Epson DLQ-3500 Manual 

Text of Epson DLQ-3500 User Guide:

• Special Papers (3/6) EPSON DLQ-3500 Quick Guide To tear off and eject labels Always tear off and eject labels as described below. c Caution: Never feed labels backward using the Load/Eject button, Tear Off/Special Paper button, or knob on the right side of the printer. Labels can easily peel off their backing and jam the printer. 1. At the back of your pri

• Epson DLQ-3500, Special Papers (5/6) EPSON DLQ-3500 Quick Guide ❏ Tractor is selected as the paper source on the control panel. ❏ The setting of the page length for tractor in the default settings matches the page length of the form you use. See “Changing default settings” for more information. 2. Turn on Overlapping Forms and Skip over perforation settings in the default-setting mode. Note: When Overlapping Forms is turned on in the default-setting mode, the printer automatically activates the auto paper thickness function even though the paper-thickness lever may be set to another position. 3. Follow the instructions in “Loading continuous paper.” c Caution: ❏ Printing

• Special Papers (4/6) EPSON DLQ-3500 Quick Guide 3. Follow the instructions in “Loading continuous paper.” c Caution: ❏ Printing on the edge of continuous forms with labels can damage the print head. ❏ When loading continuous forms with labels, make sure the left edge of the form is no further than 3 cm to the left of the arrow mark (when facing the

• Epson DLQ-3500, Continuous Paper (3/4) EPSON DLQ-3500 Quick Guide 10. Slide the right sprocket to remove any slack in the paper. Then push down the sprocket lock lever to lock the sprocket in place. 11. Turn on the printer if it is turned off. The printer is ready to start printing. When using continuous paper, you can use the tear-off function to tear off printed pages and save the blank pages that are usually wasted between print jobs. For more information, see “Using the tear-off function.” Note: Always make sure there is at least one more sheet than re

• Epson DLQ-3500, Continuous Paper (4/4) EPSON DLQ-3500 Quick Guide 3. Tear off all printed pages using the tear-off edge of the printer cover. * tear-off edge When you resume printing, the printer feeds the paper back to the top-of-form position and begins printing. (You can also manually feed the paper back to the top-of-form position by pressing the Tear Off/Special Paper button.) Advancing paper to the tear-off position automatically To automatically advance your printed documents to the tear-off position, t

• Epson DLQ-3500, Special Papers (2/6) EPSON DLQ-3500 Quick Guide 2. Turn on Overlapping Forms and Skip over perforation settings in the default-setting mode. Note: When Overlapping Forms is turned on in the default-setting mode, the printer automatically activates the auto paper thickness function even though the paper-thickness lever may be set to another position. c Caution: ❏ Printing on the edge of overlapping multipart forms can damage the print head. ❏ Be sure to turn on Overlapping Forms and Skip over perforation settings in the default-setting mode when using this type of paper; otherwise your printer may be damaged. 3. Fo

• Epson DLQ-3500, Single Sheets with the Cut-Sheet Feeder (2/3) EPSON DLQ-3500 Quick Guide 6. Insert the paper along the right paper guide and adjust the position of the left paper guide so that it matches your paper’s width. Make sure the position of the guide allows the paper to move up and down freely. Then lock the left guide in place. Note: Load paper with the printable side up. If you are using pre-printed forms, load the forms top-down. 7. Push back the paper set levers to clamp the paper against the guide rollers. 8. Before printing, make sure that Manual/CS

• Epson DLQ-3500, Paper-Type Switching (2/2) EPSON DLQ-3500 Quick Guide 3. Select Tractor as the paper source on the control panel by pressing the Paper Source button. The printer automatically advances the continuous paper from the standby position to the loading position when it receives data. Paper Source Pau 3s LF/F Off al Paper ff pe Manual/CSF Tractor

• Micro Adjust Function (3/4) EPSON DLQ-3500 Quick Guide Micro Adjust Function The Micro Adjust function allows you to move the paper forward or backward in 0.141 mm (1/180-inch) increments so that you can make precise adjustments to the top-of-form and tear-off positions. Adjusting the tear-off position If your paper perforation is not aligned with the tear-of

• Epson DLQ-3500, Buttons and Lights (2/2) EPSON DLQ-3500 Quick Guide 5 Paper Source button Selects a paper source. Tractor light On when continuous paper is selected. Manual/CSF light On when single-sheet is selected. 6 LF/FF button ❏ Feeds paper line by line when pressed shortly. ❏ Ejects a single sheet or advances continuous paper to the next top-of-form position when held down for a few seconds. 7 Load/Eject button ❏ Loads a single sheet of paper. ❏ Ejects a single sheet of paper if a sheet is loaded. ❏ Loads continuous paper from the standby position. ❏ Feeds continuous paper backward to the standby position if a sheet is loaded. 8 Micro Adjust When you hold down the Pau

• Epson DLQ-3500, Single Sheets with the Automatic Sheet Alignment Unit (1/1) EPSON DLQ-3500 Quick Guide Single Sheets with the Automatic Sheet Alignment Unit Follow these steps to load paper using the automatic sheet alignment unit: 1. Make sure that Manual/CSF is selected as the paper source on the control panel. If not, select it by pressing the Paper Source button. 2. Set the paper-thickness lever to the appropriate position for the type of single sheet you are using referring to the table in “Paper-Thickness Settings.” Normally set it to AUTO. * paper-thickness lever 3. Insert paper into the automatic sheet alignment unit so that the tip of the paper goes behind the rollers of the

• Epson DLQ-3500, Default Settings (2/4) EPSON DLQ-3500 Quick Guide Page length for tractor This setting allows you to set the page length (in inches) for the continuous paper loaded on the tractor. Skip over perforation This feature is available only when continuous paper is selected as the paper source. When you turn on this feature, the printer provides a one-inch (25.4 mm) margin between the last line printed on one page and the first line printed on the next page. Because most application program margin settings override margin settings from the control panel, you should use this setting only if you cannot set your top and bottom margins using your application. Auto tear-off Wh

• Epson DLQ-3500, Paper-Thickness Settings (1/2) EPSON DLQ-3500 Quick Guide Paper-Thickness Settings Usually, set the paper-thickness lever to the AUTO position as shown below; your printer automatically adjusts itself to the thickness of the paper loaded in the printer. If you are not content with the printing quality, especially when using special paper such as multipart forms, you can manually set the paper-thickness lever to the appropriate position. The higher the number you set the paper-thickness lever to, the wider the space between the

• Epson DLQ-3500, Single Sheets with the Paper Guide (2/2) EPSON DLQ-3500 Quick Guide ❏ If you need to adjust the position of the paper after it is loaded, see “Adjusting the top-of-form position” and follow the instructions. After printing a sheet, the printer ejects it onto the paper guide and the Paper Out and Pause lights come on. If you are printing a multiple-page document, remove the printed sheet and insert a new sheet into the paper guide. The printer automatically advances the paper and resumes printing. Note: If the printer does not eject the printed sheet, press the Load/Eject button.

• Epson DLQ-3500, Default Settings (3/4) EPSON DLQ-3500 Quick Guide Auto I/F (interface) wait time When the printer is in the auto interface mode and it receives no data from the currently selected interface for the amount of time specified with this setting, it determines which interface is receiving data and switches to that interface. You can specify either 10 seconds or 30 seconds for the auto interface wait time. Parallel I/F bidirectional mode The Parallel Interface bidirectional transfer mode is used when this feature is on. If bidirectional transfer mode is unnecessary, turn this off. Packet mode Be sure to select Auto when printing from Windows applications using the printer driver i

• Epson DLQ-3500, Special Papers (6/6) EPSON DLQ-3500 Quick Guide 2. Make sure that Manual/CSF is selected as the paper source on the control panel. If not, select it by pressing the Paper Source button. 3. Select Envelope on the control panel by pressing the Tear Off/Special Paper button. 4. Load envelopes following the instructions in “Single Sheets with the Paper Guide,” “Single Sheets with the Cut-Sheet Feeder” or “Single Sheets with the Automatic Sheet Alignment Unit.” Be sure to fold the flap and be careful of the flap’s orientation. from the paper guide * top edge first and flap side down Postcards You can print on a variety of postcards by loading them

• Epson DLQ-3500, Ribbon Cartridge (2/2) EPSON DLQ-3500 Quick Guide 4. Press the tab at the upper right of the cartridge holder and pull the cartridge out of the printer. 5. Remove the new ribbon cartridge from its package and turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. 6. Hold the ribbon cartridge with the part where the ribbon is exposed facing down and the ribbon-tightening knob facing to the front of the printer. Then guide the ribbon under the print head, and snap the cartridge into place so that the tabs on both sides of the cartridge fit into the notches in the cartridge holder. 7. Turn the ribbon-tightening knob again to remove

• Epson DLQ-3500, Single Sheets with the Cut-Sheet Feeder (3/3) EPSON DLQ-3500 Quick Guide After printing a page of your document, the printer ejects it onto the paper guide and the Paper Out and Pause lights come on. If you are printing a multiple-page document, remove the printed sheet and insert a new sheet into the paper guide. The printer automatically advances the paper and resumes printing.

• Epson DLQ-3500, Micro Adjust Function (4/4) EPSON DLQ-3500 Quick Guide Adjusting the top-of-form position The top-of-form position is the position on the page where the printer starts printing. If your printing appears too high or low on the page, you can use the Micro Adjust function to adjust the top-of-form position. Follow these steps to adjust the top-of-form position: c Caution: Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position. Note: ❏ Your top-of-form position setting remains in effect until you change it, even if you turn off

• Epson DLQ-3500, Default Settings (4/4) EPSON DLQ-3500 Quick Guide Overlapping forms This setting takes effect only when the skip-over-perforation setting is on. When overlapping-forms setting is on, the printer lifts up the print head each time it makes a one-inch margin with the skip-over-perforation feature. You need to turn on both the overlapping-forms and the skip-over-perforation settings when you use overlapping forms. Changing default settings Note: ❏ To print the language selection and default-settin

• Epson DLQ-3500, Single Sheets with the Cut-Sheet Feeder (1/3) EPSON DLQ-3500 Quick Guide Single Sheets with the Cut-Sheet Feeder Loading paper to the cut-sheet feeder For single-sheet multipart forms, use only the type of forms that are glued at the top. To avoid paper jams, do not allow too many printed sheets to be stacked on the paper guide at one time. Remove the stack when it is half as thick as the paper loading limit marked on the cut-sheet feeder. Follow these steps to load paper to the cut-sheet feeder: 1. Pull t

More Instructions:

	Epson DLQ-3500 Operation & user’s manual 04-02-2024 182	DOWNLOAD
	Epson DLQ-3500 Setup manual 18-04-2023 30	DOWNLOAD
	Epson DLQ-3500 Notice 12-08-2023 1	DOWNLOAD
	Epson DLQ-3500 Reference manual 11-09-2022 170	DOWNLOAD

Related Products and Documents (Other):

Comparable Devices:

Similar Resources:

• Weslo Pursuit 612s (12 pages) USER’S MANUALCAUTIONRead all precautions andinstructions in this manualbefore using this equipment.Keep this manual for futurereference.Model No. WLEX20480Serial No. Write the serial number in thespace above for future reference.QUESTIONS?As a manufacturer, we are committed to providing com-plete customer satisfaction.If you have questions, or ifthere are …

• JRC JAX-9B (2 pages) For further information, contact:Since 1915Main Office: Nittochi Nishi-Shinjuku bldg. 10-1, Nishi-Shinjuku 6-chome Shinjuku-ku, Tokyo 160-8328, Japan   Telephone: +81-3-3348-4099   Facsimile: +81-3-3348-4139Overseas Branches : Seattle, Amsterdam, Athens Liaison Offices : Taipei, Manila, Jakarta, Singapore, Hanoi, Shanghai, Hamburg, New Yo …

• YORKVILLE LS608 - PARTS (1 pages) # Part# DescriptionLabeled Components1 Z388 LS608 GRILL2 Z391 LS608 GRILL BAR3 8929 #14X11/4 ALLEN FLHD WOOD SCRW J4 8259D "Y" LOGO ELITE SERIES LARGE DOMED5 8483 ADAPTER, SPEAKER STAND, METAL, BLACK6 8565 BAR HANDLE ALL METAL7 18/029Y4M 18" 8R 800WPGM SPEAKER8 8569 CORNER. 2 LEGS NO LIP BLACK OXIDE9 8562 CORNER. 3 LEGS BLACK OXIDE10 8547 PLAS …

• NordicTrack X7i Incline Trainer (38 pages) X7i Incline Trainer USERʼS MANUALCAUTIONRead all precautions and instructions inthis manual before using this equipment.Save this manual for future reference.CALL TOLL-FREE: 1-888-825-2588 Mon.–Fri. 6 a.m.–6 p.m. MT; Sat. 8 a.m.–4 p.m. MTON THE WEB: www.nordictrackservice.comQUESTIONS?If you have questions, or if parts are damagedor missing, DO NOT CO …

• ROBLIN VIZIO VERRE MURALE (60 pages) NOTICE D’INSTALLATION ET D’UTILISATION INSTRUCTIONS FOR INSTALLATION AND DIRECTIONS FOR USE MONTAGE- UND GEBRAUCHSANWEISUNGLIBRETTO DI ISTRUZIONIINSTRUCCIONES DE INSTALACION E UTILIZACIONMONTAGE- EN GEBRUIKSHANDLEIDINGVIZIO Murale Verre …

• ProForm 1250 Zlt Treadmill (36 pages) Etichetta delNº. di SerieNº del Modello PETL10810.0Nº di SerieRiportare il numero di serie nellospazio soprastante per eventuali co-municazioni future.ATTENZIONELeggere tutte le istruzioni e pre-cauzioni riportate in questo ma-nuale prima di utilizzare questaattrezzatura. Conservare il ma-nuale per ogni successivo riferi-mento.DOMANDE?Come fabbricanti, ci …

Comments, Questions and Opinions: