Manualios.com

JVC 0200JTMMDWJSCEN Instructions Manual

JVC 0200JTMMDWJSCEN Manual Online:

4.85, 1797 votes
JVC 0200JTMMDWJSCEN User Manual
JVC 0200JTMMDWJSCEN User Guide
JVC 0200JTMMDWJSCEN Online Manual

Text of JVC 0200JTMMDWJSCEN User Guide:

  • JVC 0200JTMMDWJSCEN, 9 English • If you try to program a 33rd step “MEMORY FULL” will appear in the display window, and your entry is ignored. • The total playback time of programed tracks exceeds 99’59” “– – : – –” will appear in the display window. 6 Press 6 (play/pause) button on the MD recorder. The programed tracks are played back in the order you have set. 7 Press 7 (stop) button to quit Program play. • When Program play finished, MD recorder auto- matically stops. To check the program contents Before playing back the MD, you can check the program contents by using 4

  • JVC 0200JTMMDWJSCEN, 15 English • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again. Each time you press DISPLAY/CHARA. button, information switches between the remaining time for the recording and the elapsed time with the track number of the MD alternately. 6 Press 7 (stop) buttons both on the MD recorder and the cassette deck to quit recording as required. “WRITING” appears in the display window, and you can remove the MD and the tape by pressing 0 (eject) bu

  • JVC 0200JTMMDWJSCEN, 24 English You can assign a name to each MD and to each track. Once a title is assigned, it is displayed in later playback for confirmation. Each title can be composed of up to 64 characters, and can be input using alphabetic characters (uppercase and lowercase), symbols and numerals. • To operate with the buttons behind the sliding panel, press OPEN/CLOSE button on AX-UXG6 to open the sliding panel first. • To operate with the remote control, press MD 6 (play/pause) button first and 7 (stop) button successively. • To quit operation

  • Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The JVC service and engineering organization stands behind our products. NATIONAL HEADQUARTERS JVC SERVICE & ENGINEERIN

  • JVC 0200JTMMDWJSCEN, Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm (3 15 /16 in.) or more. Attention: Aération correcte Pour prévenir tout risque de décharge électrique ou d’incendie et éviter toute détérioration, installez l’appareil

  • JVC 0200JTMMDWJSCEN, 21 English • If “TRACK PROTECTED” appears, the selected track has been write-protected by another component. You cannot edit such a protected track. To cancel the editing, press TITLE/EDIT button. 5 Press SET button when you find the point where you want to divide the track. The MD recorder repeats the selected point — a portion of three seconds length following the dividing point. • If you have selected a wrong track number, press CANCEL button then select the correct track. 6 Rotate MULTI JOG dial ( < / > button also available) to precisely adjust the dividing point. • Y

  • JVC 0200JTMMDWJSCEN, 27 English Handling MDs MD Handling Precautions To maintain high quality audio for a long period Since the disc is accommodated inside a cartridge, it can be handled easily without caring about dust and dirt. However, to maintain the high audio quality for an extended period, use care in the following points. Installation location Do not install the MD in following places. • In a place subject to direct sunlight or where the temperature rises, for example in a closed automobile. The disc may be warped and unusable in these places. • In a bathroom or where the humidity is high. The disc may be rusted in these places. • On a beach

  • JVC 0200JTMMDWJSCEN, 7 English • Make sure to insert an MD in the direction of arrow mark on the MD cartridge. If you cannot insert an MD You have inserted an MD incorrectly and taken it off by force. MD loading slot rejects MD insertion. If this occurs, wait for one minute at most with the MD recorder turned on until a mechanical sound comes out of the MD mechanism. The following information appears in the display window of FS-G6 as follows: Total track number Total playback time Playing Back an MD COMPACT COMPONENT SYSTEM FS-G6 MOS - FET OPEN/CLOSE AUX VOLUMEMULTI FM/AM STANDBY/ON JOG MULTI JOG OPEN/CLOSE Play mode indicators POWER VOLUME MD ENTER AUTO PRESET PLAY MODE FM MODE

  • JVC 0200JTMMDWJSCEN, 6 English Connecting Another Digital Audio Equipment For digital audio recording onto an MD, XM-G6 unit connected to FS-G6 system has one more optical digital terminal (OPTICAL DIGITAL IN for AUX), prepared for an external digital audio output equipment. When connecting another digital equipment Make sure to turn off FS-G6 system with XM-G6 unit and unplug the AC power cord. Leave it until all the connection completes. DO NOT place an external equipment onto (or under) FS-G6 system and XM-G6 unit. Damage or malfunction may result from heat generating portion of units. 1 Turn off FS-G6 system and unplug the AC power cord from the wall

  • 4 English • You can also use the buttons on the remote control if they have the same or similar names (or marks) as those on the units. If operation using the remote control is different from that using each unit, it is then explained. Concerning with the remote control Refer to the Instructions supplied with FS-G6. Remote Control (belongs to FS-G6)Front Panels MiniDisc Recorder

  • JVC 0200JTMMDWJSCEN, 12 English 2 Press FM/AM button. 3 Tune into a desired station using MULTI JOG dial or 4 / ¢ button. Refer to FS-G6’s Instructions for details (pages 14 – 15). 4 Press REC PAUSE button on the MD recorder. The REC indicator on the MD recorder lights red. Information in the display window changes as follows: Remaining time for recording REC REC PAUSE SAMPLING RATE CONVERTER MD IN lamp REC indicator 0 (eject) 6 (play/pause) 7 (stop) REC PAUSE MD loading slot COMPACTCOMPONENT SYSTEM FS-G6 MOS - FET OPEN/CLOSE AUX VOLUMEMULTI FM/AM S

  • 14 English Recording a CD — Synchronized Recording This is the easiest way of CD recording. Setting the recording mode, you can start playing back an entire CD and recording it onto an MD simultaneously. 1 Repeat the steps 1 and 2 in previous section. 2 Press REC MODE button behind the sliding panel to select “SYNC REC > MD.” Each time you press the button, the recording mode changes as

  • JVC 0200JTMMDWJSCEN, 23 English 7 Press ENTER button to finish your selection of tracks to erase. • If you want to cancel the editing, press CANCEL button. 8 Press ENTER button again. 9 Press 0 (eject) button to eject the MD. “WRITING” appears while the editing you have made is being recorded on the MD. ALL ERASE Function This function allows you to erase all the tracks on an MD. • To stop any time during editing process, press TITLE/ EDIT button. 1 Insert an MD you want to edit into the MD loading slot. The MD IN lamp lights orange. 2 Press TITLE/EDIT b

  • JVC 0200JTMMDWJSCEN, 25 English 3 Press SET button to select the track number. Rotate MULTI JOG dial to select desired track number (or press < / > button on the remote control). 4 Press SET button again to enter the character entry mode. The character sets present 11 characters alphabetically at a time in the upper portion of the display window. You can select a character from character sets in the upper portion of the display window, and enter it into the character entry box in the lower portion. 5 Press DISPLAY/CHARA. button repeatedly to select the character sets as

  • 17 English Recording the External Equipment When recording from the external equipment, you can select one of the two recording methods — Manual Recording and Sound Synchronized Recording. • Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the external equipment respectively. • Soun

  • JVC 0200JTMMDWJSCEN, 26 English Available Characters Uppercase and Symbols (blank) Lowercase and Symbols (blank) Numerals • During Synchronized Recording: You can assign the disc title, and 15 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 16th track title or more, they are ignored. Changing the Title You can make a correction or change the title. 1 Follow steps 1 to 4 of pages 24 to 25. 2 Rotate MULTI JOG dial or press < / > button to select the character you want to cor

  • JVC 0200JTMMDWJSCEN, 20 English REC REC PAUSE SAMPLING RATE CONVERTER MD IN lamp MD loadin g slot 0 (eject) COMPACT COMPONENT SYSTEM FS-G6 MOS - FET OPEN/CLOSE AUX VOLUMEMULTI FM/AM STANDBY/ON JOG OPEN/CLOSE MULTI JOG POWER DISPLAY /CHARA. PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMERCANCEL ENTER SET SET TITLE/EDIT CANCEL ENTER 4 ¢ VOLUME MD ENTER AUTO PRESET PLAY MODE FM MODE CANCEL DISPLAY /CHARA. BASS SLEEP PANEL OPEN/CLOSE REMOTE CONTROL RM-SFSG6J TAPE FM/AM SET AUX TITTLE/EDIT REPEAT TREBLE DIMMER CLOCK/TIMER CD  ACTIVE BASS EX.  TITLE/EDIT SET CANCEL ENTER UP DOWN >< < / > POWER PANEL OPEN/CLOSE • To operate with the buttons behind the slid

  • JVC 0200JTMMDWJSCEN, 5 English When connecting the XM-G6 MD recorder Make sure to turn off FS-G6 and unplug the AC power cord. Leave it until all the connections complete. DO NOT place XM-G6 unit or any other equipment onto AX-UXG6 stereo amplifier unit. Damage or malfunction may result from heat generating portion of AX-UXG6. 1 Turn off FS-G6 system and unplug the AC power cord from the wall outlet. 2 Place the FS-G6’s units onto the XM-G6 unit. For example as follows, from top to bottom: AX-UXG6, XT-UXG6, TD-UXG6, finally

  • JVC 0200JTMMDWJSCEN, 13 English 5 Press 6 (play/pause) button on the MD recorder to start recording. The REC indicator remains lit, and recording starts. • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again. 6 Press 7 (stop) button to stop recording as required. Information in the display window changes as follows: You can remove the MD by pressing 0 (eject) button. Using

  • JVC 0200JTMMDWJSCEN, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a

  • 16 English Synchronized recording an MD onto a tape 1 Insert an MD to be played-back into the loading slot, and load a recordable tape. The MD IN lamp lights orange. 2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control, then press 7 (stop) button immediately to prepare playing back the MD. 3 Press REC MODE button behind the sliding panel

  • JVC 0200JTMMDWJSCEN, 11 English Things to Know Before You Start Recording • It should be noted that it may be unlawful to pre-recorded tapes, records, or discs without the consent of the owner of copy right in the sound or video recording, broadcast or cable program and in any literary, dramatic, or artistic embodied therein. • The sampling frequency rate converter built in the MD recorder allows you to record a digital source if its sampling frequency is 32 kHz, 44.1 kHz, or 48 kHz. If no source equipment is connected to the AUX terminal or if the sampling frequency of the connected equipment is not 32 kHz, 44.1 kHz, or 48 kHz, “DIGITAL UNLOCK” appears in the display wi

  • JVC 0200JTMMDWJSCEN, For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0378-001A [J] XM-G6 MINIDISC RECORDER ENREGISTREUR MINIDISC REC REC PAUSE SAMPLING RATE CONVERTER MINIDISC RECORDER XM-G6 INSTRUCTIONS MANUEL D'INSTRUCTIONS XM-G6[J].cover 99.11.26, 20:051

  • JVC 0200JTMMDWJSCEN, 8 English If the MD or each track has a title The disc title and track titles will be shown at the lower portion of the display window (Title longer than 11 characters scrolls to show the entire title). DO NOT insert any foreign matters. 2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. Each track of the MD starts playing back, and playback information appears in the display window as follows: Current track number Elapsed playing time • To stop playing back for a moment, press 6 (play/pause) button on the MD recorder. The playback time starts blinking in the display window. • To resume pl

  • JVC 0200JTMMDWJSCEN, 10 English Repeating Tracks — Repeat Play You can have the entire disc, the programed tracks, or the individual track repeat as many times as you like. 1 Insert an MD. If the current playing source is not the MD, press 6 (play/pause) button on the MD recorder, then 7 (stop) button before going to the next step. 2 Press REPEAT button on the remote control repeatedly to set the repeat play mode. • Each time you press the button, repeat mode indicators light in the display window, and repeat playbac

  • JVC 0200JTMMDWJSCEN, 18 English Recording the External Equipment — Sound Synchro- nized Recording Setting the recording mode, you can start playing back the external equipment and recording from it onto an MD simultaneously. First of all, make sure the proper cable connections between XM-G6 MD recorder and external equipment (see also page 6 in this manual, and refer to FS-G6’s Instructions page 9). 1 Insert a recordable MD. The MD IN lamp lights orange. 2 Press AUX button to select either analog source or digital source according to the external equipment. Each time you press AUX button

  • JVC 0200JTMMDWJSCEN, 30 English MD Messages Message BLANK DISC CANNOT JOIN DIGITAL IN UNLOCK DISC ERROR DISC FULL DISC PROTECTED EMERGENCY STOP LOAD ERROR MD NO DISC NON-AUDIO CANNOT COPY PLAYBACK DISC SCMS CANNOT COPY TRACK PROTECTED Signification The disc is blank. You are trying to join tracks which cannot be joined. There is no digital device connected to the DIGITAL IN terminals. There is a problem with this MD. There is no more space on the MD or there are over 254 tracks. The MD is write-protected. A malfunction has occurred during the recording. MD is not inserted correctly. There is no MD. You are trying to copy a non-a

  • 3 English REC PAUSE SAMPLING RATE CONVERTER 1 4 5 6 7 2 3 REC Location of the Buttons and Controls XM-G6 MiniDisc Recorder Buttons behind the Sliding Panel Become familiar with the buttons and controls on the unit. DISPLAY /CHARA. PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMERCANCEL ENTER SET 8 9 p q w e r ty MOS - FET STANDBY/ON FM/AM AUX OPEN/CLOSE VOLUME COMPACT COM

Related Products and Documents (MiniDisc Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 CellarCool Ultimate 3300 Owner's manual cellarcool/ultimate-3300-M9J.pdf 16 Jan 2024 34
2 Kicker COMPVT65 Owner's manual kicker/compvt65-5NW.pdf 16 Oct 2023 11
3 invotel SX8800-4L Operation & user’s manual invotel/sx8800-4l-V8V.pdf 05 Jul 2023 8
4 Faria IS0246 Owner's manual faria/is0246-J1E.pdf 25 Mar 2024 6 1.61 Mb
5 thomann D-SEED Operation & user’s manual thomann/d-seed-288.pdf 17 Oct 2023 24
6 Dodge 2010 Caliber Owner's manual dodge/2010-caliber-Z3J.pdf 11 May 2023 470

Similar Resources:

  • Onkyo

    MD-101A

    (39 pages)
    MD-101ASERVICE MANUALMINIDISC RECORDERSilver modelsMODEL MD-101A120V AC, 60Hz220-230V AC, 50/60HzMDTMGT, MGRRef. No. 3703112001RC-475MDSTANDBY/ONEJECTCONTINUEPLAY MODERANDOM MEMORYREPEAT A-B A.SPACE M.SCANZ.,)CLEARENTER!?/(RECNAMESCROLL DISPLAYABCDEFGHI JKLMNOPQRSTUVWXYREMOTE CONTROLLER RC-475MD611712172210152025>2512345813182391419241621MINIDISC RECOR …
  • Aiwa

    AM-HX50

    (32 pages)
    BASIC MD MECHANISM : ZZG-5 AMINIDISC PLAYERAM-HX50AM-HX55S/M Code No. 09-999-335-5R2AHK1(S)AHK1(L,W)SERVICE MANUALREVISIONDATAThis Service Manual is the “Revision Publishing” and replaces “Simple Manual”(S/M Code No.09-999-335-5T2). …
  • Grimm Audio

    MU1

    (29 pages)
    MU1$Software$Manual,$to$be$read$next$to$the$Hardware$Manual!"#$%#&'#$(&)*+%&,$-.$"&/#01'#&12#'$3-4&)*#&.-+)5!"#$%#&'(#)$*)#+,"-$*./0/.1 …
  • Sony

    MDS-JA333ES - Md Player

    (95 pages)
    SERVICE MANUALMINIDISC DECK— Continued on next page —SPECIFICATIONSUS ModelCanadian ModelAEP ModelUK ModelModel Name Using Similar Mechanism MDS-JA555ESMD Mechanism Type MDM-6JBase Unit Type MBU-5JOptical Pick-up Type KMS-260B/J1NMDS-JA333ESU.S. and foreign patents licensed from Dolby LaboratoriesLicensing Corporation.Photo : GOLDSystem MiniDisc digital …
  • Technics

    SJ-HD501

    (65 pages)
    ORDER No.AD9907180C2Mini Disc DeckSJ-HD501Mechanism unit: MR3A (RAJ3402) Mechanism SeriesColour(N)...................Gold TypeAreasEG...................Europe.EB...................Great Britain.This product is option for systems of SC-HD301 andSC-HD501.SPECIFICATIONS1 …
  • Pioneer

    CDJ-400 - Cd/Media Player

    (1 pages)
    CDJ-400 Specifications Model Name CDJ-400 Disc Type AUDIO CD, CD-R / RW & MP3 CD-ROM (MP3 files) Compatible Media USB memory (FAT32 format, MP3 file) Frequency Response 4 Hz-20 kHz Signal-to-Noise Ratio 115 dB or more (JEITA) Harmonic Distortion 0.006% (JEITA) Output Terminals AUDIO OUT (RCA), DIGITAL OUT (COAXIAL) Other Terminals CONTROL (φ3.5 …

Comments, Questions and Opinions: