Manualios.com

Epson PhotoPC3100Z Service Manual

Epson PhotoPC3100Z Manual Online:

3.25, 2733 votes
Epson PhotoPC3100Z User Manual
Epson PhotoPC3100Z User Guide
Epson PhotoPC3100Z Online Manual

Text of Epson PhotoPC3100Z User Guide:

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A PRODUCT DESCRIPTION Operation 24 1.4 Operation 1.4.1 Switch / Button Figure 1-12. Button Layout Image quality button Shutter switch Visibility adjustment dial Self timer button Flash button Zoom switch Print button B button Power switch Dial switch A button C button 1 button 2 button 3 button 4 button F button Table 1-6. Switch / Button List Switch / Button Indication Meaning / Functions Dial switch Special shooting mode LCD shooting mode VF shooting mode Playback mode Expansion / PC connection mode Set up mode Shutter switch No indication Shutter Zoom switch W,T Zoom selection Visibility adjustment dial No indication Ad

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Disassembly and Assembly Overview 62 4.1 Overview This section describes procedures for disassembling the main components of the product. Unless otherwise specified, disassembly units or components can be reassembled by reversing the disassembly procedure. Things, if not strictly observed, that could result in injury or loss of life are described under the heading “Warning”. Precautions for any disassembly or assembly procedures are described under the heading “CAUTION”. Chips for disassembling procedures are described under the heading “CHECK POINT”. If the assembling procedure is different from the reversed procedure of the disassembling, the p

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A PRODUCT DESCRIPTION Functional Specification 16 1.2.6 Video Recording Mode  Recording  Maximum 35 seconds continuous shooting (Up to 25 seconds with the sound recording.)  When the video recording is enabled, by pressing the shutter button, the shooting will be started.  Pressing shutter during video recording will end recording.  Simultaneous voice recording  Seamless digital zoom operation is available during video recording. (Optical zoom is not available.)  Format: motion JPEG for QTM. PAL is 12.5 frame/ sec.  Digital zoom is available during video recording.  Playback �

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Disassembly and Assembly Assembly 73 4.3.3 Installing the CABINET TOP 1. Install the ST1 board (1) to the CABINET TOP and secure it with 1 screw (2) (2.0x5). 2. Connect the pin to ST1 board. 3. Secure the CABINET TOP to the CABINET FRONT with 3 screws (3) (1.7x5). Figure 4-11. Installing the CABINET TOP C H E C K P O I N T  Hold the pin when soldering the pin so that the pin does not get off. (See Figure 4-11.)  When soldering the pin, be sure that the soldering part is shorter than the length of pin. (See Figure 4-11.) pin Solder the pin within the length of the pi

  • PhotoPC 3100Z Revision A Disassembly and Assembly Assembly 72 4.3.2 Installing the SY1 Board 1. Insert the connector of ASSY, WIRE (2) to the SY1 board (1). 2. Connect the connector CN303 of SY1 board to the connector CN106 of the CA2 board. Secure it with 2 screws (1.7x5). 3. Connect the harness from the TB1 board to the connector CN301 of the SY1 board. Figure 4-9. Ins

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision B Adjustment Adjustment 91 5.4.8.2 LCD RGB Offset Adjustment PREPARATION  Power switch: ON  Dial switch: Communication mode ADJUSTMENT METHOD 1. Double-click on the Dsc Calibration. 2. Select “0” on the LCD “RGB Offset”. Figure 5-19. LCD RGB Offset Adjustment Button Location ADJUSTMENT METHOD Adjust LCD “RGB Offset” so that the amplitude of the CL423 waveform becomes 7.2V ± 0.15Vp-p. Figure 5-20. RGB Offset Adjustment CL423 waveform 7.2V ± 0.15Vp-p

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A PRODUCT DESCRIPTION Power Supply 30 1.7 Power Supply 1.7.1 Battery BATTERY SPECIFICATION  AA Size: 4 AA size batteries are needed  Ni-HM charging battery / Ni-Cd charging battery / Alkaline battery / Lithium battery NOTE: Mangan batteries must not be used. AC ADAPTER Exclusive AC adapter must be used.  EU-40 7.0V, 2.0A DATE BACK-UP BATTERY  Lithium ion secondary battery 1.7.2 Battery Life NOTE: The figures above are estimated on our measurement conditions. LCD shooting : energy saving 30 seconds, strobe flashing 50%, image quality is  , normal compression, delete image by PC when CF is full, shooting interval 1 m

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Operating Principles Circuit 47 2.2.2.1 Circuit Description DIGITAL CLAMP Extracting the average value of the optical black section of the CCD from the subsequent data makes the black level of the CCD output data uniform for each line. The optical black section of the CCD averaged value for each line is taken as the sum of the value for the previous line multiplied by the coefficient k and the value for the current line multiplied by the coefficient 1-k. SIGNAL PROCESSOR  γ correction circuit This circuit perform

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Disassembly and Assembly Assembly 71 4.3 Assembly 4.3.1 Assembling the Lens Assembly 1. Check if there is no dust or scratch on the surface of the Optical Filter (2) and install it toe the LENS ASSY (1). 2. Insert the SPACER (3). 3. Remove the protective sheet of CCD (4) and check if there is no dust or scratches on the surface and install the CCD, aligning with guide rib of the holder. 4. Install the MOUNTING LENS (5), aligning with guide pin of the holder and secure it with 3 screws (6) (1.7x6). 5. Install the SPACER INSULATOR (7), aligning the guide pin of the holder. 6. Attach the PAD (10) to the Lens. 7. Install the CA1 (8) holder, ali

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Operating Principles Circuit 48 2.2.2.3 LCD Block During monitoring, YUV conversion is carried out for the 10-bit CCD data which is input from the A/D conversion block to the ASIC and is then transferred to the DRAM so that the CCD data can be displayed on the LCD. The data which has accumulated in the DRAM is passed through the NTSC encoder, and after D/A conversion is carried out to change the data into a Y/C signal, the data is sent to the LCD panel and displayed. If the shutter button is pressed in this condition, the 10-bit data which is output from the A/D conversion block of the CCD is sent

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Operating Principles Circuit 50 2.2.3 PW1 Circuit Description 2.2.3.1 Circuit Description OVERVIEW The power circuit is mainly composed of the following blocks.  Switching controller (IC501)  Digital 5 V and analog system power output (T5001, Q5001)  Digital 2.5 V system power supply (Q5007)  Digital 3.35 V system power supply (Q5018)  LCD system power supply (Q5008, T5002)  Backlight power supply output (Q5013, T5003) The figure below is the PW1 electric circuit block diagram. Figure 2-12. PW1 Cir

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision B Adjustment Adjustment 85 5.4.3 Lens Adjustment PREPARATION  Power switch: ON  Dial switch: Communication mode Figure 5-6. Lens Adjustment ADJUSTMENT CONDITION  Siemens star chart (A3)  Fluorescent light illumination with no flicker (incandescent light cannot be used.)  Illumination above the subject should be 400lux ± 10% ADJUSTMENT METHOD 1. Set the siemens star chart 150 cm ± 3 cm so that it becomes center of the screen. 2. Double-click on the Dsc Calibration. 3. Click the “Focus”, and Click the “Yes”. Figure 5-7. Lens Adjustment Button Location 4. Adjus

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Appendix ASP List 122 7.5 ASP List Table 7-1. ASP List Ref No. Description 1-1 COVER JACK-SX322/JEP 1-10 COVER CF-SX322/JEP 1-101 SCR S-TP PAN PCS1.7X5.0 1-102 SCR S-TPG PAN PCS 1.7*3 1-103 SCR S-TPG PAN PCS1.7*5 1-104 SPECIAL SCREW-2.0X4.1 1-105 SCR PAN PCS2X5 1-106 SPECIAL SCREW-1.4*2.0 1-107 SCR PAN PCS1.7X3 1-108 SCR PAN PCS1.7X4 1-11 SHAFT COVER CF-SX321/JEP 1-12 "ASSY,CABINET BACK-322/JEP" 1-13 REFRECTOR EYE B-SX321/JEP 1-14 REFLECTOR EYE A-SX321/JEP 1-15 COVER EYE-SX321/JEP 1-1

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Disassembly and Assembly Disassembly 70 4.2.4 Removal of Holder Battery and PW1 Board The following is the discharging process of holder battery and PW1 board. Disassembling procedure should follow numbers indicated in the figure below. The blue oblique letters in the figure show the tightening torque. Figure 4-6. Removal of Holder Battery and PW1 Board A D J U S T M E N T R E Q U I R E D When replacing the PW1 Board, perform adjustment. (See Ch5.) 9. S-TP PAN PCS 1.7x5 0.16±0.02N·m/(1.6±0.2kg·cm) 1. PAN PCS 1.7x4 0.18±0.02N·m (1.8±0.2kg·cm) 2. PAN PCS 1.7x4 0.16±0.02N·m (1.6±0.2kg·cm) 3. S-TP PAN PCS 1.7x5 0.18±0.02N·m

  • Revision Status Revision Issued Date Description A April 12, 2001 First Release B July 17,2003 "AWB Adjustment" on page -86 : Add the CAUTION "Firmware Upload" on page -95 : error correction in CAUTION "Firmware Upload By CF Card" on page -96: Add the new method “Re-installing the Expanded Functions“ on PAge -96: Delete the section.

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision B Adjustment Adjustment 83 5.4.2 PW1 Board Adjustment Adjustment is necessary when you replaced certain parts on the PW1 board, which is described in this section, but not required when you replaced PW1 board. 5.4.2.1 PW1 Board Measurement / Adjustment Points Figure 5-5. Measurement Points / Adjustment Points PREPARATION 1. Remove the SY1 board and holder battery. 2. Connect the SY1 board again. NOTE: The harness connecting SY1 board and TB1 board may not be connected. 3. Insert the CompactFlash card. 4. Turn on the power switch, and then set to t

  • PhotoPC 3100Z Revision A PRODUCT DESCRIPTION Functional Specification 17 1.2.11 Internal Clock  Internal clock  Internal clock is built-in  Record the shooting date and time on the image (Month / Day / Year, Hour / Minute / Second)  Date and time are held by lithium ion secondary battery. (When lithium ion battery is charged full: date and time are held for at leas

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A PRODUCT DESCRIPTION Functional Specification 14  Continuous shooting is available up to the file size of 3732 KB of usable buffer memory. NOTE 1:Flash is set Off forcibly. NOTE 2:  H mode is prohibited.  Digital Zoom 1.1x to 2 x zooming ( 0.1x step) by Seamless Digital zoom is available. It stores images, adjusting the image quality to the image size of each recording mode. It means as follows;  : 640 x480  : 1600x1200  ,  H (TIFF): 2048 x 1536  H : 2544 x 1904  Monochrome Available

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Operating Principles Circuit 45 2.2.1.5 Transfer of Electric Charge by the Horizontal CCD The transfer system for the horizontal CCD employs a 2-phase drive method. The electric charges sent to the final stage of the horizontal CCD are transferred to the floating diffusion, as shown in Figure 2-8. Figure 2-8. Horizontal Transfer of CCD Imager and Extraction of Signal Voltage RG is turned on by the timing in (1), and the floating diffusion is charged to the potential of PD. The RG is turned off by the ti

  • Epson PhotoPC3100Z, PhotoPC 3100Z Revision A Appendix ASP List 123 1-6 "UNIT,DIAL" 1-7 "COMPL PWB,TB-2" 1-8 BUTTON BACK A-SX322/JEP 1-9 BUTTON BACK B-SX322/JEP 2-1 LENZ(ASSY) 2-10 HOLDER CHASSIS-SX321/JEP 2-101 SCR S-TP PAN PCS1.7X5.0 2-107 SCR PAN PCS1.7X4 2-109 SCR PAN PCS1.7X2.5F 2-11 STAND-SR921/JEP 2-110 SCR S-TPG PAN PCS1.7X6E 2-12 HOLDER LENZ-SX321/JEP 2-13 "COMPL PWB,CA-2" 2-14 HOLDER SPEAKER-SX321/JEP 2-15 SPACER SPEAKER B-SR922JEP 2-16 "SPEAKER,8" 2-17 MICROPHONE 2-18 SPACER SPEAKER F-SR922JEP 2-19 HOLDER MONITOR-SX3

Related Products and Documents (Digital Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Silvercrest SFE 450 A1 Operating instructions manual silvercrest/sfe-450-a1-NP6.pdf 17 Oct 2022 86
2 Husqvarna 170BT Operator's manual husqvarna/170bt-MO3.pdf 24 Sep 2022 19
3 Hunter 20578 Manual de usuario hunter/20578-ETR.pdf 31 Oct 2023 22
4 IRiver on Instruction book iriver/on-3RG.pdf 19 Jun 2022 3
5 Baumatic PT2810SS Operation & user’s manual baumatic/pt2810ss-TOO.pdf 20 Aug 2023 44 1.88 Mb
6 Aiwa CSD-ED20 Operating instructions manual aiwa/csd-ed20-ME5.pdf 15 Jul 2023 28 3.01 Mb

Similar Resources:

  • Casio

    EX-Z330 - EXILIM Digital Camera

    (194 pages)
    1ETo go to “Getting the Most Out of Dynamic Photo” click here!Thank you for purchasing this CASIO product.• Before using it, be sure to read the precautions contained in this User’s Guide.• Keep the User’s Guide in a safe place for future reference.• For the most up-to-date information about this product, visit the official EXILIM Website at ht …
  • Canon

    A430

    (116 pages)
    Руководство пользователя камерыРасширенные операции ЦИФРОВАЯ КАМЕРАРуководство пользователя камеры, Расширенные операцииВ этом Руководстве приводится подробное описание функций камеры и пор� …
  • Pentax

    Optio E70

    (24 pages)
    When you use this camera for the first time, it is recommended you read this Quick Guide first in order to gain a feel for the basic operation of the camera. Refer to the separately supplied "Operating Manual" by CD for further explanation of functions and advanced operations of the camera and how to connect the camera to your computer.Thank you fo …
  • Canon

    EOS-1D Mark IV

    (74 pages)
    1234IntroductionContents at a GlanceDownloading ImagesCamera SettingsRemote ShootingReferencePreferencesIndexCommunication Software for the CameraEOS UtilityVer. 2.7Instruction Manual1D Mk IV1Ds Mk III1D Mk III5D Mk II7D50D40DREBELT1i500DREBELXSi450DREBELXS1000DO Content of this Instruction ManualO EU is used for EOS Utility.O Camera model is displayed as an …
  • Mobotix

    M12

    (2 pages)
    MOBOTIXMOBOTIX M12 Quick InstallationQuick InstallationXMOBOTIXSecurity-VSecurity-Vision-Systemsision-Systems.com123CamPCManual Part 1 p. 52Manual Part 1 p. 53Manual Part 1 p. 52Manual Part 1 p. 61Manual Part 1 p. 64Manual Part 1 p. 53Prerequisites (MOBOTIX Camera, Standard PC, PoE Switch, CAT 5 Cable)Connecting the …
  • MSA

    EVOLUTION Receiver Station

    (8 pages)
    EVOLUTION®Thermal Imaging Camera Remote Wireless Video Receiver SystemInstruction ManualTHIS MANUAL MUST BE READCAREFULLY BY ALL INDIVIDUALSWHO HAVE OR WILL HAVE THERESPONSIBILITY FOR USING ORSERVICING THE PRODUCT. Likeany piece of complex equipment,the unit will perform as designedonly if it is used and maintained inaccordance with the manufactur-er’s in …

Comments, Questions and Opinions: