JVC UX-EP25 Instructions Manual

Text of JVC UX-EP25 User Guide:

• 29 To remove the speaker grilles Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service.  General: Adjustments or settings are suddenly canceled before you fi nish. @ There is a time limit. Repeat the procedure again. Operations are disabled. @ The built-in microprocessor may malfunction due to exte

• JVC UX-EP25, 2 Introduction Thank you for purchasing the JVC Micro Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will fi nd all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer. Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. •

• JVC UX-EP25, 11 To tune in to a preset station Remote ONLY 1 Select a band (FM or AM). 2 Select a preset number for the station you store. • You can also use the PRESET 5/ 5 . Playable media and fi les This system can playback following types of media and fi les. Media Audio CD, CD-R/RW, USB mass storage class device File format MP3, WMA Audio CD CD-R CD-RW • This System may not playback some USB mass storage class devices and does not support DRM (Digital Rights Management). • This system may not playback some fi les even though their formats are listed above. • Caution for DualDisc playback The Non-DVD side of a

• JVC UX-EP25, 9 Daily Operations — Playback — 2 3 1 1 Turn on the power. The STANDBY lamp on the main unit turns off. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source. Playback automatically starts if the se- lected source is ready to start. • If you press USB MEMORY, iPod or USB/AUX/FM/AM, start playback source on the external component. 3 Adjust the volume. 4 Operate the target source as explained later. To turn off (stand by) the System STANDBY/ON The STANDBY lamp on the main unit lights up. • A small amount of power is al- w

• 17 PS (Program Service): The station name appears. “NO PS” appears if no signal is sent. PTY (Program Type): The broadcast program type appears. “NO PTY” appears if no signal is sent. RT (Radio Text): The text message sent by the station appears. “NO RT” appears if no signal is sent. Station Frequency: The frequency of the selected station appears on

• JVC UX-EP25, 2727 4 Set the volume. • “SET OK” appears on the display fol- lowed by the timer settings you have entered. 3 Turn off the System (on standby) if you have set the timer with the System turned on. STANDBY/ON Display is turned off. The STANDBY lamp blinks slowly until the setting time comes. To turn off the Timer after its setting is done Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days. 1 Select the Timer setting. 2 Turn off the Timer. The timer indicator turns off on the display

• JVC UX-EP25, 15 Resume Play for MP3/WMA If you press 7 while playing MP3/WMA, the number of the track where you have stopped playback will be memorized by the unit. By pressing CD 6 or USB MEMORY 6, you can start playback again from the beginning of the same track. To activate/cancel resume play Remote ONLY memo • Pressing OPEN/CLOSE (for Disc), or disconnecting the USB mass storage class device will erase the track number for resume play. • To play back from the fi rst track while resume play is activated, press 7 twice during playback. Playing Back from the PC This System is equipp

• JVC UX-EP25, 26 Setting the Timer Remote ONLY Using Daily Timer, you can wake up with music, etc. • To exit from the timer setting, press CLOCK/ TIMER repeatedly until the current status (normal operation) is displayed. • To correct a misentry during the process, press CANCEL. You can return to the previous step. How Daily Timer actually works Once the Daily Timer has been set, the timer indicator are lit on the display. Daily Timer is activated at the same time everyday until the timer is turned off manually

• JVC UX-EP25, 20 Adjusting the Volume You can adjust the volume level from level 0 (VOLUME-MIN) to level 30 (VOLUME-MAX).  To drop the volume in a moment Remote ONLY To restore the volume, press again, or adjust the volume level. Adjusting the Sound Remote ONLY  To reinforce the bass sound — AHB PRO Remote ONLY You can reinforce the bass sound to maintain rich, full bass at low volume. To adjust the tone — BASS/TREBLE Remote ONLY You can adjust the bass and treble level from 0 to +5/-5.  To adjust the bass Daily Op

• JVC UX-EP25, 13 When disconnecting the iPod, make sure that the System is turned off. To remove the connector from your iPod, squeeze the buttons on the sides and pull. To playback sounds on the iPod To select a track Search... Press and hold 4 or ¢. OFF... Press and hold 6. Playing Back from the USB mass stor- age class device This System is equipped with a USB MEMORY terminal on the front panel. You can connect a USB mass storage class device such as a USB fl ash memory device, Digital Audio Player (DAP), etc. to this System.This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA. • Remember you cannot send any data to your USB mass

• 7 To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna Make sure to connect the wire correctly. • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl. • Make sure the antenna conductors do not touch any other termina

• 22 Turning Off the Power Automatically Remote ONLY To turn off the System after playback is over — Auto Standby This function works only when the source is CD. When Auto Standby is in use, the A.STANDBY indicator lights on the display. When the disc playback stops, the A.STANDBY indicator starts fl ashing. If no operation is done for about 3 minutes while the indicator is �

• 5 Step 3 Hook Up If you need more detailed information, see page 7. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary. Turn the power off to all components before connections. For better FM/AM reception Outdoor FM antenna (not supplied) AM

• JVC UX-EP25, 28 Learning More about This System Daily Operations—Playback (see pages 9 to 19) Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased. • When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again. Playing Back a Disc/USB mass storage class device: • This System cannot play “packet write” discs. • For MP3/WMA

• JVC UX-EP25, 31 Parts Index Refer to the pages to see how to use the buttons and controls. Remote control Main unit 9 11, 15 9-15 10-14 9, 20, 21 9, 27 1313 Remote sensor 8169 10-12, 23 10, 21 10-14, 21, 23, 24, 26, 27 10, 11, 13, 15, 16, 23, 24 23, 24 25 22 11, 15 20 9, 27 24, 26, 27 10, 15, 21, 26, 27 21, 26, 27 22 11 11-13, 23, 24 24 10 11 14 20 21 9, 20, 21 20, 21 12 16-19

• JVC UX-EP25, 21  To adjust the treble Changing the Display Brightness — DIMMER Remote ONLY You can dim the display window. Setting the Clock Remote ONLY Without setting the built-in clock, you cannot use the Daily Timer and sleep Timer (see page 26). • To exit from the clock setting, press CLOCK/ TIMER as required. • To go back to the previous step, press CANCEL. 1 Activate the clock setting mode. • If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see

• JVC UX-EP25, 23 Programming the Playing Order — Pro- gram Play Remote ONLY You can arrange the playing order of the tracks (up to 32) before you start playback. • You can repeat all the programmed tracks by pressing REPEAT. 1 Before starting playback, press PRO- GRAM. 2 Select tracks you want for Program Play. Select the group fi rst, then the track. Examples: To select track number 5, press 5. To select track number 15, press > = 10 J 1 J 5. To select track number 20, press > = 10 J 2 J 0. To select track number 125 (for MP3/WMA only), press > = 1 0 J 1 J 2 J 5. 3 Repeat steps 2 to program the other

• JVC UX-EP25, 25 Playing Repeatedly — Repeat Play Remote ONLY You can repeat playback. CD MP3/WMA (Track mode) Repeats the current track. MP3/WMA (Group mode) Repeats all the tracks in the current group (for MP3/WMA playback mode in “GROUP” only). ALL CD MP3/WMA Repeats all the tracks. Canceld (No indication) ALL

• JVC UX-EP25, 24 To check the programmed contents While the PRGM indicator is shown on the display and before play back... To modify the program While the PRGM indicator is shown on the display and before play back... To exit from Program Play While the PRGM indicator is shown on the display... To erase the entire program While the PRGM indicator is shown on the display and before play back... Press stop button or open CD door. Playing at Random — Random Play Remote ONLY You can play back all the tracks on the d

• JVC UX-EP25, 4 Getting Started Step 1: Unpack the package and check the accessories. Step 2: Prepare the remote control. Step 3: Hook up the components such as AM/FM antennas, speakers, etc. (see pages 5 to 7). Finally plug the AC power cord. Now you can operate the System. Step 1: Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Speaker cords (2) • Remote control (1) • Batteries (2) • iPod connection cabl

• JVC UX-EP25, 12 To locate a particular portion While playing a disc, press and hold until the portion you want is reached. To locate a track directly and start play Remote ONLY Examples: To select track number 5, press 5. To select track number 15, press > = 10 J 1 J 5. To select track number 20, press > = 10 J 2 J 0. To select track number 125 (for MP3/WMA only), press > = 1 0 J 1 J 2 J 5. Playing back from iPod This system is equipped with an iPod ® terminal on the front panel. You can connect your iPod to this terminal and enjoy the sound from your iPod. • Remember you cannot send any data to your iPod from this system. ✎ IMPORTANT • The iPod battery

• JVC UX-EP25, 1 Contents Introduction ...............................................................................................................................2 Precautions ............................................................................................................................................................2 How to Read This Manual ...................................................................................................................................3 Getting Started ..........................................................................................................................4 Step 1: Unpack ......................................

• JVC UX-EP25, 10 To display the clock indication Remote ONLY While the System is turned on... • Press the button again, to return to the source information. Listening to the Radio To select the band (FM or AM) To tune in to a station While FM or AM is selected... Frequency starts changing on the display. When a station (frequency) with suffi cient signal strength is tuned in, the frequency stops changing. • When you repeatedly press the button, the frequency changes step by step. To stop searching manually, press either button. If the received FM station is hard to listen Remote ONLY MONO : Reception w

• JVC UX-EP25, 30 Maintenance To get the best performance of the System, keep your discs, and mechanism clean. Handling discs • When removing the disc from its case, hold it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. • Put the disc back in its case after use to prevent warping. • Be careful not to scratch the surface of the disc. • Avoid exposure to direct sunlight, temperature extremes, and moisture.  To clean the disc: Wipe the disc with a soft cloth in a

More Instructions:

	JVC UX-EP25 Instructions manual 12-10-2023 35	DOWNLOAD
	JVC UX-EP25 Instructions manual 22-05-2023 35	DOWNLOAD
	JVC UX-EP25 Instructions manual 29-01-2024 39	DOWNLOAD

Related Products and Documents (Micro Music System):

Comparable Devices:

Similar Resources:

• Philips BTM2056 (2 pages) ENGLISHNote for mountingTo secure the mounting on wall, concrete wall is required.Use screws to mount the main unit on the wall1. Use this sheet as a template. Mark the position where you want to hang the unit on the wall (as shown above) and then drill two 6mm diameter holes.2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Le …

• Philips DCM276 (3 pages) PhilipsMicro Hi-Fi SystemDCM276Enjoy iPod music in superb soundPlayback your iPod music in superb sound while recharging it with the Philips Micro system DCM276. The flat, compact design is also wall-mountable to complement any interior. USB direct for added playback options.Enjoy your music from multiple sources• Play and charge your iPod• Play CD, CD …

• Philips DCB293/05 (4 pages) DCB293www.philips.com/welcomeQuick Start GuideUser ManualPRESET/ALBUMPROG/ CLOCK SET SLEEP/TIMER DISPLAYMENURDSDSC DBB USBTUNERCDVOLMODE/SCAN3456789102DABOPEN/CLOSEMP3 LINKENTER …

• Philips DCM713/93 (24 pages) DCM713/93Register your product and get support at EN User manual 1 ZH-CN ၬ੍੗Х 22Dock for iPhone/ iPod Component micro Hi-Fi systemDCM713_93.indb Sec3:1 2010-9-9 14:36:31 …

• Samsung MM-DA25 (34 pages) AH68-02050KPERSONAL MICRO COMPONENT SYSTEMuser manualMM-DA25imagine the possibilitiesThank you for purchasing a Samsung product.To receive more complete service, please register your product at www.samsung.com/global/registerMM-DA25(1p~28p)-GB-TAPE-4.18 4/18/08 8:59 Page 2 …

• Philips MCD906/93 (4 pages) 312MCD 906Quick Start GuideWhat’s in the Box?You should find these items upon opening the box.1Quick Start Guide2User ManualQuick start guideUser manualRemote control with twoAAA batteriesFM antennaComposite Video CableMCD906 QSG_Eng-93 2010.3.31, 11:041 …

Comments, Questions and Opinions: