JVC DLA-RS1 Instructions Manual

Text of JVC DLA-RS1 User Guide:

• JVC DLA-RS1, 33 Preparation Basic Operation Settings Troubleshooting OthersGetting Started ENGLISH A Select the image profile B Adjust image quality C Register the image profile a Select ASetupB g AProfile MemoryB b Register the setting D To end Registering User-defined Image Profiles z See AChanging the Default Image Profile ValuesB for procedures on adjusting the image quality. (pP32) z To return to the default values, reset the registered settings with AProfile MemoryB in the setting menu. (pP27 - L) z Adjustment settings of image quality will not be registered if other image profiles are selected before registering these settings. CAUTION Setup Image Video Install. Func. Info. Image Pro

• JVC DLA-RS1, 24 4 Settings Setting Menu Example: When AAspectB is changed from A4:3B to A16:9B A Display the setting menu B Select “Video” g “Aspect” C Set to “16:9” D To end Projected images can be adjusted to a desired view by changing the default settings. Procedures for Menu Operation Setup Image Video Install. Func. Info. Image Adjust Color Temp. Gamma Offset Pixel Adjust Setup Image Video Install. Func. Info. COMP HDMI Aspect Film Mode Color System Black Level 4:3 16:9 Zoom BCONFIRM ASELECT Setup Image Video Install. Func. Info. COMP HDMI Aspect Film Mode Color System Black Level 4:3 16:9 Zoom BCONFIRM ASELECT DLA-RS1_EN.book Page 24 Wednesday, January 24, 2007 9:23 AM Downl

• JVC DLA-RS1, 41 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH Cleaning and Replacing the Filter A Remove the inner filter B Clean the filter C Reinstall the inner filter Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. z Wash the filter with water and dry it in a shaded area. z In extremely soiled cases, use of a neutral detergent is recommended. Put on rubber gloves when using a neutral detergent. z After washing the filter with water, make sure that it is completely dry before reinstalling. Otherwise, electric shocks or malfunctions may occur. z Do not clean the filter with a vacuum cleaner or air duster. The filt

• JVC DLA-RS1, 35 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH Video image is fuzzy Is the focus correctly adjusted? Adjust accordingly using the focus adjustment ring. pP21 Is the unit placed too near or too far away from the screen? Set the unit at a correct distance from the screen. pP18, 19 Video images are missing Has setting been performed for screen mask? Set the AMaskB in the setting menu to AOffB. pP23, 27 - O Is the display out of position? Alter the APicture PositionB value in the setting menu to ensure that images are not missing. pP27

• JVC DLA-RS1, 6 42 Others RS-232C Interface Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross cable (D-Sub 9 pin). The command between this unit and the computer consists of AHeaderB, AUnit IDB, ACommandB, ADataB and AEndB. z Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte)  Header This binary code indicates the start of communication.  Unit ID This code specifies the unit. The binary code is fixed at A8901B. RS-232C Specifications Pin No. Signal Operation Signal Direction 2 RxD Receive

• JVC DLA-RS1, 4 30 Setting Menu (Continued) Settings z Changing the lamp power will not change the lamp time (lamp life). z The setting cannot be changed within approximately 90 seconds after this unit has been turned on. z Settings cannot be changed within approximately 60 seconds after they are made. z This can also be displayed from the remote control. (pP12) Install.>High Altitude Mode a High Altitude Mode Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level). On Activate. Off Do not activate. Func.>Back Color b Back Color Configures the screen color displayed when there is no input signal. Blue Sets screen color to ABlueB

• JVC DLA-RS1, 12 Controls and Features (Continued) 1 Getting Started  Remote Control To turn on the power To set screen size (pP22) To set gamma (pP32) To adjust the outline of the image (pP32) To set color temperature (pP32) To hide the image temporarily (pP21) To adjust brightness (pP32) To return to the previous menu To illuminate buttons on the remote control To select or confirm Select input mode (pP20) To turn off the power To adjust color density (pP32) To switch image profile (pP32) To adjust contrast (pP32) To display information To display the menu (pP24) To display test patterns DLA-RS1_EN.book Pa

• JVC DLA-RS1, 1 10 Getting Started Controls and Features  Rear Side/Top Surface Exhaust Vent To adjust the size of the image (pP21) To adjust the focus (pP21) Lamp Cover (pP38) To connect the power cord (pP20) Remote Sensor (pP13)  Front Side/Left Side Remote Sensor (pP13) Air inlets Lens Cap z This unit comes with buffer material that cushions the lens. Remove the buffer material before use. z Do not throw away the buffer material, retain for future use. (pP46) DLA-RS1_EN.book Page 10 Wednesday, January 24, 2007 9:23 AM Downloaded from www.Manualslib.com manuals search engine

• JVC DLA-RS1, 4 26 Setting Menu (Continued) Settings z ANormalB is suitable for normal circumstances but AAB, ABB or ACB can be selected according to your preference. z This setting can also be configured from the remote control. (pP12) z The horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down. z To adjust, use still images with distinct outlines. z As the adjustments are minor, the effect may be difficult to see for some images. z This setting can

• JVC DLA-RS1, 20 3 Basic Operation Projecting Image Preparation z Remove the lens cap. A Insert the power plug to the power outlet B Turn on the power C Project the image a Select input mode b Play back the selected device D Adjust the position of the projection screen This section describes the basic operations to project input images on the screen. z You can also press the [STANDBY/ON] button on the unit to turn on the power. (pP11) z You can also select the input mode by pressing the [INPUT] button on the unit. (pP11)

• JVC DLA-RS1, 25 Preparation Basic Operation Settings Troubleshooting OthersGetting Started ENGLISH Item values shown in are factory settings. z Items that can be configured differ according to the input signals. z AContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP12) z ATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal. * The red, green and blue colors can be adjusted and registered respectively. z This setting can also be configured from the remote control. (pP12) Setting Menu Image>Image Adjust A Contrast Adjusts the contrast of the projected image. (Black) b30 f 30 (White) B B

• 13 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others How to Use the Remote Control z If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batteries according to the +- marks. z Be sure to insert the - end first. z If an error occurs when usin

• JVC DLA-RS1, 19 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH B Adjust such that the projected image is in the center of the screen z It may be necessary to set APixel AdjustB in the setting menu after adjusting the image position. (pP26 - J) Determine the distance from the lens to the screen to achieve your desired screen size. This unit uses a 2.0x manual zoom lens for projection.  Relationship Between Projection Screen Size and Projection Distance z The projection distances in the table are provided only as a guide. Use them as a reference during installat

• JVC DLA-RS1, 22 3 Basic Operation Convenient Features during Projection The projected image can be set to a most appropriate screen size (aspect ratio). z The screen size can also be set from AAspectB of the setting menu. (pP28 - R) z When high definition images are input, the screen size is fixed at A16:9B.  Input Image and Projected Image by Different Screen Size Settings z Depending on the input image, selecting A4:3B may result in a vertically stretched image while selecting A16:9B provides you with the most appropriate screen size. Images for which quality at the outer area has deteriorated can be projected by masking (hiding) t

• JVC DLA-RS1, 5 34 Troubleshooting Troubleshooting Before sending the unit to your authorized dealer for repair, check the following points. The following situations are not malfunctions.  You do not need to worry under the following situations if there is no abnormality on the screen. z Part of the top surface or front of the unit is hot. z A creaking sound is heard from the unit. z An operating sound is heard from the internal of the unit.  Perform the following operations when the unit is unable to operate normally due to external static or noises. A When the unit is in standby mode, pull out the power plug, then insert again. B Press the power button on the unit

• 17 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH z Set ACOMPB in the setting menu to ASCARTB. (pP27 - P) z Set ACOMPB in the setting menu to ARGBB. (pP27 - P) z For information on compatible input signals, see ASpecificationsB. (pP48) Connecting via SCART-RCA Cable Connecting via RGB Video Cable SCART-RCA cable (sold separately) DVD pl

• JVC DLA-RS1, 3 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH - To allow better heat dissipation, keep a clearance between this unit and its surrounding as shown below. When this unit is enclosed in a space of dimensions as shown below, use an air-conditioner so that the internal and external temperatures are the same. - This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local

• JVC DLA-RS1, 40 Replacing the Lamp (Continued) 5 Troubleshooting After installing a new lamp unit, reset the lamp time. A Insert the power plug to the power outlet B Reset lamp time Resetting Lamp Time z The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3 seconds. After that, the unit switches to standby mode. z Reset the lamp time only when you have replaced the lamp. z Never reset it when the lamp is still in use. Otherwise, the approximate standard for gauging replacement time may be inaccurate and lamp blowout may occur. CAUTION Light on (Red) Press for 2 seconds or more z Press in the o

• JVC DLA-RS1, 21 Preparation Basic Operation Settings Troubleshooting OthersGetting Started ENGLISH E Adjust the image size (zoom) F Adjust the focus G Turn off the power Hold and rotate the tab z The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time. z You can also press the [STANDBY/ON] button on the unit to turn off the power. (pP11) z Put back the lens cap after use to prevent the lens from dirt. z Pull out the power plug when the unit will not be used for a prolonged time. Bigger Smaller Turn the ring and adjust You can hide

• JVC DLA-RS1, 11 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH Light on (Red): Warning mode (pP37) Light on/Blinking (Orange): Lamp warning (pP37) To turn on/off the power To hide the image temporarily (pP21) To return to the previous menu To switch input (pP20) To display the menu (pP24) Light on (Red): Standby mode Light on (Green): During projection Blinking (Green): Image is temporarily hidden (pP21) Blinking (Red): Cool Down mode (pP21) To select or confirm Air Inlets/Filter (pP41) To adjust the position of the image (pP19) Feet: The height (0 - 5 mm) can be adjusted by turning the

• 8 1 Getting Started Getting Started Safety Precautions................................................2 Main Features .....................................................6 Contents..............................................................8 How to Read this Manual/ Accessories/Optional Accessories.......................9 About this Manual...................................................

• 45 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH This section shows the communication examples of RS-232C.  Operating command  Reference command RS-232C Communication Examples Type Command Description Connection check PC  This unit: 21 89 01 00 00 0A This unit  PC: 06 89 01 00 00 0A Checks connection Power (On) PC  This unit: 21 89 01 50 57 31

• JVC DLA-RS1, 27 Preparation Basic Operation Settings Troubleshooting OthersGetting Started ENGLISH z AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage ProfileB. z The display position value varies with the input signal. z This adjustment is available only for analog input signals. z This setting is available only when projecting the HDMI input. z Masking is available only when high definition images are input. z This setting is available only when projecting the component video input. Setup>Profile Memory L Profile Memory Registers or deletes image profiles. Save User1 Registers image p

More Instructions:

	JVC DLA-RS1 Instructions manual 22-07-2023 50	DOWNLOAD
	JVC DLA-RS1 Instructions manual 14-08-2022 150	DOWNLOAD
	JVC DLA-RS1 Information 30-12-2023 5	DOWNLOAD
	JVC DLA-RS1 Instructions manual 03-07-2023 150	DOWNLOAD

Related Products and Documents (Projector):

Comparable Devices:

Similar Resources:

• Sony BRAVIA VPL-HW15 (2 pages) The BRAVIA VPL-HW15 projector delivers the excitement and immediacy of HD to a new audience. It brings technologies capable of convincingly reproducing the cinematic experience within the reach of first time buyers of home cinema solutions. Featuring a stylish design, triple-panel SXRD and 8-stage image processing by the renowned BRAVIA ENGINE 2™, the VPL- …

• Sanyo PDG-DXL100 - XGA DLP Projector (1 pages) PTITDEFRESENProduct Operation Notice1. If the Netscape user wants to control the projector from the web, the user needs to use Netscape 9.X or upgrade version. (p.32)2. During the standby mode status, the projector responds to “Power On” through RS232/PJLink/Telnet commands. (p.58, 60)3. Baud rate of 9600 bps, written on Page 56 of owner's …

• Panasonic PT-LW376 (140 pages) Operating InstructionsFunctional ManualLCD Projector Commercial UseThank you for purchasing this Panasonic product. ■ This manual is common to all the models regardless of su󰀩xes of the Model No. f D: for India f T: for Taiwan ■ Before operating this product, please read the instructions carefully, and save this manual for future use. ■ Before u …

• Vivitek D925TX (59 pages) Copyright This publication, including all photographs, illustrations and software, is protected under international copy-right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2009 Disclaimer The information in this document is subject to chan …

• Epson 5350 - EMP SVGA LCD Projector (8 pages) EPSON PowerLite 5350/7250/7350 Projector8/99 EPSON PowerLite 5350/7250/7350 Projector - 1Projector Specifications GeneralType of display Poly-silicon Thin Film Transistor (TFT)Size of liquid crystal panels Diagonal: 1.3 inches (33.6 mm) Lens F=2.0–2.3, f=55–72 mmResolution PowerLite 5350: SVGA, 800 × 600 pixelsPowerLite 7250/7350: XGA, 1024 × 768pix …

• Christie Mirage 4K25 (2 pages) AcademiaAerospaceAutomotive GovernmentHeavy machineryMuseumsNational labsOil and gasResearch and developmentSciences and biotechnologyTheme parksFirst and only DLP 4K at 120Hz performanceFor a quantum leap in image processing, look no further than the Christie® Mirage 4K. Delivering the highest DLP® resolution on the market today and based on Christie’s …

Comments, Questions and Opinions: