Korg MR-2000S Owner's Manual

Text of Korg MR-2000S User Guide:

• Korg MR-2000S, 36 Appendix Troubleshooting Power does not turn on • Is the power cable correctly connected? • Is the power LED lit green? →If the power LED is lit red, the MR-2000S is in standby mode. Press the power button to turn it on ( →p.9). Nothing appears in the display • Is the contrast adjusted correctly? (→p.29) No sound • Is the MR-2000S and the connected equipment pow- ered-on? ( →p.4) •Are the amp or headphone connections incorrect? • Is the headphone volume set to "0"? Can't hear the audio input •Are the recording settings correct? • Does the input source match the

• Korg MR-2000S, 5 Parts of the MR-2000S Front panel 1. Power button, power LED This turns the MR-2000S on or off (standby). The power LED will light-up green when on, and red when off (standby). If you disconnect the power cable, the power will be completely off and the power LED will go dark. When you re-connect the power cable, it will take approximately one second for the unit to return to off (standby) condition. When you turn this off, the shutdown process will occur automatically; do not disconnect the power cable until the display has gone

• Korg MR-2000S, 6 9. Display button When the home screen is shown in the display, pressing this button will switch the content shown in the counter display area ( → p.17). 10. Dial Use this dial to select projects ( → p.10) or files, to select parameters in various screens, and to specify values. In record-ready mode, this dial adjusts the level. 11. Stop button This button stops recording or playback 12. Playback/Pause button, Play LED This button starts recording or playback. Durin

• Korg MR-2000S, 26 Viewing a play list Here's how to view the contents of a play list. 1. Press the menu button, then in the menu list (MENU) screen, use the dial to select "LIBRARY" and press the enter button to confirm. The library select (LIBRARY) screen will appear. MR Project: This library contains projects recorded on the MR-2000S. Audio: This folder contains audio files recorded on a device other than the MR-2000S. Play List: This is the play list ( →p.25). 2. In the library select (LIBRARY) screen, use the dial to select "Play List," and press the enter button to confirm. The play list screen will appear. Editing a play list I

• Korg MR-2000S, 16 7. Other playback/editing operations Selecting the project/file to play Use the dial to select (or choose from a list) the project/file that you want to play. When you turn on the power, the most recently selected project/file will be selected. The order of the project/files The order of the projects/files in the folder on the library select screen (LIBRARY) is listed according to the order in which they were created (FAT order), but the folders can be sorted in alphabetical order and displayed that way also. E

• Korg MR-2000S, 19 6. When you've finished making settings, use the dial to select "Set" and press the enter button to con- firm. You will return to the system setting (SYSTEM) screen. If the power cable is left disconnected, the internal clock will stop operating after approximately one week. If you've left the power cable disconnected for an extended period of time, you'll need to make the date and time settings again after reconnecting the power cable. The time will continue to stay while you’re setting it. Editing the project/file name You can specify a name of up to sixteen characters, using uppercase alphabetical characters A

• Korg MR-2000S, 13 Selecting the input source Here's how to select the input source that you want to use. The audio signal from the input jack that you specify here will be the audio that is input during record-ready mode or while recording. With the factory settings, the clock source (→p.29) is set to Internal. An error will occur if you attempt to record in 1-bit format while S/P DIF is selected. 1. Press the menu button, use the dial to select "SYSTEM" from the menu list, and press the enter but- ton to confirm. The SYSTEM setting screen will appear. 2. In the SYSTEM setting s

• Owner’s Manual E E Owner’s Manual 4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan    2008 KORG INC. 2009 AH Printed in Japan IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be us

• Korg MR-2000S, 12 Order / total number in folder This shows the order of the projects/files within the specified folder, as well as the total number of projects/files in that folder. Project/file format This shows the format of the selected project/file (→p.28). Record/edit calendar indicator This shows the date and time at which the selected project/file was recorded or most recently edited (→p.18). Protect indicator A lock symbol is shown if the selected project is protected. Nothing is shown if th

• Korg MR-2000S, 28 Record mode Here you can adjust various settings related to recording. Press the menu button, and in the menu list (MENU) screen, use the dial to select "REC MODE" and then press the enter button to confirm. You can adjust the following settings from the record mode (REC MODE) screen. Project recording format (New Project Type) WAV (BWF) This is an uncompressed linear PCM multi-bit audio file format. The sampling frequency and bit-depth are selected by the PCM Format settings described below. The name is an abbreviation of Wave File Format (file extension .wav). This format is compatible with

• Korg MR-2000S, 24 Deleting all marks (Delete All Mark) 1. When you use the dial to select "Delete All Mark" and press the enter button to confirm, a dialog screen will ask you to confirm the deletion. 2. Use the dial to select [Yes] and press the enter button to confirm. If you decide not to delete the marks, use the dial to select [No] and press the enter button to confirm (or press the exit button), and you'll return to the mark edit select (Mark Edit) screen. 3. The screen will indicate "Working..." and the marks will be deleted. When deletion is finished, the d

• 31 Project name setting (Project Name) Here's how to assign the name for the project folder that is automatically created each time you record. Default Name: The name will be "file type (p.34)_0001--9999." Examples: DFF_0001, WAV_0001, etc. UserName: The name will be UserName0001--9999. You can use up to eight characters to specify this "

• Korg MR-2000S, 23 2. Use the dial to select the item that you want to edit, and press the enter button to confirm. Changing the time locations of the marks You can register marks in any position of the WAV, DFF or WSD project, but for the DSF project, only the 11.6 ms (Fs=2.8 MHz) or larger size mark can be registered by a unit of 5.8 ms (Fs=5.6 MHz). When the time locations are changed, each location is automatically set to the nearest position within its specified region. 1. When you use the dial to select the time, t

• Korg MR-2000S, 39 Main specifications Frequency response:10 Hz ... 20 kHz ± 1 dB @ Fs 44.1 kHz / 48 kHz 10 Hz ... 40 kHz ± 1 dB @ Fs 88.2 kHz/96 kHz/ 176.4 kHz/ 192 kHz 10 Hz ... 100 kHz (1-bit) S/N : 103 dB (typical) @ IHF-A THD+N : 0.005% (typical), 20 Hz ... 20 kHz A/D conversion : 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM) D/A conversion : 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM) LINE IN L/R XLR Connector : XLR-3-31 type (balanced) Input impedance : 22 kΩ Nominal level : + 4 dBu (REC LEVEL=0dB) Maxi

• 7 Rear panel 1. AC connector Connect the power supply cable (included) here. 2. USB connector This lets you use a USB cable to connect the MR-2000S to your computer. 3. WORD CLOCK OUT jack This jack outputs the same synchronization word clock as the project ( → p.10) or file. When operating in 1-bit format, this will output 44.1 kHz. 4. WORD CLOCK IN jack This jac

• Korg MR-2000S, 15 4. Use the dial to select the desired gain value, and press the enter button to confirm. The selection icon will change from " " to " ". Perform these steps for the left and right channels. Adjust the level so that the signal does not exceed the "0" marking. When you've finished setting the input volume, press the exit button to return to the menu list screen, and then press the menu button once again to return to the home screen. Starting and stopping recording Each time you record on the MR-2000S, a folder is created containing an

• Korg MR-2000S, 33 Using the MR-2000S with your computer You can use the MR-2000S as a USB 2.0 mass storage class device. This lets you copy files from the MR-2000S to your computer, or copy files (WAV, DSDIFF, etc.) from your computer into the MR-2000S There are limitations on the audio files that the MR-2000S can recognize (p.33). USB mode In this mode, the MR-2000S will be detected by your com- puter as an external hard disk. The MR-2000S won't operate as a recorder while it is in USB mode. Entering USB mode 1. Connect the MR-2000S to your computer. Windows users (Windows

• Korg MR-2000S, 11 5. The home screen When you turn on the power, the home screen is shown in the display. When the menu list (MENU) screen is shown, you can also access the level meter screen by pressing the menu button. This screen shows information such as the MR-2000S's operating status and recording/playback format. Calendar indicator This shows the current date and time (→p.18). DSD filter indicator This will appear if the DSD filter is on (→p.30). Playback mode indicator The current playback mode icon (→p.25) will appear. All/Shuffle indicator This indicator is shown if you've selected

• Korg MR-2000S, 41 Recording 12 Recording format 13 , 28 Recording time 28 Reference level 29 Rename 19 Repeat 25 Repeat indicator 11 Reset 31 Rewind 10 S Selecting the project 16 Shuffle 25 Single 25 Specification 38 Synchronization 29 System 29 T TOTAL 17 Total number 12 TOTAL REMAIN 17 Troubleshooting 36 U Update 32 USB mode 33 User name 31 W WAV (BWF) 28 Windows 35 WSD 28

• Korg MR-2000S, Page 2 IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers

More Instructions:

Korg MR-2000S Update manual 02-02-2023 2

DOWNLOAD

Related Products and Documents (CD Player):

Comparable Devices:

Similar Resources:

• Denon DCM-380 (35 pages) SERVICE MANUALSTEREO CD PLAYERMODEL DCM-380/280For U.S.A., Canada, Europe, U.K.& Australia model1 Some illustrations using in this service manual are slightly different from the actual set.16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034 JAPANTelephone: 03 (3837) 5321X-0162 NC 0211 …

• Samsung MAX-N72 (44 pages) 3 CD CHANGER MINI MINI COMPONENTMAX-N72/73/75SERVICEManualMIMI MIMI COMPONENT SYSTEM CONTENTSDisc 1 Disc 2 Disc 3Disc ChangeOpen/CloseGameDemoPTYDisplayTimer/ClockRev Mode Deck 1/2Counter ResetNormalCD REC/PauseHighDubbingMono/STPreset/MemoryREC/PauseProgramTAPEVolumeCDTUNERBandCD RepeatShuffle CD SynchroS.BASSowerSurroundEQ3D SurroundAUXOn/Standby+–RDSPre …

• RCA RCD159 (2 pages) Top-Load CD Player with mp3 Playback – CD player is conveniently locatedon top of the unit for fast and easy access mp3, CD-R / CD-RW Playback – The player is able to play mp3, CD-R & CD-RW discsDigital AM/FM Tuner with 20 Presets – Allows for exact station tuning and fast channel changing. 20 stations can be stored in memory for quickfuture acces …

• Aiwa XP-V703 (2 pages) anwaLas Ietras subrayadas a 10Iargo de este manual corresponded a Ias mismas Ietrasen Ias figuras.Les Iettres en 6vidence clans ce mode d’emploi correspondent ~ celles desillustrations,OWNER’S RECORDFor your convenience, record the model number and the serial number (you willfind it on the bottom of your set) in the space provided below. Please refer to …

• Onix CD - 10 (24 pages) COMPACT DISC PLAYERLETTORE COMPACT DISKLECTEUR DE DISQUE COMPACTCD-SPIELERREPRODUCTOR DE DISCOS COMPACTOSMod. CD - 10MANUALE D’USOUSER'S GUIDEGUIDE DE L'UTILISATEURBEDIENUNGSANLEITUNGGUÍA DEL USUARIOPOWERONOFFSEARCH/SKIPOPEN/CLOSESTOPPLAY/PAUSE~ /2 2 0 V 5 0 H zUSE O NLY WITH A 250 V FUS EAC INFU SE 100V - 1 20V: T1AL22 0V - 24 0V: T5 00m ALMO D …

• Clarion DXZ665MP (31 pages) Clarion Co., Ltd.All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.Printed in China / Imprimé en Chine / Impreso en China2005/12PE-2788B280-8331-00CD/MP3/WMA RECEIVER/CeNET CONTROLRÉCEPTEUR CD/MP3/WMA : COMMANDE CeNETRECEPTOR Y REPRODUCTOR DE CD/MP3/WMA/ CONTROL DE CeNETDXZ665MPOwner’s manualMode d’emploiManual de instrucciones …

Comments, Questions and Opinions: