Kicker QS65.2 Owner's Manual
|
Kicker QS65.2, QS QSCOMPONENTSYSTEM QS65.2 QS60.2 English Version Versión Español Sistema de altavoces componentes QS Manual del Propietario Deutsche Version QS-Komponentensystem Benutzerhandbuch Version Française Système à composants QS Manuel d’utilisation 2009 QS Multilingual h01.indd 1 11/21/2008 10:54:11 AM
2 QSCOMPONENTSYSTEM QSCOMPONENTSYSTEMOwner’sManual QS COMPONENTS The KICKER QS-series component systems offer unmatched audio fi delity for vehicle applications. Whether you’re confi guring the ultimate multi-speaker and subwoofer surround system or simply upgrading from dull, lifeless factory speakers, the QS component systems deliver the most pleasing full- range sound on the market
Kicker QS65.2, 3 CONFIGURATION Before mounting and wiring the QS component system, determine which confi guration you will use for the speakers and crossover. QS Speaker Confi gurations ADVANTAGES CONSIDERATIONS Coaxial great for space-limited applications or when separate tweeter mounting is not possible high frequencies may not be as prominent | tweeter output may need to be increased at crossover Separates optimal sound quality and improved sonic imaging (with proper tweeter mounting) trickier install | vehicle must have a good tweeter mounting location QS Crossover Confi gurations ADVANTAGES CONSIDER
4 QSCOMPONENTSYSTEM CROSSOVER CONFIGURATION The KICKER QS crossover can be confi gured as a conventional 2-way crossover by installing the included INPUT jumper into the - MID + -TW + input terminals as shown in Fig. 2. In this confi guration, the amplifi ed signal from your source unit or amplifi er should be wired to the + and - terminals indicated on the INPUT jumper. The QS
Kicker QS65.2, 5 WIRING We recommend using 16 gauge (or larger) wire. The QS components are rated at 4 ohms and work with any source unit or amplifi er designed to operate at a 4 ohm load. Make sure your source unit or amplifi er is rated for 4 ohm operation. Crossover in 2-way confi guration | One component set per channel At least two amplifi er channels are needed for stereo operation (only one channel is shown)• - IN + OUT -MID+ OUT -TW+ -OUT+ + - + - + - + - + - + - - OUT + - IN + OUT -MID+ OUT -TW+ - IN + OUT -MID+ OUT -TW+ Crossover in 2-way confi guration
Kicker QS65.2, 6 QSCOMPONENTSYSTEM + - + - + - + - IN -MID+ IN -TW+ - OUT + MID OUT + TW - IN -MID+ -MID+ CH2 LEFT OUTPUT IN -TW+ -TW+ CH1 - OUT + MID OUT + TW - Crossover in bi-amp confi guration | One channel per component set Requires two complete QS systems (four woofers, four tweeters, four crossovers)• At least four amplifi er channels are needed for stereo operation (only two channels are shown)• Crossovers wired in series• + - + - IN -MID+ IN -TW+ - OUT + MID OUT + TW - -MID+ CH2 LEFT OUTPUT -TW+ CH1 Crossover in bi-amp confi guration Two cha
Kicker QS65.2, 7 WOOFER MOUNTING The KICKER QS components are designed for free-air applications and do not require a sealed enclosure for optimum performance. It is important to isolate the sound coming from the front of the speaker from the sound radiating from the back of the speaker. This is most easily accomplished by mounting the speakers in a vehicle’s factory locations or in a location with a semi-isolated rear chamber (like the rear deck of a car behind the rear seats). If you are replacing factory speakers in their original locations, you may have to enlarge the speaker cut-outs and pre-drill new screw holes using a 7/64” (2.5mm) bit. Custom mounting locations will require more p
Kicker QS65.2, 8 QSCOMPONENTSYSTEM Fig. 4 Flush Mounting the Tweeter TWEETER MOUNTING The tweeter can be mounted one of three ways: fl ush, angled, and coaxial mounting. For fl ush mounting applications, see Fig. 4. Choose a fl at location on the panel with space behind the panel to allow room for the mounting nut, motor structure, and tweeter post. After checking the clearances, cut a 1-13/16” (46mm) diameter mounting hole in the panel. Position the mounting nut behind the panel. Feed the wire through the optional fl ush ring, the hole in the panel, and the mounting nut. Mount the tweeter by screwing the mounting nu
Kicker QS65.2, 9 CROSSOVER MOUNTING Mount the crossover in a location that is easy to access for wiring and tweeter output level adjustment. Make sure that the crossover will not be exposed to water. The bottom of the car door is not a good location. If you must mount the crossover in the car door, exercise caution as water can accumulate in the bottom of the door. Keep the crossover high in the door and shielded from water. door jamb QS crossover. (mounted inside door panel) rubber grommets from amplifi er or source unit woofer mounting hole tweeter mounting hole to woofer terminals to tweeter lead wires If factory speaker wiring is not available in your desired location, it may be necessa
Kicker QS65.2, 11 ACOUSTICS LIMITED WARRANTY KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, KICKER will repair
DOWNLOAD |
Kicker 40iK5 Car Stereo System Owner's manual
40iK5 |
Kicker QS60.2 Car Stereo System Owner's manual
QS60.2 |
Kicker iKick iK501 Car Stereo System Owner's manual
iKick iK501 |
Kicker Amphitheater 40iK5BT2 Car Stereo System Owner's manual
Amphitheater 40iK5BT2 |
Kicker RS65.2 Car Stereo System Owner's manual
RS65.2 |
Kicker DS6.2 Car Stereo System Owner's manual
DS6.2 |
Kicker DDS12 Car Stereo System Owner's manual
DDS12 |
Kicker iKick iK150 Car Stereo System Owner's manual
iKick iK150 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | ParaBody | 909101 | Assembly instructions manual | parabody/909101-56A.pdf | 01 Oct 2022 | 15 | 0.82 Mb |
2 | Gembird | WNP-RP-001 | Installation manual | gembird/wnp-rp-001-1RS.pdf | 04 Jan 2024 | 7 | |
3 | Zephyr | ZF5 | Manual | zephyr/zf5-5S4.pdf | 25 May 2023 | 2 | |
4 | IKEA | Folklig AA-574715-1 | Manual | ikea/folklig-aa-574715-1-1D2.pdf | 03 Apr 2023 | 59 | |
5 | Avocent | PS/2 IP | Operation & user’s manual | avocent/ps2-ip-885.pdf | 22 May 2023 | 67 | 1.62 Mb |
6 | Tandy | 16-175 | Operation & user’s manual | tandy/16-175-A5S.pdf | 24 Apr 2023 | 4 | 0.05 Mb |
JVC
CASSETTE RECEIVER KS-FX250ENGLISHESPAÑOLRECEPTOR-REPRODUCTOR DECASSETTE KS-FX250RADIOCASSETTE KS-FX250INSTRUCTIONSMANUAL DE INSTRUCCIONESMANUEL D’INSTRUCTIONSFor customer Use:Enter below the Model No. andSerial No. which are located onthe top or bottom of the cabinet.Retain this information for futurereference.Model No.Serial No.FSUN3108-631[J]For install …
KS-FX250 - Radio / Cassette Player(29 pages) |
Sony
Thanks for your interest in servicemanuals.netAttached are a couple pages from the manual so you can make sure if it what you are looking for and so you can see the quality of the manuals we provide.We look forward to receiving your order. To order, please go to click here
…
CDX-M8810 - Fm/am Compact Disc Player(2 pages) |
Bogen
© 2008 Bogen Communications, Inc.Specifications subject to change without notice.54-2206-01C 1210CDR1CD Player with AM/FM Radio ReceiverUserʼs ManualSpecificationsFM TunerFrequency Range: 87.5 MHz to 108 MHzSensitivity: 3 μVAntenna: 75-ohm F-type coax300-ohm Dipole typeAM TunerFrequency Range: 530 kHz to 1620 kHzSensitivity: 100 μVAntenna: Loop-t …
CDR1(8 pages) |
Pioneer
English Français EspañolCD RDS RECEIVERAUTORADIO CD RDSREPRODUCTOR DE CD CON RECEPTOR RDSDEH-S5200BTDEH-S4220BTDEH-S4200BTOperation ManualMode d’emploiManual de operación Important (Serial number)The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Im …
DEH-S5200BT(56 pages) |
Sony
4-286-016-11(1)FM/AMDigital Media PlayerInstallation/ConnectionsInstalación/ConexionesDSX-S310BTX × 2× 4Equipment used in illustrations (not supplied)Equipo utilizado en las ilustraciones (no suministrado)Power amplifierAmplificador de potenciaFront speakerAltavoz frontalABFRONTAUDIO OUTREARAUDIO OUTSUB OUT (MONO)CautionsThis unit is …
DSX-S310BTX(2 pages) |
DLS
OWNERS MANUALCAR AUDIO AMPLIFIERSReference 100AReference 200ANOTE!Read this manual thoroughly before you start to installDLS Svenska ABBox 13029SE-402 51 GöteborgSwedenPhone +46 31 84 00 60Fax +46 31 84 40 21E-mail: [email protected] www.dls.se
…
AMPREFEN(17 pages) |
Ampro Corporation Computer Hardware ReadySystem 1U P/N 5001791AComputer Hardware Operation & user’s manual (Ampro Corporation ReadySystem 1U P/N 5001791A) ReadySystem 1U P/N 5001791A, 40 |
Pioneer DVD Player DV-2850-SDVD Player #9W7W92 DV-2850-S, 84 |
Indesit Refrigerator GS 164 I UKGS 164 I UK (Refrigerator ePDF User Manual, #2FO2R3) GS 164 I UK, 12 |
Mackie Music Mixer PPM1012Mackie PPM1012 Music Mixer Owner's manual PPM1012, 13 |
STEINEL Light Fixture studiolineLight Fixture PDF Operating instructions manual studioline, 47 |
Tripp Lite Inverter PV 400FCOwner's manual for Tripp Lite PV 400FC Inverter PV 400FC, 9 |
KitchenAid Ventilation Hood 9763393AInstallation instructions and use and care manual for KitchenAid 9763393A Ventilation Hood 9763393A, 36 |
Memrecam Digital Camera GX-5Memrecam Digital Camera GX-5 Operation & user’s manual GX-5, 177 |
Amplicom Telephone PowerTel 68 PlusAmplicom PowerTel 68 Plus User Manual (Operation & user’s manual), @O96FJ3 PowerTel 68 Plus, 50 |
CHIEF TV VCR Combo AVR1TV VCR Combo Installation instructions manual (CHIEF AVR1) AVR1, 8 |
VIORE TV LC42VXF120PBPDF User Guide (@5Y9X14), VIORE LC42VXF120PB TV (31st Jan 2024) LC42VXF120PB, 1 |
Philips Stereo System MAS-30037MAS-30037 Specifications - 6VL14U MAS-30037, 1 |