Manualios.com

JVC XM-G6 Instructions Manual

JVC XM-G6 Manual Online:

3.45, 2862 votes
JVC XM-G6 User Manual
JVC XM-G6 User Guide
JVC XM-G6 Online Manual

Text of JVC XM-G6 User Guide:

  • JVC XM-G6, 4 • You can also use the buttons on the remote control if they have the same or similar names (or marks) as those on the units. If operation using the remote control is different from that using each unit, it is then explained. Concerning with the remote control Refer to the Instructions supplied with UX-G6R. Remote Control (belongs to UX-G6R)Front Panels MiniDisc Recorder XM-G6 1 MD IN lamp (7) 2 MD loading slot (7) 3 REC PAUSE button (12) 4 REC indicator (12) 5 0 (eject) button (8) 6 6 (play/pause) button (8) 7 7 (stop) button (8) Stereo Amplifier AX-UXG6 1 button and STANDBY/ON lamp 2 MULTI JOG dial 3 FM/AM button (12

  • JVC XM-G6, 6 Connecting Another Digital Audio Equipment For digital audio recording onto an MD, XM-G6 unit connected to UX-G6R system has one more optical digital terminal (OPTICAL DIGITAL IN for AUX), prepared for an external digital audio output equipment. When connecting another digital equipment Make sure to turn off UX-G6R system with XM-G6 unit and unplug the AC power cord. Leave it until all the connection completes. DO NOT place an external equipment onto (or under) UX-G6R system and XM-G6 unit. Damage or ma

  • JVC XM-G6, 22 MOVE Function This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like. • To quit any time during editing process, press TITLE/ EDIT button. 1 Insert an MD you want to edit into the MD loading slot. The MD IN lamp lights orange. 2 Press TITLE/EDIT button until “MOVE?” appears in the display window. 3 Press SET button. 4 Rotate MULTI JOG dial to select the track you want to move (< / > button also available). 5 Press SET b

  • JVC XM-G6, 15 • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again. Each time you press DISPLAY/CHARA. button, information switches between the remaining time for the recording and the elapsed time with the track number of the MD alternately. 6 Press 7 (stop) buttons both on the MD recorder and the cassette deck to quit recording as required. “WRITING” appears in the display window, and you can remove the

  • JVC XM-G6, 26 Available Characters Uppercase and Symbols (blank) Lowercase and Symbols (blank) Numerals • During Synchronized Recording: You can assign the disc title, and 15 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 16th track title or more, they are ignored. Changing the Title You can make a correction or change the title. 1 Follow steps 1 to 4 of pages 24 to 25. 2 Rotate MULTI JOG dial or press < / > button to select the character you want to co

  • 24 You can assign a name to each MD and to each track. Once a title is assigned, it is displayed in later playback for confirmation. Each title can be composed of up to 64 characters, and can be input using alphabetic characters (uppercase and lowercase), symbols and numerals. • To operate with the buttons behind the sliding panel, press OPEN/CLOSE button on AX-UXG6 to open th

  • 19 Introducing MD Editing Functions A recorded MD can be edited in many ways. The MD editing functions include dividing, joining, moving, erasing single tracks, erasing the entire disc, and more than one of them can be combined as required. Dividing a track (DIVIDE) : Page 20 This function divides a track by adding a track marking(s) in the desired point(s) in the

  • JVC XM-G6, 14 Recording a CD — Synchronized Recording This is the easiest way of CD recording. Setting the recording mode, you can start playing back an entire CD and recording it onto an MD simultaneously. 1 Repeat the steps 1 and 2 in previous section. 2 Press REC MODE button behind the sliding panel to select “SYNC REC > MD.” Each time you press the button, the recording mode changes as follows: 3 Press SET button to start recording. Recording starts automatically, and information change in the display window as follows: Each time you press DISPLAY/CHARA. button, information switches between the remaining time and elapsed time with the curren

  • JVC XM-G6, 29 Sound Skip Guard Memory The biggest weakness of discs is their susceptibility to vibration. The “Sound Skip Guard Memory” has been developed to cope with this weakness. With this function, a few seconds of signals read by the optical read head from the disc are first stored in memory before being reproduced as audio signals. Thus, even when vibration or shock interrupts signals being read, these stored signals can continue to reproduce sounds for the few seconds. Thus, the user will enjoy uninterrupted music. D I G I T A L ABCDEFG D I G I T A L OK NO Serial Copy Management System (SCMS) The MD recorder integrated to this unit uses the Serial Copy Manage

  • JVC XM-G6, 9 • If you try to program a 33rd step “MEMORY FULL” will appear in the display window, and your entry is ignored. • The total playback time of programed tracks exceeds 99’59” “– – : – –” will appear in the display window. 6 Press 6 (play/pause) button on the MD recorder. The programed tracks are played back in the order you have set. 7 Press 7 (stop) button to quit Program play. • When Program play finished, MD recorder auto- matically stops. To check the program contents Before playing back the MD, you can check the program c

  • JVC XM-G6, 18 Recording the External Equipment — Sound Synchro- nized Recording Setting the recording mode, you can start playing back the external equipment and recording from it onto an MD simultaneously. First of all, make sure the proper cable connections between XM-G6 MD recorder and external equipment (see also page 6 in this manual, and refer to UX-G6R’s Instructions page 9). 1 Insert a recordable MD. The MD IN lamp lights orange. 2 Press AUX button to select either analog source or digital source according to the external equipment. Each time you press AUX button, AUX mode changes between “AUX” and “AUX DIGITAL” alternately. 3 Press REC MODE button to select recording

  • JVC XM-G6, 3 REC PAUSE SAMPLING RATE CONVERTER 1 4 5 6 7 2 3 REC Location of the Buttons and Controls XM-G6 MiniDisc Recorder Buttons behind the Sliding Panel Become familiar with the buttons and controls on the unit. DISPLAY /CHARA. PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMERCANCEL ENTER SET 8 9 p q w e r ty MOS - FET STANDBY/ON FM/AM AUX OPEN/CLOSE VOLUME MICRO COMPONENT SYSTEM UX-G6R 4 ¢ AX-UXG6 Stereo Amplifier (belongs to UX-G6R) MICRO COMPONENT SYSTEM UX-G6R MOS - FET OPEN/CLOSE AUX VOLUMEMULTI FM/AM STANDBY/ON JOG 1 4 5 2 3 6 7 ( When pressing OPEN/CLOS

  • JVC XM-G6, 10 Repeating Tracks — Repeat Play You can have the entire disc, the programed tracks, or the individual track repeat as many times as you like. 1 Insert an MD. If the current playing source is not the MD, press 6 (play/pause) button on the MD recorder, then 7 (stop) button before going to the next step. 2 Press REPEAT button on the remote control repeatedly to set the repeat play mode. • Each time you press the button, repeat mode indicators light in the display window, and repeat playback mode changes as follows: : Repeats one track on the MD or in a program. : Repeats all the tracks on the MD or a program. 3 Press 7 (stop) b

  • JVC XM-G6, 8 If the MD or each track has a title The disc title and track titles will be shown at the lower portion of the display window (Title longer than 11 characters scrolls to show the entire title). • DO NOT insert any foreign matters. 2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. Each track of the MD starts playing back, and playback information appears in the display window as follows: Current track number Elapsed playing time • To stop playing back for a moment, press 6 (play/pause) button on the MD recorder. The playb

  • JVC XM-G6, 11 Things to Know Before You Start Recording • It should be noted that it may be unlawful to pre-recorded tapes, records, or discs without the consent of the owner of copy right in the sound or video recording, broadcast or cable program and in any literary, dramatic, or artistic embodied therein. • The sampling frequency rate converter built in the MD recorder allows you to record a digital source if its sampling frequency is 32 kHz, 44.1 kHz, or 48 kHz. If no source equipment is connected to the AUX terminal or if the sampling frequency of the connected equipment is not 32 kHz, 44.1 kHz, or 48 kHz, “DIGITAL UNLOCK” appears in the display window (no r

  • JVC XM-G6, 32 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom No sound is heard. Unable to record on an MD. Unable to operate the remote control. Loaded MD cannot be ejected. Operations are disabled. Possible Cause • Connections are incorrect, or loose. • You are using a prerecorded MD. • The MD is write-protected. • The path between the remote control and the remote sensor on the unit is blocked. • The batteries have lost their charge

  • JVC XM-G6, 7 • Make sure to insert an MD in the direction of arrow mark on the MD cartridge. If you cannot insert an MD You have inserted an MD incorrectly and taken it off by force. MD loading slot rejects MD insertion. If this occurs, wait for one minute at most with the MD recorder turned on until a mechanical sound comes out of the MD mechanism. The following information appears in the display window of UX-G6R as follows: Total track number Total playback time Playing Back an MD MICRO COMPONENT SYSTEM UX-G6R MOS - FET OPEN/CLOSE AUX VOLUMEMULTI FM/AM STANDBY/ON JOG MULTI JOG OPEN/CLOSE Play mode indicators VOLUME MD ENTERPTY/EON AUTO PRESET PLAY MODE FM MODE CANCEL DISPLAY /CHARA. BASS

  • 13 5 Press 6 (play/pause) button on the MD recorder to start recording. The REC indicator remains lit, and recording starts. • To stop recording temporarily, press REC PAUSE button or 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control. • To resume recording, press 6 (play/pause) button on the MD recorder or MD 6 (play/pause)

  • 25 3 Press SET button to select the track number. Rotate MULTI JOG dial to select desired track number (or press < / > button on the remote control). 4 Press SET button again to enter the character entry mode. The character sets present 11 characters alphabetically at a time in the upper portion of the display window. You can select a character from character s

  • JVC XM-G6, 31 MD Restrictions The MD records data in an original format that differs from that of conventional cassette tapes or DATs. Since there are some limitations with this recording format, the following types of symptoms may occur. These symptoms are not malfunctions. Symptoms “DISC FULL” appears, even though there is still enough remaining time on an MD. “DISC FULL” appears even though the number of tracks and recording time do not reach the limit. The JOIN function sometimes does not work. The remaining time on the MD does not increase even when tracks are erased. The sound drops out during fast forward or fast rewind. The amount of recorded time on the MD added to the amount of r

  • JVC XM-G6, 5 When connecting the XM-G6 MD recorder Make sure to turn off UX-G6R and unplug the AC power cord. Leave it until all the connections complete. DO NOT place XM-G6 unit or any other equipment onto AX-UXG6 stereo amplifier unit. Damage or malfunction may result from heat generating portion of AX-UXG6. 1 Turn off UX-G6R system and unplug the AC power cord from the wall outlet. 2 Place the UX-G6R’s units onto the XM-G6 unit. For example as follows, from top to bottom: AX-UXG6, XT-UXG6R, TD-UXG6, finally XM-G6. 3 Using the system control cable-C, connect XM-G6 unit to XT-UXG6R unit. When connecting the system control cable to the connecter Make sure to connect the cable to the termin

Related Products and Documents (MiniDisc Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Lenovo ThinkPad Edge 14 Troubleshooting manual lenovo/thinkpad-edge-14-327.pdf 05 Jan 2023 42
2 Bloomfield 9102A Owner's manual bloomfield/9102a-P77.pdf 03 Oct 2022 26 1.79 Mb
3 EDIFIER M3300 Operation & user’s manual edifier/m3300-638.pdf 04 Apr 2023 14 2.11 Mb
4 PASCO SF-9288 Instruction sheet pasco/sf-9288-EM8.pdf 01 Oct 2023 2
5 Cub Cadet Domestic Series 7000 Service manual cub-cadet/domestic-series-7000-9T5.pdf 01 Jan 2024 13
6 LG CU400 - Cell Phone Operation & user’s manual lg/cu400-cell-phone-35G.pdf 31 Jan 2023 16

Similar Resources:

  • Sharp

    MD-MT280E

    (52 pages)
    PORTABLE MINIDISCRECORDERThank you for purchasing this SHARP product.For the best performance, read this manual carefully.It will guide you in operating your SHARP product.MODELMD-MT280EOPERATION MANUAL0101PLUG INPOWERIf you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport.Customers with …
  • Sony

    MZ-R900

    (2 pages)
    MZ-R900DPCMD WALKMAN®PLAYER/RECORDER■ INCLUDES DIGITAL PCLINK (USB CABLE, DIGITAL PCLINK CONVERTER AND OPTICAL TOSLINK CABLE) FOR RECORDING YOUR FAVORITE MUSIC FILES FROM THE INTERNET■ DIGITAL PCLINK DELIVERS DIGITAL FIDELITY■ AUTOMATIC SYNCHRONIZED RECORDING■ AUTOMATIC TRACKMARK INSERTION■ USES ANY JUKEBOX/PLAYER APPLICATION■ CAN RECORD ALL INT …
  • Sony

    MDS-S9

    (62 pages)
    SERVICE MANUALVer 1.0 2001.06MINIDISC DECKAEP ModelUK ModelSPECIFICATIONSMDS-S9Model Name Using Similar Mechanism MDS-S50MD Mechanism Type MDM-7AOptical Pick-up Name KMS-260BSystem MiniDisc digital audio systemDisc MiniDiscLaser Semiconductor laser (λ = 780 nm) Emission duration: continuousLaser output MAX 44.6 µW1)1) This output is the value measured at …
  • Sony

    MDX-C5960R

    (66 pages)
    MICROFILMSERVICE MANUALGerman ModelMDX-C5960RUS ModelCanadian ModelE ModelMDX-C5970AEP ModelUK ModelMDX-C5970RSPECIFICATIONSMDX-C5960R/C5970/C5970RPhoto: MDX-C5960RModel Name Using Similar Mechanism MDX-C7900/C7900RBase Mechanism Type MG-164N-138Optical Pick-Up Name KMS-241B/J1NPFM/AM (MW/LW) MINIDISC PLAYER– Continued on next page – …
  • Kenwood

    DMF-3020

    (56 pages)
    STEREO MINIDISC RECORDERB60-4074-00 01 MA (K,P,T) MC 9806DMF-5020DMF-3020MD-203INSTRUCTION MANUALThis instruction manual is used to describe multiple models listed above.Model availability and features (functions) may differ depending on the country and salesarea. …
  • Pioneer

    MEH-P7300R

    (92 pages)
    PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936C PIONEER CORPORATION 2001K-ZZS. MAR. 2001 Printed in Ja …

Comments, Questions and Opinions: