV. 2 Press and hold F TV. Keep the button pressed until step 4 is finished. 3 Press ENTER. 4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Pre

  • JVC LVT1148-010A, 36 Setting DVD preferences • You can change the language used in the setup menus. See “Menu description” below. Basic operation on the setup menus IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2Press DVD. 7 While stopped 1 Press SET UP. 2 Follow the instructions that appears on the TV screen. :Language menu (LANGUAGE) 7 MENU LANGUAGE Some DVDs have their own menus in multiple languages. • Select the initial language*. 7 AUDIO LANGUAGE Some DVDs have multiple audio languages. • S

  • JVC LVT1148-010A, Operating external components with the remote control 15 5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0, then 1. For a Sony product: Press 2, then 0. 6 Release F VCR/DBS. If there is more than one code listed for your brand, try each one until you enter the correct one. 7 Operation Aim the remote control at the DBS tuner or CATV converter. IMPORTANT Before using the remote control to operate a DBS tuner or CATV converter; 1 Set the remote control mode selector to VCR/DBS. 2Press DBS. The following buttons are avail

  • JVC LVT1148-010A, Connections 13 You can enjoy the sound of an analog component. NOTE • The signals input to the VIDEO VCR IN jack will be output only from the VIDEO OUT jack, not from the S-VIDEO OUT jack. You can enjoy the sound of a digital component. * DBS = Direct Broadcasting Satellite NOTE • Only digital audio signals can be input when selecting “DBS” as the source to play. (A pg. 17) When connecting a video component such as a DBS tuner, operate this system to listen to the sound. To avoid damaging the powered subwoofer, set the VOLTAGE SELECTOR switch to the v

  • JVC LVT1148-010A, Advanced operations 28 Locating a desired position by specifying the time 7 For DVD VIDEO/DVD AUDIO: During playback For VCD/SVCD: While stopped or during playback without PBC function For CD: During playback or while stopped 7 When specifying the elapsed playing time from the beginning of the disc Perform the following procedure while stopped. 7 When specifying the elapsed playing time from the beginning of the current title/track Perform the following procedure during playback. 1 Press ON SCREEN twice. The on-screen bar appears on the T

  • JVC LVT1148-010A, Description of parts and controls 7 Remote control Putting batteries in the remote control If the range or effectiveness of the remote control decreases, replace both batteries. CAUTION • Do not expose batteries to heat or flame. Operating the system from the remote control Aim the remote control directly to the front panel of the center unit. • Do not hide the remote sensor. OPEN/CLOSE TV/VIDEO DVD TOP MENU REC MENU ON SCREEN AUDIO MUTING FM/AM SUBTITLE TV VCR SURR. TV VOL CHANNEL AUDIO VOL TUNING F AUDIO VCR/DBS DBS FL DISP. AUDIO VCR/DBS TV TUNING FM MODEMEMORY ENTER TITLE/GROUP ANGLE VFP ZOOM PAG E REPEAT SETUP SLEEP S

  • Tuner operations 40 Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset 30 FM and 15 AM stations. 7 To preset the stations 1 Tune in the station you want to preset. • If you want to store the FM reception mode for an FM station, select the reception mode you want. See “Selecting the FM reception mode” below. Example: When the sy

  • JVC LVT1148-010A, 41 AV COMPU LINK remote control system The AV COMPU LINK remote control system allows you to operate JVC TVs and VCRs through the center unit. This system is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components via the video components terminals. To use this remote control system, you need to connect the video components you want to operate as follows. • Refer also to the manuals supplied with your TV and video components. Connecting a TV and VCR CAUTION Before connecting; • If you have already plugged your VCR, TV and the center unit into the AC outlets, unplug their AC power cords first.

  • Warnings, Cautions and Others G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below: 8 cm Wall or obstructions XV-THS8/ XV-THS5 3 cm 3 cm 15 cm XV-THS8/XV-THS5 10 cm Front No obstructions Wall or obstructions SP-PWS8/ SP-PWS5 20 cm 15 cm 15 cm Wa

  • Playback 23 7 During playback or while stopped 1 Press TITLE/ GROUP. “_ _” or “_” is shown in the title/group display area in the display window. Example: During DVD VIDEO playback 2 While the display window shows “_ _” or “_”, use number buttons (0-10, +10) to enter the desired title or group number. The system starts playback from the first chapter/tra

  • JVC LVT1148-010A, Connections 10 CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer. • DO NOT connect more than one speaker to one speaker terminal. Connecting the satellite (front, center, surround) speakers • Connect the silver cords to the black (r) terminals. • Connect the copper cords to the (q) terminals referring to the table below: Speaker cord (supplied) FRONT SPEAKERS (LEFT) White FRONT SPEAKERS (RIGHT) Red CENTER SPEAKER Green SURROUND SPEAKERS (LEFT) Blue SURROUND SPEAKERS (RIGHT) Gray Before connecting the speaker cords

  • JVC LVT1148-010A, Basic operations 17 On the remote control: Press one of the source selecting buttons (DVD, FM/AM, VCR or DBS). DVD: To play back a disc (DVD VIDEO, VCD etc.). (A pg. 20) FM/AM: To tune in an FM or AM station. (A pg. 39) Each time you press the button, the band alternates between FM and AM. VCR: To select the source from a component connected to the VCR IN jacks and AUDIO IN (VCR) jacks. (A pg. 13) DBS: To select the source from a component connected to the DIGITAL IN (DBS) jack. (A pg. 13) On the ce

  • JVC LVT1148-010A, Advanced operations 26 7 Contents of the on-screen bar during playback DVD VIDEO DVD AUDIO VCD SVCD CD MPEG4* * 7 – N are not available. A Shows disc type. B Shows current transfer rate (Megabits per second). C Shows current title (for DVD VIDEO) or group (for DVD AUDIO) number. D Shows current chapter number (for DVD VIDEO) or track number (for other type of discs). E Shows time information. See “Changing the time information” below. F Shows playback status. : appears during playback. / : appears during fast forward/reverse. / : appears during playback in forward slow-motion/ reverse slow-motion. : appears

  • JVC LVT1148-010A, Basic operations 19 NOTE • When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again. 7 While DVD is selected as the source and stopped 1 Take your position where you listen to the sound. 2 Press and hold SMART S.SETUP. “SETTING UP” flashes on the display window. 3 Press ENTER, press Cursor Y/5 to select the distance between the front speakers and the listening position, then press ENTER. 4 Press Cursor Y/5 to select START, then press ENTER. 5 Clap your hands over your head once. 6 Make sure th

  • JVC LVT1148-010A, Connections 11 CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer. • DO NOT connect more than one speaker to one speaker terminal. • When installing the satellite speakers on the wall; • Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect ins

  • JVC LVT1148-010A, Advanced operations 31 Selecting browsable still picture recorded on DVD AUDIO Most DVD AUDIOs include browsable still pictures (B.S.P.), which usually appear by turns automatically during playback according to the playback sequence. You can change the picture (turn the page) manually when the current group/track has selectable pictures (pages). 7 During playback and while the B.S.P. indicator lights up on the display window When using the PAGE button: Press PAGE repeatedly to select a desired still picture. Wh

  • JVC LVT1148-010A, Advanced operations 33 You can play titles or tracks on a disc in random order. 7 While stopped 1 Press PLAY MODE repeatedly until appears on the TV screen. 2 Press 3 (play button). To quit Random mode While stopped, press PLAY MODE repeatedly until both program window and disappear from the TV screen. You can also clear the Random mode by turning off the system. NOTE • The same title/track will not be played back more than once during Random Playback. Repeating the current selection 7 For DVD VIDEO: During playback For VCD/SVCD: During playback without PBC f

  • JVC LVT1148-010A, References 43 7 Center unit (XV-THS8/XV-THS5) Audio section Total Harmonic Distortion 0.02 % NOTE: This value is measured at System cord CONNECTOR for reference. Digital input* 1 : DIGITAL IN (DBS): –21 dBm to –15 dBm (OPTICAL) (660 nm E30 nm) * 1 Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz) Video section Video System: NTSC/PAL selectable Horizontal Resolution: 500 lines Signal-to-Noise Ratio: 64 dB Video output level Composite: 1.0 V(p-p)/75 C S-video-Y: 1.0 V(p-p)/75 C S-video-C: 0.286 V (0.3 V* 2 ) (p-p)/75 C Component-Y: 1.0 V(p-p)/75 C Component-P B/PR: 0.7 V(p-p

  • Advanced operations 30 When using the on-screen bar: 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3/2 to highlight . 3 Press ENTER. 4 Press Cursor Y/5 repeatedly to select the desired subtitle. 5 Press ENTER. 6 Press ON SCREEN. The on-screen bar disappears. NOTE • To clear the subtitle, press SUBTITLE. Each time you press

  • References 44 7 Satellite Speakers Front speakers (SP-THS5F) Speakers: Woofer: 8.0 cm Tweeter: 1.5 cm Bass-reflex, Magnetically Shielded Power Handling Capacity: 120 W Impedance: 4 C Frequency Range: 90 Hz to 20 kHz Dimensions (W M H M D): 106 mm M 139.5 mm M 102 mm Mass: 0.67 kg Surround speakers (SP-THS7S) Speakers: 8.0 cm Bass-reflex, Magnetically Shielded Power Hand

  • JVC LVT1148-010A, Playback 21 NOTE • (For JPEG) The system cannot accept operations even though you press any buttons before the entire picture appears on the TV screen. • If you do not want the on-screen guide icons to appear, see page 38. 7 Playback information on the display window DVD VIDEO Example: When a DVD VIDEO encoded with Dolby Digital 5.1ch is played DVD AUDIO VCD/SVCD/CD Example: When a CD is played back *1 VCD indication appears for VCD/SVCD. NOTE • When a VCD or SVCD with PBC function is played, the elaps

  • JVC LVT1148-010A, G-1 Warnings, Cautions and Others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! (XV-THS8/XV-THS5) Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The F button in any position does not disconnect the mains line. • When the system is on standby, the STANDBY lamp lights red. • When the system is turned on, the STANDBY lamp goes off. The power can be remote controlled. CAUTION (SP-PWS8/SP-PWS5) The power supply to the subwoofer is linked to the center unit. The POWER ON la

  • JVC LVT1148-010A, LVT1148-010A [US, UB, UG, A] English DVD DIGITAL CINEMA SYSTEM INSTRUCTIONS Consists of XV-THS8, SP-PWS8, SP-THS9F, SP-THS9C and SP-THS9S Consists of XV-THS5, SP-PWS5, SP-THS5F, SP-THS5C and SP-THS7S TH-S8S5[USUB].book Page 1 Friday, May 28, 2004 2:22 PM

Related Products and Documents (Home Theater System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Denon ADV-1000 Operating instructions manual denon/adv-1000-YHO.pdf 04 Sep 2022 95 4.82 Mb
2 Frigidaire PLHS237ZA Factory parts catalog frigidaire/plhs237za-5QN.pdf 28 Mar 2023 23
3 Visonic CLIP 4N Installation instructions visonic/clip-4n-M7N.pdf 02 Oct 2023 2
4 Freecom DATA RECOVERY SERVICE Datasheet freecom/data-recovery-service-78P.pdf 02 Nov 2022 1 1.8 Mb
5 JVC GET0471-001A Instruction manual jvc/get0471-001a-1U8.pdf 17 Oct 2023 60
6 Bose Auditioner Playback System III Operation & user’s manual bose/auditioner-playback-system-iii-U33.pdf 08 Mar 2023 10

Similar Resources:

  • Philips

    HTS2500

    (32 pages)
    1 - 1HTS2500/12/55/94/98/78/05© Copyright 2010 Philips Consumer Electronics B.V. Eindhoven, The NetherlandsAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system ortransmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwisewithout the prior permission of Philips.Published by RY_LYF_ …
  • HP

    Pavilion t700 - Desktop PC

    (1 pages)
    Technical Specifications Model t760i PN217AA Processor & Speed Intel® Pentium® 4(P)540 Processor – 3.2GHz/800HT LGA775 Chipset Intel® 915G Motherboard Grouper-GL8E (PTGD1-LA) RAM 256/3200 MB 400 DDR SDRAM Maximum 3 GB Sockets Four 184-pin DDR DIMMs Size 128, 256, 512 AND 1024 MB DDR DIMMs Free DIMM Sockets Three Pairs Required …
  • Sony

    BDV-N7100W Guide

    (8 pages)
    Do your movies justice with this powerful, yet simple Blu-ray Disc home theater system. Surround yourself with immersive, cinematic sound that brings the theater’s thrills and chills directly to your living room. Plus, easily connect your smartphone with one-touch Bluetooth® pairing to start streaming your music instantly1. With built-in Wi-Fi®, access …
  • Philips

    DCB2020 -

    (25 pages)
    DCB2020Register your product and get support atwww.philips.com/welcomeΕγχειρίδιο χρήσης 101Mode d’emploi 129Manuale utente 155Gebruiksaanwijzing 181User manual 3Brugervejledning 27Benutzerhandbuch 51Käyttöopas 77 …
  • Pioneer

    HTZ585DVD-AP

    (126 pages)
    Operating InstructionsHTZ585DVD-APDVD/CD Receiver | DVD/CDġ௦ԞᏣXV-DV585APSpeaker System |ġඵᖑᏣقಜS-DV585HTZ787DVDDVD/CD Receiver | DVD/CDġ௦ԞᏣXV-DV787Speaker System |ġඵᖑᏣقಜS-DV787TS-DV5SWHTZ787DVD-APDVD/CD Receiver | DVD/CDġ௦ԞᏣXV-DV787APSpeaker System |ġඵᖑᏣقಜS-DV787TS-DV5SWHTZ-FS30DVDDVD/CD Receiver | DVD/CDġ௦Ԟ …
  • Definitive Technology

    SuperCube I

    (4 pages)
    SuperCube I & SuperCube Reference The following will detail the amplifier removal process for Definitive Technology subwoofer models SuperCube I & SuperCube Reference. Some models may be Labeled Powerfield SuperCube X. The subwoofer should be unplugged from any receiver or power amp that it may be plugged into. Disconnect the speaker from AC power a …

Comments, Questions and Opinions: